AgriPath: a robust multi-objective path planning framework for agricultural robots in dynamic field environments

Sampling-based search algorithms such as Rapidly-Exploring Random Trees (RRT) have been utilized for mobile robot path planning and motion planning in high dimensional continuous spaces. This paper presents a path planning method for a planetary exploration rover in rough terrain. The proposed method exploits the framework of a sampling-based search, the optimal RRT (RRT*) algorithm. The terrain geometry used for planning is composed of point cloud data close to continuous space captured by a light detection and ranging (LIDAR) sensor. During the path planning phase, the proposed RRT*algorithm directly samples a point (node) from the LIDAR point cloud data. The path planner then considers the rough terrain traversability of the rover during the tree expansion process of RRT*. This process improves conventional RRT*in that the generated path is safe and feasible for the rover in rough terrain. In this paper, simulation study on the proposed path planning algorithm in various real terrain data confirms its usefulness.

This research aims to create a simulator for solving the global path planning of mobile robots. Various sampling-based methods such as Rapidly-exploring Random Tree (RRT), RRT*, and Fast-RRT, along with other derivative algorithms, have been widely used to solve path-planning problems in mobile robots. The level of computational efficiency, path optimality, and the ability to adapt to variant environments are some of the issues that still arise, although these techniques have shown good results in many cases. Although the existing solutions are innovative, comparison between the existing methods is still difficult due to significant differences in convergence speed, implementation complexity, and quality of the resulting paths. This makes choosing the most suitable method for a particular application difficult. The simulator uses sampling-based path planning algorithms such as RRT*, Fast RRT*, RRT*-Smart, informed-RRT*, and Honey Bee Mating Optimization-based Fast-RRT*. With this simulator, users can easily compare the performance of each algorithm and see the characteristics and efficiency of each algorithm in various situations. By running all methods through this simulator, the user can easily compare the methods based on convergence speed and optimality. Therefore, it will effectively help users understand robot navigation, improve the quality of learning, and promote the development of path-planning technology for mobile robots.

As a sampling based path planning method, Rapidly-exploring Random Tree (RRT) is powerful for its high efficiency in finding feasible solutions. Optimal RRT (RRT*) improves RRT by asymptotically searching the optimal solution, however, at the cost of time consuming. This paper proposes an efficient optimal planning algorithm based on RRT* with adaptive restricted sampling space, which is inspired by the tropism of plants and named as tropistic RRT*. Tropistic RRT* improves the efficiency of the path planning by restricting the sampling space to approach the goal position just like the phototropism of plants. To validate our proposed algorithm, we carry out both path planning and motion planning experiments in 2D environments. In the path planning experiments, we compare the proposed algorithm with RRT* and Informed RRT* and experimental results show that our method outperforms the other two in the convergence rate, final solution cost and robustness. Furthermore, we also implement our algorithm in solving motion planning problem for a nonholonomic mobile robot and compare the time cost in the robot navigation process. Compared results exhibit that the time cost of our algorithm is much less than that of Real-Time RRT* in both static and dynamic environments.

This research presents a cooperation strategy for a heterogeneous group of robots that comprises two Unmanned Aerial Vehicles (UAVs) and one Unmanned Ground Vehicles (UGVs) to perform tasks in dynamic scenarios. This paper defines specific roles for the UAVs and UGV within the framework to address challenges like partially known terrains and dynamic obstacles. The UAVs are focused on aerial inspections and mapping, while UGV conducts ground-level inspections. In addition, the UAVs can return and land at the UGV base, in case of a low battery level, to perform hot swapping so as not to interrupt the inspection process. This research mainly emphasizes developing a robust Coverage Path Planning (CPP) algorithm that dynamically adapts paths to avoid collisions and ensure efficient coverage. The Wavefront algorithm was selected for the two-dimensional offline CPP. All robots must follow a predefined path generated by the offline CPP. The study also integrates advanced technologies like Neural Networks (NN) and Deep Reinforcement Learning (DRL) for adaptive path planning for both robots to enable real-time responses to dynamic obstacles. Extensive simulations using a Robot Operating System (ROS) and Gazebo platforms were conducted to validate the approach considering specific real-world situations, that is, an electrical substation, in order to demonstrate its functionality in addressing challenges in dynamic environments and advancing the field of autonomous robots.

