Adaptive Rate Control in Smart Grid Heterogeneous Communications Networks

Traditionally, jamming to the wireless in-home system is a fatal threat for Smart Grid communications, which impedes the two-way data transmission between electric devices and the smart meter, and thus deteriorates the reliability of the in-home communication of Smart Grid. To enhance Home Area Network (HAN) security for Smart Grid application, in this paper, orthogonal frequency division multiplexing (OFDM)-based power line (PL) system is incorporated into HAN, and a hybrid model of PL and wireless communications are proposed with transmit diversity. For the combinational model with transmit diversity, Alamouti code is employed at the transmitter part. Simulation results validate the feasibility of the presented combinational solution, and furthermore show that the hybrid model could tolerate jamming to the wireless system effectively.

Unpredictable characteristics of power line communication (PLC) channels seriously affect the performance of the communication systems. Among these unpredictable characteristics, noise is considered to be the main source of errors in data transmission in PLC systems. Unlike conventional communication systems in which noise is usually modeled as additive white Gaussian noise (AWGN), its definition in PLC channels has a more complicated form. In order to design reliable PLC systems, it is essential to understand the features of noise in power line networks. Since the impulsive noise generated by electrical house appliances is one of the most significant noise types in PLC channel, it is very important to analyze these electrical devices with respect to their noise characteristics. In this paper, impulsive noise characteristics of various house appliances are analyzed over the frequency range of 30kHz-50MHz.

Exponential demand for broadband applications has elicited renewed interest in characterizing noise in power line communication (PLC) networks for optimal error performance analysis. PLC is economical and ubiquitous, however due to multipath phenomena and nonstationary impulsive noise, the PLC channel is very harsh to signal transmission. Recent studies reveal that PLC noise is cyclostationary and modelling its characteristic should exploit the spectral and temporal redundancy. In addition, preliminary research shows that PLC noise exhibits self-similarity and can be predicted by fractal theory. In modelling noise employing fractal theory, the Hausdorff dimension (D) needs to be approximated. D is related to Hurst parameter (H), which is a measure of self-similarity. Hence, it is important to estimate H for accurate noise prediction using fractal theory. H parameter estimators assume stationarity in time series data. Therefore, preprocessing is required for the case of PLC noise before estimating H to make it stationary as periodicity and nonstatioanrity affects the H estimators. In this study, we remove the periodicity hidden in the PLC noise obtained from measurement campaign within several university offices, workshops and laboratories. Then long-range dependence is estimated from this pre-processed noise data by employing three estimation algorithms: R/S (rescaled adjusted range) method, aggregated variance method and absolute values of aggregated series method. Results from the said estimation methods though not the same, show that the Hurst parameters obtained from various noise measurements are greater than 0.5, implying presence of self-similarity with long-term memory. Results from this study will find valuable applications in PLC noise modelling using fractal and chaos theory and in error performance analysis in both narrowband and broadband PLC systems.

Power Line Communications have been the subject of an important research work. At the same time, the growing demand for multimedia communications provides a good prospect for PLC as a promising transmission technique for the “last mile” access network. Orthogonal Frequency Division Multiplexing (OFDM) is a spectrally efficient multicarrier modulation technique for high speed data transmission over multipath fading channels. High Peak-to-Average Power Ratio (PAPR) is a major drawback of OFDM. The high PAR of the OFDM signal has to be considered when setting the range of the digital-to-analog converter (DAC) and dimensioning the line-driver. This paper introduced an improved PAPR reduction scheme using constant envelope modulation. Furthermore, by utilizing continuous phase modulation (CPM) in a CE-OFDM system, the PAPR can be effectively reduced to 0 dB. The paper describes a CE-OFDM based modem for Power Line Communications (PLC) over the low voltage distribution network. Relying on a preliminary characterization of a PLC network, a complete description of the modem is given.

