ABS control design based on wheel-slip peak localization

Longitudinal and lateral forces acting on tyres are known to be closely related to tractive ability, braking characteristics, handling stability and manoeuvrability of ground vehicles. However, it is not feasible in the operating vehicles to measure the tyre forces directly because of the high cost of sensors, the limitations in sensor technology, interference with tyre rotation and the harsh environment. Another approach is the indirect monitoring technique that can estimate the tyre forces based on remote sensor outputs and vehicle dynamics models. In this paper, in order to develop tyre force-monitoring systems, a monitoring model is proposed utilizing not only the yawing motion but also the roll motion. Based on the monitoring model, a monitoring system is designed to estimate the lateral tyre force acting on each tyre. The monitoring system is constructed on the basis of a new scaled Kalman filter with model error compensator (SKFMEC) technique that is developed in this study to improve the robustness performance of Kalman filter methods. The SKFMEC technique adopts both the well-conditioned observer and the model error compensator concepts. Tyre force estimation performance of the monitoring system is evaluated in the MATLAB simulations where true tyre force data are generated from a 14-degree-of-freedom vehicle model with the combined-slip ‘magic formula’ tyre model.

<div class="htmlview paragraph">Various vehicle dynamic simulation software programs have been developed for use in reconstructing accidents. Typically these are used to analyze and reconstruct preimpact and postimpact vehicle motion. These simulation programs range from proprietary programs to commercially available packages. While the basic theory behind these simulations is Newton's laws of motion, some component modeling techniques differ from one program to another. This is particularly true of the modeling of tire force mechanics. Since tire forces control the vehicle motion predicted by a simulation, the tire mechanics model is a critical feature in simulation use, performance and accuracy. This is particularly true for accident reconstruction applications where vehicle motions can occur over wide ranging kinematic wheel conditions. Therefore a thorough understanding of the nature of tire forces is a necessary aspect of the proper formulation and use of a vehicle dynamics program.</div> <div class="htmlview paragraph">This paper includes a discussion of tire force terminology, tire force mechanics, the measurement and modeling of tire force components and combined tire force models currently used in simulation software for the reconstruction of accidents. The paper discusses the difference between the idealized tire force ellipse and an actual tire friction ellipse. Equations are presented for five tire force models from three different simulation programs. Each model uses a different method for computing tire forces for combined braking and steering. Some experimentally measured light vehicle tire properties are examined.</div> <div class="htmlview paragraph">Some tire force models begin with a specified level of braking force and use the friction ellipse to determine the corresponding steering force; this produces steering forces and a resultant tire force equal in magnitude to full skidding for combined steering and braking. Comparisons are presented of results from simulation programs using different tire models for vehicle motions involving two types of severe yaw. The comparisons in this paper are not of reconstructions where the user seeks initial conditions to match an existing trajectory. The first comparison is a hypothetical postimpact motion with a given initial velocity and initial angular velocity and the other is a sudden steer maneuver. In some cases, the simulations and their tire models predict the vehicle motion closely. In most cases, however, the results differ significantly between simulation programs.</div> <div class="htmlview paragraph">The example simulations presented in this paper are not intended to reflect the way vehicle dynamic simulation programs are used typically in accident reconstruction.</div>

<div class="section abstract"><div class="htmlview paragraph">Tread depth, inflation pressure, tire temperature, and road surface condition are among the most notable factors that have a noticeable effect on the tire force and moment characteristics. They can vary significantly during the operation of a tire and can effectively modify tire (and thus vehicle) performance. This study presents details of an adaptive magic formula (MF) tire model capable of coping with changes to the tire operating condition. More specifically, extensions have been made to the magic formula expressions for tire cornering stiffness and peak grip level, to account for variations in the tire inflation pressure, load, tread-depth and temperature. As a next step, the benefits of using an adaptive tire model for vehicle control system applications is demonstrated through simulation studies for enhanced vehicle control systems using an adaptive tire model in comparison to traditional control systems based on a non-adaptive tire model with fixed model parameters. In particular, this paper investigates the improvements an adaptive tire model would bring into the following vehicle control system strategies: Electronic Stability Control (ESC) system, Brake Torque Vectoring (BTV) system, and Rear Wheel Steer (RWS) system.</div></div>

Compared with passenger cars, heavy vehicles have larger loads, longer bodies, more steering modes, and are more likely to cause improper steering angle relationships among the wheels, resulting in uncoordinated steering. This uncoordinated steering makes the tyres roll and drag, which results in abnormal lateral and longitudinal slips, changing the lateral and longitudinal mechanical characteristics of tyres and leading to low path tracking accuracy and poor steering performance of vehicles. Therefore, a tyre model containing lateral and longitudinal mechanical characteristics under heavy load is the key to solving the problem of uncoordinated steering in heavy vehicles. Firstly, with the physical tyre model, the lateral and longitudinal slip is described as carcass deflections. With the carcass deflections and contact pressure distribution of heavy load, the tyre forces under uncoordinated steering conditions are derived. Then, the tyre imprint parameters are obtained with a test bench, and a two-dimensional contact pressure distribution model is established to reproduce the contact pressure distribution of tyre under heavy loads and dynamic slips. The comparison results with Magic Formula (MF) and Trucksim are generally consistent, proving the effectiveness of the model. Finally, a lateral and longitudinal tyre force distribution control of vehicles is carried out based on the established model. The results of the Trucksim-Simulink co-simulation show that the path tracking accuracy of vehicles is significantly improved, which demonstrates that the tyre model incorporating lateral and longitudinal mechanical characteristics under heavy loads can provide a theoretical basis for solving the problem of uncoordinated steering in heavy vehicles.

