An artificial neural network model for accurate and efficient optical property mapping from spatial-frequency domain images

We present an Artificial Neural Network (ANN) model and a new correlation for predicting natural gas density under nanoconfined conditions, accounting for pressure, temperature, fluid composition, pore size, and fluid-solid interaction coefficients. We investigate a five-component, single-phase dry shale-gas system over a broad composition space, generating 7,500 data points using the multicomponent simplified local density (MSLD) method. Gas compositions together with key input parameters – pressure (P), temperature (T), pore size (d), solid-solid interaction energy (ɛss), and solid-solid molecular diameter (σss) are sampled via Latin Hypercube Sampling (LHS) to obtain a space-filling design that covers the full range of each input with far fewer runs than a full factorial design. These data points are divided into 70% for the training set, 15% for the validation set, and 15% for the testing set. The ANN model is then optimized by adjusting key parameters such as the number of hidden layers, the number of neurons per layer, and the choice of training algorithms, among others. The performance of the ANN model is evaluated by comparing its predictions with those of MSLD. An empirical correlation is further developed from the MSLD-generated dataset to provide a simple, explicit, and fast predictive expression suitable for direct implementation in reservoir simulators. The results demonstrate that the ANN model can effectively replace the computationally intensive MSLD calculations, offering a significantly faster alternative without compromising accuracy. The ANN model achieved over 99% prediction accuracy. The fine-tuned ANN model and empirical correlation enable highly accurate predictions while delivering substantial computational savings, making it well-suited for compositional reservoir simulations of hydrocarbon flow in nanopores. To demonstrate the practical applicability of the proposed approach, a compositional reservoir simulation case of CO2 injection into a shale gas system is performed using MSLD, the ANN model, and the developed empirical correlation, enabling a direct comparison of their predictive capability and computational efficiency.

This study aimed to develop an artificial neural network (ANN) model to estimate the nitrate content in the surface water of the Gökırmak River. Samplings were carried out during 12 months from six stations between 2020 and 2021. Nitrate content varied between 0.20 and 2.70 mg l-1 while the mean value was 1.18 mg l-1 during the study period. The developed model consists of two input layers (month and station) and one output layer (nitrate content). Feed-forward backprop was used as the network type. Levenberg-Marquardt (TRAINLM) was used as a training function, LEARNGDM was used as an adaption learning function and mean squared error (MSE) was used as a performance function. The number of neurons was 10 and TANSIG was selected as transfer function. Epoch number adjusted 1000 iterations. ANN model predicted the nitrate content between 0.24 and 2.61 with a mean value of 1.16 mg l-1. The results showed that the best validation performance is 0.61264 at epoch 30. R values are 0.96257 and 0.84231 for training and testing, respectively. R-value was found 0.85352 for all data. In conclusion, this study presents the conception of an artificial neural network (ANN) model designed to predict nitrate concentrations in river water. The developed ANN model provides reasonable results for predicting the nitrate content using only given time and location inputs. More inputs can be included in future studies to ensure higher accuracy in the development of ANN models.

The generalization ability of artificial neural networks (ANNs) and M5 model tree (M5Tree) in modeling reference evapotranspiration (ET 0 ) is investigated in this study. Daily climatic data, average temperature, solar radiation, wind speed, and relative humidity from six different stations operated by California Irrigation Management Information System (CIMIS) located in two different regions of the USA were used in the applications. King-City Oasis Rd., Arroyo Seco, and Salinas North stations are located in San Joaquin region, and San Luis Obispo, Santa Monica, and Santa Barbara stations are located in the Southern region. In the first part of the study, the ANN and M5Tree models were used for estimating ET 0 of six stations and results were compared with the empirical methods. The ANN and M5Tree models were found to be better than the empirical models. In the second part of the study, the ANN and M5Tree models obtained from one station were tested using the data from the other two stations for each region. ANN models performed better than the CIMIS Penman, Hargreaves, Ritchie, and Turc models in two stations while the M5Tree models generally showed better accuracy than the corresponding empirical models in all stations. In the third part of the study, the ANN and M5Tree models were calibrated using three stations located in San Joaquin region and tested using the data from the other three stations located in the Southern region. Four-input ANN and M5Tree models performed better than the CIMIS Penman in only one station while the two-input ANN models were found to be better than the Hargreaves, Ritchie, and Turc models in two stations.