Based on the techno-economic pedagogical (TEP) method proposed in [1] that is suitable for designing Broadband over Power Lines (BPL) networks in transmission and distribution power grids, this paper examines the broadband potential of overhead low-voltage/broadband over power lines (LV/BPL) and medium-voltage/broadband over power lines (MV/BPL) networks. In this paper, on the basis of the set of linear simplifications and techno-economic metrics already presented in [1], TEP method demonstrates to undergraduate electrical and computer engineering (ECE) students the behavior of overhead LV/BPL and MV/BPL networks in terms of their modal transmission characteristics when different overhead LV/BPL and MV/BPL topologies occur. The contribution of this paper is four-fold. First, the factors influencing modal transmission characteristics of overhead LV/BPL and MV/BPL networks are investigated with regard to their spectral behavior and end-to-end channel attenuation. Second, the impact of the multiplicity of branches at the same junction is first examined. In the light of cascaded two-way power dividers, TEP method is extended so as to cope with more complex BPL topologies offering a new simplified and accurate circuital approximation. Third, apart from the broadband transmission characteristics of the entire overhead distribution power grid, a consequence of the application of TEP method is that it helps towards the intraoperability/interoperability of overhead LV/BPL and MV/BPL systems under a common PHY framework in the concept of a unified distribution smart grid (SG) power network. Fourth, TEP method can be demonstrated to undergraduate ECE students as case study in order to stimulate their interest for Microwave Engineering and Circuit/System Engineering courses. Citation: Lazaropoulos, A. (2015). Designing Broadband over Power Lines Networks Using the Techno-Economic Pedagogical (TEP) Method – Part II: Overhead Low-Voltage and Medium-Voltage Channels and Their Modal Transmission Characteristics. Trends In Renewable Energy, 1 (2), 59-86. doi: 10.17737/tre.2015.1.2.006

Power line communication (PLC) uses the highly developed infrastructure of the electrical energy distribution network for data transmission. Measurements are showing that a broadband use of PLC channels is possible. So, PLC is of interest to future broadband communication systems. Such systems will be heterogeneous in several respects, for example relative to the used transmission channel but also relative to the complexity of the participant nodes. Wittneben and Kuhn (see block VTC 2002 - Spring) presented a new class of space-time block codes for radio channels. These codes meet the requirements of future communication systems. They are highly flexible and can be adapted to the particular requests of the transmission. In this paper a PLC application of these codes is investigated. They are used as a basis for a scalable and efficient PLC channel coding scheme. This shows that this class of codes can be used as a generic coding scheme for heterogeneous networks. Alternatively, the PLC application can be considered as an example of the usage of the codes on a frequency selective channel with coloured noise. The applied linear block code optimally uses the diversity of the frequency selective channels in combination with OFDM. This leads to significant gains in performance in case of very frequency selective channels; for barely frequency selective channels or for an AWGN channel the performance is slightly better or not affected respectively. These performance results are presented for measured PLC channels.

Communication is the transfer of information from one point to another over a channel. However, as technology is growing, more information is needed to be passed over large distances for the realization of the world being a global village. There is the need to place a reliable communication system that will transmit effortlessly both data and voice over a channel. Power Line Communication (PLC) also known as Broadband over Power Line (BPL) technology offers high speed and broadband communication services to homes connected to the power lines. This makes use of the electrical lines for transmission of data up to the last mile and there is no need of separating copper cables, short haul satellite systems, optical fibre cable and Wi-Fi. This work presented an overview of a voice and data communication over PLC in terms of the various types, equipment use, method of communication, application, regulatory activities on PLC and the challenges facing the implementation of power line for transmitting voice and data. Therefore, PLC is a viable alternative to all other methods of transmission as it is readily available and can be easily implemented in rural areas where other communication systems are not implemented for the transmission of voice and data communication. Keywords: Communication, Power Line Communication, Broadband over Power Line, Voice and Data Communication, Broadband over Power Line, Transmission, Electrical Line. DOI : 10.7176/MTM/9-8-03 Publication date : August 31st 2019

This keynote discusses the behavior of noise in indoor power line communications (PLC) channels. Some ideas to improve system performance based on the knowledge of PLC noise are also introduced. The power-line noise at an outlet is the sum of noise waveforms produced and emitted to the lines from the appliances connected to the power-line network. In the design and the analysis of wireless communication systems, stationary additive white Gaussian noise (AWGN) is often assumed. In PLC systems, however, the statistical behavior of the man-made noise is quite different from that of the stationary AWGN. The fact that the noise in power-lines is not AWGN is often believed to be a cause of low quality of communications. However, Gaussian is the distribution of the largest entropy, and communications under non-Gaussian noise may achieve better performance if the system is designed to adapt the noise statistics. In other words, PLC systems retain large potential for performance improvement if the behavior of the noise is clarified and taken into account in the system design. For narrow-band indoor PLC, we have a mathematically tractable and accurate model based on experimental measurements. In this model, the noise is expressed as a Gaussian process whose instantaneous variance is a periodic time function. With this assumption and representation, the cyclostationary features of power-line noise can be described in close form formula with a small set of parameters. In wide-band indoor PLC, we have made measurements with high speed sampling (50MHz) with long observation duration (10.4s).

