An Approach to Use Comic Strips To Support IoT Systems Requirements Engineering

This paper presents the design and development of low-cost Internet of Things (IoT) system for remote monitoring of agriculture ecosystem. The aims of the research are to evaluate the accuracy and reliability of data collected and transmitted with developed IoT system and access from remote location. These data are then compared with the readings of the conventional stand-alone sensors or meters. The system is set in the laboratory and utilises low cost microcontroller, sensors, Wi-Fi network communication, cloud storage, mobile and web application. Microcontroller Arduino Uno ATMega328P is used with ESP8266 Wi-Fi module to enable the device to be connected to the Internet. The sensors used in this system are selected base on the plant’s growth factor. All data collected from the sensors are sent to the Cloud platform such as ThingSpeak and Blynk. Periodical monitoring is carried out on laptop and mobile phone. The results showed that the data taken from the soil moisture, soil temperature, light intensity, surrounding temperature and humidity are accurate and reliable.

Context: Internet of Things (IoT) has become an important kind of distributed systems thanks to the wide-spread of cheap embedded devices equipped with different networking technologies. Although ubiquitous, developing IoT systems remains challenging. Inquiry: A recent field study with 194 IoT developers identifies debugging as one of the main challenges faced when developing IoT systems. This comes from the lack of debugging tools taking into account the unique properties of IoT systems such as non-deterministic data, and hardware restricted devices. On the one hand, offline debuggers allow developers to analyse post-failure recorded program information, but impose too much overhead on the devices while generating such information. Furthermore, the analysis process is also time-consuming and might miss contextual information relevant to find the root cause of bugs. On the other hand, online debuggers do allow debugging a program upon a failure while providing contextual information (e.g., stack trace). In particular, remote online debuggers enable debugging of devices without physical access to them. However, they experience debugging interference due to network delays which complicates bug reproducibility, and have limited support for dynamic software updates on remote devices. Approach: This paper proposes out-of-things debugging, an online debugging approach especially designed for IoT systems. The debugger is always-on as it ensures constant availability to for instance debug post-deployment situations. Upon a failure or breakpoint, out-of-things debugging moves the state of a deployed application to the developer's machine. Developers can then debug the application locally by applying operations (e.g., step commands) to the retrieved state. Once debugging is finished, developers can commit bug fixes to the device through live update capabilities. Finally, by means of a fine-grained flexible interface for accessing remote resources, developers have full control over the debugging overhead imposed on the device, and the access to device hardware resources (e.g., sensors) needed during local debugging. Knowledge: Out-of-things debugging maintains good properties of remote debugging as it does not require physical access to the device to debug it, while reducing debugging interference since there are no network delays on operations (e.g., stepping) issued on the debugger since those happen locally. Furthermore, device resources are only accessed when requested by the user which further mitigates overhead and opens avenues for mocking or simulation of non-accessed resources. Grounding: We implemented an out-of-things debugger as an extension to a WebAssembly Virtual Machine and benchmarked its suitability for IoT. In particular, we compared our solution to remote debugging alternatives based on metrics such as network overhead, memory usage, scalability, and usability in production settings. From the benchmarks, we conclude that our debugger exhibits competitive performance in addition to confining overhead without sacrificing debugging convenience and flexibility. Importance: Out-of-things debugging enables debugging of IoT systems by means of classical online operations (e.g., stepwise execution) while addressing IoT-specific concerns (e.g., hardware limitations). We show that having the debugger always-on does not have to come at cost of performance loss or increased overhead but instead can enforce a smooth-going and flexible debugging experience of IoT systems.

