Adaptive predictive error filter‐based maximum power point tracking algorithm for a photovoltaic system

Photovoltaic (PV) systems are increasingly used as a sustainable energy source, but their efficiency is significantly affected by environmental factors such as shading and temperature variations. This study proposes a novel Maximum Power Point Tracking (MPPT) algorithm based on the fusion of Support Vector Regression (SVR) and Incremental Conductance (INC) techniques, designed to enhance the performance of PV systems under partial shading conditions. The SVR model is employed to predict the power output of the PV system based on voltage and current measurements, leveraging its capability to handle non-linear relationships with high accuracy. The INC method is then integrated with the SVR predictions to dynamically adjust the operating point of the PV array, ensuring rapid and precise tracking of the maximum power point (MPP). The algorithm was implemented in MATLAB, and comprehensive simulations were conducted to evaluate its performance. Simulation results demonstrate that the SVR-INC fusion algorithm significantly improves the accuracy and stability of MPPT under varying shading conditions. The algorithm effectively reduces the tracking time to the MPP and minimizes power losses caused by partial shading. Compared to traditional MPPT methods, the proposed algorithm shows enhanced robustness and faster convergence, making it highly suitable for practical applications in real-world PV systems. Furthermore, the integration of SVR with INC provides a robust framework for dealing with the complexities of $P V$ power generation. The algorithm’s ability to adapt to changing environmental conditions ensures that the PV system operates at its maximum efficiency. The study also discusses the optimization of SVR parameters and the importance of datadriven approaches in enhancing MPPT performance. In conclusion, the proposed SVR-INC fusion MPPT algorithm offers a promising solution for improving the efficiency and reliability of PV systems under partial shading. The findings highlight the potential of this approach for future advancements in PV technology, contributing to the development of more efficient and resilient solar energy systems..

Due to the Randomness and fluctuation of the photovoltaic (PV) system, Maximum Power Point Tracking (MPPT) algorithm is employed to ensure the maximum power extraction from PV arrays, when it is connected to the grid. The previous studies have indicated that the MPPT algorithm is one of the main causes of interharmonics emission in PV systems. The MPPT algorithm parameters such as perturbation step size inevitably have a strong impact on the interharmonics in the current injected to the grid. In general, a smaller MPPT perturbation step size will reduce the interharmonics emission level, but it will result in poor tracking performance of the MPPT algorithm. Thus, there is a trade-off between the MPPT efficiency and the interharmonics emission in PV system. In this paper, an interharmonics suppression scheme with variable step size MPPT algorithm was proposed. In the suppression scheme, two voltage values near by the MPPT voltage and two tracking step size are preset. When the dc-link voltage of PV is between the two preset voltage values, it means that the PV power near its MPP and the smaller perturbation step size implemented in the MPPT algorithm. Otherwise, the bigger perturbation step size is employed. It can greatly reduce interharmonics emission level and maintain the MPPT efficiency. Simulations have been carried out to verify the effectiveness of the suppression scheme.

A hybrid maximum power point tracking for partially shaded photovoltaic systems in the tropics

Purpose Silicon photovoltaics technology has drawbacks of high cost and power conversion efficiency. In order to extract the maximum output power of the module, maximum power point (MPP) is used by implying the nonlinear behavior of I-V characteristics. Different techniques are used regarding maximum power point tracking (MPPT). The paper aims to review the techniques of MPPT used in PV systems and review the comparison between Perturb and Observe (P&O) method and incremental conductance (IC) method that are used to track the maximum power and gives a comparative review of all those techniques. Design/methodology/approach A study of MPPT techniques for photovoltaic (PV) systems is presented. Matlab Simulink is used to find the MPP using P&O simulation along with IC simulation at a steady temperature and irradiance. Findings MATLAB simulations are used to implement the P&O method and IC method, which includes a PV cell connected to an MPPT-controlled boost converter. The simulation results demonstrate the accuracy of the PV model as well as the functional value of the algorithms, which has improved tracking efficiency and dynamic characteristics. P&O solution gave 94% performance when configured. P&O controller has a better time response process. As compared to the P&O method of tracking, the incremental conductance response rate was significantly slower. Originality/value In PV systems, MPPT techniques are used to optimize the PV array output power by continuously tracking the MPP under a variety of operating conditions, including cell temperature and irradiation level.

Currently, Photovoltaic (PV) energy is the most important energy resource in electrical power applications around the world since it is inexhaustible, clean and pollution free. As the output power from the PV arrays changing with solar irradiance and temperature, so it is necessary to operate the photovoltaic (PV) system at the maximum power point (MPP) to increase the power extraction from the solar panel. For this effective operation and maximum power extraction from a PV system, Maximum power point tracking (MPPT) algorithm plays a vital role by operating the PV energy system near the MPP. In this work, amongst several existing well established MPPT algorithms, the open voltage (OV) based algorithm is chosen for simulation of a PV system using Matlab / Simscape. As maximum power point (MPP) can be attained with a certain amount of load from the PV power system, so load matching is an important concept of MPPT algorithms. Here, the performances of this open voltage (OV) based algorithm method is evaluated for different values of solar radiation and battery was used as load to see the charging performance for the algorithm.

