Advanced Large DNA Manipulation Technologies for Constructing Microbial Cell Factories.

Progress and perspective on development of non-model industrial bacteria as chassis cells for biochemical production in the synthetic biology era

5-Aminolevulinic acid (5-ALA) plays a pivotal role in the biosynthesis of heme and chlorophyll and has garnered great attention for its agricultural applications. This study explores the multifaceted construction of 5-ALA microbial cell factories. Evolutionary analysis-guided screening identified a novel 5-ALA synthase from Sphingobium amiense as the best synthase. An sRNA library facilitated global gene screening that demonstrated that trpC and ilvA repression enhanced 5-ALA production by 74.3% and 102%, respectively. Subsequently, efflux of 5-ALA by the transporter Gdx increased 5-ALA biosynthesis by 25.7%. To mitigate oxidative toxicity, DNA-binding proteins from starved cells were employed, enhancing cell density and 5-ALA titer by 21.1 and 4.1%, respectively. Combining these strategies resulted in an Escherichia coli strain that produced 5-ALA to 1.51 g·L-1 in shake flask experiments and 6.19 g·L-1 through fed-batch fermentation. This study broadens the repertoire of available 5-ALA synthases and transporters and provides a new platform for optimizing 5-ALA bioproduction.

Human breast milk (HBM) is composed of various components that are crucial for providing essential nutrients and enhancing infant immune system. Recently, the synthesis of HBM components through microbial fermentation has garnered significant attention due to its potential to reduce production costs, simplify manufacturing processes, and mitigate environmental pollution. However, this approach results in low yield and is difficult to scale up at the industrial level. Therefore, various synthetic biology tools have been used to enhance the efficiency of HBM component synthesis. This review first summarizes several synthetic biology tools that may improve HBM component production. Next, we have summarized HBM component production using microbial cell factories. Finally, we have summarized the challenges and opportunities presented by the construction of cell factories for the synthesis of HBM using synthetic biology tools. This article therefore provides a general guide to the construction of microbial cell factories for HBM components.

Scopoletin is a typical example of coumarins, which can be produced in plants. Scopoletin acts as a precursor for pharmaceutical and health care products, and also possesses promising biological properties, including antibacterial, anti-tubercular, anti-hypertensive, anti-inflammatory, anti-diabetic, and anti-hyperuricemic activity. Despite the potential benefits, the production of scopoletin using traditional extraction processes from plants is unsatisfactory. In recent years, synthetic biology has developed rapidly and enabled the effective construction of microbial cell factories for production of high value-added chemicals. Herein, this review summarizes the progress of scopoletin biosynthesis in artificial microbial cell factories. The two main pathways of scopoletin biosynthesis are summarized firstly. Then, synthetic microbial cell factories are reviewed as an attractive improvement strategy for biosynthesis. Emerging techniques in synthetic biology and metabolic engineering are introduced as innovative tools for the efficient synthesis of scopoletin. This review showcases the potential of biosynthesis of scopoletin in artificial microbial cell factories.

Microbial synthesis of glycosaminoglycans and their oligosaccharides.

De novo production of 1,3-olein-2-palmitin (OPO) and 1-olein-2-palmitin-3-linolein (OPL) by multiplexed reconstruction of lipid metabolism in yeasts.

Mining and design of biosensors for engineering microbial cell factory

The isoflavonoid derivatives, pterocarpans and coumestans, are explored for multiple clinical applications as osteo-regenerative, neuroprotective and anti-cancer agents. The use of plant-based systems to produce isoflavonoid derivatives is limited due to cost, scalability, and sustainability constraints. Microbial cell factories overcome these limitations in which model organisms such as Saccharomyces cerevisiae offer an efficient platform to produce isoflavonoids. Bioprospecting microbes and enzymes can provide an array of tools to enhance the production of these molecules. Other microbes that naturally produce isoflavonoids present a novel alternative as production chassis and as a source of novel enzymes. Enzyme bioprospecting allows the complete identification of the pterocarpans and coumestans biosynthetic pathway, and the selection of the best enzymes based on activity and docking parameters. These enzymes consolidate an improved biosynthetic pathway for microbial-based production systems. In this review, we report the state-of-the-art for the production of key pterocarpans and coumestans, describing the enzymes already identified and the current gaps. We report available databases and tools for microbial bioprospecting to select the best production chassis. We propose the use of a holistic and multidisciplinary bioprospecting approach as the first step to identify the biosynthetic gaps, select the best microbial chassis, and increase productivity. We propose the use of microalgal species as microbial cell factories to produce pterocarpans and coumestans. The application of bioprospecting tools provides an exciting field to produce plant compounds such as isoflavonoid derivatives, efficiently and sustainably.

