A vertical-oriented WS2 nanosheet sensitized by graphene: an advanced electrocatalyst for hydrogen evolution reaction.

Fabrication of Te@NiTe2/NiS heterostructures for electrocatalytic hydrogen evolution reaction

The effective utilization of clean energy and finding alternatives to fossil resources are highly important to ensure the sustainability of human society and are always among the major goals of both chemistry and material science research. Advanced electrochemical devices, such as fuel cells, water electrolysers and metal-air batteries, represent the most promising strategies for clean-energy utilization. In an electrochemical device, the redox reactions are spatially separated by a membrane, allowing direct extraction/transfer of electrons at an electrode-electrolyte interface, which leads to higher intrinsic energy conversion efficiencies, milder process conditions, easy product separation and excellent design features for coupling to renewable energy infrastructure. The performance of such electrochemical processes is fundamentally determined by the physicochemical properties of the electrochemical interfaces, encompassing both the electrocatalyst and the structure of the adjacent electrochemical double layer. Specifically, electrocatalysts play key roles in electrochemical reactions and often limit the performance of entire systems due to their insufficient activity, low durability or high cost. Ideally, the rate, efficiency, and selectivity of the above electrochemical reactions can be substantially improved by developing high-performance electrocatalyst. One of the central tasks for chemists and material scientists is to design and fabricate the high-efficient efficiency but low-cost electrocatalysts systems. The current promising electrochemical reactions mainly focus on the realization of the reversible conversion between chemical and electricity energy, e.g., the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen oxidation reaction (HOR), and hydrogen evolution reaction (HER). Coupling of the above electrochemical reactions provide a solid foundation for various essential electrochemical devices, such as direct hydrogen fuel cells (HOR + ORR); electrolysers (OER + HER); rechargeable zinc (Zn)-air battery (ORR + OER). Therefore, this thesis aims to design and synthesize high-performance electrocatalysts for HER, ORR and OER based on earth-abundant materials with proper hierarchical 2D or 3D nanostructures. Combined with the advanced characterization techniques and density functional theory (DFT) calculations, the relationship between the electrochemical activity and active sites of these earth-abundant electrocatalysts were detailedly explored and confirmed. Furthermore, to emphasize the hierarchical 2D or 3D nanostructures, the actual performance of these electrocatalysts was all evaluated in practical devices including Zn-air battery and proton exchange membrane fuel cell (PEMFC), specifically as follows: (1) The vast majority of the reported HER electrocatalysts performs poorly under alkaline conditions due to the sluggish water dissociation kinetics. In the first work, a hybridization catalyst construction concept is presented to dramatically enhance the alkaline HER activities of catalysts based on 2D transition metal dichalcogenides (TMDs) (MoS2 and WS2). A series of ultrathin 2D-hybrids are synthesized via facile controllable growth of 3d metal (Ni, Co, Fe, Mn) hydroxides on the monolayer 2D-TMD nanosheets. The resultant Ni(OH)2 and Co(OH)2 hybridized ultrathin MoS2 and WS2 nanosheet catalysts exhibit significantly enhanced alkaline HER activity and stability compared to their bare counterparts. The combined theoretical and experimental studies confirm that the formation of the heterostructured boundaries by suitable hybridization of the TMD and 3d metal hydroxides is responsible for the improved alkaline HER activities because of the enhanced water dissociation step and lowers the corresponding kinetic energy barrier by the hybridized 3d metal hydroxides. (2) Nitrogen-coordinated iron atoms on carbon matrix (Fe-N-C) materials are the most active Pt-group-metal-free ORR catalysts but still suffering their low stability and relatively lower activity compared to platinum-based materials. In the second work, Fe and Ni dual sites atomically dispersed in hierarchically ordered macroporous carbon support (Fe-Ni/N-HOMC) was designed and successfully prepared. Isolated atomic Fe- N4 and Ni-N4 active sites were confirmed via various characterizations. The ORR activity and stability of Fe-Ni/N-HOMC in both acid and alkaline electrolyte were much higher than commercial Pt/C and the mono-Fe doping counterpart, which was among the state-of-the-art ORR electrocatalysts. In addition, this 3D ordered interconnected macroporous structure with abundant mesopores and micropores could greatly increase the accessible ORR active site and also enhance the mass transport during the ORR process. When employed as cathodes for PEMFC, we found the excellent ORR activity of Fe-Ni/N-HOMC was completely translated to the cathode in the fuel cell. (3) High-performance bifunctional electrocatalysts with ORR and OER activity is the key to developing efficient rechargeable Zn-air batteries. In the third work, a high-performance bifunctional electrocatalysts for both OER and ORR were synthesized via further hybridizing as-prepared Fe-Ni/N-HOMC with NiFe layer double hydroxides (LDHs). Layered double hydroxides (LDHs) have been reported to be promising OER electrocatalysts with ultrahigh OER performances. The as-synthesized new composites exhibited almost the same ORR activity as Fe-Ni/N-HOMC, revealing that hybridization of NiFe-LDHs would not deteriorate the initial ORR activity. Moreover, the remarkable enhancement of OER activity was observed after the hybridization, which was attributed to the strong coupling of uniformly dispersed small NiFe-LDH nanoparticles with the carbon substrate. The prototype Zn-air battery was assembled using these new composites, which displayed the ultralow voltage gap and long-term stability. (4) Compared with Fe-N-C or Co-N-C based ORR electrocatalysts, the Cu-nitrogen-carbon composites were attracted little attention. However, the natural multicopper oxidases (MCOs) enzymes, such as laccase, can serve as efficient ORR catalyst with almost no overpotential. Inspired by their tris-copper centers in MCO, one novel Cu-nitrogen-carbon composite (Cu SAs/N-CS) with atomic Cu coordination sites were synthesized via the pyrolysis of the Cu-involved metal-organic-framework. The copper contents in Cu SAs/N-CS reaches as high as 3.17 wt.%, and the average distances of adjacent copper sites was around only 3.1 Å. Due to the synergetic effect of abundant single atomic copper active sites with closer distance and ultrathin carbon nanosheet structure, Cu SAs/N-CS exhibited superior ORR activity exceeding commercial Pt/C catalyst, methanol tolerance, and long-term stability in both alkaline and neutral electrolyte. In summary, four kinds of new composites were successfully designed and prepared as high-performance electrocatalysts for HER, ORR and OER. Multi-dimensional heterostructures, atomic metal coordination sites and 3D hierarchically porous structure were designed and observed, which contributed greatly to improve activities of these composites. This thesis suggests several new viewpoints in the design of electrocatalysts based on earth-abundant materials: (i) offering new strategies for the preparation of novel 2D and 3D heterostructures as electrocatalysts; (ii) expanding methods for the synthesis of atomic metal coordination sites and evaluating their activities for ORR; (iii) evaluating the practical performances of achieved electrocatalysts in proton exchange membrane fuel cell and Zn-air battery; (iv) attempting to explain reaction mechanisms of some electrocatalysts by DFT calculation.