This paper presents an enhanced Maximum Power Point Tracking (MPPT) of Photovoltaic (PV) systems by means of Model Predictive Control (MPC) techniques. The PV array can feed power to the load through a DC/DC converter boosting the output voltage. Due to stochastic behavior of solar energy, MPPT control technique of PV arrays is required to operate at maximum power point. Extracting the maximum power from PV systems has been widely investigated within the literature. The main contribution of this paper is enhancement of the Incremental Conductance (INC) method through a fixed step predictive control under measured fast solar radiation variation. The proposed predictive control to achieve Maximum Power Point (MPP) speeds up the control loop since it predicts error before the switching signal is applied to the selected high gain multilevel DC-DC converter. Comparing the developed technique to the conventional INC method shows significant improvement in PV system performance. Experimental validation is presented using the dSpace CP 1103 to implement the proposed MPC-MPPT.

The escalating demands and increasing awareness for the environment, resulted in deployment of Photovoltaic (PV) system as a viable option. PV system are widely installed for numerous applications. However, the challenges in tracking the maximum power with intermittent atmospheric condition and varying load is significant. Maximum Power Point Tracking (MPPT) algorithms are employed and based on their convergence speed, control of external variations and oscillation, the output power efficiency, and other significant factors viz. the algorithm complexity and implementation cost, novel MPPT approach are preferable than the conventional approach. This paper presents an artificial intelligence-based optimization controller for MPPT in a PV system under varying load and irradiance conditions. Comparative analysis of Artificial Neural Network (ANN) and Particle Swarm Optimization (PSO) based MPPT is simulated and analysed. The PV system consisting of PV array and boost converter with MPPT controller feeds the DC load. The power conversion and panel efficiency are the significant factors to determine the effectiveness of tracking maximum power point. The simulation results show the performance of these controllers on the PV panel output power and the load side output power under changing loads and irradiance. In addition, the comparison of PV panel efficiency of ANN and PSO based MPPT techniques w.r.t changing loads is carried out. Based on the above analysis, PSO based MPPT algorithm marginally outperforms the ANN based MPPT algorithm. Further, the implementation of hybrid MPPT (ANN &PSO) for higher accuracy and tracking capability can be carried out as future work.

Solar photovoltaic (PV) system contributes a significant role in meeting power requirements and helps the decentralization of power generation and distribution. The output of the individual photovoltaic module depends on local temperature and irradiance. Since the variation of these parameters depends on the environmental factors, it is difficult to obtain maximum power in all instances. The maximum power point tracking (MPPT) technique is used for tracking the maximum power available at a particular instant. This paper presents the maximum power extraction from a photovoltaic system using Artificial Intelligence (AI) techniques. AI based methods provide a fast dynamic response with high accuracy and mitigate the effects of partial shading. A comparative study is performed for various AI based MPPT techniques such as Fuzzy, Artificial Neural Network (ANN), and Adaptive Neuro Fuzzy Inference System (ANFIS). PV module output is interfaced with the resistive load through the Z-Source inverter (ZSI). The ZSI boost the input voltage and provides an AC output voltage. The AI based MPPT techniques have been investigated with conventional Z-source Inverter (ZSI) and Switched Inductor Z-Source inverter (SL-ZSI). A simple boost control technique is employed to control, both conventional and SL Z-source inverter. The performance of the system is verified using MATLAB Simulink.

As a sustainable energy source, the use of solar photovoltaic (PV) systems has significantly increased. Environmental elements, especially partial shadowing circumstances, have a considerable impact on how well solar PV systems function. In such cases, the various local maxima in the power-voltage curve make it difficult for conventional Maximum Power Point Tracking (MPPT) methods to maintain peak efficiency. Heuristic Maximum Power Point Tracking (MPPT) system for solar photovoltaic (PV) applications, employing the cuckoo search algorithm. The primary objective of the research is to enhance the efficiency and reliability of solar PV systems by optimizing the MPPT process, which is crucial for maximizing energy extraction under varying environmental conditions. The model is used to simulate the performance of the system under various environmental conditions, such as changes in temperature and irradiance levels. The simulation results are then statistically analyzed to evaluate the effectiveness of the cuckoo search algorithm in tracking the maximum power point accurately and rapidly. The algorithm demonstrates a robust ability to converge to the maximum power point efficiently, thereby enhancing the overall energy yield of the solar PV system.. The performance of the hybrid PSO-CSA MPPT algorithm in contrast to traditional MPPT techniques is assessed through simulations and tests under various shading circumstances. The findings show that the hybrid strategy regularly outperforms conventional methods by enhancing the total energy production of partially shadowed solar PV installations through faster convergence, less oscillations, and greater tracking accuracy. The proposed hybrid algorithm also demonstrates stability and flexibility in real-world settings, making it a potential option for boosting the dependability and efficiency of solar PV systems when shade is present. This study advances the field of renewable energy and prepares the path for the use of sophisticated optimization methods to the problems of solar PV power generation under changing environmental circumstances.

