A time-of-flight backscattering spectrometer at the Spallation Neutron Source, BASIS

The high energy resolution, coupled with the wide dynamic range, of the new backscattering spectrometer (BASIS) at the Spallation Neutron Source, Oak Ridge National Laboratory, has made it possible to investigate the diffusion dynamics of hydration water on the surface of rutile (TiO2) nanopowder down to a temperature of 195 K. The dynamics measured on the BASIS on the time scale of tens of picoseconds to more than a nanosecond can be attributed to the mobility of the outer hydration water layers. The data obtained on the BASIS and in a previous study using the backscattering and disk-chopper spectrometers at the NIST Center for Neutron Research are coupled with molecular dynamics simulations extended to 50 ns. The results suggest that the scattering experiments probe several types of molecular motion in the surface layers, namely a very fast component that involves dynamics of water molecules with unsaturated hydrogen bonds, a somewhat slower component due to localized motions of all water molecules, and...

The Department of Energy (DOE) has given the Spallation Neutron Source (SNS) project approval to begin Title I design of the proposed facility to be built at Oak Ridge National Laboratory (ORNL). During the conceptual design phase of the SNS project, the target station bulk-biological shield was characterized and the activation of the major target station components was calculated. Shielding requirements were assessed with respect to weight, space, and dose-rate constraints for operating, shutdown, and accident conditions utilizing the SNS shield design criteria, DOE Order 5480.25, and requirements specified in 10 CFR 835. Since completion of the conceptual design phase, there have been major design changes to the target station as a result of the initial shielding and activation analyses, modifications brought about due to engineering concerns, and feedback from numerous external review committees. These design changes have impacted the results of the conceptual design analyses, and consequently, have required a re-investigation of the new design. Furthermore, the conceptual design shielding analysis did not address many of the details associated with the engineering design of the target station. In this paper, some of the proposed SNS target station preliminary Title I shielding design analyses will be presented. The SNS facility (with emphasis on the target station), shielding design requirements, calculational strategy, and source terms used in the analyses will be described. Preliminary results and conclusions, along with recommendations for additional analyses, will also be presented.

DOE proposes to construct and operate a state-of-the-art, short-pulsed spallation neutron source comprised of an ion source, a linear accelerator, a proton accumulator ring, and an experiment building containing a liquid mercury target and a suite of neutron scattering instrumentation. The proposed Spallation Neutron Source would be designed to operate at a proton beam power of 1 megawatt. The design would accommodate future upgrades to a peak operating power of 4 megawatts. These upgrades may include construction of a second proton accumulator ring and a second target. The U.S. needs a high-flux, short-pulsed neutron source to provide the scientific and industrial research communities with a much more intense source of pulsed neutrons for neutron scattering research than is currently available, and to assure the availability of a state-of-the-art facility in the decades ahead. This next-generation neutron source would create new scientific and engineering opportunities. In addition, it would help replace the neutron science capacity that will be lost by the eventual shutdown of existing sources as they reach the end of their useful operating lives in the first half of the next century. This document analyzes the potential environmental impacts from the proposed action and the alternatives. The analysis assumes a facility operating at a power of 1MW and 4 MW over the life of the facility. The two primary alternatives analyzed in this EIS are: the proposed action (to proceed with building the Spallation Neutron Source) and the No-Action Alternative. The No-Action Alternative describes the expected condition of the environment if no action were taken. Four siting alternatives for the Spallation Neutron Source are evaluated: Oak Ridge National Laboratory, Oak Ridge, TN, (preferred alternative); Argonne National Laboratory, Argonne, IL; Brookhaven National Laboratory, Upton, NY; and Los Alamos National Laboratory, Los Alamos, NM.

This document introduces the planned new search for the neutron Electric Dipole Moment at the Spallation Neutron Source at the Oak Ridge National Laboratory. A spin precession measurement is to be carried out using Ultracold neutrons diluted in a superfluid Helium bath at T = 0.5 K, where spin polarized 3He atoms act as detector of the neutron spin polarization. This manuscript describes some of the key aspects of the planned experiment with the contributions from Caltech to the development of the project. Techniques used in the design of magnet coils for Nuclear Magnetic Resonance were adapted to the geometry of the experiment. Described is an initial design approach using a pair of coils tuned to shield outer conductive elements from resistive heat loads, while inducing an oscillating field in the measurement volume. A small prototype was constructed to test the model of the field at room temperature. A large scale test of the high voltage system was carried out in a collaborative effort at the Los Alamos National Laboratory. The application and amplification of high voltage to polished steel electrodes immersed in a superfluid Helium bath was studied, as well as the electrical breakdown properties of the electrodes at low temperatures. A suite of Monte Carlo simulation software tools to model the interaction of neutrons, 3He atoms, and their spins with the experimental magnetic and electric fields was developed and implemented to further the study of expected systematic effects of the measurement, with particular focus on the false Electric Dipole Moment induced by a Geometric Phase akin to Berry’s phase. An analysis framework was developed and implemented using unbinned likelihood to fit the time modulated signal expected from the measurement data. A collaborative Monte Carlo data set was used to test the analysis methods.