LoRaWAN based internet of things (IoT) system for precision irrigation in plasticulture fresh-market tomato

Herein, an Internet of Things (IoT) system with remote reconfigurable wireless sensor network (WSN) nodes is presented and its application to measure group work activity in a classroom is discussed. This IoT system consists of wiki pages, bots, (defined as remotely controlled devices), gateways, and remotely reconfigurable WSN Nodes. The bots/gateways and WSN nodes of the IoT system are controlled by scripts written on wiki pages that are read by the bot/gateways, which then forward the commands contained in the scripts to the WSN nodes. Each WSN node then executes the commands, obtains the resulting sensor values, and then returns those values to the bot/gateways. The bot/gateways relay the values and write them onto the wiki page. Each WSN node is flexible and reconfigurable because its behavior can be changed by the script commands written onto the wiki page. Using this IoT system, we created a measurement system to evaluate activity levels of group work in a classroom. After developing the measurement system, we found it was possible to adjust the sampling rate for obtaining sensor values simply by rewriting the script on the wiki page without directly manipulating the WSN.

Internet of Things (IoT) systems are characterized by being highly heterogeneous, distributed, and scalable, made up of a variety of devices that operate in uncertain and ubiquitous settings. In this sense, models@runtime emerges as a promising software development approach to address IoT systems’ intrinsic characteristics. This study presents a systematic review to know the state of the art using of models@runtime to support IoT systems’ operation. The methodology proposed by Kitchenham has been used to carry out this research. The systematic review answers the following research questions: i) How are models@runtime being used in the IoT domain? And ii) How is addressed the research in studies related to the use of models@runtime in the IoT domain? Initially, 692 primary studies were retrieved, where 50 relevant studies related to approaches based on models@runtime for IoT were selected after applying the corresponding inclusion and exclusion criteria. Those primary studies were classified based on the extraction criteria. Among review’s main results are that the models@runtime have been widely used to support the monitoring and self-adaptation mechanisms in IoT systems, as opposed to the few studies found aimed at interoperability, quality assurance, self-organization, and self-optimization of IoT systems, consisting of essential research opportunities.

Privacy preservation in blockchain based IoT systems: Integration issues, prospects, challenges, and future research directions

This chapter discusses the architecture of Internet of Things (IoT) systems. IoT system security takes a team of experts in network security, computer security, hardware and software security, cloud infrastructure security, secure protocols, and cryptography. The security of an IoT system is extremely complex and crosses many security disciplines. Various industries and standards groups have developed and proliferated system architectures in order to better communicate the issues and requirements relating to systems for which they are concerned. The Internet of Things community is no different from any other architectural community. The primary difference is that IoT spans many different industries and ecosystems, and has a diverse set of concerns. The cloud is essential to an IoT system because it houses centralized applications and contains the data model of the IoT system, making those applications accessible to its users wherever they are, and is wholly independent of the actual location of the IoT devices themselves.

PurposeThe purpose of this paper is to answer “Why do Chinese consumers use IOT systems?” and “Do consumers’ cognitive and affect experiences moderate the relationship between psychological perception factors and perceived usefulness?”Design/methodology/approachIn-depth interview with consumers and experts had been conducted and then the perceived psychological factors that influence perceived usefulness had been summarized. Based on a survey test of 337 smart home users, this study applies partial least squares technique analysis to test the research model.FindingsThe research results show that perceived psychological factors (perceived ease of use, perceived intelligence, perceived convenience and perceived privacy risk) have significant effect on the intention and behavior of IOT systems usage through perceived usefulness. Cognitive experience moderates the relationship between perceived ease of use and perceived usefulness, perceived privacy risk and perceived usefulness; affect experience moderates the relationship between perceived ease of use and perceived usefulness.Research limitations/implicationsThe current study mainly tested the antecedents of consumers’ usage of IOT systems, and the outcome of using the system was not investigated. Future research can examine the outcome (e.g. satisfaction, perceived value) by using the expectation-confirmation theory.Originality/valueThis study provides a useful insight into the key driving factors in consumers’ intention and behavior of using IOT systems. The previous studies over IOT systems have not observed consumers’ perception of IOT systems, but in fact IOT systems are being applied to more and more personal users.