Dynamic global maximum power point tracking of the PV systems under variant partial shading using hybrid GWO-FLC

Today, Photovoltaic (PV) systems are very popular for power generation because they enjoy the advantage of being pollution free abundant natural resource, low maintenance cost and noiseless operation. Photovoltaic (PV) systems needs maximum power point tracking (MPPT) to maximize the PV array power output which is independent of the temperature, irradiation coPIC18F452nditions and electrical characteristics of the load. The Research Work introduces photovoltaic MPPT system based on PIC18F452 to achieve maximum power tracking. Moreover, the combination of boost circuit and PIC18F452 microcontroller is used for tracking of the maximum power generation from PV system. Moreover, Research presents a practical implementation of Perturbation and Observation (P&O), Incremental Conductance (IncCon) and Fuzzy Logic algorithms to achieve MPPT control. These algorithms are widely used because of its low-cost and ease of realization. Proposed P&O, Incremental Conductance and Fuzzy Logic algorithms are implemented and tested under different loads, and the test results are analyzed and compared. The results show the performance of the Fuzzy Logic and Incremental Conductance algorithm in tracking MPP is better than the P&O algorithm and the experimental results of Fuzzy Logic and Incremental Conductance algorithm indicate the feasibility and improved system functionality with high-efficiency. Also, results concludes that the design can effectively accomplish the purpose of the maximum power tracking.

Partial shading conditions (PSCs) can significantly reduce the output energy produced by photovoltaic (PV) systems. Moreover, when such conditions occur, conventional and advanced maximum power point tracking (MPPT) systems fail to operate the PV system at its peak because the bypassing diodes may cause the PV system to become trapped at a low power point when they are in conduction mode. The PV system can be operated at the global maximum power point (MPP) with the help of global peak searching tools. However, the frequent use of these tools will reduce the output of PV systems since they force the PV system to operate outside its power region while scanning the I-V curve in order to determine the global MPP. Thus, the global peak searching tools should be deployed only when a PSC occurs. In this paper, a simple and accurate method is proposed for detecting PSCs by means of monitoring the sign of voltage changes (positive or negative). The method predicts a PSC if the sign of successive voltage changes is the same for a certain number of successive changes. The proposed method was tested on two types of PV array configurations (series and series–parallel) with several shading patterns emulated on-site. The proposed method correctly and timely identified all emulated shading patterns. It can be used to trigger the global MPP searching techniques for improving the PV system’s output under PSCs; furthermore, it can be used to notify the PV system’s operator of the occurrence of PSCs.

In this paper, a solar photovoltaic (PV) array powered scalar control of the induction motor (IM) drive for the water pumping application is presented. This control scheme involves the standalone operation of the IM drives. Solar PV array has nonlinear I- V characteristics, it requires additional control technique for Maximum Power Point (MPP) tracking. The efficiency is improved with the help MPP tracking (MPPT) technique which extracts maximum power available to the PV array. Perturb and observe (P&O) control technique offers simple control, ease of implementation and low cost is utilized along with DC/DC converter. This Stage extracts maximum power available from the PV array and fed power to the next stage of the DC/AC converter. The switching of DC/AC converter is generated with the help of open-loop V/F control of IM. The performance of the system is examined with the help of MATLAB/Simulink and corresponding results are present to support the suitability of the control scheme.

In order to use photovoltaic cell effectively and improve its photoelectric conversion efficiency, the maximum power point of photovoltaic generation system should be tracked rapidly and stably. In this paper after comparison and analysis common methods used in controller of photovoltaic systems such as Fuzzy and P&O, proposed an approach combined from FLC and particle swarm optimization algorithm (PSO) as an appropriate method to achieve maximum power point tracking (MPPT). Indeed Fuzzy logic control can cope with photovoltaic system using heuristic knowledge rules, but tuning the control parameters is not straightforward. PSO performs an on-line haphazard global search for input and output scaling factors of a PD-type fuzzy controller. The objective function of the PSO algorithm has been defined to minimize slope of P-V curve. The simulation results in SIMULINK of MATLAB indicate that proposed method can effectively eliminate the power oscillation around MPP and raise stability and reach steady state of the system.

To mitigate problems like energy shortage and environmental degradation caused by conventional energy sources, it needs to shift from conventional energy to non-conventional energy sources. The solar photovoltaic (PV) technology emerges as one of the leading non-conventional energy sources. To operate a PV system at its maximum efficiency, it requires the operating module at maximum power output point (MPP). There are many conventional as well as advanced maximum power point tracking (MPPT) techniques developed and implemented for a solar PV system. This work provides a comparative analysis of the conventional and fuzzy logic controller (FLC)-based MPPT techniques for a solar PV system. In this study, performance of two conventional techniques is considered, i.e., perturb and observe (P & O) and incremental conductance (IC) MPPT technique. The analysis of the PV system is performed for different solar irradiance levels. The comparative study is evaluated for complexity, tracking time, efficiency, range of power, voltage, and current oscillations. The DC-DC boost converter is used for operation of the proposed PV system at MPP. The implementation of the entire system and control algorithms has been modeled in MATLAB Simulink.