The Spallation Neutron Source (SNS) is an accelerator-based neutron source at Oak Ridge National Laboratory (ORNL). The nuclear spallation reaction occurs when a proton beam hits liquid mercury. This interaction causes thermal expansion of the liquid mercury which produces high pressure waves. When these pressure waves hit the target vessel wall, cavitation can occur and erode the wall. Research and development efforts at SNS include creation of a vertical protective gas layer between the flowing liquid mercury and target vessel wall to mitigate the cavitation damage erosion and extend the life time of the target. Since mercury is opaque, computational fluid dynamics (CFD) has been used to visualize the general behavior of a protective gas layer arising from various delivery and retention concepts as a guide for design of experimental efforts. Recent advancements in capacity for large scale CFD modeling via the high performance compute systems of ORNL now enable high-fidelity simulation approaching full geometric scale. Accordingly, in this study, CFD simulations of three dimensional, unsteady, turbulent, two-phase flow of helium gas injection in flowing liquid mercury over textured walls are carried out for target design purposes with the commercially available CFD code STARCCM+. The Volume of Fluid (VOF) model is used to track the helium-mercury interface. Different combinations of conical pits and V-shaped straight grooves at different orientations with respect to the gravity vector are simulated at the SNS proton beam window to increase the helium gas holdup. Time integration of predicted helium gas volume fraction over time is done for the design alternatives considered to compare the gas coverage and average thickness of the helium gas layer.

The Department of Energy (DOE) has given the Spallation Neutron Source (SNS) project approval to begin Title I design of the proposed facility to be built at Oak Ridge National Laboratory (ORNL) and construction is scheduled to commence in FY01. The SNS initially will consist of an accelerator system capable of delivering an approximately 0.5 microsecond pulse of 1 GeV protons, at a 60 Hz frequency, with 1 MW of beam power, into a single target station. The SNS will eventually be upgraded to a 2 MW facility with two target stations (a 60 Hz station and a 10 Hz station). The radiation transport analysis, which includes the neutronic, shielding, activation, and safety analyses, is critical to the design of an intense high-energy accelerator facility like the proposed SNS, and the Monte Carlo method is the cornerstone of the radiation transport analyses.KeywordsTarget StationDiscrete OrdinateSpallation Neutron SourceDrift Tube LinacSingle Target StationThese keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory provides an intense, high-quality source of neutrinos from pion decay at rest. This source was recently used for the first measurements of coherent elastic neutrino–nucleus scattering (CEvNS) by the COHERENT Collaboration, which resulted in new constraints of physics beyond the Standard Model. The SNS neutrino source will enable further CEvNS measurements, exploration of inelastic neutrino–nucleus interactions of particular relevance for understanding supernova neutrinos, and searches for accelerator-produced sub-GeV dark matter. Taking advantage of this unique facility, COHERENT's suite of detectors in Neutrino Alley at the SNS is accumulating more data to address a broad physics program at the intersection of particle physics, nuclear physics, and astrophysics. This review describes COHERENT's first two CEvNS measurements, their interpretation, and the potential of a future physics program at the SNS.

Neutrons In solid state Chemistry and the Earth Sciences Today and Tomorrow, also known as NICEST, was the title of the meeting held from March 12-16, 2003 in Oak Ridge, Tennessee. Sponsored by Oak Ridge Associated Universities, The University of Tennessee, Oak Ridge National Laboratory (ORNL), The University of Virginia, and Virginia Polytechnic Institute and State University, thethree-day workshop attracted 110 registrants, with 55 attending the short courses that followed the workshop. The workshop was coordinated by the Joint Institute for Neutron Sciences (JINS) and ORNL's Spallation Neutron Source (SNS). Additional funding for attendees scholarships was provided by the COMPRES consortium.

Over the past decade, wavelength-dependent neutron radiography, also known as Bragg-edge imaging, has been employed as a non-destructive bulk characterization method due to its sensitivity to coherent elastic neutron scattering that is associated with crystalline structures. Several analysis approaches have been developed to quantitatively determine crystalline orientation, lattice strain, and phase distribution. In this study, we report a systematic investigation of the crystal structures of metallic materials (such as selected textureless powder samples and additively manufactured (AM) Inconel 718 samples), using Bragg-edge imaging at the Oak Ridge National Laboratory (ORNL) Spallation Neutron Source (SNS). Firstly, we have implemented a phenomenological Gaussian-based fitting in a Python-based computer called iBeatles. Secondly, we have developed a model-based approach to analyze Bragg-edge transmission spectra, which allows quantitative determination of the crystallographic attributes. Moreover, neutron diffraction measurements were carried out to validate the Bragg-edge analytical methods. These results demonstrate that the microstructural complexity (in this case, texture) plays a key role in determining the crystallographic parameters (lattice constant or interplanar spacing), which implies that the Bragg-edge image analysis methods must be carefully selected based on the material structures.