BackgroundThe suitability of bacteria as microbial cell factories is dependent on several factors such as price of feedstock, product range, production yield and ease of downstream processing. The facultative methylotroph Bacillus methanolicus is gaining interest as a thermophilic cell factory for production of value-added products from methanol. The aim of this study was to expand the capabilities of B. methanolicus as a microbial cell factory by establishing a system for secretion of recombinant proteins.ResultsNative and heterologous signal peptides were tested for secretion of α-amylases and proteases, and we have established the use of the thermostable superfolder green fluorescent protein (sfGFP) as a valuable reporter protein in B. methanolicus. We demonstrated functional production and secretion of recombinant proteases, α-amylases and sfGFP in B. methanolicus MGA3 at 50 °C and showed that the choice of signal peptide for optimal secretion efficiency varies between proteins. In addition, we showed that heterologous production and secretion of α-amylase from Geobacillus stearothermophilus enables B. methanolicus to grow in minimal medium with starch as the sole carbon source. An in silico signal peptide library consisting of 169 predicted peptides from B. methanolicus was generated and will be useful for future studies, but was not experimentally investigated any further here.ConclusionA functional system for recombinant production of secreted proteins at 50 °C has been established in the thermophilic B. methanolicus. In addition, an in silico signal peptide library has been generated, that together with the tools and knowledge presented in this work will be useful for further development of B. methanolicus as a host for recombinant protein production and secretion at 50 °C.

Microbial cell factories (MCFs) are extensively used to produce a wide array of bioproducts, such as bioenergy, biochemical, food, nutrients, and pharmaceuticals, and have been regarded as the "chips" of biomanufacturing that will fuel the emerging bioeconomy era. Biotechnology advances have led to the screening, investigation, and engineering of an increasing number of microorganisms as diverse MCFs, which are the workhorses of biomanufacturing and help develop the bioeconomy. This review briefly summarizes the progress and strategies in the development of robust and efficient MCFs for sustainable and economic biomanufacturing. First, a comprehensive understanding of microbial chassis cells, including accurate genome sequences and corresponding annotations; metabolic and regulatory networks governing substances, energy, physiology, and information; and their similarity and uniqueness compared with those of other microorganisms, is needed. Moreover, the development and application of effective and efficient tools is crucial for engineering both model and nonmodel microbial chassis cells into efficient MCFs, including the identification and characterization of biological parts, as well as the design, synthesis, assembly, editing, and regulation of genes, circuits, and pathways. This review also highlights the necessity of integrating automation and artificial intelligence (AI) with biotechnology to facilitate the development of future customized artificial synthetic MCFs to expedite the industrialization process of biomanufacturing and the bioeconomy.

Increasing production yield of tyrosine and mevalonate through inhibition of biomass formation

Lipophilic compounds have a variety of positive effects on human physiological functions and exhibit good effects in the prevention and treatment of clinical diseases. This has led to significant interest in the technical applications of synthetic biology for the production of lipophilic compounds. However, the strict selective permeability of the cell membrane and the hydrophobic nature of lipophilic compounds pose significant challenges to their production. During fermentation, lipophilic compounds tend to accumulate within cell membrane compartments rather than being secreted extracellularly. The toxic effects of excessive lipophilic compound accumulation can threaten cell viability, while the limited space within the cell membrane restricts further increases in production yield. Consequently, to achieve efficient production of lipophilic compounds, research is increasingly focused on constructing robust and multifunctional microbial cell factories. Utilizing membrane engineering techniques to construct highly flexible cell membranes is considered an effective strategy to break through the upper limit of lipophilic compound production. Currently, there are two main approaches to cell membrane modification: constructing artificial storage compartments for lipophilic compounds and engineering the cell membrane structure to facilitate product outflow. This review summarizes recent cell membrane engineering strategies applied in microbial cell factories for the production of liposoluble compounds, discussing the challenges and future prospects. These strategies enhance membrane flexibility and effectively promote the production of liposoluble compounds.

