An Ahead-of-Time Compiler System for the IoT-Cloud Virtual Machine

The development and use of Internet of Things (IoT) devices have grown significantly in recent years. Advanced IoT device characteristics are mainly to blame for the wide range of applications that may now be achieved with IoT devices. Corporations have begun to embrace the IoT concept. Identifying true and suitable devices, security faults that might be used for bad reasons, and administration of such devices are only a few of the issues that IoT, a new concept in technological progress, provides. In some ways, IoT device traffic differs from regular device traffic. Devices with particular features can be classified into categories, irrespective of their function or performance. Ever-changing and complex environments, like a smart home, demand this classification scheme. A total of 41 IoT devices were employed in this investigation. To build a multiclass classification model, IoT devices contributed 13 network traffic parameters. To further preprocess the raw data received, preprocessing techniques like Normalization and Dataset Scaling were utilized. Feature engineering techniques can extract features from the text data. A total of 117,423 feature vectors are contained in the dataset after stratification, which are used to further improve the classification model. In this study, a variety of performance indicators were employed to show the performance of the logiboosted algorithms. Logi-XGB scored 80.2% accuracy following application of the logit-boosted algorithms to the dataset for classification, whereas Logi-GBC achieved 77.8% accuracy. Meanwhile, Logi-ABC attained 80.7% accuracy. Logi-CBC, on the other hand, received the highest Accuracy score of 85.6%. The accuracy of Logi-LGBM and Logi-HGBC was the same at 81.37% each. Our suggested Logi-CBC showed the highest accuracy on the dataset when compared to existing Logit-Boosted Algorithms used in earlier studies.

Just-in-time (JIT) compilation during program execution and ahead-of-time (AOT) compilation during software installation are alternate techniques used by managed language virtual machines (VM) to generate optimized native code while simultaneously achieving binary code portability and high execution performance. Profile data collected by JIT compilers at run-time can enable profile-guided optimizations (PGO) to customize the generated native code to different program inputs. AOT compilation removes the speed and energy overhead of online profile collection and dynamic compilation, but may not be able to achieve the quality and performance of customized native code. The goal of this work is to investigate and quantify the implications of the AOT compilation model on the quality of the generated native code for current VMs. First, we quantify the quality of native code generated by the two compilation models for a state-of-the-art (HotSpot) Java VM. Second, we determine how the amount of profile data collected affects the quality of generated code. Third, we develop a mechanism to determine the accuracy or similarity for different profile data for a given program run, and investigate how the accuracy of profile data affects its ability to effectively guide PGOs. Finally, we categorize the profile data types in our VM and explore the contribution of each such category to performance.

<abstract> <p>With the widespread use of Internet, Internet of Things (IoT) devices have exponentially increased. These devices become vulnerable to malware attacks with the enormous amount of data on IoT devices; as a result, malware detection becomes a major problem in IoT devices. A reliable and effective mechanism is essential for malware detection. In recent years, research workers have developed various techniques for the complex detection of malware, but accurate detection continues to be a problem. Ransomware attacks pose major security risks to corporate and personal information and data. The owners of computer-based resources can be influenced by monetary losses, reputational damage, and privacy and verification violations due to successful assaults of ransomware. Therefore, there is a need to swiftly and accurately detect the ransomware. With this motivation, the study designs an Ebola optimization search algorithm for enhanced deep learning-based ransomware detection (EBSAEDL-RD) technique in IoT security. The purpose of the EBSAEDL-RD method is to recognize and classify the ransomware to achieve security in the IoT platform. To accomplish this, the EBSAEDL-RD technique employs min-max normalization to scale the input data into a useful format. Also, the EBSAEDL-RD technique makes use of the EBSA technique to select an optimum set of features. Meanwhile, the classification of ransomware takes place using the bidirectional gated recurrent unit (BiGRU) model. Then, the sparrow search algorithm (SSA) can be applied for optimum hyperparameter selection of the BiGRU model. The wide-ranging experiments of the EBSAEDL-RD approach are performed on benchmark data. The obtained results highlighted that the EBSAEDL-RD algorithm reaches better performance over other models on IoT security.</p> </abstract>

