Adaptive probability-based broadcast forwarding in energy-saving sensor networks

Wireless sensor networks congestion occurs easily due to its centralized traffic pattern. Normally, mono-sync wireless sensor network experiences multiple traffic flow congestion in the dense environment of the network, which leads to excess energy consumption and severe packet loss. To overcome these issues, a congestion detection and alleviation mechanism using cluster based heuristic optimized hierarchical routing protocol is proposed in this paper. Here, congestion detection and alleviation utilize the features of sensor nodes. The congestion is categorized into two types: (i) node level congestion and (ii) link level congestion. The node level congestion is detected by assessing the buffer utilization and the interval amid the consecutive data packets. The link level congestion is considered with computing link usage utilizing back-off step of round robin carrier sense multi-access with collision avoidance. Congestion detection and alleviation reactively affected node/link through cuckoo hosted rider search multi-hop routing algorithm. It has two phases: the cluster head selection and multi-path routing. Cluster head selection is performed through Taylor multiple random forest kernel fuzzy C-means clustering algorithm and multi-path routing is performed through cuckoo hosted rider search multi-hop routing algorithm. The simulation of the proposed method is done in network simulator tool. Here, the performance metrics, like packet delivery ratio, delay, energy consumption, packet drop, overhead, network lifetime and throughput are calculated. The experimental outcomes of the proposed technique shows 11.6%, 18.4% and 28.1% lower delay, 78.2%, 65.4% and 52.6% higher packet delivery ratio, and 29.2%, 37.4% and 40.8% lower packet drop compared with the existing methods, like congestion detection and alleviation using multi-attribute decision-making in optimization-based hybrid congestion alleviation routing protocol in wireless sensor networks, congestion detection and alleviation using hybrid K-means with greedy best first search algorithms in packet rate reduction utilizing adaptive weight firefly algorithm ant colony optimization based routing protocol in wireless sensor networks and congestion detection and alleviation using multi-input time on task optimization algorithm for altered gravitational search algorithm routing protocol in wireless sensor networks.

QoSNET: An integrated QoS network for routing protocols in large scale wireless sensor networks

Wireless sensor networks are a new emerging area where swarm intelligence can be applied with interesting implications. In fact, a strong analogy between unicellular organism colonies and wireless sensor networks can be emphasized: a sensor network can be viewed as a “colony” of simple, scarce resource nodes that, autonomously, are able only to perform simple tasks, but all together can accomplish very complex problems. In this paper we propose a routing protocol for multisink Wireless Sensor Networks with interesting properties: self organization, fault tolerance and environmental adaptation. The proposed protocol was inspired by the well known behavior (in artificial life studies) of “Slime Mold”. Such colony of unicellular organisms organizes itself in clusters by pheromone generation and evaporation mechanisms. In a similar manner our protocol manages the data traffic towards multiple sink nodes using the gradient concept and reaching high levels of autonomy and fault tolerance. We analyze the proposed protocol to examine the performances, the signalling overhead and the adaptation properties to environmental changes or nodes faults using simulation techniques.

Wireless Sensor Networks (WSNs) play a necessary position in todays actual world applications. WSNs are a team of autonomous sensor nodes that are geographically distributed to accumulate information and monitor events. WSNs are similarly sense that they rely on wireless connectivity and spontaneous formation of networks so that sensor information can be transported via wireless. Sometimes called dust network, minute sensors as small as dust referring to smart dust. WSNs are spatially distributed two to screen or bodily temperature, sound, pressure, etc. and to cooperatively ignore their data via the network to different locations. Each such sensor network node has typically various parts. Routing in WSNs in one of the important technique, because all node executes its battery power, if may be one node failure it collapse entire networks. Routing in WSNs is in reality difficult due to the intrinsic characteristics that differentiate these networks from different networks. The plan of routing protocols in WSN is affected via number of exigent factors. In this paper, a review on routing protocols for Wireless Sensor Networks (WSNs) and performance of its execution.

Wireless sensor networks are a promising application of the Internet of Things in the sustainable development of smart cities, and have been afforded significant attention since first being proposed. Authentication protocols aim to protect the security and confidentiality of legitimate users when accessing and transmitting data. However, existing protocols may suffer from one or more security flaws. Recently, Butt et al. proposed an energy-efficient three-factor authentication protocol for wireless sensor networks. However, their protocol is vulnerable to several attacks, and lacks certain security properties. In this paper, the causes of these design flaws are analyzed. Furthermore, we propose a novel three-factor authentication protocol (password, smart card, and biometric information) for wireless sensor networks in Internet of Things contexts. A dynamic anonymous strategy is designed to prevent privacy disclosure and to resist sensor node capture attacks, tracking attacks, and desynchronization attacks. The Find–Guess model and random oracle model are combined to prove the security of the proposed protocol. A comparative analysis with related schemes shows that the proposed protocol has higher security and is able to maintain a low computational overhead.