Advanced communication technologies has allowed the power-line communication (PLC) channel to be a transmission medium that enables the transferring of high-speed digital data over the classical indoor electrical wires. The development of PLC systems for Internet, voice, and data services requires measurement-based models of the transfer characteristics of the power-line network suitable for performance analysis by simulation. In this paper, a statistical-based and deterministic PLC channel frequency model was proposed. This model has the advantage of using only one parameter: the channel class. Related software is also developed. In this paper, this model is further improved to represent the measured impulse responses, and related software is developed. First, a PLC channel classification is realized, and an average magnitude and phase channel model by class is proposed. Second, the multipath behaviour of the PLC channel is introduced: a statistical-based channel magnitude generator is built, and a refined phase model is suggested. Finally, the related software is briefly described.

Direct sequence code division multiple access (DS-CDMA) and M-ary frequency shift keying (MFSK) are two viable modulation schemes for broadband power line communication (PLC) channels, for multi-carrier and single carrier cases respectively. In this paper, we study the bit error rate (BER) performance of a synchronous DS-CDMA system and an MFSK system employing coherent detection for a PLC channel. The background noise present in PLC channel is assumed to follow Nakagami-m distribution as suggested by earlier works. Thereafter a comparison is drawn between the two modulation schemes. In order to draw the comparison at an equal level, we analyse the BER performances of the two systems having the same degree of transmitter/ receiver complexity along with the criteria of same bandwidth occupation, same transmission power as well as the same PLC channel characteristics. The study provides an insight as to how a small change in the parameter of a random variable (RV) describing the background power line noise has a marked influence on the BER performances of the two modulation schemes mentioned above. Also from the simulation results obtained it is quite evident that for a single user case, the MFSK system outperforms the DS-CDMA system at similar data rates.

Power line communications networks (PLCNs) facilitate efficient power management, data access, and monitoring services over a home area network by using a network implementation taking advantage of the built-in power cable infrastructure. A control station with which attached user stations communicate over the power line is used to coordinate the communications process. As serious distortion and losses are incurred by signals that are transmitted across the power line, it is highly desirable to employ relay stations to support the transmission of such data flows. Yet, to date, only limited research results are available for the cross-layer synthesis and management of such a relay-aided power line communications system. In this paper, we develop and study a relay backbone synthesis algorithm (RBSA) that is used to configure the PLC network topology, allowing active source stations to efficiently transport their message flows to the control station. We also present a relay backbone synthesis algorithm under fixed-topology (RBSAF) that enables the system management mechanism to jointly activate selective relay stations and schedule their sharing of the PLC medium, when considering nonadjustable PLC network topologies. Our new computationally efficient RBSA and RBSAF schemes are proven numerically to achieve throughput rates close to the optimal solution.

AMI (Advanced Metering Infrastructure) is reflected in two-way metering, two-way interoperability on an advanced measurement system. The access network of AMI connecting power utilities to customer's home area network (HAN) promotes the smart metering automation. In such a power line carrier communications medium, the use of OFDM modulation technique is well with the power line carrier communication channel, to effectively resist the power line channel noise, attenuation and time- varying characteristics of the impact. This paper introduces the concept of power line communication, the basic features and principles of the Orthogonal Frequency Division Multiplexing technology (OFDM), focused on analysis of the advantages of OFDM technology used in power line communications.

