An Adaptive Task Migration Scheduling Approach for Edge‐Cloud Collaborative Inference

Deep neural network (DNN) models typically have many hyperparameters that can be configured to achieve optimal performance on a particular dataset. Practitioners usually tune the hyperparameters of their DNN models by training a number of trial models with different configurations of the hyperparameters, to find the optimal hyperparameter configuration that maximizes the training accuracy or minimizes the training loss. As such hyperparameter tuning usually focuses on the model accuracy or the loss function, it is not clear and remains under-explored how the process impacts other performance properties of DNN models, such as inference latency and model size. On the other hand, standard DNN models are often large in size and computing-intensive, prohibiting them from being directly deployed in resource-bounded environments such as mobile devices and Internet of Things (IoT) devices. To tackle this problem, various model optimization techniques (e.g., pruning or quantization) are proposed to make DNN models smaller and less computing-intensive so that they are better suited for resource-bounded environments. However, it is neither clear how the model optimization techniques impact other performance properties of DNN models such as inference latency and battery consumption, nor how the model optimization techniques impact the effect of hyperparameter tuning (i.e., the compounding effect). Therefore, in this paper, we perform a comprehensive study on four representative and widely-adopted DNN models, i.e., CNN image classification , Resnet-50 , CNN text classification , and LSTM sentiment classification , to investigate how different DNN model hyperparameters affect the standard DNN models, as well as how the hyperparameter tuning combined with model optimization affect the optimized DNN models, in terms of various performance properties (e.g., inference latency or battery consumption). Our empirical results indicate that tuning specific hyperparameters has heterogeneous impact on the performance of DNN models across different models and different performance properties. In particular, although the top tuned DNN models usually have very similar accuracy, they may have significantly different performance in terms of other aspects (e.g., inference latency). We also observe that model optimization has a confounding effect on the impact of hyperparameters on DNN model performance. For example, two sets of hyperparameters may result in standard models with similar performance but their performance may become significantly different after they are optimized and deployed on the mobile device. Our findings highlight that practitioners can benefit from paying attention to a variety of performance properties and the confounding effect of model optimization when tuning and optimizing their DNN models.

Deep learning is being incorporated in many modern software systems. Deep learning approaches train a deep neural network (DNN) model using training examples, and then use the DNN model for prediction. While the structure of a DNN model as layers is observable, the model is treated in its entirety as a monolithic component. To change the logic implemented by the model, e.g. to add/remove logic that recognizes inputs belonging to a certain class, or to replace the logic with an alternative, the training examples need to be changed and the DNN needs to be retrained using the new set of examples. We argue that decomposing a DNN into DNN modules— akin to decomposing a monolithic software code into modules—can bring the benefits of modularity to deep learning. In this work, we develop a methodology for decomposing DNNs for multi-class problems into DNN modules. For four canonical problems, namely MNIST, EMNIST, FMNIST, and KMNIST, we demonstrate that such decomposition enables reuse of DNN modules to create different DNNs, enables replacement of one DNN module in a DNN with another without needing to retrain. The DNN models formed by composing DNN modules are at least as good as traditional monolithic DNNs in terms of test accuracy for our problems.