The Internet of Things (IoT) devices is able to communicate with another IoT devices in heterogeneous environments. They are also able to create a network by their own using wireless capabilities without a centralized approach. This network is called wireless mobile ad hoc network (MANET). The MANET facilitate IoT devices to communicate with each other in an infrastructure less network of the Internet of Things environment. The IoT devices can dynamically join, create connection and exchange information among them. The role of cloud in this framework is to store and process the data by IoT devices. The communication Security has been raised as one of the most critical issues of cloud computing where resolving such an issue would result in a constant growth in the use and popularity of cloud. Our purpose of this study is to create a framework for providing the communication in an integrated framework of Cloud and MANET among IoT devices. Our main contribution links a new study that integrates cloud computing to the MANET and provides communication to the internet of things. This study can be used in the framework of the Internet of Things in future.

The Internet of Things (IoT) has had a considerable influence on our daily lives by enabling enhanced connection of devices, systems, and services that extends beyond machine-to-machine interactions and encompasses a wide range of protocols, domains, and applications. However, despite privacy concerns shown by IoT users, little has been done to reduce and protect individual information exposure. It is extremely difficult to mitigate IoT devices from reidentification threats which is why it is still a major challenge for IoT users to securely protect their information. The trust controls how we regulate privacy in our IoT platforms in the same way that it governs personal relationships. As IoT devices become increasingly linked, more data is shared across individuals, businesses, governments, and ecosystems. Technologies, sensors, machines, data, and cloud connections all rely largely on trust relationships that have been formed. With the rapid growth of additional types of IoT devices that are being introduced, it, therefore, expands privacy concerns and is difficult to develop trust with an IoT system or device without the option to regulate information privacy settings. Privacy has always been a barrier for many devices as they race for the early adoption of IoT technologies. Several Internet of Things devices or systems will continue to pose privacy threats. As a result, the main objective of this study was to examine the individual understanding of privacy and to promote information privacy protection awareness not only to IoT users but also to organizations that use IoT devices or platforms to run their day-to-day business operations. Furthermore, the objective extends to compare user knowledge and concerns about IoT privacy, as well as to identify any common attitudes and variances. However, in terms of enhancing individuals’ knowledge, an artifact was developed to educate and enhance information privacy awareness among IoT users. A pre- and postquestionnaire was generated to test and validate user knowledge regarding information privacy protection in IoT. The study was conducted using a quantitative research method. Findings indicate that IoT users’ awareness of information privacy protection turned out to be average, suggesting a need for education and awareness. Several participants stated that information privacy protection awareness is required within the community to educate, raise awareness, eliminate human error, and enable individuals to be conscious of their privacy when surfing the Internet.

ABSTRACTIn recent years, the emerging development of Internet of things (IoT) has created new opportunities for IoT service provider, device manufacturer and customer (end user). In agriculture, employing IoT can help reducing manpower as well as standardizing agricultural processes, thus increasing the benefit for customer who does agricultural business. Beside the opportunities, there are also issues while doing maintenance for an agricultural IoT system. One of them is how to automate the process to detect faults of IoT devices in a large deployment area. While previous studies focus on investigating algorithms as well as theoretical model to detect faults for specific IoT devices, automatically expanding of IoT management process for detecting faults of sensor/actuator has not been investigated yet. To achieve this, we should be able to deal with the relationship between IoT device manufacturer, service provider and customer. In this study, we conceptualize the knowledge of IoT devices, management process and fault detection requirement. To realize this model, we introduce a runtime system to expand the IoT management process for detecting sensor/actuator faults which is able to provide the above features. We do several experiments to show the effectiveness and usefulness of the proposed solution.