<div class="htmlview paragraph">This paper reviews the characteristics of a power line network as data communication medium and studies the challenges encountered when communicating over power wiring. This technology review has been done as part of feasibility study for using aircraft power-lines for data communication.</div> <div class="htmlview paragraph">Power-Line Communication is a term which describes the use of existing electrical lines to provide the medium for a high speed communications network. Power Line Communications is achieved by superimposing the voice or data signals onto the line carrier signal using an appropriate communication technology. Power Line Communications represent a potential simplicity for communications among different devices, because it does not need additional wires for connecting devices network together.</div> <div class="htmlview paragraph">Power line cables have been used as a communication medium for many years. However, because power line cables are not designed for communication, they pose major challenges for a modem designer. Frequency selectivity and time variation of the channel frequency response, high level of noise, and regulatory issues are some of the main considerations. The impedance, transmission line loss and noise level of power line fluctuate greatly according to how the devices are connected and their operating conditions. The paper reviews these sources of attenuation, noise and distortion encountered when communicating over power wiring. The power-line communication channel, in general, is modeled as having a time varying frequency-dependent signal-to-noise ratio over the communication bandwidth.</div> <div class="htmlview paragraph">The paper further discusses the required features for aircraft data networks and presents aircraft power lines channel characteristics. The aircraft power-line was initially designed to distribute power in an efficient way, hence it is not adapted for communication and advanced communication methods are needed. Baseband techniques are not acceptable for Power Line Communications over aircraft power networks because of high powers transferred in baseband. This means some kind of passband technique has to be used. There exist a few types of digital modulations acceptable for this type of application. These can be split into narrowband and broadband. Narrowband mostly uses single carrier modulations like Frequency Shift Keying or Phase Shift Keying. Broadband modulations can be selected from Direct Sequence Spread Spectrum or Orthogonal Frequency Division Multiplex. The paper assesses these technologies in light of the known channel conditions and discusses realization of reliable high-speed communication over aircraft power-lines.</div>

Power Lines Communication (PLC) deals with the transmission of data through the use of power lines. It is one emerging infrastructure for the home area network of Smart Grid (SG). There are two types of additive noise significantly affects the performance of PLC systems, namely background noise and impulsive noise. And the noise effects of both background noise and impulsive noise are taken from Bernoulli-Gaussian Process. The log-normal distribution has been used to model the PLC channel. As power lines are not designed for data communication. Because of signal attenuation and Electromagnetic Compatibility (EMC) regulations, the PLC link has low coverage and capacity To mitigate the EMC issue, the concept of Cognitive Radio (C.R.) is used in PLC. In this paper, receiver diversity scheme namely L-channel Selection Combining (SC) and Maximal Ratio Combining (MRC) is used for improving the Signal to Noise Ratio (SNR) to improve overall the reliability system. The system performance is evaluated in terms of Outage Probability for SC and MRC.

Although Power Line Communication (PLC) is not a new technology, its use to support data transmission over low voltage (LV) distribution networks is still the focus of ongoing research. This thesis focuses on the channel modelling and performance evaluation of narrowband (NB) PLC system. First, the channel modelling approaches of PLC are studied. Then, the proposed PLC channel modelling method based on the bottom-up approach for LV narrowband PLC in a frequency band between 9 kHz and 490 kHz is presented. This proposed model employs the transmission and scattering matrix methods to calculate the transfer function of a typical LV PLC network which comprises two common cable types (copper cables and aluminium conductor steel reinforced). Unlike the top-down approaches, this model is scalable as the network complexity increases and can better describe the network behaviour as a function of physical parameters.In addition, the noise characteristics and popular noise reduction techniques of PLC are studied. The major impairment to the PLC is the impulsive noise which is mainly generated by the switching transient in the network. Hence, a new technique is proposed to mitigate the impact of impulsive noise on data transmission over power lines. This proposed technique is an optimal Clipping/Blanking nonlinearity technique which is based on the minimum bit error rate (BER) search. Results obtained from the simulation of this technique demonstrate that performance has been enhanced in the NB-PLC system. The performance of the narrowband PLC system is also evaluated in both physical (PHY) and medium access control (MAC) layers. Since Orthogonal Frequency Division Multiplexing (OFDM) is a suitable modulation scheme for hostile environment of the power line, it is used to evaluate the PHY layer performance. As a result of the PHY layer performance analyses, it is found that the BER performance between neighbouring points in the typical LV PLC network is reasonable, but communication beyond one hop have to rely on upper layer protocols. In the MAC layer performance evaluation of the PLC system, the widely known random access MAC protocol that uses the Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) will be utilised. The MAC performance evaluation of the PLC system demonstrates a significant packet loss in LV PLC network even with a light traffic condition due to the noisy channel. Furthermore, the goodput declines abruptly once the individual transmission rate is high enough to block the network. In addition, the simulation results show that the channel errors can be reduced by adjusting the MAC parameters to allow the re-transmissions mechanisms to recoup the lost packets.