Structure–function relationship of electrodeposited MoSx film in N, N-dimethyl-formamide/H2O mixture solvent as electrocatalyst for hydrogen evolution

Surface modification engineering on three-dimensional self-supported NiCoP to construct NiCoOx/NiCoP for highly efficient alkaline hydrogen evolution reaction

In situ cathodic activation (ISCA) of V-incorporated NixSy nanowires supported on nickel foam (VS/NixSy/NF) can be realized in an alkaline hydrogen evolution reaction (HER) process, which provides not only clearly enhanced activity but also ultrahigh stability for HER. The ISCA process is continuous linear sweep voltammetry (LSV) on VS/NixSy/NF as a cathodic electrode with gradually enhanced HER activity. The activated VS/NixSy/NF (A-VS/NixSy/NF) demonstrates enhanced HER activity with an overpotential of 125 mV to drive 10 mA cm-2, which is much lower than that of other samples. It may be predicted that the ISCA-derived amorphous VOOH film covering on A-VS/NixSy/NF accelerates the HER process, and NiOOH may protect active sites from decaying, leading to excellent activity and structural stability. However, for single metal sulfides, the ISCA process of nickel or vanadium sulfides is not available, implying that the synergistic effect between Ni and V of VS/NixSy/NF may be the key to drive ISCA in alkaline HER. In addition, its ultra-high stability confirms that the stable active sites and nanostructures of A-VS/NixSy/NF are derived from ISCA. Therefore, the ISCA of V-incorporated transition metal sulfides in the alkaline HER process may be a facile and promising method to obtain efficient electrocatalysts.