Robotic path planning is a field of research which is gaining traction given the broad domains of interest to which path planning is an important systemic requirement. The aim of path planning is to optimise the efficacy of robotic movement in a defined operational environment. For example, robots have been employed in many domains including: Cleaning robots (such as vacuum cleaners), automated paint spraying robots, window cleaning robots, forest monitoring robots, and agricultural robots (often driven using satellite and geostationary positional satellite data). Additionally, mobile robotic systems have been utilised in disaster areas and locations hazardous to humans (such as war zones in mine clearance). The coverage path planning problem describes an approach which is designed to determine the path that traverses all points in a defined operational environment while avoiding static and dynamic (moving) obstacles. In this paper we present our proposed Smooth-STC model, the aim of the model being to identify an optimal path, avoid all obstacles, prevent (or at least minimise) backtracking, and maximise the coverage in any defined operational environment. The experimental results in a simulation show that, in uncertain environments, our proposed smooth STC method achieves an almost absolute coverage rate and demonstrates improvement when measured against alternative conventional algorithms.

The online cooperative path planning problem is discussed for multi-quadrotor maneuvering in an unknown dynamic environment. Based on the related basic concepts, typical three-dimensional obstacle models, such as spherical and cubic, and their collision checking criteria are presented in this article. An improved rapidly exploring random tree (RRT) algorithm with goal bias and greed property is proposed based on the heuristic search strategy to overcome the shortcomings of the classical RRT algorithm. Not only are the kinematic constraints of the quadrotor established but the time and space coordination strategy matching with the improved RRT algorithm is also presented in this article. Furthermore, a novel online collision avoidance strategy according to the partial information of the surrounding environment is proposed. On the basis of the above work, a distributed online path planning strategy is proposed to obtain the feasible path for each quadrotor. Numerical simulation results show that the improved RRT algorithm has better search efficiency than the classical RRT algorithm. And the satisfactory path planning and path tracking results prove that the above model and related planning strategies are reasonable and effective.

In this paper a novel combination of data structures and algorithms is presented as a fast and efcient practical approach to path planning for unmanned vehicles. This approach utilizes an architecture that integrates effective obstacle representation using an efcient Quadtree data structure, with path planning based on a modied Rapidly-exploring Random Tree (RRT) algorithm, and a path pruning technique based on Dijkstra’s algorithm, resulting in rapid discovery of sub-optimal feasible paths. One of the computationally expensive steps of the RRT algorithm is checking RRT segments for collision with obstacles. To address this problem, an efcient obstacle representation using Quadtrees is implemented enabling fast segment checks. While the RRT approach is guaranteed to nd a feasible path through complex obstacle elds with the probability of discovery approaching one as the number of iterations increases, the resulting paths may be far from optimal as the only criterion embedded in the RRT search is feasibility. For this reason, the paths generated by the RRT algorithm are passed through Dijkstra algorithm that nds a shortest obstacle-free path among the points on the path. Dijkstra algorithm that re-samples the segments of the path and nds the shortest path among the new points is implemented resulting in paths that are very close to the optimal ones. To speed up the computation, the basic search algorithm is implemented as a dual RRT from the initial and nal points. To account for motion transients along the path, a suitable size corridor is introduced, assuring that the vehicle has enough room for maneuvering among the obstacles. This computationally efcient architecture lends itself to real-time implementation for both pre-planning with known obstacles as well as rapid reactive re-planning in the presence of new pop-up obstacles. The proposed technique is evaluated using several challenging path-planning examples characterized by a large number of non-convex constraints arising in cluttered obstacle elds with known and unknown obstacles. A modication that allows an easy way to introduce vehicle dynamics constraints or actuation failures is also implemented. Algorithms have been implemented for two as well as three dimensional path planning applications.

This paper presents a method for planning a motion for a humanoid robot performing manipulation tasks in a high dimensional space such that the energy consumption of the robot is minimized. While sampling-based path planning algorithms, such as rapidly-exploring random tree (RRT) and its variants, have been highly effective for complex path planning problems, it is still difficult to find the minimum cost path in a high dimensional space since RRT-based algorithms extend a search tree locally, requiring a large number of samples to find a good solution. This paper presents an efficient nonmyopic motion planning algorithm for finding a minimum cost path by combining RRT* and cross entropy (CE). The proposed method constructs two RRT trees: the first tree is a standard RRT tree which is used to determine the nearest node in the tree to a randomly chosen point and the second tree contains the first tree with additional long extensions. By maintaining two separate trees, we can grow the search tree non-myopically to improve efficiency while ensuring the asymptotic optimality of RRT*. We first identify and demonstrate the limitation of RRT* when it is applied to energy-efficient path planning in a high dimensional space. Results from experiments show that the proposed method consistently achieves the lowest energy consumption against other algorithms.