Investigated in this work were sensitivities of a prototype detector for the detection of low-mass dark matter particles produced at the Spallation Neutron Source at the Oak Ridge National Laboratory in 2 years of data taking. The presumed prototype consisted of 10 kg undoped CsI or NaI scintillation crystals directly coupled with SiPM arrays operated at 77 K. Compared to the COHERENT CsI(Na) detector, a much higher light yield was assumed for the prototype. An experiment with a cylindrical 1 kg undoped CsI crystal coupled directly to two photomultiplier tubes at about 77 K was conducted as the first step to verify the idea. A light yield of 26.0 pm 0.4 photoelectrons per keV electron-equivalent was achieved. This eliminated the concern of self light absorption in large crystals raised in some of the early studies.

Exposure of materials to extreme pressure induces complex structural distortions, disorder, and phase transformations which effect their electronic, magnetic, and mechanical properties. These structural deviations, however, can be challenging to characterize with Bragg scattering alone. Neutron total scattering, with an increased sensitivity to low-Z elements, is a powerful tool for analyzing these changes by revealing local atomic configurations. Despite this, total scattering experiments at extreme pressure have remained rare in literature due to the increased experimental complexity compared with total scattering experiments at ambient conditions. In the experiments that have been performed, Q-ranges are limited due to the more complex neutron attenuation caused by the changing instrument geometry and gasket deformation. We have investigated the potential for performing similar experiments at the SNAP instrument at the Spallation Neutron Source at Oak Ridge National Laboratory. SNAP is an ideal instrument for total scattering as it boasts the most intense neutron flux among beamlines specialized for high pressure work. Further, spallation sources are ideal for total scattering experiments as they provide higher energy neutrons than available at reactor sources which extends the potential Q-range of the measurement. We have used the SNAP instrument to characterize Y2Zr2O7, which is a disordered fluorite-structured oxide with a distinct local Weberite-type (characteristic of A3BO7 oxides) phase that is not detectable through long range structural techniques. The quality of the captured total scattering data at ambient conditions and at high pressure is discussed and compared to data collected on NOMAD, a dedicated neutron total scattering instrument at the same facility.

The macromolecular neutron diffractometer at the spallation neutron source.

The Spallation Neutron Source (SNS), currently under construction at Oak Ridge National Laboratory with an anticipated start-up in early 2006, will provide the most intense pulsed beams of cold neutrons in the world. At a projected power of 1.4 MW, the time averaged fluxes and fluences of the SNS will approach those of high flux reactors. One of the flight paths on the cold, coupled moderator will be devoted to fundamental neutron physics. The fundamental neutron physics beamline is anticipated to include two beam-lines; a broad band cold beam, and a monochromatic beam of 0.89 nm neutrons for ultracold neutron (UCN) experiments. The fundamental neutron physics beamline will be operated as a user facility with experiment selection based on a peer reviewed proposal process. An initial program of five experiments in neutron decay, hadronic weak interaction and time reversal symmetry violation have been proposed.

The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory is a pulsed source of neutrons and, as a by-product of this operation, an intense source of pulsed neutrinos via stopped-pion decay. The COHERENT collaboration uses this source to investigate coherent elastic neutrino-nucleus scattering and other physics with a suite of detectors. This work includes a description of our geant4 simulation of neutrino production at the SNS and the flux calculation which informs the COHERENT studies. We estimate the uncertainty of this calculation at the $\ensuremath{\sim}10%$ level based on validation against available low-energy ${\ensuremath{\pi}}^{+}$ production data.

An experiment measuring neutrino-nucleus cross sections has been proposed to the Spallation Neutron Source (SNS) under construction at the Oak Ridge National Laboratory (ORNL). The 1 GeV proton beam, incident on a liquid mercury target, produces a flux of 1015 neutrinos/sec (nu) from the decays of pions and muons that have been brought to rest in the neutron production target. In order to measure the neutrino-nucleus interaction with nuclei, two neutrino detectors will be placed 22 meters from the neutron source. The electronic readout of one of these proposed detectors is discussed in this paper. This detector consists of approximately 20500 straw tubes interlaced with 20 tons of target foils (e.g., iron), and allows the measurement of the charged-current, neutrino-nucleus cross section with <10% accuracy.