Adaptive Sliding Mode Control Using Simple Adaptive Control for SISO Nonlinear Systems

This paper presents a method of continuous-time simple adaptive control (SAC) using multiple neural networks for a single-input single-output (SISO) nonlinear systems with unknown parameters and dynamics, bounded-input bounded- output, and bounded nonlinearities. The control input is given by the sum of the output of the simple adaptive controller and the sum of the outputs of the parallel small-scale neural networks. The parallel small-scale neural networks are used to compensate the nonlinearity of plant dynamics that is not taken into consideration in the usual SAC. The role of the parallel small- scale neural networks is to construct a linearized model by minimizing the output error caused by nonlinearities in the control systems. Finally, the stability analysis of the proposed method is carried out, and the effectiveness of this method is confirmed through computer simulations.

Variable structure control with sliding mode, which is commonly known as sliding mode control (SMC), is a nonlinear control strategy that is well known for its robust characteristics (Utkin, 1977). The main feature of SMC is that it can switch the control law very fast to drive the system states from any initial state onto a user-specified sliding surface, and to maintain the states on the surface for all subsequent time (Utkin, 1977), (Phuah et al., 2005 a). The conventional SMC has two disadvantages (Ertugrul & Kaynak, 2000), (Slotine & Sastry, 1983), which are the chattering phenomenon (Slotine & Sastry, 1983), (Young et al., 1999) and the difficulty in calculating the equivalent control law of SMC that requires a thorough knowledge of the parameters and dynamics of the nominal controlled plant (Ertugrul & Kaynak, 2000), (Slotine & Sastry, 1983), (Hussain & Ho, 2004). Many methods of SMC using neural networks (NN) have been proposed (Phuah et al., 2005 a), (Ertugrul & Kaynak, 2000), (Hussain & Ho, 2004), (Phuah et al., 2005 b), (Yasser et al., 2007), (Topalov et al., 2007). In this paper, sliding mode controls using NN are proposed to deal with the problem of eliminating the chattering effect and the difficulty in calculating the equivalent control law of SMC that requires a thorough knowledge of the parameters and dynamics of the nominal controlled plant. The first method of this method applies a method using a simplified form of the distance function proposed in (Phuah et al., 2005 a), (Phuah et al., 2005 b). Furthermore, the simplified distance function of our method uses a sliding surface in the space of the output error and its derivations, as proposed in (Yasser et al., 2006 a), (Yasser et al., 2006 c), instead of the space of the states error to construct a corrective control input. Thus, no observer is required in the proposed method. Moreover, we also propose the application of an NN to construct the equivalent control input of SMC. The weights of the NN are adjusted using a backpropagation algorithm as in (Yasser et al., 2006 b). Hence, a thorough knowledge of the parameters and dynamics of the nominal controlled plant is not required for calculating the equivalent control law. Finally, a stability analysis is carried out, and the effectiveness of this first control method is confirmed through computer simulations. This first method has been previously discussed in (Yasser et al., 2007). The second method of this paper applies an NN to produce the gain of the corrective control of SMC. Furthermore, the output of the switching function the corrective control of SMC is applied for the learning and training of the NN. There is no equivalent control of SMC is used in this second method. As in the first method, this second method applies a method using a sliding surface in the space of the output error and its derivations, as proposed in

This paper introduces a sliding mode controller based on neural networks, for a class of single-input single-output (SISO) nonlinear discrete-time systems with unknown dynamics. The system is supposed to be represented by an input-output model implemented with layered neural networks. It is proposed a design procedure which is extended to tracking problems. It is also shown the application of this procedure to one simulated example and compared with the result from a classical controller.