A survey of trust computation models for service management in internet of things systems

This paper presents an implementation of a Wireless Internet of Things (IoT) system applied to the traction motor drive condition monitoring in electric vehicles (EVs). The design and testing of the prototype using an ESP8266 microcontroller module to acquire motor's vibration, current, and temperature information for the motor condition monitoring application is presented. This IoT system has been designed and developed from the ground up using commercially off-the-shelf components and open-source software platform for fast, reliable data acquisitions, low power consumption, and data gathered by the IoT system get reported to the cloud server in real time. The experimental results reveal that the IoT system is capable of capturing and reporting vital motor's parameters to cloud server and an automatic notification is sent to operators when motor's abnormality is detected in real time. Thanks to IoT technology, the preventive maintenance of traction motor can be effectively and remotely planned with rich data collection and analysis. With advanced power consumption reduction techniques, a sensor node consumes extremely low amount of battery power at which ideal for mobile applications.

With the advent of smart cities, the significance of the Internet of Things (IoT) is gaining greater prominence. At the same time, the safety early warning system in the IoT has a significant impact on real-time monitoring and the response to potential risks. Despite the advancements made in edge-assisted IoT deployments, several challenges and constraints persist. Given the potential threat to life posed by safety-related messages, ensuring the authenticity of messages in the edge-assisted IoT safety warning system is crucial. However, considering the identity privacy of devices participating in the edge-assisted Internet of Things system, directly verifying the identity of the sending device is undesirable. To address this issue, in this work, we design a linkable group signature scheme that allows devices to anonymously send safety-related messages to edge nodes, defending against Sybil attacks while ensuring the traceability of malicious device identities. Then, we present a high-efficiency conditional privacy-preserving authentication (CPPA) scheme based on the designed group signatures for the safety warning system in edge-assisted IoT. This scheme effectively protects device identity privacy while providing a reliable authentication mechanism to ensure the credibility and traceability of alert messages. The proposed scheme contributes to the field of safety warning systems in the context of edge-assisted IoT, providing a robust solution for privacy preservation and authentication.

Advanced digital signatures for preserving privacy and trust management in hierarchical heterogeneous IoT: Taxonomy, capabilities, and objectives

Wireless communication in Internet of Things (IoT) systems involves several devices communicating in the limited available frequency spectrum using different wireless communication standards. To achieve efficient spectrum usage in the IoT systems, it is desired to have the ability of dynamic spectrum allocation. Cognitive radios (CR) enable efficient spectrum utilization by performing spectrum sensing to gain the knowledge of current spectrum occupancy and dynamically reconfiguring the communication parameters, making them highly suitable for IoT systems. In this paper, we present the efficient hardware implementation of a spectrum sensing scheme for CR based IoT applications that require large bandwidth. We show that the proposed implementation on field programmable gate arrays (FPGAs) can achieve over 1.56x improvement in performance, while consuming 77% less generic resources and at a fractionally higher power consumption.

With the continuous development of the Internet of Things (IoT) and the needs of the times, the number of IoT edge devices is rapidly increasing, and to be able to provide users with more reliable information services and decision-making, this paper constructs an IoT system based on cloud-edge collaboration. Based on cloud-edge collaboration, data mining technology is used to categorize data, and regression models and branch neural networks are combined to further improve the IoT system based on cloud-edge collaboration. Finally, the particle swarm algorithm is used to optimize reinforcement learning, and the framework of an IoT system built on cloud-edge partnership is established. Through the data processing experiments on IoT edge computing, the data mining performance of the IoT edge computing-based data mining method is improved by 0.0295, 0.1870, and 0.2059 on the large datasets of Dataset4 and Dataset5, respectively. the average turnaround time is lower than 6.5 for different edge computing power levels. The system rewards are gradually improved from 5.3 to 8.2, and the number of packet loss of the algorithm is less than 5. The feasibility and effectiveness of the IoT data mining method and system based on cloud-edge collaboration are confirmed by this study, and a feasible method for data mining can be applied to IoT systems under cloud-edge collaboration.

Computational notebooks to support developers in prototyping IoT systems