Optimizing electronic structure and surface morphology are of great importance to achieve highly active and stable electrocatalyst for hydrogen evolution reaction (HER). In this paper, the vertically aligned Cu doped Ni/Ni3S2 nanosheet was successfully deposited on Ti mesh (NiCux/Ni3S2/TM, x = Cu/Ni atomic ratio in NiCux) by facile electrodeposition method. Phase composition, surface morphology and electronic structure information were characterized by XRD, SEM, TEM and XPS. The results unraveled that Cu doping induced the changes in both electronic structure and surface morphology of Ni/Ni3S2 sample, which were in favor of promoting the breakage of H-O bond in H2O and optimizing Ni-Hads adsorption energy, thus improving HER activity with decreased overpotential at −10 mA/cm2 by 202 mV. The influence of Cu(NO3)2 precursor content on HER activity of as-prepared NiCux/Ni3S2/ TM was investigated. NiCu0.57/Ni3S2/TM prepared with 1.2 mM Cu(NO3)2 exhibited the highest electrocatalytic activity toward HER with overpotential of 239 mV at −10 mA/cm2 and Tafel slope of 86 mV/dec. The enhanced activity and superior stability for NiCu0.57/Ni3S2/TM were ascribed to the change in electronic structure and surface morphology.

Exploring catalysts with low cost and excellent performance for the hydrogen evolution reaction (HER) is still a significant challenge. In this work, zeolitic imidazolate framework 8 (ZIF-8), hybridized with polyvinylpyrrolidone, was used to prepare Zn, Ni co-loaded N-doped porous carbon (ZnNi/NPC) via a straightforward absorption and pyrolysis process. The as-prepared ZnNi/NPC was used as a catalyst for the HER. This experiment showed that the porous structure and Ni doping have a significant influence on the HER activity of the catalyst. Compared with Zn/NC and Zn/NPC, ZnNi/NPC exhibits superior HER activity with an overpotential of 198 mV and a Tafel slope of 69.2 mV dec−1. ZnNi/NPC also shows excellent physical and chemical stability during the HER process. Considering the lower cost and excellent HER performance of ZnNi/NPC, this work provides an attractive solution to fabricate non-precious materials and offers a possible new strategy to replace Pt-based electrocatalysts for HER.

Transition-metal Mo-based materials have been considered to be among the most effective hydrogen evolution reaction (HER) electrocatalysts. Regulating the electronic structure of Mo atoms with guest metal atoms is considered as one of the important strategies to improve their HER activity. However, introduction of guest metal elements in the vicinity of Mo sites with atomic-level hybridization is difficult to realize, resulting in the failure of the modified electronic structure of Mo sites. Herein, an Fe1.89Mo4.11O7/MoO2 material is prepared through the thermal treatment of a ferrimolybdate precursor. It exhibits a Tafel slope of 79 mV dec-1 and an exchange current density of 0.069 mA cm-2 in 1 M KOH medium, as well as a Tafel slope of 47 mV dec-1 and an exchange current density of 0.072 mA cm-2 in 0.5 M H2SO4 medium. Compared to original Mo-based oxides, Fe1.89Mo4.11O7 with the regulated Mo electronic structure shows a more suitable Mo-H bond strength for the fast kinetics of the HER process. Density functional theory (DFT) calculations also indicate that the Mo-H bond strength in Fe1.89Mo4.11O7 is similar to the Pt-H bond strength, resulting in the high kinetic activity of Mo-based HER electrocatalysts in alkaline and acidic media.

The exploration of economical and highly efficient electrocatalysts for hydrogen evolution reaction (HER) is paramount for the development of sustainable hydrogen economy. Herein, a novel three‐dimensional (3D) hierarchical microflower electrocatalyst comprised of N‐doped carbon‐armored Ni3P/Ni/VN heterogeneous nanoparticles (Ni3P/Ni/VN@NC) is developed by combining a hydrothermal method with in‐situ carbonization‐phosphating strategy. The unique robust hierarchical structure derived from 3D NiV layered double hydroxide (NiV‐LDH) skeleton as precursor provides multidimensional mass and charge transport channels as well as numerous active sites for HER, leading to the improved HER activity. More importantly, the possible electron transfer route of Ni3P→Ni→VN is demonstrated due to the charge pumping capability of VN during interfacial electron intercoupling among the tri‐component, which endows Ni3P/Ni/VN with the favorable absorption of hydrogen‐intermediates and thus upgraded HER kinetics over such heterostructure. The resulting Ni3P/Ni/VN@NC catalyst exhibits extremely low overpotentials of 81 mV and 134 mV to deliver a current density of 10 mA cm−2 without iR‐compensation in alkaline and acidic media, respectively, and maintains continuous operation for over 90 h. This work enlightens the rational design of hierarchical multi‐component heterostructured catalysts for efficient hydrogen production.