In this chapter an adaptive sliding mode controller for the Furuta pendulum is proposed. The Furuta pendulum is a class of underactuated mechanical systems commonly used in many control systems laboratories due to its complex stabilization which allows the analysis and design of different nonlinear and multivariable controllers that are useful in some fields such as aerospace and robotics. Sliding mode control has been extensively used in the control of mechanical systems as an alternative to other nonlinear control strategies such as backstepping, passivity based control etc. The design and implementation of an adaptive sliding mode controller for this kind of system is explained in this chapter, along with other sliding mode controller variations such as second order sliding mode (SOSMC) and PD plus sliding mode control (PD \(+\) SMC) in order to compare their performance under different system conditions. These control techniques are developed using the Lyapunov stability theorem and the variable structure design procedure to obtain asymptotically stable system trajectories. In this chapter the adaptive sliding mode consist of a sliding mode control law with an adaptive gain that makes the controller more flexible and reliable than other sliding mode control (SMC) algorithms and nonlinear control strategies. The adaptive sliding mode control (ASMC) of the Furuta pendulum, and the other SMC strategies shown in this chapter, are derived according to the Furuta’s pendulum dynamic equations making the sliding variables, position errors and velocity errors reach the zero value in a specified reaching time. The main reason of deriving two well known sliding mode control strategy apart from the proposed control strategy of this chapter (adaptive sliding mode control) is for comparison purposes and to evince the advantages and disadvantages of adaptive sliding mode control over other sliding mode control strategies for the stabilization of the Furuta pendulum. A chattering analysis of the three SMC variations is done, to examine the response of the system, and to test the performance of the ASMC in comparison with the other control strategies explained in this chapter.

In this paper, the problem of designing a tracking controller for uncertain nonlinear second-order SISO (single input single output) systems which can suppress the effects of both the model uncertainty and noisy measurements is considered. Based on the framework of linear systems with nonlinear uncertainties whose norm-bounds are known we construct not only a sliding mode controller but a sliding observer for uncertain nonlinear second-order SISO systems, and we show the robust stability of the closed-loop control system. >

A novel auto-tuning PID control mechanism for nonlinear systems

This study develops the application of adaptive sliding mode control to earthquake-excited uncertain structures. Adaptive sliding mode control is useful as it only requires the boundness feature of uncertainties and disturbances to determine control gain (and not the amplitude of bounds). Moreover, the amplitude of chattering effect, the main drawback of sliding mode control, attenuates while stability and robustness are preserved. For this purpose, two adaptive-gain control algorithms are considered. In addition, a time-varying boundary layer is considered to increase the accuracy. In order to examine the feasibility of the applied method, a three-story benchmark structure is considered. Furthermore, performance indexes are used to evaluate the effectiveness of adaptive sliding mode control in comparison to sliding mode control and fuzzy sliding mode control. Comparison of the simulation results in accordance to performance indexes demonstrates that adaptive sliding mode control not only attenuates the amplitude of control effort (i.e. chattering amplitude) but also makes the control of the maximum response of the structure applying adaptive sliding mode control more convenient. It is shown that displacement and drift performance indexes of adaptive sliding mode control are equal to or less than ones of sliding mode control, while root mean square of the control effort of adaptive sliding mode control is attenuated around 50%.

An effective method, adaptive fuzzy sliding-mode (SM) PI Control to design full-bridge inverter is proposed in this paper. For practical applications, sliding mode control (SMC) with chattering phenomenon is a large hindrance. The modified model of the PI controller is built by the plant extension scheme, in order to relieve the chattering. Also, the fuzzy logic is applied to find the appropriate parameter values of the PI controller, and can adapt to plant parameter variations and external load disturbances. The proposed method has been realized for the actual full-bridge inverters controlled by DSP and CPLD. Simulation and experimental results of the closed-loop system show that the proposed method yields system performance improvement, such as low total harmonic distortion (THD), fast dynamic response, reduced steady-state error, and reduced chattering.

We propose a novel data‐driven model‐free adaptive terminal sliding mode control (SMC) for a class of discrete nonlinear systems with perturbations in which tracking error constraints are taken into account in improving tracking accuracy. The goal of this design is that the tracking error trajectory is maintained within the prescribed convergence region which is defined by the performance function, while the disturbances exist. In explaining the advantage of this proposed control scheme, at first, by theoretical calculation, it is proved theoretically that the quasi‐sliding mode can be achieved in a limited time under the specified tracking performance. Furthermore, comparative investigation results are given to validate the effectiveness of the proposed control scheme. Simulation results show that the proposed strategy is superior to model‐free adaptive control, model‐free adaptive terminal SMC, and data‐driven adaptive SMC with prescribed performance control algorithms in terms of tracking accuracy and response speed, which demonstrates the efficiency of the proposed scheme.

