An Approach to Force Control by Model Predictive Velocity Control with Constraints

This paper presents a model predictive voltage control method for single-inductor multiple-output (SIMO) DC/DC converters operating in the continuous conduction mode (CCM). The state-space model for a SIMO DC/DC converter system is formulated and a Model Predictive Control (MPC) strategy, which has the capability to track the reference voltage automatically and reduce the impact of cross regulation problem, is proposed to regulate the system. Considering that the switches in the converter only have ON/OFF modes, the quadratic programming algorithm is employed to obtain the MPC's solution. Simulation studies are conducted in MATLAB/Simulink to verify the performance of the proposed method.

This letter presents a novel model predictive control strategy without involving any proportional-integral-differential regulators for practical renewable energy based ac microgrids. The proposed method consists of a model predictive power control (MPPC) scheme and a model predictive voltage control (MPVC) scheme. By controlling the bidirectional buck-boost converters of the battery energy storage systems based on the MPPC algorithm, the fluctuating output from the renewable energy sources can be smoothed, while stable dc-bus voltages can be maintained as the inverters' inputs. Then, the parallel inverters are controlled by using a combination of the MPVC scheme and the droop method to ensure stable ac voltage output and proper power sharing. Compared with the traditional cascade control, the proposed method is simpler and shows better performance, which is validated in simulation on MATLAB/Simulink and on real-time laboratory platform.

This paper proposes an improved constrained networked model predictive tracking control design for the chamber pressure of a coke furnace under uncertainty and packet losses. Unlike conventional constrained model predictive control (MPC) strategies that have a limitation in the consideration of both set-point tracking and the dynamic process responses, the system state variables and output tracking errors are combined and thus can be regulated simultaneously in the new MPC scheme. Based on such advantages, there are more degrees of freedom for the subsequent controller design and improved system performance can then be obtained. Case studies on the regulation of chamber pressure of a coke furnace under process uncertainties and packet losses are investigated to verify the proposed approach in comparison with typical traditional constrained MPC schemes.

Multi-vector model predictive control of permanent magnet synchronous motor can effectively overcome the shortcomings of conventional single-vector model predictive control such as large motor current ripples and limited control accuracy, but its control performance is more susceptible to the influence of motor parameter perturbation. To improve the robustness of the multi-vector predictive control algorithm under the motor parameter perturbation, a novel nonparametric three-vector model predictive current control method for permanent magnet synchronous motors is proposed in this paper. Through constructing an ultra-local predictive current model based on the input and output signals of the permanent magnet synchronous motor, the influence of motor parameter perturbation on current prediction is avoided, and a disturbance observer is designed to estimate the non-modeled and perturbed parts of the ultra-local model. In addition, the direct calculation method of vector duty cycles based on current error is introduced to suppress the influence of motor parameter uncertainty on the duty cycle calculation link, which further improves the system robustness. Finally, simulations and experiments of the proposed method are demonstrated to compare with the conventional parametric three-vector model predictive current control, and the results show that the proposed control strategy can effectively suppress the disturbances caused by the motor parameters and ensure the steady-state performance during motor operation.

Model predictive control (MPC) as a nonlinear control method, is being studied for a wide variety of power electronics applications targeting various power ranges. The fast dynamic response, robustness under different load conditions, multi-objective control, and simplicity of implementation are the main features of MPC. However, the implementation of finite control set MPC (FCS-MPC) or direct MPC in its basic form for multilevel converters (MLCs) demonstrates the inability to generate the staircase multilevel output voltage waveform in a voltage sourced inverter (VSI) application. Adding a reference evaluation block to the basic FCS-MPC method can significantly improve its multilevel voltage generation capability. In this paper, an enhanced model predictive nearest level control (EMP-NLC) is proposed and implemented on a 5-Level flying capacitor multilevel converter (FCMC). The proposed method is simulated under different load conditions, while a comparison against existing MPC techniques is also presented. Experimental results verified the efficacy of the proposed controller.

Model predictive control (MPC) presents important advantages in the control of the power converter and drives such as, fast dynamic response and capability to include nonlinear constrains. These have positioned MPC as a powerful and realistic control strategy, however, it also has disadvantages such as variable switching frequency and parameter sensitivity. This paper applied a modulated model predictive speed control that guarantees a fix switching frequency and, thanks to disturbance compensation, robustness to parameters variation. The strategy is validated and compared to finite set model predictive speed control through simulation results.

This study proposes a model predictive stator current control (MPSCC) strategy of doubly fed induction generator (DFIG) under unbalanced grid voltage conditions. Sinusoidal and balanced stator currents injected into the power grid can be ensured due to the direct control of stator currents rather than rotor currents. Model predictive control instead of traditional vector control is adopted, which can increase the current loop bandwidth and obtain faster dynamic responses. Conventional resonant regulators such as second‐order generalised integrators or second‐order vector integrators that are usually used to eliminate unbalanced components in stator currents can also be avoided. Moreover, both extractions of negative sequence components in rotor or stator currents and calculation of commanded rotor current are avoided, which simplifies the control scheme. The proposed MPSCC strategy can also implement the grid connection by introducing the virtual stator currents without any changes in the control scheme. Finally, experimental results based on a 1 kW lab DFIG system are provided to validate the effectiveness of the proposed control strategy.

