An Adaptive Output Feedback Controller for Robot Arms: Stability and Experiments

A new adaptive controller for robot manipulators is proposed. The new approach uses only position measurements. The main conclusions derived from the closed-loop system analysis are in two main results. In the first one, the global convergence of the position and velocity tracking errors is stated by using a condition that relates the viscous friction damping and the desired joint speed. In the second one, such a condition is dropped out but the local exponential stability of the closed-loop system is shown. To confirm the theoretical conclusions, a detailed experimental study in a two degrees-of-freedom direct-drive manipulator is provided, where the performance of the new controller is compared with respect to a known output feedback adaptive controller.

With the increasing complexity of control systems in industrial process control, traditional controllers are greatly limited in many occasions, so the development of new controller is extremely urgent. This paper combines adaptive feedback control with PID control, and designs a new type of adaptive PID feedback controller. The designed controller is verified by establishing a physical model of the 6-DOF collaborative robot. On the basis of improved adaptive PID feedback control, precise tracking control of multi-DOF cooperative robots is achieved, which improves response speed and eliminates steady-state errors. The designed controller is compared with classical PID control and adaptive control. The steady-state performance, dynamic performance, and anti-interference performance of position control and velocity control are analyzed. The improved adaptive PID feedback control has better control performance. The feasibility and reliability of the adaptive PID feedback controller for collaborative robots are verified.

This paper focuses on the problem of adaptive output feedback tracking control for a class of non-strict-feedback nonlinear systems with unknown control coefficients. By employing a linear state transformation, the original system is transformed to a new system for which control design becomes feasible. Then, after the introduction of a simple input-driven observer, an adaptive output feedback controller which contains only one parameter is developed for such systems by using backstepping technique and variable separation method. The designed controller ensures that all the signals in the closed-loop systems are Semi-globally Uniformly Ultimately Bounded (SGUUB).

Both dynamic state feedback as well as output feedback tracking control designs are presented in this paper for constrained robot systems under parametric uncertainties and external disturbances. The previous studies on tracking control design, not considering the velocity measurements, address only the unconstrained robot design. In contrast, a dynamic output feedback controller based on a linear and reduced-order observer that uses only position measurements is proposed here for the first time to treat the trajectory tracking control problem of constrained robot systems. Both adaptive state feedback control schemes and adaptive output feedback control schemes with a guaranteed H∞ performance are constructed. It is shown that all the variables of the closed-loop system are bounded and a pre-assigned H∞ tracking performance is achieved, in the sense that the influence of external disturbance on the tracking motion error can be attenuated to any specified level. Moreover, it is also shown that the motion and force trajectories asymptotically converge to the desired ones as the dynamic model of robot systems is well-known and the external disturbance is neglected. Finally, simulation examples are presented to illustrate the tracking performance of a two-link robotic manipulator with a circular path constraint by the proposed control algorithms. © 1998 John Wiley & Sons, Ltd.

This work introduces the design of an adaptive tracking control strategy for a 6-DOF Staubli TX2-60L industrial robot manipulator operating under dynamic model uncertainties caused by variable payloads. A complete kinematic and dynamic model of the robot is derived using Denavit–Hartenberg parameters and the Lagrangian formulation, respectively. To address the limitations of conventional control methods under payload variations, an adaptive controller is designed, which continuously updates its parameters based on real-time tracking errors. A Lyapunov stability analysis is conducted to rigorously establish that the closed-loop system guarantees convergent tracking errors and bounded internal states. Simulation studies with different payload scenarios, including no load, step load variation, and continuous load changes, show the performance of the proposed control strategy. The results confirm that the adaptive controller maintains precise trajectory tracking and robust stability despite significant model uncertainties, highlighting its suitability for industrial pick-and-place and high-precision automation tasks. Keywords: Robot manipulator, kinematic model, dynamic model, variable payloads, adaptive control, stability analysis.

In this paper, we propose an adaptive fuzzy output feedback control method for trajectory tracking control problem for robotic systems. Using Lyapunov method, we first develop a stable adaptive fuzzy state feedback control algorithm by assuming that the systems output and its derivatives are available for feedback control design. The algorithm combines fuzzy systems with robust adaptive controller. The fuzzy system approximates the certainty equivalent (CE)-based optimal controller while robustifying adaptive control term is used to cope with uncertainties that appeared from the effect of external disturbance, fuzzy approximation errors and other modeling errors. Then, an output feedback form of the position-velocity (state feedback) controller is proposed where unknown velocity signal is replaced by the output of model-free linear estimator. We show via asymptotic analysis that the tracking performance of the output feedback design can recover the performance achieved under the state feedback control design. Finally, the proposed method is implemented and evaluated on a 2-DOF robotic system to demonstrate the theoretical development for the real-time applications.

This paper focuses on the adaptive control problems for a class of interconnected systems. The nonLinear uncertainties of the systems under study are bounded by polynomial functions with unknown gains. Firstly, the adaptive feedback controller is proposed to guarantee the stabiLity of the closed-loop system. Then the proposed adaptive idea is extended to robust stabiLizing designing method for a class of large-scale interconnected systems. Based on Lyapunov's theory and LMI method, we can deal with the time-delay term in the system and construct the corresponding adaptive control and state feedback controller. Finally, an illustrative example is given to show the vaLidity of the proposed approach.