In order to prevent severity traffic accident on freeway caused by tire blowout, it is necessary to monitor the tire pressure in real time. This paper established a linear model between the force and the slip to estimate the tire radius through least square ,where only ABS wheel speed sensors were used. The result of the simulation about this method is perfect ,it is a effective method for indirect tire pressure monitoring.

In this paper the systematic development of an integrated braking controller for a vehicle driven by an electric motor on the front axle is presented. The objective is to engage the electric motor only during braking, up to the point at which the vehicle reaches its manoeuvrability and stability limit. The control challenges are to distribute the braking effort correctly between the hydraulic brakes at the four tyres and the electric motor, to handle the tyre saturation and motor constraints effectively and to adapt the control allocation based on the vehicle’s states. The controller is designed using the state-dependent Riccati equation control technique, the vehicle state estimation and the ‘magic formula’ tyre model. The state-dependent Riccati equation control technique is a suboptimal control design technique for non-linear systems. A novel method for constructing the state-dependent coefficient formulation of the system dynamics is proposed. Soft constraints in the state dynamics are described, while an augmented penalty approach is suggested for handling the system’s hard constraints. The performance of the controller was evaluated for different braking scenarios using simulations in a MATLAB/Simulink environment. An eight-degree-of-freedom non-linear vehicle model was utilized. The numerical results show that the controller suboptimizes the regenerative braking effort while considering the tyre force saturation, the motor torque limits, the vehicle yaw rate and the slip angle error. A comparison with a constrained linear quadratic regulator shows the advantages of the proposed controller.

<p>The objective of this study is to integrate a continuum-based deformable tire and terrain interaction model into a general-use physics-based simulation environment capable of off-road vehicle mobility analysis and high-performance computing potential. Specifically, the physics-based deformable tire and terrain models which were recently proposed and validated by Yamashita, et al. will be implemented into the structure of the multi-physics simulation engine Chrono. In off-road vehicle mobility analysis, empirical and analytical models have been commonly used for vehicle-terrain interaction. While these models utilize experimental data or terramechanics theories to create quick predictive mobility models, they are unable to capture the highly nonlinear behavior of soft soil deformation, which can lead to inaccurate or unreliable results. In order to resolve these limitations, the use of physics-based numerical approaches have been proposed. These methods make use of finite element and discrete element simulations to describe the interaction between the vehicle and deformable terrain. Continuum-based finite element models transfer tire forces to the terrain and model the deformation with elasto-plastic constitutive models. Discrete element soil uses a large number of small rigid body particles to describe the microscale behavior of granular terrain, with the deformation of the soil represented by the motion and contact of the particles. While these physics-based models offer a more accurate vehicle-terrain interaction model, the solution procedure can become complex and computationally expensive since co-simulation techniques are often used.</p><p>To address these issues, the analysis of physics-based full vehicle dynamics simulations utilizing high-fidelity deformable tire and terrain models in a multi-physics engine with high-performance computing capability is desired. To this end, a continuum mechanics based shear deformable laminated composite shell element proposed by Yamashita, et al. was integrated into the flexible body dynamics simulation framework of Chrono. This element was based on the absolute nodal coordinate formulation and is defined by the global position coordinates and the transverse gradient coordinates of its four nodes. Element lockings are eliminated with the incorporation of the enhanced assumed strain (EAS) and assumed natural strain approaches (ANS). The element formulation includes an extension to model laminated composite materials. Additionally, a locking-free 9-node brick element was integrated into the Chrono framework that makes use of the curvature coordinates at the center of the element. This element is formulated with the Hencky strain measure such that multiplicative finite strain plasticity theory can be used to incorporate soil plasticity models, such as the capped Drucker-Prager failed criterion.</p><p>With the shear deformable laminated composite shell element and plastic soil brick element integrated into the Chrono multi-physics simulation engine, an off-road deformable tire and terrain interaction model was developed using the vehicle dynamics simulation module Chrono::Vehicle. An off-road deformable tire model was parameterized based on commercial tire properties and generated as an interchangeable tire model option in the full vehicle dynamics system. Benchmark verification tests were performed to ensure the accuracy of tire deformation and tire force characteristics. Further tests were performed to validate a deformable tire model with a deformable tread pattern constructed from shear deformable shell elements and co-rotational tetrahedral elements. The deformable soil model was also integrated as a terrain option in Chrono::Vehicle and numerical tests were carried out to demonstrate its interaction with rigid and deformable tire models. To make use of the computational performance enhancements available in Chrono, Open Multi-Processing (OpenMP) and Advanced Vector Extensions (AVX) were applied to the evaluation of the elastic force/Jacobian matrix and large matrix operations of flexible bodies, respectively, in order to reduce the computation time by nearly 60%.</p>