Seeing is not always believing: Insights on IoT manufacturing from firmware composition analysis and vendor survey

With the advancement in science and technology, the demand for electronic Internet of Things (IoT) devices has increased to store and process digital data. With the advancement in IoT technology, we are more reliant on IoT devices to perform our regular tasks. IoT Forensics deals with the investigation of IoT devices such as smartphones, tablets, smart watches, or any device which is connected to the Internet. The data on these devices can still be retrieved via IoT forensics even if they are destroyed, resold, or misplaced. Before discarding any IoT device, we must consider how to secure the data stored on them. We are then going to discuss the several types of personal data that could be retrieved from discarded IoT devices. Finally, we are going to discuss the protection measures for the safe disposal of IoT devices.

Internet of Things (IoT) is an emerging technology that consists of tiny sensors embedded with IoT devices used in e-Health, smart cities and assisted living. IoT devices are equipped with constrained power, memory, and computing capabilities, which creates new security challenges. By integrating sensors and wireless technologies, this cutting-edge technology automates numerous routine tasks in different domains. The main goal of advancing IoT in the existing healthcare system is to automate the monitoring of hospitals and patients’ health by spreading goodwill toward the IoT vision. IoT has gained popularity on practically all platforms that are available. This paper presents a remote patient health monitoring and diagnosis system that uses Message Queuing Telemetry Transport protocol (MQTT) and Internet of Things (IoT) devices with one time pad cryptography. The proposed plan offers end-to-end data secrecy for an IoT system using MQTT that enables e-health and mobility. Patients’ movements inside nursing homes and healthcare facilities are also managed safely without the need for periodic reconfigurations. Prior to communicating through the MQTT protocol, this secure crypto scheme encrypts the message on both the publisher and subscriber ends. According to the results, the proposed scheme is more efficient than delegation-based architecture in terms of security and lightweight communication. The proposed system established communication between patients and medical experts using IoT technologies to alleviate the hospital strain caused by congestion in medical treatment and enable an expressway of medical responses. According to our results the proposed scheme has low computational overhead compared to other solutions that use conventional encryption to guarantee robust protection against most of the IoT security attacks.

The number of Internet of Things (IoT) devices has increased recently and will increase further in the future. IoT devices are vulnerable, so vendors update and distribute firmware. At the time of firmware distribution, a huge number of IoT devices may connect to the firmware server and excessive network traffic may occur. Consequently, a method using a peer-to-peer file sharing system and a blockchain has been proposed. One study proposed an update scheme considering incentives for distributors to help with updating. However, this method requires the IoT devices, which have limited processing power, to decrypt encrypted files, and the distribution nodes to pay the transaction cost. This paper proposes a firmware distribution method that provides incentives for distributors to help with distribution to reduce the gas costs, using a smart contract and access control based on update records. The additional computations performed by IoT devices and distributors key management were reduced compared to those in previous studies by using access control instead of encryption. Further, the proposed approach was implemented and evaluated using a Raspberry Pi and laptop. The evaluation demonstrated that the gas cost per update was successfully lowered compared to the costs in previous studies.

As location-aware IoT (Internet of Things) devices intend to spread across almost every application, IoT devices are going to require different GNSS (Global Navigation Satellite System) receiver design requirements. To deliver on IoT opportunities, system architects and designers need to look carefully at every aspect of system design and architecture to be able to enable the full potential of the IoT era. IoT devices are equipped with different connectivity sensors that can provide a reliable integrated location-awareness solution. IoT devices are mainly relying on GNSS chip to deliver a service when no other RF signal is available. Hence, GNSS chip is expected to maintain a robust and reliable performance even in harsh environment. The harsh environment includes multipath environment, NLOS (Non-Line of Sight) GNSS signal reception, weak GNSS signal power reception, superimposed motion (e.g., arm swing, floating platform fluctuation …etc.), operation under freezing temperature, and interference. The targeted low-cost system design along with the expected harsh operational environment derived us to face exceptional GNSS signal reception condition. This paper discusses lessons learned, and challenges faced signal acquisition, reacquisition, and tracking for several IoT applications. Different operational modes are also explored to accommodate various use cases scenarios for several IoT applications. These different power consumption operational modes allow the GNSS chip to achieve an Ultra-low power consumption which indeed required for IoT applications. This paper provides an overview about the addressed GNSS chip fabricated in a 28nm FD-SOI process. We demonstrate a system performance and power consumption comparison of this chip along with other state-of-the-art GNSS chip. We compare the positioning performance for this device alongside another state-of-the-art GNSS modules and Novatel’s tightly coupled GNSS/INS (Inertial Navigation System) reference solution at numerous scenarios ranging from walking, running, and driving at several sites under different environment.