Energy efficient model predictive building temperature control

In this paper, a “third generation” benchmark problem that focuses on the control of wind excited response of a tall building, using the Model Predictive Control (MPC) scheme, is presented. A 76 story, 306 m tall concrete office tower proposed for the city of Melbourne, Australia, is being used to demonstrate the effectiveness of MPC. The MPC scheme is based on an explicit use of a prediction model of the system response to obtain the control actions by minimizing an objective function. Optimization objectives in MPC include minimization of the difference between the predicted and desired response trajectories, and the control effort subjected to prescribed constraints. By incorporating input/output hard constraints, the MPC scheme provides an optimal control force that satisfies the prescribed constraints.

Modeling and model predictive control of the BioPower combined heat and power (CHP) plant

Model predictive control offers high-performance regulation for multiphase drives but is critically dependent on the accuracy of mathematical models for prediction, making it vulnerable to parameter mismatches and uncertainties. To achieve parameter-independent control across both healthy and faulty operations, this paper proposes a novel dynamic mode decomposition with control (DMDc)-based model predictive current control (MPCC) scheme for five-phase permanent magnet synchronous motors. The core innovation lies in constructing discrete-time state-space models directly from operational data via the open-loop DMDc identification, completely eliminating reliance on explicit motor parameters. Furthermore, an improved fault-tolerant strategy is developed to mitigate the torque ripple induced by inter-turn short-circuit (ITSC) faults. This strategy estimates the key fault characteristic, the product of the short-circuit ratio and current, through a spectral decomposition of the AC component in the q-axis current variations, bypassing the need for complex parameter-dependent observers. The derived compensation currents are seamlessly integrated into the predictive control loop. Experimental results comprehensively validate the effectiveness of the proposed framework, demonstrating a performance comparable to a conventional MPCC under healthy conditions and a significant reduction in torque ripple under ITSC fault conditions, all achieved without any prior knowledge of motor parameters or the retuning of controller gains.

The need for cost-effective fuel economy improvements has driven the introduction of automatic transmissions with an increasing number of gear ratios. Incorporation of interlocking dog clutches in these transmissions decreases package space and increases efficiency, as compared to conventional dry or wet clutches. Unlike friction based clutches, interlocking dog clutches require very precise rotational speed matching prior to engagement. Precise engine speed control is therefore critical to maintaining high shift quality. This research focuses on controlling the engine speed during a gearshift period by manipulating throttle position and combustion phasing. Model predictive control (MPC) is advantageous in this application since the speed profile of a future prediction horizon is known with relatively high confidence. The MPC can find the optimal control actions to achieve the designated speed target without invoking unnecessary actuator manipulation and violating hardware and combustion constraints. This research utilizes linear parameter varying (LPV) MPC to control the engine speed during the gearshift period. Combustion stability constraints are considered with a control oriented covariance of indicated mean effective pressure model (COV of IMEP). The proposed MPC engine speed controller is validated with a high-fidelity 0-dimensional engine model with crank angle resolution. Four case studies, based on simulation, investigate the impact of different MPC design parameters. They also demonstrate that the proposed MPC engine controller successfully achieves the speed reference tracking objective while considering combustion variation constraints.

Fifty-seven per cent of all water supply systems in the Netherlands are controlled by model predictive flow control; the other 43% are controlled by conventional level-based flow control. The differences between conventional level-based flow control and model predictive control were investigated in experiments at five full-scale water supply systems in the first half of 2011. Quality parameters of the drinking water and energy consumption of the treatment and distribution processes were measured and analysed. The experiments showed that the turbidity values are 12–28% lower, and particle volume values 12–42% lower for the systems which are controlled by model predictive flow control. The overall energy consumption of water supply systems controlled by predictive flow control is 1.0–5.3% lower than conventional level-based flow controlled systems, and the overall energy costs are 1.7–7.4% lower.

A model predictive control for a multi-chiller system in data center considering whole system energy conservation

Model predictive control (MPC) is an efficient and growing approach to power converter control. This paper proposes an improved and simplified model predictive current control (MPCC) technique for a four-level nested neutral point clamped (4L-NNPC) converter. Conventional MPCC exhibits better performances as compared to the conventional linear control system such as fast dynamic response, consideration of the system constraints, and nonlinearities. However, the application of the conventional model predictive current control (MPCC) approach on complex systems provokes a significant number of calculations, which is the main hurdle to its practical implementation. To fix this flaw, this paper proposes an effective algorithm to shorten the execution time of the conventional MPCC. In this proposed technique, 216 current predictions of the conventional MPCC are skipped and converted into one required voltage vector (RVV) prediction. With this equivalent reference voltage transformation, the calculation burden of MPCC is significantly reduced, while the output performance is not influenced. The results of the simplified MPCC for the 4L-NNPC converter are analyzed and compared with the conventional MPCC. The computational time is reduced by 19.56% using the simplified MPCC, while keeping an approximately similar error of output currents. The switching frequency and total harmonic distortion (THD) of the proposed method are reduced by 8.16% and 0.07%, respectively, as compared to the conventional technique. These results demonstrate the fact that that the performance of a conventional MPCC is enhanced with the proposed MPCC. The proposed algorithm can be applied to several inverter topologies.