Adaptive Instantaneous Frequency Estimation of Multicomponent Signals Based on Linear Time–Frequency Transforms

Time-frequency (TF) analysis (TFA) to nonstationary signals can reveal the nonlinearly changing instantaneous frequencies (IFs) of signals; it is, therefore, widely used for rotating machinery fault diagnosis under time-varying speed conditions. However, the traditional TFA methods may only reveal the outline of IFs due to the extra TF diffusion caused by limited TF resolution, hindering the fault diagnosis of rotating machinery. To enhance the readability of the time-frequency representation (TFR) of the signals with IF trajectories linearly time-varying, linear chirplet transform has been proved effective. To effectively tackle the signal with nonlinearly changing IFs, a string of chirp-rates is preferred, where the final TFR is obtained by superposition of each corresponding sub-TFR at each TF point. However, the extra cross-term interferences resulted from a string of chirp-rates cannot be neglected on TFRs. Aiming at alleviating the cross-terms from the TFR, matching and reassignment based TF enhancement strategy is proposed, where only the appropriate chirp-rate and its corresponding TFR slice is retained at each time instant. The appropriate chirp-rate is adaptively selected by the index—spectral kurtosis. To further increase the readability of the resulting TFR, a reassignment technique synchrosqueezing transform is integrated with the proposed matching strategy. By iteratively employing reassignments, TFR with the enhanced energy and sharp IF ridges can be generated. The effectiveness of the proposed method is validated by both simulated and experimental analyses. It is shown that the proposed method is effective in processing time-varying signals and can provide more accurate IF estimation, which paves the way for rotating machinery fault diagnosis under nonstationary speed conditions.

Instantaneous frequency (IF) estimation of multi-component signals with closely spaced and intersecting signal components of varying amplitudes is a challenging task. This paper presents a novel iterative time–frequency (TF) filtering approach to address this problem. The proposed algorithm first adopts a high-resolution time–frequency distribution to resolve close components in the TF domain. Then, IF of the strongest signal component is estimated by a new peak detection and tracking algorithm that takes into account both the amplitude and the direction of peaks in the TF domain. The estimated IF is used to remove the strongest component from the mixture, and this process is repeated till the IFs of all signal components are estimated. Experimental results show the superiority of the proposed method as compared to other state-of-the-art methods.

The Wigner distribution (WD) produces highly concentrated time-frequency (TF) representation of nonstationary signals. It may be used as an efficient signal analysis tool, including the cases of frequency modulated signals corrupted with the Gaussian noise. In some applications, a significant amount of impulse noise is present. Then, the WD fails to produce satisfactory results. The robust periodogram has been introduced for spectral estimation of this kind of noisy signals. It can produce good concentration for pure harmonic signals. However, it is not so efficient in the cases of signals with rapidly varying frequency. This is the motivation for introducing the robust WD. It is a reliable TF representation tool for wide class of nonstationary signals corrupted with impulse noise. This distribution produces good accuracy of the instantaneous frequency (IF) estimation. Using the Huber (1981) loss function, a generalization of the WD is presented. It includes both the standard and the robust WD as special cases. This distribution can be used for TF analysis of signals corrupted with a mixture of impulse and Gaussian noise. The presented theory is illustrated on examples, including applications on the IF estimation and time-varying filtering of signals corrupted with a mixture of the Gaussian and impulse noise. The case study analysis of the IF estimators' accuracy, based on the standard and the robust WD forms, is performed. In order to improve the IF estimation, a median filter is applied on the obtained IF estimate.

Traditional signal postprocessing methods suffer from the repeated assignment problem (RAP), which can result in inaccurate instantaneous frequency (IF) estimation and signal recovery. In this article, to solve this problem, a novel time-frequency (TF) analysis (TFA) method called the synchro-reassigning transform (SRT) is proposed. This method aims to obtain the ideal TF representation (TFR) by utilizing derivatives of the constructed amplitude function and a three-step selection rule to adaptively extract the TF coefficients on the IF trajectories in the TF plane, and reassigning these TF coefficients into a new TFR. In this way, SRT can eliminate the RAP, thus obtaining an approximately ideal TFR that helps to realize more accurate IF estimation and signal reconstruction. Furthermore, SRT shows satisfactory performance on signals with high nonlinear IFs or relatively close IFs, even under strong noise conditions. Two simulated signal and three real-life signals were used to demonstrate the performance of SRT.

This paper explores three groups of time–frequency distributions: the Cohen’s, affine, and reassigned classes of time–frequency representations (TFRs). This study provides detailed insight into the theory behind the selected TFRs belonging to these classes. Extensive numerical simulations were performed with examples that illustrate the behavior of the analyzed TFR classes in the joint time–frequency domain. The methods were applied both on synthetic and real-life non-stationary signals. The obtained results were assessed with respect to time–frequency concentration (measured by the Rényi entropy), instantaneous frequency (IF) estimation accuracy, cross-term presence in the TFRs, and the computational cost of the TFRs. This study gives valuable insight into the advantages and limitations of the analyzed TFRs and assists in selecting the proper distribution when analyzing given non-stationary signals in the time–frequency domain.

