Age Estimation by Super-Resolution Reconstruction Based on Adversarial Networks

In this paper, we study face hallucination, or synthesizing a high-resolution face image from an input low-resolution image, with the help of a large collection of other high-resolution face images. Our theoretical contribution is a two-step statistical modeling approach that integrates both a global parametric model and a local nonparametric model. At the first step, we derive a global linear model to learn the relationship between the high-resolution face images and their smoothed and down-sampled lower resolution ones. At the second step, we model the residue between an original high-resolution image and the reconstructed high-resolution image after applying the learned linear model by a patch-based non-parametric Markov network to capture the high-frequency content. By integrating both global and local models, we can generate photorealistic face images. A practical contribution is a robust warping algorithm to align the low-resolution face images to obtain good hallucination results. The effectiveness of our approach is demonstrated by extensive experiments generating high-quality hallucinated face images from low-resolution input with no manual alignment.

Age estimation using face images has been widely employed across various fields. Because the characteristics of face images usually vary greatly depending on race, camera type, lighting, and other environmental factors, the recognition ability of untrained heterogeneous face image databases is not accurate by previous methods. Therefore, various attempts have been made where different heterogeneous databases were combined to enable training; however, the training time is extended and diverse environmental variables in databases cannot be sufficiently trained. To address these issues, this study proposes modified cycle-consistent generative adversarial network (CycleGAN) that generates an even distribution of heterogeneous face data, and an age-estimation method that is effective for heterogeneous data based on comparative CNN for age estimation (CCNNAE). In addition, we propose the method of reducing the errors caused by image transformation in modified CycleGAN through adaptive selection between transformed and original face images for the input to CCNNAE, which is based on age similarity between the transformed face image and the original face image. Experiments with two open databases, MORPH and MegaAge databases showed that our method outperformed the state-of-the art methods.

Modern face recognition systems extract face representations using deep neural networks (DNNs) and give excellent identification and verification results, when tested on high resolution (HR) images. However, the performance of such an algorithm degrades significantly for low resolution (LR) images. A straight forward solution could be to train a DNN, using simultaneously, high and low resolution face images. This approach yields a definite improvement at lower resolutions but suffers a performance degradation for high resolution images. To overcome this shortcoming, we propose to train a network using both HR and LR images under the guidance of a fixed network, pretrained on HR face images. The guidance is provided by minimising the KL-divergence between the output Softmax probabilities of the pretrained (i.e., Teacher) and trainable (i.e., Student) network as well as by sharing the Softmax weights between the two networks. The resulting solution is tested on down-sampled images from FaceScrub and MegaFace datasets and shows a consistent performance improvement across various resolutions. We also tested our proposed solution on standard LR benchmarks such as TinyFace and SCFace. Our algorithm consistently outperforms the state-of-the-art methods on these datasets, confirming the effectiveness and merits of the proposed method.

Due to the real working conditions, the collected mechanical fault datasets are actually limited and always highly imbalanced, which restricts the diagnosis accuracy and stability. To solve these problems, we present an imbalanced fault diagnosis method based on the generative model of conditional-deep convolutional generative adversarial network (C-DCGAN) and provide a study in detail. Deep convolutional generative adversarial network (DCGAN), based on traditional generative adversarial networks (GAN), introduces convolutional neural network into the training for unsupervised learning to improve the effect of generative networks. Conditional generative adversarial network (CGAN) is a conditional model obtained through introducing conditional extension into GAN. C-DCGAN is a combination of DCGAN and CGAN. In C-DCGAN, based on the feature extraction ability of convolutional networks, through the structural optimization, conditional auxiliary generative samples are used as augmented data and applied in machine fault diagnosis. Two datasets (Bearing dataset and Planetary gear box dataset) are carried out to validate. The simulation experiments showed that the improved performance is mainly due to the generated signals from C-DCGAN to balance the dataset. The proposed method can deal with imbalanced fault classification problem much more effectively. This model could improve the accuracy of fault diagnosis and the generalization ability of the classifier in the case of small samples and display better fault diagnosis performance.

This paper proposes a method of synthesizing a high-resolution facial image from a low-resolution facial image based on top-down learning. A face is represented by a linear combination of prototypes of shape and texture. With the shape and texture information about the pixels in an given low-resolution facial image, we can estimate optimal coeficients for a linear combination of prototypes of shape and those of texture by solving least square minimization. Then high-resolution facial image can be synthesized by using the optimal coeficients for linear combination of the high-resolution prototypes. The encouraging results of the proposed method show that our method can be used to increase the performance of the face recognition by applying our method to enhance the low-resolution facial images captured at surveillance systems.KeywordsFace RecognitionFacial ImageInput FaceBicubic InterpolationReference FaceThese keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

We are researching about an age and gender estimation based on wrinkle texture and color of facial images. A preliminary questionnaire (enquete) examination on how effectively the facial images could be used for gender and age estimations was executed by using 300 different faces and 21 examinees. Wrinkles appearing in the face and the shape and size of the facial parts are selected to model the age and gender estimation in this research basing on this enquete. Basing on this preliminary consideration, an image-processing algorithm for wrinkle modeling, was proposed. In addition, a method for making relationships between facial images and their keywords was proposed by using the latent semantic indexing. An efficient interface for displaying the relationships among keywords and facial images has been introduced with 2D/3D-feature space defined by the indexing.