Background and Objectives: This study investigated the usefulness of deep neural network (DNN) models based on 18F-fluorodeoxyglucose positron emission tomography (FDG-PET) and blood inflammatory markers to assess the therapeutic response in pyogenic vertebral osteomyelitis (PVO). Materials and Methods: This was a retrospective study with prospectively collected data. Seventy-four patients diagnosed with PVO underwent clinical assessment for therapeutic responses based on clinical features during antibiotic therapy. The decisions of the clinical assessment were confirmed as ‘Cured’ or ‘Non-cured’. FDG-PETs were conducted concomitantly regardless of the decision at each clinical assessment. We developed DNN models depending on the use of attributes, including C-reactive protein (CRP), erythrocyte sedimentation ratio (ESR), and maximum standardized FDG uptake values of PVO lesions (SUVmax), and we compared their performances to predict PVO remission. Results: The 126 decisions (80 ‘Cured’ and 46 ‘Non-cured’ patients) were randomly assigned with training and test sets (7:3). We trained DNN models using a training set and evaluated their performances for a test set. DNN model 1 had an accuracy of 76.3% and an area under the receiver operating characteristic curve (AUC) of 0.768 [95% confidence interval, 0.625–0.910] using CRP and ESR, and these values were 79% and 0.804 [0.674–0.933] for DNN model 2 using ESR and SUVmax, 86.8% and 0.851 [0.726–0.976] for DNN model 3 using CRP and SUVmax, and 89.5% and 0.902 [0.804–0.999] for DNN model 4 using ESR, CRP, and SUVmax, respectively. Conclusions: The DNN models using SUVmax showed better performances when predicting the remission of PVO compared to CRP and ESR. The best performance was obtained in the DNN model using all attributes, including CRP, ESR, and SUVmax, which may be helpful for predicting the accurate remission of PVO.

As training a high-performance deep neural network (DNN) model requires a large amount of data, powerful computing resources and expert knowledge, protecting well-trained DNN models from intellectual property (IP) infringement has raised serious concerns in recent years. Most existing methods using DNN watermarks to verify the ownership of the models after IP infringement occurs, which is reactive in the sense that they cannot prevent unauthorized users from using the model in the first place. Different from these methods, in this article, we propose an active authorization control and user’s fingerprint tracking method for the IP protection of DNN models by utilizing sample-specific backdoor attack. The proposed method inversely and multiplely exploits sample-specific trigger as the key to implement authorization control for DNN model, in which the generated triggers are imperceptible and sample-specific for clean images. Specifically, a U-Net model is used to generate backdoor instances. Then, the target model is trained on the clean images and backdoor instances, which are inversely labeled as wrong classes and correct classes, respectively. Only authorized users can use the target model normally by pre-processing the clean images through the U-Net model. Moreover, the images processed by the U-Net model will contain unique fingerprint that can be extracted to verify and track the corresponding user’s identity. This article is the first work that utilizes the sample-specific backdoor attack to implement active authorization control and user’s fingerprint management for DNN model under black-box scenarios. Extensive experimental results on ImageNet dataset and YouTube Aligned Face dataset demonstrate that the proposed method is effective in protecting the DNN model from unauthorized usage. Specifically, the protected model has a low inference accuracy (1.00%) for unauthorized users, while maintaining a normal inference accuracy (97.67%) for authorized users. Besides, the proposed method can achieve 100% fingerprint tracking success rates on both the ImageNet and YouTube Aligned Face datasets. Moreover, it is demonstrated that the proposed method is robust against fine-tuning attack, pruning attack, pruning attack with retraining, reverse-engineering attack, adaptive attack, and JPEG compression attack. The code is available at https://github.com/nuaaaisec/SSAT .

Decision of the model complexity is a significant challenge in contemporary data-driven modeling applications. Designing neural architecture involves the process of determining the optimal model complexity for deep neural networks (DNNs) models in order to uncover relationships in real-world data patterns. Consequently, optimizing DNN architectures is crucial for enhancing the practical approximation performance of DNN models to real-world data. This study implements a data-driven neuroevolution scheme for the optimal neural architecture search (NAS) and demonstrates a data-driven engineering application for cooling load estimation. The proposed neuroevolution scheme aims at evolving to the best generalizing DNN model that well suits the modeling complexity requirements of the dataset. To this end, the objective function for the neural architecture optimization process is simplified to the mean square error of the test dataset, which enables to reduce the risk of insufficient generalization during NAS. By employing this objective function for evolution field optimization (EFO), the proposed neuroevolution process can automatically achieve the optimal model complexity, preventing overfitting and underfitting cases, and thereby attaining almost the best generalization for the dataset. For this purpose, this approach combines parametric learning with the backpropagation algorithm and structural learning with EFO-based neural architecture search to address data-driven, optimal complexity DNN model generation problems. Effectiveness of the method is demonstrated in the cooling load estimation problem of residential buildings, and performances of the optimal DNN models with four objective functions are analyzed. The design of objective function for the best generalizing model is also elaborated.