Wireless sensor networks(WSN) are a kind of communication networks with in-dependent sensor nodes which could construct multi-hop ad hoc network to trans-fer data. The transport protocols for Wireless Sensor Network play an important role to promote the performance of the whole systems. This paper proposes a modified transport layer protocol for heterogeneous Wireless Sensor Networks(HWSN). As TCP is not suitable to use in HWSN directly, we design a modified transport protocol(named mTCP) based on TCP by a six-state finite state machine. Experimental results illustrate that our design can improve the communication capability of the transmission layer in heterogeneous wireless sensor networks significantly.

The existing routing protocols for wireless sensor networks were not reasonable in design, which limited their application. Most of the existing studies did not take into account the energy consumption of the network and the balanced use of the energy of sensor nodes, which led to the unsatisfactory application effect of wireless sensor networks in some fields. Therefore, from the perspective of energy balance in wireless sensor networks, this paper proposed a construction method of an energy balance routing protocol in wireless sensor networks based on a fuzzy control strategy. Firstly, based on the analysis of the basic composition of wireless sensor networks and the structure of sensor nodes, this paper expounded the basic process of wireless data transmission and summarized the classification and characteristics of routing protocols in wireless sensor networks from different angles. Secondly, according to the node data transmission characteristics of wireless sensor networks, the energy balance use model of sensor nodes was established, and the design method of the energy balance routing protocol based on fuzzy control strategy was proposed, and the data transmission link was optimized. Finally, through experimental comparative analysis, the results showed that the energy balanced routing protocol proposed in this paper can effectively realize the energy balanced use of the network data transmission process. Compared with other common routing protocols, the wireless sensor network routing protocol proposed in this paper can not only improve the data transmission efficiency and reduce the data redundancy but also save energy consumption and prolong the network running time. The design method of routing protocol proposed in this paper will be conducive to the optimization and application of routing protocol in wireless sensor networks and provide a theoretical basis for the related research of wireless sensor networks.

Due to miniaturization of hardware and availability of low-cost, low-power sensors, Wireless Sensor Network and Multimedia Sensor Network applications are increasing day by day. Each application has a specific quality of service and experience requirements. The design of routing and MAC protocol which can fulfill the requirements of the application is challenging given the constrained nature of these devices. Considerable efforts are directed towards the design of energy efficient QoS-aware routing protocols. In this article, we present state of the art review of routing protocols for Wireless Multimedia Sensor Networks while addressing the challenges and providing insight into research issues.

In wireless sensor networks, MAC protocol is used to achieve efficient, fair and balanced allocation of wireless channel resources and access control of nodes in the network, and to control the communication process of nodes in the network. The energy consumption of wireless sensor nodes is mainly concentrated in the communication unit, including: data transceiver, idle listening, protocol control overhead, etc. A good MAC protocol is beneficial to reduce unnecessary energy consumption and enhance node life time. At the same time, MAC protocol, as the bottom protocol of wireless sensor network, provides a stable and reliable communication foundation for the realization of the upper protocol. Therefore, a large number of scholars at home and abroad have carried out extensive and in-depth research on MAC layer protocol of network. In this paper, the research process and progress of MAC layer protocol in wireless sensor networks are analyzed, and the research progress of MAC layer protocol in multi-radio frequency and multi-channel wireless sensor networks is analyzed.

In monitoring wireless sensor networks (WSNs) with event-driven applications, the generated traffic usually has bursty characteristics when an event occurs. Transient congestion in the networks would increase delay and packet loss rate severely, reducing the network performance greatly. Through the analysis on delay and packet loss rate in congestion, this paper proposes a congestion-aware mac protocol (C-MAC) for wireless sensor networks. In C-MAC, backoff delay of the nodes around contention area is adopted as a congestion indication. In normal state, the CSMA/CA is working well at sensor nodes. And when the congestion occurs, localized TDMA replaces the CSMA/CA in the congestion nodes. With the above mechanism, the congestion nodes only deliver their data during its assigned slots to control the contention overhead. Finally, we implement the C-MAC in our sensor network testbed. The experiment results show that the proposed MAC protocol could effectively operate on the congestion caused by burst information, and reduce both the delay and packet loss rate significantly.

Wireless Sensor Network has emerged as an important technology of the future due to its potential for application across a wide array of domains. The collaborative power of numerous autonomousremote sensing nodes self configured into a multi hop network permits in-depth accurate observation of any physical phenomenon. A stringent set of computational and resource constraints make the design and implementation of sensor networks an arduous task. The issue of optimizing the limited and often non-renewable energy of sensor nodes due to its direct impact on network lifetime dominates every aspect of wireless sensor networks. Existing techniques for optimizing energy consumption are based on exploiting node redundancy, adaptive radio transmission power and topology control. Topology control protocols significantly impact network lifetime, routing algorithms and connectivity. We classify sensor nodes as strong and weak nodes based on their residual energy and propose a novel topology control protocol (NEC) which extends network lifetime while guarantying minimum connectivity. Extensive simulations in Network-Simulator (ns-2) show that our protocol outperforms the existing protocols in terms of various performance metrics. We further explore the effectiveness of data aggregation paradigm as a solution to the dominant problem of maximizing energy utilization and increasing network bandwidth utilization in sensor networks. We propose a novel energy efficient data aggregation protocol based on the well-known k-Means algorithm. Our protocol achieves energy efficiency by reduced number of data transmissions at each level of a hierarchical sensor network. Our protocol exploits the spatial and temporal coherence between the data sensed by neighboring sensor nodes in a cluster to reduce the number of packet transmissions. Sensor nodes apply k-Means algorithm to the raw data to generate a reduced set of mean values and forward this modified data set to cluster-head nodes. We further prove the effectiveness of our protocol in providing increased energy conservation in the network by extensive simulation results.