Lignocellulose is the most abundantly sustainable raw material on the earth. To increase the utilization of sustainable lignocellulosic biomass, yeast, especially Saccharomyces cerevisiae, is used as a microbial cell factory to produce renewable chemicals like ethanol, butanol, or other fermentative products from lignocellulosic biomass. The cost of cellulolytic enzymes including cellulase and hemi cellulase is one of the limitations for industrial applications. Combining the cellulolytic enzyme expression and chemical production is a promising strategy to improve cost efficiency. Although cellulolytic enzyme-encoding genes have been expressed in yeast for enzyme characterization and protein engineering, co-expression of multiple cellulolytic enzyme genes is required to enable the non-cellulolytic yeast to utilize lignocellulose. Types of co-expressed systems include free cellulolytic enzyme, surface-displayed enzyme, or artificial minicellulosome. However, a lignocellulosic biomass utilizing strain with practical applications has been not constructed so far. The low efficiency of cellulolytic enzyme expression is the major roadblock hampering the generation of the desired strain. Although strong promoter, multiple gene copies, and codon optimization improve the gene expression, the protein misfolding, glycosylation, and vesicle transportation during secretion are more critical. Co-expression of multiple cellulolytic enzymes in an optimal ratio is also a challenging in cellulolytic yeast construction. Other than S. cerevisiae, nonconventional yeasts such as Kluyveromyces marxianus and Yarrowia lipolytica with special properties such as thermotolerance, xylose utilization, and lipid production are also good candidates for lignocellulosic biomass utilizing microbial cell factory construction.

Expelling heterologous compounds out of hosts by transporters is a potential strategy to enhance product titers in microbial cell factories. In this work, to increase heterologous polyketide 6-deoxyerythronolide B (6dEB, erythromycin precursor) production, tripartite multidrug efflux pumps MacAB-TolC, AcrAB-TolC, MdtEF-TolC, and MexAB-OprM were modulated in a 6dEB production strain. Compared with the control, overexpression of a single component of efflux pumps (except oprM) repressed 6dEB production, but modulation of two components MacA and MacB or the complete pumps MacAB-TolC and MdtEF-TolC significantly improved 6dEB titer by 100 ± 11, 118 ± 54, and 98 ± 12 %, respectively. In addition, to avoid the challenging fine-tuning components of pumps, the transcriptional regulators of efflux pumps were modulated to improve the 6dEB production. Overexpression of RpoH (activator of MdtEF-TolC) and EvgA (activator of EmrKY-TolC and AcrAD-TolC) strongly increased 6dEB titer by 152 ± 54 and 142 ± 85 %, respectively. This is the first report of transporter engineering for improving heterologous polyketide production in Escherichia coli. Our results provide an effective strategy for improving the yield of the heterologous products in chassis cell.

Monitoring intracellular pyruvate is useful for the exploration of fundamental metabolism and for guiding the construction of yeast cell factories for chemical production. Here, we employed a genetically encoded fluorescent Pyronic biosensor to light up the pyruvate metabolic state in the cytoplasm, nucleus, and mitochondria of Saccharomyces cerevisiae BY4741. A strong correlation was observed between the pyruvate fluctuation in mitochondria and cytoplasm when exposed to different metabolites. Further metabolic analysis of pyruvate uptake and glycolytic dynamics showed that glucose and fructose dose-dependently activated cytoplasmic pyruvate levels more effectively than direct exposure to pyruvate. Meanwhile, the Pyronic biosensor could visually distinguish phenotypes of the wild-type S. cerevisiae BY4741 and the pyruvate-hyperproducing S. cerevisiae TAM at a single-cell resolution, having the potential for high-throughput screening. Overall, Pyronic biosensors targeting different suborganelles contribute to mapping and studying the central carbon metabolism in-depth and guide the design and construction of yeast cell factories.