Research Article| March 01, 2016 The Internet of Geophysical Things: Raspberry Pi Enhanced REF TEK (RaPiER) System Integration and Evaluation Frank Sepulveda; Frank Sepulveda aDepartment of Geology, Baylor University, One Bear Place #97354, Waco, Texas 76798 U.S.A.frank_sepulveda@baylor.edu Search for other works by this author on: GSW Google Scholar Jay Pulliam Jay Pulliam aDepartment of Geology, Baylor University, One Bear Place #97354, Waco, Texas 76798 U.S.A.frank_sepulveda@baylor.edu Search for other works by this author on: GSW Google Scholar Author and Article Information Frank Sepulveda aDepartment of Geology, Baylor University, One Bear Place #97354, Waco, Texas 76798 U.S.A.frank_sepulveda@baylor.edu Jay Pulliam aDepartment of Geology, Baylor University, One Bear Place #97354, Waco, Texas 76798 U.S.A.frank_sepulveda@baylor.edu Publisher: Seismological Society of America First Online: 14 Jul 2017 Online Issn: 1938-2057 Print Issn: 0895-0695 © 2016 by the Seismological Society of America Seismological Research Letters (2016) 87 (2A): 345–357. https://doi.org/10.1785/0220150234 Article history First Online: 14 Jul 2017 Cite View This Citation Add to Citation Manager Share Icon Share Facebook Twitter LinkedIn MailTo Tools Icon Tools Get Permissions Search Site Citation Frank Sepulveda, Jay Pulliam; The Internet of Geophysical Things: Raspberry Pi Enhanced REF TEK (RaPiER) System Integration and Evaluation. Seismological Research Letters 2016;; 87 (2A): 345–357. doi: https://doi.org/10.1785/0220150234 Download citation file: Ris (Zotero) Refmanager EasyBib Bookends Mendeley Papers EndNote RefWorks BibTex toolbar search Search Dropdown Menu toolbar search search input Search input auto suggest filter your search All ContentBy SocietySeismological Research Letters Search Advanced Search ABSTRACT The proliferation of commercial Internet of Things (IoT) devices is raising consumers’ awareness of the benefits of enhancing everyday objects with the ability to communicate, sense, and process information. Commercial‐off‐the‐shelf (COTS) versions of the embedded technologies responsible for the rise of the IoT are easy‐to‐use, inexpensive, and relatively powerful. IoT Makers, technological do‐it‐yourself enthusiasts, utilize these technologies and the IoT ecosystem to create IoT devices that range from casual hobbyist to entrepreneurial in nature.In an effort to develop a “no‐engineer‐needed” Internet of Geophysical Things (IoGT) device, we integrated a COTS embedded computer with a geoscience‐related COTS data acquisition system (DAS). Using skills common to geoscientists, we integrated the Raspberry Pi System‐On‐Chip with the REF TEK (a Trimble brand) 130‐01 DAS. This Raspberry Pi enhanced REF TEK (RaPiER) provides IoGT Makers a platform for the development of geoscientific sensor node or network enhancements. IoGT Makers can use the RaPiER to tinker with IoT capabilities while simultaneously acquiring research‐quality data. Geoscientific (i.e., seismic) application areas that may benefit from RaPiER, particularly RaPiER nodal processing, include earthquake and engineering seismology.In this article, we discuss the emerging technologies that allow IoGT Makers to build their own IoGT device. We review our selection of the Raspberry Pi and REF TEK 130‐01 for IoGT device integration. We provide a RaPiER system integration guide and REF TEK interface software compiled for the Raspberry Pi ( available in the electronic supplement to this article). We present methods to expand RaPiER capabilities using the Raspberry Pi’s ecosystem. Last, we discuss our evaluation of RaPiER’s performance and its suitability for realistic field deployments. You do not have access to this content, please speak to your institutional administrator if you feel you should have access.