In order to solve the problems of slow convergence speed, insufficient accuracy, and easily falling into the local optimum of the traditional whale optimization algorithm (WOA) in mobile robot path planning, an improved whale optimization algorithm (IWOA) combined with the bird navigation mechanism was proposed. Specific improvement measures include using logical chaos mapping to initialize the population to enhance the randomness and diversity of the initial solution, designing a nonlinear convergence factor to prevent the algorithm from prematurely entering the shrinking surround phase and extending the global search time, introducing an adaptive spiral shape constant to dynamically adjust the search range to balance exploration and development capabilities, optimizing the individual update strategy in combination with the bird navigation mechanism, and optimizing the algorithm through companion position information, thereby improving the stability and convergence speed of the algorithm. Path planning simulations were performed on 30 × 30 and 50 × 50 grid maps. The results show that compared with WOA, MSWOA, and GA, in the 30 × 30 map, the path length of IWOA is shortened by 3.23%, 7.16%, and 6.49%, respectively; in the 50 × 50 map, the path length is shortened by 4.88%, 4.53%, and 28.37%, respectively. This study shows that IWOA has significant advantages in the accuracy and efficiency of path planning, which verifies its feasibility and superiority.

In this paper, an improved APF-GFARRT* (artificial potential field-guided fuzzy adaptive rapidly exploring random trees) algorithm based on APF (artificial potential field) guided sampling and fuzzy adaptive expansion is proposed to solve the problems of weak orientation and low search success rate when randomly expanding nodes using the RRT (rapidly exploring random trees) algorithm for disinfecting robots in the dense environment of disinfection operation. Considering the inherent randomness of tree growth in the RRT* algorithm, a combination of APF with RRT* is introduced to enhance the purposefulness of the sampling process. In addition, in the context of RRT* facing dense and restricted environments such as narrow passages, adaptive step-size adjustment is implemented using fuzzy control. It accelerates the algorithm’s convergence and improves search efficiency in a specific area. The proposed algorithm is validated and analyzed in a specialized environment designed in MATLAB, and comparisons are made with existing path planning algorithms, including RRT, RRT*, and APF-RRT*. Experimental results show the excellent exploration speed of the improved algorithm, reducing the average initial path search time by about 46.52% compared to the other three algorithms. In addition, the improved algorithm exhibits faster convergence, significantly reducing the average iteration count and the average final path cost by about 10.01%. The algorithm’s enhanced adaptability in unique environments is particularly noteworthy, increasing the chances of successfully finding paths and generating more rational and smoother paths than other algorithms. Experimental results validate the proposed algorithm as a practical and feasible solution for similar problems.

To ensure the safe production of mines, the intelligent trend of underground mining operations is gradually advancing. However, the operational environment of subterranean mining is intricate, making the conventional path-planning algorithm used by mining inspection robots frequently inadequate for real requirements. To safeguard the mining inspection robot, targeting the problem of low search efficiency and path redundancy in the path planning of the existing rapidly exploring random tree (RRT) algorithm in the narrow and complex unstructured environment, a path-planning algorithm combining improved RRT and a probabilistic road map (PRM) is proposed. Initially, the target area is efficiently searched according to the fan-shaped goal orientation strategy and the adaptive step size expansion strategy. Subsequently, the PRM algorithm and the improved RRT algorithm are combined to reduce the redundant points of the planning path. Ultimately, considering the kinematics of the vehicle, the path is optimized by the third-order Bessel curve. The experimental simulation results show that the proposed path-planning algorithm has a higher success rate, smoother path, and shorter path length than other algorithms in complex underground mining environments, which proves the effectiveness of the proposed algorithm.

The rapidly-exploring random trees (RRT) is a sampling-based path planner which utilizes simultaneously kinematics and dynamics of a robot. However, since the RRT has produced a robot path without taking the existence of dynamic obstacles into consideration, RRT-based navigation has the risk of a collision with dynamic obstacles. We proposed a path replanning technique for the RRT applied to robot navigation in dynamic environments, which is named grafting. The proposed technique replans a safe and efficient path in real time instead of the original path which may cause a collision with dynamic obstacles. Moreover, the replanned path can be easily merged into the original RRT path because the grafting technique preserves the property of the RRT. The grafting technique was tested by simulations in various dynamic environments, which revealed that the grafting technique was capable of replanning a safe and efficient path for RRT-based navigation in real time.