Electrocatalysts for hydrogen evolution reaction (HER) from water splitting have been widely studied as one of the efficient energy storage methods by producing hydrogen (H2), the important clean energy resource. The best-known electrocatalyst for HER is platinum (Pt) that is expensive and scarce on earth. Molybdenum disulfide (MoS2) has attracted great attentions as one of promising catalysts for replacing Pt not only because of the relatively low cost and earth abundancy but also great HER activity, selectivity and stability as a great catalyst. Since the edge site of MoS2 was proved as an active site for HER, a great number of efforts on maximally exposing edge site have contributed to the studies about MoS2 based catalysts for HER. The basal plane of MoS2 is catalytically inert for HER since the free energy of adsorbed hydrogen (delGH*) known to a great descriptor for activation energy is thermodynamically uphill (~1.92eV) compared with that of active edge site (~0.06eV). However, sulfur (S) vacancy in the basal plane was very recently investigated as a new active site for HER demonstrating the basal plane that composes the majority part of MoS2 can be utilized for HER. Diverse methods to generate S-vacancy to make a use of the basal plane of MoS2 for efficient HER catalysts have been investigated such as Ar plasma treatment, hydrogen annealing and electrochemical desulfurization. However, HER activity of desulfurized MoS2-x still needs to be improved to be competitive with the HER activities of platinum. Cobalt is one of the non-precious metal promotors for MoS2 based catalysts for hydrogen evolution reaction, water gas shift reaction and oxygen reduction reaction. In very recently, Co was doped in the basal plane of S-vacancy rich MoS2 and Co-SMoS2 achieved a great catalytic activity for the hydrodeoxygenation (HDO) reaction. Since S-vacancy site is coordinatively unsaturated and has a high surface free energy like edge site, it is expected to provide a great nucleation site for doping or anchoring transition metal atoms or clusters. Thus, Co promotor can be employed for enhancing the catalytic activity of the basal plane of MoS2 based catalysts. Herein we report the great HER activity enhancement of the catalytically inert basal plane of MoS2 by combining the catalytic effects of S-vacancy and Co cluster addition as a non-precious metal oxide promotor. We use both density functional theory (DFT) calculations and experiments to support the claim. The polycrystalline 2H phase MoS2 multilayer whose basal plane is dominantly exposed was synthesized on fluorine-doped tin oxide (FTO) and carbon foam electrodes through thermolysis in the tube furnace. S-vacancy was generated on the basal plane of MoS2 through the same electrochemical desulfurization method. On top of that, Co cluster was electrodeposited to further promote the HER activity of the basal plane under different desulfurization conditions. Consequently, we demonstrate S-vacancy plays a critical role for Co nucleation during electrodeposition and thus both electrochemically active surface area and the intrinsic catalytic activity increased. Especially, the overpotential at -10 mA/cm2 was reduced around 300mV making the inert basal plane of MoS2 have comparable overpotential about -0.21 V vs. RHE at -10 mA/cm2 with the state of the art non-precious MoS2 based catalysts.

The exploitation of renewable wind and solar energy for sustainable development is an important part of national and international energy policies. Due to the variability of wind and solar power, energy storage systems allowing effective management of power generation are required. Nowadays there are several technologies that are considered for energy storage. The production of hydrogen by water electrolysis is now considered one of the most promising technologies. Ammonia is considered as a potential hydrogen carrier, while the NH3 electrosynthesis from N2 and H2O looks attractive currently limited by its low efficiency. Electrochemical CO2 reduction another attractive technology to production of liquid fuels. All these technologies require efficient and cheap electrocatalysts for successful industrial implementation. The emergence of new multifunctional materials continuously increases the expectations for the performance of energy conversion and storage devices. MXenes, a family of two-dimensional transition metal carbides has been discovered as candidate for these applications [1], [2]. MXene/metal composites are considered as promising electrocatalysts for several processes. Ni and Ni-based alloy (Ni-Cu) electrodes have been employed as non-precious metal catalysts for hydrogen production owing to their substantial catalytic activity in hydrogen evolution reaction (HER) in alkaline media. However, in economical water-alkali electrolysers, the sluggish water dissociation kinetics (Volmer step) in platinum-free electrocatalysts results in poor hydrogen-production activity. MXene/nano-metal composites as electrocatalysts for hydrogen evolution reaction (HER) in an alkaline medium, demonstrate lower overpotential compared to balk metal electrode at high current densities. An enhanced catalytic activity of MXene/nano-metal composite attributed to the acceleration of the Volmer stage in HER process in alkaline media, by enhancing the water adsorption and dissociation on the catalyst surface where water dissociation is a rate-limiting step. This work proposes a concept of composite structures composed of MAX phase/metal-Al alloy and MXene/metal as functional materials. The concept is based on the combination of the initial MAX phase with metal alloys (Ni, Cu), tuning MAX phase and metal-Al alloy ratio, carbon content and synthesis conditions, followed by Al etching.In more details this work explores the possibilities for the processing of Ni-Al/MAX phase or Cu-Al/MAX phase and corresponding Ni/MXene or Cu/MXene - containing composite electrodes for energy conversion and storage application. Synthesis of powder mixtures with extra Ni or Cu and Al content (e.g. Cu:Ti:Al:C = 1:2:4.5:2) resulted in products containing modified titanium-based MAX phase material and Ni-Al or Cu-Al alloys [2]. It was found that the presence of Cu and Al excess in the reaction mixture promotes the formation process of conventional MAX phases (Ti3AlC2) due to generating Al-rich metal-Al alloys with a lower melting point. Further etching of these sintered products (Ni-Al or Cu-Al/ MAX phase) in HF or alkaline solution allowed the direct formation of electrodes with active surface containing MXene and nanoporous metal (Cu, Ni) composites [2, 3] with a well-developed 3D porous MXene/metal structure possessing good mechanical integrity, electrical conductivity and catalytic activity in hydrogen evolution reaction [2, 3].