Robust adaptive fuzzy filters output feedback control of strict-feedback nonlinear systemsIn this paper, an adaptive fuzzy robust output feedback control approach is proposed for a class of single input single output (SISO) strict-feedback nonlinear systems without measurements of states. The nonlinear systems addressed in this paper are assumed to possess unstructured uncertainties, unmodeled dynamics and dynamic disturbances, where the unstructured uncertainties are not linearly parameterized, and no prior knowledge of their bounds is available. In recursive design, fuzzy logic systems are used to approximate unstructured uncertainties, and K-filters are designed to estimate unmeasured states. By combining backstepping design and a small-gain theorem, a stable adaptive fuzzy output feedback control scheme is developed. It is proven that the proposed adaptive fuzzy control approach can guarantee the all the signals in the closed-loop system are uniformly ultimately bounded, and the output of the controlled system converges to a small neighborhood of the origin. The effectiveness of the proposed approach is illustrated by a simulation example and some comparisons.

In this paper, an adaptive fuzzy output feedback control approach is investigated for a class of stochastic nonlinear strict-feedback systems without the requirement of states measurement. The stochastic nonlinear system addressed in this paper is assumed to possess unstructured uncertainties (unknown nonlinear functions) and, in the presence of unmodeled dynamics, dynamics disturbances. Fuzzy logic systems are used to approximate the unstructured uncertainties, and a fuzzy state observer is designed to estimate the unmeasured states. By combining the backstepping design technique with the stochastic small-gain approach, a new adaptive fuzzy output feedback control approach is developed. It is proved that the proposed control approach can guarantee that the closed-loop system is input-state-practically stability (ISpS) in probability, and the observer errors and the output of the system converge to a small neighborhood of the origin by appropriate choice of the design parameters. Simulation results are included to indicate that the proposed adaptive fuzzy control approach has a satisfactory control performance. In addition, the simulation comparisons with the previous methods show that the proposed adaptive fuzzy control approach has robustness to the dynamical uncertainties.

This paper deals with a design problem of an adaptive output feedback tracking control for systems with a parallel feedforward compensator (PFC) introduced in order to realize the output feedback exponential passive (OFEP) augmented control system. It is well known that one can easily design an adaptive output feedback control system for nonlinear systems satisfying the OFEP conditions. We adopt introduceing a PFC to make a non-OFEP nonlinear system OFEP and propose an adaptive control system design scheme which improves the control performance of the practical control system without the PFC. The effectiveness of the proposed method will be confirmed through experiments of a magnetic levitation system.

This paper investigates adaptive output feedback control problem for switched uncertain nonlinear systems with input quantization, unmeasured system states and state constraints. Firstly, fuzzy logic systems are introduced to identify system uncertainties, then the fuzzy based observer is constructed to estimate unavailable states. Secondly, combing the backstepping technique and the barrier Lyapunov function method, an adaptive fuzzy output feedback control law is designed, which guarantees that all signals in the closed-loop system are bounded, the system output tracks the reference signal, and system states satisfy their corresponding constraint conditions. Finally, simulation results further show the good performances of the proposed control scheme.

Command-filter-based adaptive tracking control for nonlinear systems with unknown input quantization and mismatching disturbances

Adaptive fuzzy tracking control for a class of uncertain nonaffine nonlinear systems with dead-zone inputs

The study presents an adaptive neural network output feedback tracking control scheme for a class of complicated agricultural mechanical systems. The scheme includes a dynamic gain observer to estimate the un-measurable states of the system. The main advantages of the authors scheme are that by introducing non-separation principle design neural network controller and the observer gain are simultaneously tuned according to output tracking error, the semi-globally ultimately bounded of output tracking error and all the states in the closed-loop system can be achieved by Lyapunov approach. With the universal approximation property of NN and the simultaneous parametrisation, no Lipschitz assumption and SPR condition are employed which makes the system construct simple. Finally the simulation results are presented to demonstrate the efficiency of the control scheme.

A crucial role is played by steering-angle prediction in the control of autonomous vehicles (AVs). It mainly includes the prediction and control of the steering angle. However, the prediction accuracy and calculation efficiency of traditional YOLOv5 are limited. For the control of the steering angle, angular velocity is difficult to measure, and the angle control effect is affected by external disturbances and unknown friction. This paper proposes a lightweight steering angle prediction network model called YOLOv5Ms, based on YOLOv5, aiming to achieve accurate prediction while enhancing computational efficiency. Additionally, an adaptive output feedback control scheme with output constraints based on neural networks is proposed to regulate the predicted steering angle using the YOLOv5Ms algorithm effectively. Firstly, given that most lane-line data sets consist of simulated images and lack diversity, a novel lane data set derived from real roads is manually created to train the proposed network model. To improve real-time accuracy in steering-angle prediction and enhance effectiveness in steering control, we update the bounding box regression loss function with the generalized intersection over union (GIoU) to Shape-IoU_Loss as a better-converging regression loss function for bounding-box improvement. The YOLOv5Ms model achieves a 30.34% reduction in weight storage space while simultaneously improving accuracy by 7.38% compared to the YOLOv5s model. Furthermore, an adaptive output feedback control scheme with output constraints based on neural networks is introduced to regulate the predicted steering angle via YOLOv5Ms effectively. Moreover, utilizing the backstepping control method and introducing the Lyapunov barrier function enables us to design an adaptive neural network output feedback controller with output constraints. Finally, a strict stability analysis based on Lyapunov stability theory ensures the boundedness of all signals within the closed-loop system. Numerical simulations and experiments have shown that the proposed method provides a 39.16% better root mean squared error (RMSE) score than traditional backstepping control, and it achieves good estimation performance for angles, angular velocity, and unknown disturbances.