This project is intended to gift the ability of expression to the speech deprived by building a module that extracts thoughts from the human brain and presents it to the outside world as a digital image. This novel approach reconstructs same images of different colours from the EEG brain waves. Standalone datasets are being used to train the model which is obtained by using Enobio8 headset. EEG signals are acquired by providing six different shapes of three unique colors as the visual stimuli. After processing these signals EEG features are extracted using a convolutional Neural Network (CNN). The extracted features alongside noise are passed as an input to conditional Deep Convolutional Generative Adversarial Networks (cDCGANs) and conditional Generative Adversarial Networks (cGANs) which reconstruct the visual stimuli corresponding to the EEG data. The results obtained by the same are noted and analysed. The paper explicitly compares the working and performance of cGAN and cDCGAN models.

Conditional Generative Adversarial Network (GAN) is a GAN that generates data with the desired condition from the latent vector. The auxiliary classifier GAN is the most used among the variations of conditional GANs. In this study, we explain the problem of auxiliary classifier GAN and propose conditional activation GAN that can replace auxiliary classifier GAN to reduce the number of hyperparameters and improve training speed. The loss function of conditional activation GAN is defined as the sum of the loss of each GAN created for each condition. Since each GAN shares all hidden layers, the GANs can be considered as a single GAN and it does not increase the amount of computation much. Also, in order to prevent ignorance of conditions in the discriminator of conditional GANs with batch normalization, we propose a mixed batch training, in which each batch for discriminator is always configured to have the same ratio of real data and generated data so that each batch always has the similar condition distribution

Presently, facial image recognition via a thermal camera is a critical phase in numerous fields. Systems using thermal facial images suffer from numerous problems in face identification. In this paper, a model Edge-Aided Generative Adversarial Network (EA-GAN) is introduced to overcome the difficulties of thermal face identification by synthesizing a visible faces image from the thermal version. To enhance the performance of the Conditional Generative Adversarial Network (CGAN) model for the create realistic face images, the edge information extracted from the thermal image has been used as input, thus lead to improving overall the system's achievement. Moreover, a new model is presented in the present work for face identification by integrating two Convolutional Neural Networks (CNN) to achieve high and rapid accuracy rates. Based on the experiments on the Carl dataset for faces, it is indicated that EA-GAN can synthesize visually comfortable and identity-preserving faces; thus, better performance is achieved in comparison with the state-of-the-art approaches for thermal facial identification.

We demonstrate the feasibility of solving atmospheric remote sensing problems with machine learning using conditional generative adversarial networks (CGANs), implemented using convolutional neural networks. We apply the CGAN to generating two‐dimensional cloud vertical structures that would be observed by the CloudSat satellite‐based radar, using only the collocated Moderate‐Resolution Imaging Spectrometer measurements as input. The CGAN is usually able to generate reasonable guesses of the cloud structure and can infer complex structures such as multilayer clouds from the Moderate‐Resolution Imaging Spectrometer data. This network, which is formulated probabilistically, also estimates the uncertainty of its own predictions. We examine the statistics of the generated data and analyze the response of the network to each input parameter. The success of the CGAN in solving this problem suggests that generative adversarial networks are applicable to a wide range of problems in atmospheric science, a field characterized by complex spatial structures and observational uncertainties.

Based on Global Cancer 2015 statistics, the lung cancer of all types constitutes 27% of overall cancers while 19.5% of cancer deaths are due to lung cancer. In lieu of this, an effective lung cancer screening test using Computed Tomography (CT) scan is crucial to detect cancer at the early stage. The interpretation of the CT images requires an advanced CAD system of high accuracy for instance, in classifying the lung nodules. Recently, Deep Learning method that is Convolution Neural Network (CNN) shows an outstanding success in lung nodules classification. However, the training of CNN requires a great number of images. Such a requirement is an issue in the case of medical images. Generative adversarial network (GAN) has been introduced to generate new image datasets for CNN training. Thus, the main objective of this study is to compare the performance of CNN architectures with and without the implementation of GAN for lung nodules classification in CT images. Here, the study used Conditional GAN (cGAN) to generate benign nodules images. The classification accuracy of the combined cGAN-CNN architecture was compared among CNN pretraining networks namely GoogleNet, ShuffleNet, DenseNet, and MobileNet based on classification accuracy, specificity, sensitivity, and AUC-ROC values. The experiment was tested on LIDC-IDRI database. The results showed cGAN-CNN architecture improves the overall classification accuracy as compared to CNN alone with the cGAN-ShuffleNet architecture performed the best, achieving 98.38% accuracy, 98.13% specificity, 100% sensitivity and AUC-ROC at 99.90%. Overall, the classification performance of CNN can be improved by integrating GAN architecture to mitigate the constraint of having a large medical image dataset, in this case, CT lung nodules images.