The production of hydrogen through electrochemical water splitting driven by clean energy becomes a sustainable route for utilization of hydrogen energy, while an efficient hydrogen evolution reaction (HER) electrocatalyst is required to achieve a high energy conversion efficiency. Nickel phosphides have been widely explored for electrocatalytic HER due to their unique electronic properties, efficient electrocatalytic performance, and a superior anti-corrosion feature. However, the HER activities of nickel phosphide electrocatalysts are still low for practical applications in electrolyzers, and further studies are necessary. Therefore, at the current stage, a specific comprehensive review is necessary to focus on the progresses of the nickel phosphide electrocatalysts. This review focuses on the developments of preparation approaches of nickel phosphides for HER, including a mechanism of HER, properties of nickel phosphides, and preparation and electrocatalytic HER performances of nickel phosphides. The progresses of the preparation and HER activities of the nickel phosphide electrocatalysts are mainly discussed by classification of the preparation method. The comparative surveys of their HER activities are made in terms of experimental metrics of overpotential at a certain current density and Tafel slope together with the preparation method. The remaining challenges and perspectives of the future development of nickel phosphide electrocatalysts for HER are also proposed.

The development of efficient electrocatalysts for hydrogen evolution reactions is an extremely important area for the development of green and clean energy. In this work, a precursor material was successfully prepared via electrodeposition of two doping elements to construct a co-doped cobalt hydroxide electrocatalyst (Ru-Co(OH)2-Se). This approach was demonstrated to be an effective way to improve the performance of the hydrogen evolution reaction (HER). The experimental results show that the material exhibited a smaller impedance value and a larger electrochemically active surface area. In the HER process, the overpotential was only 109 mV at a current density of 10 mA/cm2. In addition, the doping of selenium and ruthenium effectively prevented the corrosion of the catalysts, with the (Ru-Co(OH)2-Se) material showing no significant reduction in the catalytic performance after 50 h. This synergistic approach through elemental co-doping demonstrated good results in the HER process.

The electrocatalytic hydrogen evolution reaction (HER) is an efficient and economic pathway to generate clean hydrogen energy in a sustainable manner. To improve the HER activity of Earth-abundant catalysts, reducing the dimension of materials is an effective strategy, and in this context two-dimensional (2D) materials have received substantial research attention owing to their large surface area and 2D charge transport channels. However, the thermodynamically stable basal surface of 2D catalysts is usually inactive in catalysis, which significantly impedes further optimization of the 2D HER catalysts. In this Minireview, we highlight in detail that defect engineering in 2D catalysts could bring multiple benefits in improving the HER activity. From the point of view of kinetics, defect sites could serve as active sites for catalyzing the HER process directly, and the introduction of defect structures may result in the optimization of electronic structures of the catalysts, thereby facilitating the HER process. Besides, for catalytically inert substrate materials, the defect sites could act as anchoring sites for catalyst loading, thus realizing efficient HER performance with the aid of enhanced electric conductivity. We anticipated that this Minireview could provide useful guidance for designing advanced HER catalysts in the future.

Novel WS2/WO3 heterostructured nanosheets as efficient electrocatalyst for hydrogen evolution reaction