In this article, for the first time, we propose channel characteristic-based deep neural network (DNN) models for accurate eye-height (EH) and eye-width (EW) estimation of high bandwidth memory (HBM) silicon interposer channels. The proposed models preprocess the design parameters that are highly relevant to the characteristics of the HBM channels. By taking account of the contribution of each design parameter to the eye diagram, the proposed models can accurately estimate the EH and EW of the channels even with a limited number of datasets. For verification, the proposed DNN models were applied to the microstrip and stripline channels of an HBM silicon interposer. Only redistributed layer (RDL) was used to clearly see the effect of reflecting the channel characteristics of the proposed method. We compared the proposed DNN models with various regression methods and a conventional fully connected multilayer DNN model. As a result, the proposed DNN models reduced the EH and EW error rates by 22.7 and 43.9% compared to the other regression methods. In addition, the proposed DNN models not only reduced the error rates by 22.0–28.4% but also reduced the computing cost by 8.0–9.4%, compared to the conventional DNN model. Moreover, we compared the proposed models with various DNN models having other preprocessing structures. By showing 26.7 and 28.8% lower EH and EW error rates than the other DNN models, we validated that the proposed models properly consider the most dominant design factors in preprocessing.

Deep neural network modeling of unknown partial differential equations in nodal space

Industrial software technology: R Mitchell (ed) Peter Peregrinus Ltd (on behalf of the Institution of Electrical Engineers), London, UK (1987) 289pp £37.00

Traditionally Deep Neural Networks (DNNs) services are deployed in the cloud, due to the computation-intensive DNN models. In recent years, as emerging edge computing provides new possibilities for DNN applications, we have opportunities to process DNN models in the cloud and on the device collaboratively, i.e., edge-cloud computing. Since cloud and edge devices demonstrate significant diversity on inference latency, network transmission overhead, memory capacity and power consumption, it is a big challenge to determine the DNN model deployment in the cloud and on edge devices. In this paper, we characterize the behaviours of three types of DNN models, i.e., CNN, LSTM and MLP, on four types of platforms, i.e., server-class CPU, server-class GPU, embedded device with GPU, and smart-phones. Our experimental results demonstrate that we can carefully tune a deployment strategy for DNN models in the cloud, and on big and (or) little cores of the edge device, to balance performance and power consumption.

Artificial Intelligence (AI) in healthcare enables predicting diabetes using data-driven methods instead of the traditional ways of screening the disease, which include hemoglobin A1c (HbA1c), oral glucose tolerance test (OGTT), and fasting plasma glucose (FPG) screening techniques, which are invasive and limited in scale. Machine learning (ML) and deep neural network (DNN) models that use large datasets to learn the complex, nonlinear feature interactions, but the conventional ML algorithms are data sensitive and often show unstable predictive accuracy. Conversely, DNN models are more robust, though the ability to reach a high accuracy rate consistently on heterogeneous datasets is still an open challenge. For predicting diabetes, this work proposed a hybrid DNN approach by integrating a bidirectional long short-term memory (BiLSTM) network with a bidirectional gated recurrent unit (BiGRU). A robust DL model, developed by combining various datasets with weighted coefficients, dense operations in the connection of deep layers, and the output aggregation using batch normalization and dropout functions to avoid overfitting. The goal of this hybrid model is better generalization and consistency among various datasets, which facilitates the effective management and early intervention. The proposed DNN model exhibits an excellent predictive performance as compared to the state-of-the-art and baseline ML and DNN models for diabetes prediction tasks. The robust performance indicates the possible usefulness of DL-based models in the development of disease prediction in healthcare and other areas that demand high-quality analytics.