Usually, IoT devices are designed to perform specific tasks, while robots have to adapt to unpredictable situations. Artificial intelligence and machine learning help these robots cope with the emerging unexpected conditions. The Internet of Robotic Things is an evolving concept that brings together all-encompassing sensors and devices with robotic and autonomous systems. Both IoT devices and robots rely on sensors to understand the surrounding environment, to process data quickly, and to decide how to respond. Nevertheless, while most IoT systems can handle only well-defined tasks, robots can handle expected situations as well. The Internet of Robotic Things is a better Internet of Things (IoT) solution due to its ability to bridge the gap between IT and real operations. The IoRT may face several challenges in power consumption and network bandwidth limitation due to the growth in the information dissemination over the Robotic network. The main objective of this paper is to introduce an overview of the concepts and challenges in the Internet of Robotic Things based on Fog Computing technique. Further, a framework of Fog based IoRT is introduced.

In opportunistic networks the communication opportunities (contacts) are intermittent and there is no need to establish an end-to-end link between the communication nodes. The enormous growth of devices having access to the Internet, along the vast evolution of the Internet and the connectivity of objects and devices, has evolved as Internet of Things (IoT). There are different issues for these networks. One of them is the selection of IoT devices in order to carry out a task in opportunistic networks. In this work, we implement a Fuzzy-Based System for IoT device selection in opportunistic networks. For our system, we use four input parameters: IoT Device’s Number of Past Encounters (IDNPE), IoT Contact Duration (IDCD), IoT Device Storage (IDST) and IoT Device Remaining Energy (IDRE). The output parameter is IoT Device Selection Decision (IDSD). The simulation results show that the proposed system makes a proper selection decision of IoT devices in opportunistic networks. The IoT device selection is increased up to 15% and 27% by increasing IDNPE and IDRE, respectively.

The deployment of a client–server-based distributed intelligent system involves application development in both the network domain and the device domain. In the network domain, an application server (typically in the cloud) is deployed to execute the network applications. In the device domain, several Internet of Things (IoT) devices may be configured as, for example, wireless sensor networks (WSNs), and interact with each other through the application server. Developing the network and the device applications are tedious tasks that are the major costs for building a distributed intelligent system. To resolve this issue, a low-code or no-code (LCNC) approach has been purposed to automate code generation. As traditional LCNC solutions are highly generic, they tend to generate excess code and instructions, which will lack efficiency in terms of storage and processing. Fortunately, optimization of automated code generation can be achieved for IoT by taking advantage of the IoT characteristics. An IoT-based distributed intelligent system consists of the device domain (IoT devices) and the network domain (IoT server). The software of an IoT device in the device domain consists of the Device Application (DA) and the Sensor Application (SA). Most IoT LCNC approaches provide code generation in the network domain. Very few approaches automatically generate the DA code. To our knowledge, no approach supports the SA code generation. In this paper, we propose DeviceTalk, an LCNC environment for the DA and the SA code development. DeviceTalk automatically generates the code for IoT devices to speed up the software development in the device domain for a distributed intelligent system. We propose the DeviceTalk architecture, design and implementation of the code generation mechanism for the IoT devices. Then, we show how a developer can use the DeviceTalk Graphical User Interface (GUI) to exercise LCNC development of the device software.