Autonomous unmanned aerial vehicle (UAV) can be utilized to replace humans to do hard work or work in dangerous environment. Path planning is one of the crucial technologies for intelligent flight of UAV. The Rapidly-exploring Random Tree (RRT) has a wide range of applications in path planning with the advantage of the sampling-based path planning which avoids complex construction of the configuration space. However, these methods perform a uniform random sampling and thus do not lead to the most efficient solution. In this paper, in order to improve the efficiency of the traditional RRT, a heuristic strategy with goal-bias was exploited and incorporated in the traditional RRT. A simulation platform was built to assess the performance of the improved algorithm and analyze the influences of the parameters, and a flight test platform was established based on the DJI Matrice 100 to carry out the flight experiments of UAV path planning. The simulations proved that the heuristic RRT is much higher efficient than the standard version. The experiments validated the feasibility to apply the new RRT in the navigation for UAVs in reality.

Background: With the development of robotics, more and more robots are being used in industrial production. However, as the production environment surrounding the robots becomes increasingly complex, there is a need for more intelligent industrial robots. For improving the intelligence of industrial robots, the most important thing is to ensure that they can carry out safe industrial production activities in a complex production environment. Therefore, studying the autonomous dynamic obstacle avoidance path planning of industrial robots in complex environments is of great significance for improving the intelligence of industrial robots and the application of human-machine collaboration. Objective: The main purpose of this paper is to improve the traditional artificial potential field method. It aims to improve the disadvantages of the traditional artificial potential field method, such as falling into the local minimum and failing to reach the target. Secondly, the background difference method, which is based on binocular vision and Kalman filtering algorithm, is used, and the environmental map containing the static and dynamic obstacles is obtained. After obtaining the information on the position of static and dynamic obstacles, the robot arm can make good use of the improved artificial potential field method to plan its own trajectory, thus realizing the dynamic obstacle avoidance of the robot arm in a complex environment. Methods: This paper proposes an improved artificial potential field method. First of all, in order to solve the problem of not being able to achieve the goal, the method of modifying the repulsion field function, as proposed by Wang Huili and others, has been cited. In the traditional repulsion function, the relative distance between the robot and the target is introduced. Due to this, the target point is always the minimum point of the potential field. It is necessary to ensure that the robot can reach the target position smoothly. For the local minimum problem, by adding a gravitational increase factor β, the gravitational force received is greater than the repulsive force, thereby breaking the balance of the resultant force. Finally, for the traditional artificial potential field method that does not consider the path planning problem in the presence of dynamic obstacles, the velocity vector of the dynamic obstacle is brought into the potential field function to improve the traditional artificial potential field method. Results: The robot easily falls into the local optimum during path planning, and the improved artificial potential field method overcomes this shortcoming. Therefore, the manipulator can perform autonomous dynamic obstacle avoidance path planning in an environment with dynamic obstacles, finally reaching the target point safely. Conclusions: The industrial production field faces an increasing demand for intelligent industrial robots. This paper improves on the traditional artificial potential field method based on binocular vision so that the mechanical arm can avoid dynamic obstacles autonomously in the presence of dynamic obstacles, thereby improving the degree of intelligence of the robotic arm, enabling the technology to meet the needs of future industrial development and contribute to the development of future industrial robot technology.

Many path planning algorithms have been introduced so far, but most are costly, in path cost and in processing time, in large-scale uncluttered 3D environments such as underground mining stopes explored by an unmanned aerial vehicle (UAV). Rapidly-exploring Random Tree (RRT) algorithms are popular because of their probabilistic completeness and rapidity in finding a feasible path in single-query problems. Many of the algorithms (e.g. Informed RRT*, RRT#) developed to improve RRT need considerable time to converge in large environments. Shortcutting an RRT is an old idea that has been proven to outperform RRT variants. This paper introduces a new method, RRT-Rope, that aims at finding a near-optimal solution in a drastically shorter amount of time. The proposed approach benefits from fast computation of a feasible path with an altered version of RRT-connect, and post-processes it quickly with a deterministic shortcutting technique, taking advantage of intermediate nodes added to each branch of the tree. This paper presents simulations and statistics carried out to show the efficiency of RRT-Rope, which gives better results in terms of path cost and computation time than other popular RRT variations and shortening techniques in all our simulation environments, and is up to 70% faster than the next best algorithm in a representative stope.