This paper develops a Fuzzy Adaptive Backstepping Control (FABC) and a Fuzzy Adaptive Backstepping Sliding Mode Control (FABSMC) for Single-Input Single-Output (SISO) nonlinear-systems with unmeasured states. The proposed adaptive schemes are fully compared. Thus, the Fuzzy Type-2 (FT2) concept and the High-Order Integral-Chain Differentiator (HOICD) are used as two universal approximators. Indeed, the first one is employed to approximate the nonlinear system model’s and the second one to estimate the unknown states. Special attention is paid for the used approximators robustness under unmodeled dynamics, parameter variations and process noise. It should be noted that the asymptotic stability of both the fuzzy adaptive controls and the observer convergence for each scheme have been proved. In addition, the employed schemes have been simulated on a two-tank coupled nonlinear system. Thus, from simulation results, we can prove that the proposed methods guarantee that all signals for closed loop systems are both regular and bounded. Specifically, it can be shown that the performances of the proposed Fuzzy Interval Type-2 (FIT2) schemes are significantly improved compared with Fuzzy Type-1 (FT1) schemes in presence of external disturbances.

In this paper, a magnetorheological (MR) mount with fuzzy sliding mode controller (FSMC) is studied for vibration suppression when the system is subject to base excitations. In recent years, magnetorheological fluids are becoming a popular material in the field of the semi-active control. However, the dynamic equation of an MR mount is highly nonlinear and it is difficult to identify. FSMC provides a simple method to achieve vibration attenuation of the nonlinear system with uncertain disturbances. This method is capable of handling the chattering problem of sliding mode control effectively and the fuzzy control rules are obtained by using the Lyapunov stability theory. The numerical simulations using one-dimension and two-dimension FSMC show effectiveness of the proposed controller for vibration suppression. Further, the well-known skyhook control scheme and an adaptive sliding mode controller are also included in the simulation for comparison with the proposed FSMC..

In this paper, we propose a Takagi-Sugeno-Kang (TSK) fuzzy model for a four-Mecanum-wheel omni-directional mobile free-base (4MW-ODMFB) with system uncertainties and external disturbances based on the model given in [12], [13], and then design an adaptive sliding-mode control (ASMC) system for trajectory tracking of 4MW-ODMFB, which combines the techniques of adaptive control and sliding-mode control. By using Lyapunov method we prove that the ASMC system is global asymptotic stable. We also conduct simulation experiments in MATLAB environment to test our TSK fuzzy model and the ASMC method. All the simulation results demonstrate the effectiveness of the proposed TSK fuzzy model and the stability and robustness of ASMC system.

This paper is concerned with an adaptive Sliding Mode Control (SMC) for non-linear discrete-time systems with mismatched uncertainty. The proposed adaptive SMC is composed of the equivalent and the switching controls, and it is constructed on the basis of the information from the proposed estimator to take the estimates for the state and uncertainty. It is assumed that some of the state variables can be measured and the uncertainty in the discrete-time systems is parameterised linearly in the unknown constant terms. The estimates for the state and the uncertainty are taken by applying the proposed weighted least squares method. It is verified based on the Lyapunov scheme according to which the estimation errors converge to zero as time increases, and the trajectory of the system response is stable as the sliding surface is suitably selected. The effectiveness of the proposed adaptive SMC is illustrated by the simulation experiment in a simple numerical example.

Adaptive sliding mode control with moving surface: Experimental validation for electropneumatic system

This paper develops a novel equivalent input disturbance (EID)-based adaptive sliding mode control (SMC) method for singularly perturbed systems (SPSs). Firstly, the block diagonalization approach is introduced to decompose the full-order SPSs exactly, and slow and fast subsystems are obtained by solving the upper and lower triangular matrices individually. Secondly, an EID is constructed to estimate the unknown disturbances with the observer gain and error system convergence analyzed. Then, depending on the decoupled reduced-order system models, a Lyapunov equation-based solution is adopted to construct a composite sliding surface. Finally, combined with the EID estimation, an adaptive SMC law is proposed to compensate the adverse effect of disturbances and the reachability condition is proven. The presented control strategy is free of any priori disturbances information while the satisfactory system performance can be guaranteed. Simulation results on two examples illustrate its superiority over the existing methods.