Long-term prediction for railway track geometry based on an optimised DNN method

It is a challenging task to resist illegal usage of Deep Neural Network (DNN) models in applications from edge computing. The existed protection method is developed based on encrypting all weights of DNN models and has achieved a promising result, which however suffers from a high computation cost. In this paper, we design a critical-weight based method to lock the DNN model to defend unauthorized usage, leading to a significant decrease in the time cost. To be specific, we analyse and figure out the critical weights of a DNN model, and then encrypt the critical weights to lock the DNN model. A set of preliminary experiments are conducted to testify the effectiveness of the proposed approach.

Objective. Epidermal growth factor receptor (EGFR) mutation genotyping plays a pivotal role in targeted therapy for non-small cell lung cancer (NSCLC). We aimed to develop a computed tomography (CT) image-based hybrid deep radiomics model to predict EGFR mutation status in NSCLC and investigate the correlations between deep image and quantitative radiomics features. Approach. First, we retrospectively enrolled 818 patients from our centre and 131 patients from The Cancer Imaging Archive database to establish a training cohort (N = 654), an independent internal validation cohort (N = 164) and an external validation cohort (N = 131). Second, to predict EGFR mutation status, we developed three CT image-based models, namely, a multi-task deep neural network (DNN), a radiomics model and a feature fusion model. Third, we proposed a hybrid loss function to train the DNN model. Finally, to evaluate the model performance, we computed the areas under the receiver operating characteristic curves (AUCs) and decision curve analysis curves of the models. Main results. For the two validation cohorts, the feature fusion model achieved AUC values of 0.86 ± 0.03 and 0.80 ± 0.05, which were significantly higher than those of the single-task DNN and radiomics models (all P < 0.05). There was no significant difference between the feature fusion and the multi-task DNN models (P > 0.8). The binary prediction scores showed excellent prognostic value in predicting disease-free survival (P = 0.02) and overall survival (P < 0.005) for validation cohort 2. Significance. The results demonstrate that (1) the feature fusion and multi-task DNN models achieve significantly higher performance than that of the conventional radiomics and single-task DNN models, (2) the feature fusion model can decode the imaging phenotypes representing NSCLC heterogeneity related to both EGFR mutation and patient NSCLC prognosis, and (3) high correlations exist between some deep image and radiomics features.

Dynamic properties, such as shear modulus and damping ratio, are critical for civil engineering applications and essential for accurate dynamic response analysis. This study introduces a novel Deep Neural Network (DNN) approach to predict the normalized shear modulus (G/Gmax ) and damping ratio (D) of granular soils over a wide strain range. Utilising a comprehensive dataset from cyclic triaxial (CT) and resonant column (RC) tests, we developed a Deep Feed-Forward Neural Network (DFFNN) model. The model incorporates grading characteristics, shear strain, void ratio, mean effective confining pressure, consolidation stress ratio, and specimen preparation method as inputs. The DFFNN demonstrated high accuracy with testing results of 0.9830 for G/Gmax and 0.9396 for D, outperforming traditional empirical models and other intelligent techniques such as Shallow Neural Network (SNN), Support Vector Regression (SVR), and Gradient Boosting Regression (GBR). This data-driven approach offers a robust and adaptable method for predicting the dynamic properties of granular soils across diverse conditions.

Distant speech recognition (DSR) remains to be an open challenge, even for the state-of-the-art deep neural network (DNN) models. Previous work has attempted to improve DNNs under constantly distant speech. However, in real applications, the speaker-microphone distance (SMD) can be quite dynamic, varying even within a single utterance. This paper investigates how to alleviate the impact of dynamic SMD on DNN models. Our solution is to incorporate the frame-level SMD information into DNN training. Generation of the SMD information relies on a universal extractor that is learned on a meeting corpus. We study the utility of different architectures in instantiating the SMD extractor. On our target acoustic modeling task, two approaches are proposed to build distance-aware DNN models using the SMD information: simple concatenation and distance adaptive training (DAT). Our experiments show that in the simplest case, incorporating the SMD descriptors improves word error rates of DNNs by 5.6% relative. Further optimizing SMD extraction and integration results in more gains.