<div class="section abstract"><div class="htmlview paragraph">Accurate parameters of vehicle motion state are very important to the active safety of a vehicle. Currently the extended Kalman filter and unscented Kalman filter are widely used in estimation of the key state parameters, such as speed. In this situation, tire model must be used. The Magic Formula Tire Model is widely used in vehicle dynamics simulation because of its high versatility and accuracy. However, it requires a large number of parameters, which make the key state parameters of a real vehicle difficult to accurately obtain. Therefore, it is limited in real-time control of a vehicle. Firstly, the original Magic Formula Tire Model is simplified in this paper; then Jin Chi's Tire Model is introduced; thirdly, parameters of both the simplified Magic Formula and Jin Chi's Tire Model are identified using PSO (Particle Swarm Optimization) algorithm. Finally, Jin Chi's Tire Model is also used in parameters identification of experimental data.</div></div>

Recent research suggests the various applications of Model Predictive Control on vehicle systems. In numerous cases, nonlinear tire models such as the Magic Formula, which are highly complex and are more detailed than necessary, are used. This paper presents a nonlinear tire model that excludes the region of negative slope but expresses the nonlinear properties of tire well enough for tracking the lane of a racing course. The proposed inverse tire model can also be used to calculate the slip angle from the tire force. Thus, the model can be utilized to design the Model Predictive Controller.

This paper constitutes the second part of the publication series on introducing a new simplified combined-slip tire model for vehicle dynamics. The effectiveness of the proposed model (Elliptic Model) is validated using a comparative dynamic simulation. A five degree of freedom vehicle model is presented and used for simulation. Tire forces are calculated based on both the Elliptic Model and Magic Formula, and simulation results are compared. It has been shown that the simplified tire model shows promising performance and may be used for estimating the tire force capacity, specially up to the saturation point of tire slips.

This article presents a hierarchy control strategy for magneto-rheological suspension system integrated with active braking and active front steering subsystems. This is proposed for the improvement of ride comfort and vehicle stability under different kinds of driving conditions. A nonlinear complicated full vehicle model which includes the longitudinal, lateral and vertical motions is established and combined with a modified coupling ‘Magic Formula’ tyre model. Subsequently, the global state identification and task assignment logic are formulated by adopting several driving conditions such as the straight driving and cornering state. A fuzzy control strategy is then used for the suspension system, while a sliding mode control technique is utilised for both braking and steering systems. In order to demonstrate the effectiveness of the proposed control methodology, control performances such as roll angle, yaw rate and vehicle trajectory are evaluated and presented.

The TNO Delft-Tyre is a renowned model for the pneumatic tire in the automotive industry based upon the famous Magic Formula first introduced by Bakker et.al. in the late eighties [1]. The name Magic Formula seems to appear first at the 1 Delft colloquium on tires four years later [2]. The Magic Formulae themselves have evolved greatly during the last two decades with contributions from a wide variety of companies and researchers. The Magic Formula is widely used in the automotive (and gaming) industry because of its ease of use to represent the complicated tire characteristics. TNO has marketed the Magic Formula tire model as Delft-Tyre and implemented the dynamic forces and moments computation routines, including the extension of SWIFT [3], in a variety of multibody simulation packages, like ADAMS and DADS and general purpose simulation software Simulink ii . Modelon has in close cooperation with TNO by means of extensive benchmarks implemented the MF-Tyre/MF-Swift in Modelica. This paper presents the work conducted to implement the TNO tire models in Modelica which now is available as a commercial library in Dymola.

This paper describes a model for motorcycle tires based on a physical interpretation of experimental data. In this model the real shape of the tire carcass is accurately described and its deformability is taken into account. The actual position of the contact point, that is, the center of the contact patch, is calculated. The concept of instantaneous slip is defined by calculating the longitudinal slip and sideslip angles using the velocity of the actual contact point, which moves with respect to the rim. Tire forces and torques are applied on the actual contact point and calculated according to Pacejka’s magic formula. The coupling of sliding properties with elastic ones and the use of the instantaneous slip concept make it possible to properly describe both steady state and transient behavior using the same relations, thus avoiding the use of any auxiliary equations.

Estimation of Nonlinear Tire Forces and Road Friction for Modeling and Control

Advanced vehicle dynamics control systems, such as integrated chassis control systems, are generally designed in a two layers structure: a tire force determination layer, and a tire force generation layer. The tire force generation layer works as a servo function that follows the force commands from the force determination layer. Therefore, the tire force generation layer should not require a lot of computing resources. This paper presents an inverse tire model that calculates required slip ratios and slip angles when tire forces are commanded. The inverse tire model is based on a nonlinear tire model that is sufficiently complex and, thus, can capture the nonlinear characteristics of tires. Because mathematical inversion of the nonlinear tire model is challenging, recursive methods can be considered for an inverse model. However, recursive methods, such as Newton Raphson method, do not guarantee the fixed time span required for finishing the computation. This paper presents a method for inverse tire model that does not require recursive computations.