Wireless sensor networks, a distributed network of sensor nodes perform critical tasks in many application areas such as target tracking in military applications, detection of catastrophic events, environment monitoring, health applications etc. The routing protocols developed for these distributed sensor networks need to be energy efficient and scalable. To create a better understanding of the performance of various routing protocols proposed it is very important to perform a detailed analysis of them. Network simulators enable us to study the performance and behavior of these protocols on various network topologies. Many Sensor Network frameworks were developed to explore both the networking issues and the distributed computing aspects of wireless sensor networks. The current work of simulation study of routing protocols is done on SensorSimulator, a discrete event simulation framework developed at Sensor Networks Research Laboratory, LSU and on a popular event driven network simulator ns2 developed at UC Berkeley. SensorSimulator is a discrete event simulation framework for sensor networks built over OMNeT++ (Objective Modular Network Test-bed in C++). This framework allows the user to debug and test software for distributed sensor networks. SensorSimulator allows developers and researchers in the area of Sensor Networks to investigate topological, phenomenological, networking, robustness and scaling issues, to explore arbitrary algorithms for distributed sensors, and to defeat those algorithms through simulated failure. The framework has modules for all the layers of a Sensor Network Protocol stack. This thesis is focused on the simulation and performance evaluation of various routing protocols on SensorSimulator and ns2. The performance of the simulator is validated with a comparative study of Directed Diffusion Routing Protocol on both ns2 and SensorSimulator. Then the simulations are done to evaluate the performance of Optimized Broadcast Protocols for Sensor Networks, Efficient Coordination Protocol for Wireless Sensor Networks on SensorSimulator. Also a performance study of Random Asynchronous Wakeup protocol for Sensor Networks is done on ns2.

Wireless industrial sensor networks are wireless sensor networks which have been adapted to industrial applications. Most techniques for wireless sensor networks can be applied to wireless industrial sensor networks. However, for industrial applications of wireless industrial sensor networks, new requirements such as real-time, reliable delivery need to be considered. In this paper, we propose EARQ, which is a novel routing protocol for wireless industrial sensor networks. It provides real-time, reliable delivery of a packet, while considering energy awareness. In EARQ, a node estimates the energy cost, delay and reliability of a path to the sink node, based only on information from neighboring nodes. Then, it calculates the probability of selecting a path, using the estimates. When packet forwarding is required, it randomly selects the next node. A path with lower energy cost is likely to be selected, because the probability is inversely proportional to the energy cost to the sink node. To achieve real-time delivery, only paths that may deliver a packet in time are selected. To achieve reliability, it may send a redundant packet via an alternate path, but only if it is a source of a packet. Experimental results show that EARQ is suitable for industrial applications, due to its capability for energy efficient, real-time, reliable communications.

Problem statement: The security in Wireless Sensor Networks (WSN) is a critical issue due to the inherent limitations of computational capacity, storage capacity and power usage. Key management only makes sure the communicating nodes possess the necessary keys, at the same time protecting the confidentiality, integrity and authenticity of the communicated data. Approach: Proposed a RSA-CRT methodology for authenticated broadcast in the wireless sensor networks and analyzed the proposed with existing methodologies indicating their advantages, drawbacks and weaknesses. Results: The proposed RSA with CRT algorithm is improved the secured routing paradigm and provides efficient key management which using optimal encryption/decryption of broadcast messages authentication. Conclusion: The proposed system countermeasures the attacks in the network layer of WSN and it will reduce the communication overhead, storage space and energy consumption of nodes.

The selection of routing protocols is playing a major role in the device and proper utilization of wireless sensor networks (WSNs) that can help to provide better interconnection networks. On preserving the role of key performance, metric related to routing protocols is also an important and challenging task in the WSNs. Therefore, the sensor nodes life can be improved in efficient manner by using routing protocols that preserve the energy consumption and quality of service (QoS). Three different kinds of categories are used in the design of routing protocols which are data centric, hierarchical, and location-based approaches. Energy consumption can be improved by reducing the effect of redundancy level and transferring the passive motes sleep mode. The data transmission time also impacts on the energy conservation and QoS in WSNs. The surveillance and monitoring-related applications are the demanding research field in the WSNs that has to resolve the issue QoS routing in the manner of reliable data delivery. Energy consumption and QoS constraints are two complementary factors in the routing protocol, but the time delay factor can be involved in such a manner to satisfy both the performance metrics in routing protocol in WSNs.