We are researching about an age and gender estimation based on wrinkle texture and color of facial images. Preliminary questionnaire (enquete) examination of how effectively the facial images could be used for gender and age estimations was executed by using 300 different faces and 21 examinees. Wrinkles appeared in the face and the shape and size of the facial parts are selected to model the age and gender estimation in this research based on this enquete. Based on this preliminary consideration, an image processing algorithm for wrinkle modeling was proposed in this paper. In addition, a method for making relationships between facial images and their keywords was proposed by using the latent semantic indexing. An efficient interface for displaying the relationships among keywords and facial images has been introduced with 2D/3D-feature space defined by the indexing.

Load validity discrimination for telescopic boom of rock drilling jumbo

From real–time tumor classification to operative outcome prediction, applications of machine learning to neurosurgery are powerful. However, the translation of many of these applications are restricted by the lack of “big data” in neurosurgery. Important restrictions in patient privacy and sharing of imaging data reduce the diversity of the datasets used to train resulting models and therefore limit generalizability. Synthetic learning is a recent development in machine learning that generates synthetic data from real data and uses the synthetic data to train downstream models while preserving patient privacy. Such an approach has yet to be successfully demonstrated in the spine surgery domain. Spine radiographs were collected from the VinDR–SpineXR dataset, with 1470 labeled as abnormal and 2303 labeled as normal. A conditional generative adversarial network (GAN) was trained on the radiographs to generate a spine radiograph and normal/abnormal label. A modified conditional GAN (SpineGAN) was trained on the same task. A convolutional neural network (CNN) was trained using the real data to label abnormal radiographs. A CNN was trained to label abnormal radiographs using synthetic images from the GAN and in a separate experiment from SpineGAN. Using the real radiographs, an AUC of 0.856 was achieved in abnormality classification. Training on synthetic data generated by the standard GAN (AUC of 0.814) and synthetic data generated by our SpineGAN (AUC of 0.830) resulted in similar classifier performance. SpineGAN generated images with higher FID and lower precision scores, but with higher recall and increased performance when used for synthetic learning. The successful application of synthetic learning was demonstrated in the spine surgery domain for the classification of spine radiographs as abnormal or normal. A modified domain–relevant GAN is introduced for the generation of spine images, evidencing the importance of domain–relevant generation techniques in synthetic learning. Synthetic learning can allow neurosurgery to use larger and more diverse patient imaging sets to train more generalizable algorithms with greater patient privacy.

Introduction: Forensic dentistry is essential for human identification, but traditional manual techniques are often time-intensive and prone to subjectivity. The integration of artificial intelligence (AI) presents a transformative opportunity to enhance accuracy and efficiency across various forensic odontology applications. This systematic review consolidates and analyzes the existing literature on AI applications in forensic dentistry. Materials and Methods: A comprehensive literature search was conducted in the PubMed and Scopus databases following the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. Studies published up to August 2025 were considered for inclusion. Results: A total of 116 studies were analyzed. The primary applications included age estimation (54 studies), gender estimation (33 studies), and human/dental identification (26 studies). Bite mark analysis (1 study) and facial reconstruction (2 studies) were identified as underexplored areas. Convolutional neural networks (CNNs) were the most frequently employed AI algorithm, utilized in 64% (74/116) of studies, while orthopantomograms (OPGs) were the predominant imaging modality in 72% (84/116) of investigations. Quantitative results demonstrated significant promise: age estimation models achieved a mean absolute error (MAE) as low as 0.0079 years and a peak classification accuracy of 99.98%; gender estimation models attained accuracies between 68% and 98%; and human identification models reached up to 100% accuracy in optimal conditions, though sensitivity dropped to 69% in complex postmortem cases. Emerging techniques, such as microbiome analysis and generative adversarial networks (GANs), were noted as innovative future directions. Conclusion: AI demonstrates significant potential to improve accuracy and reduce processing time in core forensic dentistry tasks, particularly age and gender estimation. However, challenges related to data privacy, algorithmic bias, and legal admissibility persist. Future research should prioritize the development of explainable AI models, standardized and diverse datasets, and robust regulatory frameworks to ensure ethical and trustworthy integration into forensic practice.