Time–frequency analysis and instantaneous frequency estimation using two-sided linear prediction

A robust parameter estimation of FHSS signals using time–frequency analysis in a non-cooperative environment

Instantaneous frequency estimation for wheelset bearings weak fault signals using second-order synchrosqueezing S-transform with optimally weighted sliding window

Slope synchronous chirplet transform and its application to tacho-less order tracking of rotating machineries

In this paper, we propose a novel method for the detection of road accidents by analyzing audio streams for road surveillance application. In the last decade, due to the increase in a number of people and transportation vehicles, traffic accidents have become one of a major public issue worldwide. The vast number of injuries and death due to road traffic accident reveals the story of a global crisis of road safety. A total of 52,160 road traffic accidents (RTA), 1130 injuries and 85 fatalities were registered during the year 2000, in the state of Qatar. An increase in the number of transportation vehicles around cities has risen the need for more security and safety in public environments. The most obvious reason for a person's death during accidents is the absence or prolong response time of the first aid facility, which is due to the delay in the information of the accident being reached to the police, hospital or ambulance team. In the last couple of years, several surveillance systems have been proposed based on image and video processing for automatically detecting road accidents and car crashes to ensure a quick response by emergency teams. However, in some situations such as adverse weather conditions or cluttered environments, the visual information is not sufficient enough, whereas analyzing the audio tracks can significantly improve the overall reliability of surveillance systems. In this paper we propose a novel method that automatically identifies hazardous situations such as tire skidding and car crashes in presence of background noises, by analyzing the audio streams. Previous studies show that methods for the detection, estimation, and classification of nonstationary signals can be enhanced by utilizing the time-frequency (TF) characteristics of such signals. The TF-based techniques have been proved to outperform classical techniques based on either time or frequency domains, in analyzing real-life nonstationary signals. Time-frequency distributions (TFDs) give additional information about signals that cannot be extracted from either the time domain or frequency domain representations, i.e. the instantaneous frequency of the components of a signal. In order to utilize this extra information provided by TF domain representation, the proposed approach extracts TF image features from quadratic time-frequency distributions (QTFDs), for the detection of audio anomalies. The extended modified-B distribution (EMBD) is utilized to transform a 1-dimensional audio signal into 2-dimensional TF representation which is interpreted as an image. The image descriptors based features are then extracted from the TF representation to classify visually the audio signals into background or abnormal activity patterns in the TF domain. The proposed features are based on Haralick's texture features extracted from the TF representation of audio signals considered and processed as a textured image. These features are used to characterize and hence classify audio signals into M classes. This research study demonstrates that a TF image pattern recognition approach offers significant advantages over standard signal classification methods that utilize either t-domain only or f-domain only features. The proposed method has been experimentally validated on a large open source database of sounds, including several kinds of background noise. The events to be recognized are superimposed on different background sounds of roads and traffic jam. The obtained results are compared with a recent study, utilizing the same large and complex data set of audio signals, and the same experimental setup. The overall classification results confirm the superior performance of the proposed approach with accuracy improvement up to 6%.

Self-paced learning for instantaneous frequencies estimation in heavy noise environments

Chirplet transform (CT) is effective in characterization of instantaneous frequency (IF) for monocomponent linear-frequency-modulated signal. However, the CT is not suitable to analyze multicomponent signal with nonlinear-frequency-modulated component. In this paper, a time-frequency fusion technique based on polynomial CT (PCT) (TFPCT) is proposed to characterize the time-frequency structure of such signals. The TFPCT relies on the fact that the PCT is able to concentrate the energy closely along the IF of the monocomponent signal in time-frequency distribution (TFD). For multicomponent signal, the TFPCT first estimates the proper coefficients with respect to individual component and, second, produces a series of the TFD using the PCT. Each TFD has better energy concentration along the IF of one component. Then, in order to reduce the interference of unwanted component and preserve the component of interest, each TFD is filtered and grouped as an image. At last, the TFPCT combines these TFDs to be an eventual fused TFD, which has the energy concentrating closely along the IF of all components. Comparison with several conventional TFD methods on both numerical multicomponent signal and bat echolocation signal validates the potential and the effectiveness of the proposed method.

Chapter 10 - Instantaneous Frequency Estimation and Localization

Synchrosqueezing transform (SST) benefits from an instantaneous frequency (IF) estimator in the time-frequency domain, providing an energy-concentrated time-frequency representation to describe the time-varying frequency of seismic signals. To enhance the concentration performance of SST, this paper theoretically proposes a statistical SST (SSST) by constructing a spectrum-weighted IF estimator in the short-time Fourier transform (STFT) domain. In this SSST, a linear chirp signal is introduced to better capture its chirp rate, and then the quadratic STFT spectra are weighted by a window-related weighting function. On this basis, two equations related to the IF and chirp rate are constructed to derive the spectrum-weighted IF estimator. Finally, the STFT coefficients are squeezed to the estimated IF trajectories by a frequency fixed-point iterative algorithm, thereby providing a more concentrated time-frequency representation for multi-component signals than existing advanced methods, while enabling to retrieve each component. Two synthetic examples and one field seismic data on thin interbeds are utilized to demonstrate the effectiveness of the proposed SSST and show its ability to highlight the time-varying frequency features of seismic signals, which is a promising seismic data analysis tool, such as characterizing thin interbed thickness variations.

Generalized demodulation with tunable E-Factor for rolling bearing diagnosis under time-varying rotational speed