The present study was carried out using artificial neural network (ANN) model for predicting the sodium hazardness, i.e., sodium adsorption ratio (SAR), percent sodium (%Na) residual, Kelly’s ratio (KR), and residual sodium carbonate (RSC) in the groundwater of the Pratapgarh district of Southern Rajasthan, India. This study focuses on verifying the suitability of water for irrigational purpose, wherein more groundwater decline coupled with water quality problems compared to the other areas are observed. The southern part of the Rajasthan State is more populated as compared to the rest of the parts. The southern part of the Rajasthan is more populated as compared to the rest of the Rajasthan, which leads to the industrialization, urbanization, and evolutionary changes in the agricultural production in the southern region. Therefore, it is necessary to propose innovative methods for analyzing and predicting the water quality (WQ) for agricultural use. The study aims to develop an optimized artificial neural network (ANN) model to predict the sodium hazardness of groundwater for irrigation purposes. The ANN model was developed using ‘nntool’ in MATLAB software. The ANN model was trained and validated for ten years (2010–2020) of water quality data. An L-M 3-layer back propagation technique was adopted in ANN architecture to develop a reliable and accurate model for predicting the suitability of groundwater for irrigation. Furthermore, statistical performance indicators, such as RMSE, IA, R, and MBE, were used to check the consistency of ANN prediction results. The developed ANN model, i.e., ANN4 (3-12-1), ANN4 (4-15-1), ANN1 (4-5-1), and ANN4 (3-12-1), were found best suited for SAR, %Na, RSC, and KR water quality indicators for the Pratapgarh district. The performance analysis of the developed model (3-12-1) led to a correlation coefficient = 1, IA = 1, RMS = 0.14, and MBE = 0.0050. Hence, the proposed model provides a satisfactory match to the empirically generated datasets in the observed wells. This development of water quality modeling using an ANN model may help to useful for the planning of sustainable management and groundwater resources with crop suitability plans as per water quality.

Nitric acid production plants emit small amounts of nitrogen oxides (NOx) to the environment. As the regulatory authorities demand the reduction of the resulting air pollution, existing plants are looking for economical ways to comply with this demand. Several Artificial Neural Networks (ANN) models were trained from several months of operating plant data to predict the NOx concentration in the tail gas, and their total amount emitted the environment. The training of the ANN model was done by the Guterman-Boger algorithm set that generates a non-random initial connection weights, suggests a small number of hidden neurons, avoids, and escapes from, local minima encountered during the training. The ANN models gave small errors, 0.6% relative error on the NOx concentration prediction and 0.006 kg/hour on daily emission in the 20-45 kg NOx/hour range. Knowledge extraction from the trained ANN models revealed the underlying relationships between the plant operating variables and the NOx emission rate, especially the beneficial effect of cooling the absorbed gas and reticulating liquids in the absorption towers. Clustering the data by the patterns of the hidden neurons outputs of auto-associative ANN models of the same data revealed interesting insights.

Monthly river flow forecasting using artificial neural network and support vector regression models coupled with wavelet transform

BackgroundThis study aimed to develop an artificial neural network (ANN) model for predicting synchronous organ-specific metastasis in lung cancer (LC) patients.MethodsA total of 62,151 patients who diagnosed as LC without data missing between 2010 and 2015 were identified from Surveillance, Epidemiology, and End Results (SEER) program. The ANN model was trained and tested on an 75/25 split of the dataset. The receiver operating characteristic (ROC) curves, area under the curve (AUC) and sensitivity were used to evaluate and compare the ANN model with the random forest model.ResultsFor distant metastasis in the whole cohort, the ANN model had metrics AUC = 0.759, accuracy = 0.669, sensitivity = 0.906, and specificity = 0.613, which was better than the random forest model. For organ-specific metastasis in the cohort with distant metastasis, the sensitivity in bone metastasis, brain metastasis and liver metastasis were 0.913, 0.906 and 0.925, respectively. The most important variable was separate tumor nodules with 100% importance. The second important variable was visceral pleural invasion for distant metastasis, while histology for organ-specific metastasis.ConclusionsOur study developed a “two-step” ANN model for predicting synchronous organ-specific metastasis in LC patients. This ANN model may provide clinicians with more personalized clinical decisions, contribute to rationalize metastasis screening, and reduce the burden on patients and the health care system.

In this research work, we developed a mathematical model of a digital currency market, involving daily closing price as a function of time. We proposed the Artificial Neural Network (ANN) model. We observed that our ANN model was able to predict the daily closing price of Bitcoin and also make six weeks forecast to a reasonable degree of accuracy. We equally observe that the time dependent ANN model can actually give digital currency traders and investors a clue on when to trade off their digital assets with minimum risk. We therefore, recommend that ANN model should be incorporated into digital currency trading platforms as a signal tool to enable digital currency traders take more informed and less risky trading decisions. From our findings, we would advise traders who wish to employ ANN model to consider a smaller time frame say a few weeks’ time interval for their predictions. We observed also that ANN models have limitations when it comes to manual computation or implementation in Microsoft Excel, especially when dealing with very large input values. This is because of the saturation characteristic of our ANN inner layer activation function (viz; tanh function) which can lead to identical output values for different input values, making it difficult to replicate the ANN model's behavior. Furthermore, ANN models often involve complex interactions between multiple neurons, layers, and activation functions, which can be challenging to replicate manually.

Purpose – This paper aims to predict the needle penetration force (NPF) in denim fabrics using the artificial neural network (ANN) and multiple linear regression (MLR) models based on the effects of various sewing parameters. Design/methodology/approach – In order to design the ANN and MLR models, four parameters including fabric weight, number of fabric layers, weave pattern, and sewing needle size are taken into account as the input parameters and NPF as the output parameter. According to these parameters, 140 samples of data were resulted. Each sample was tested five times. From these 140 data (input-output data pairs), 112 were used for training the ANN and MLR models and 28 samples were used to test the performance of ANN and MLR. Also, the NPF was measured on the Instron tensile tester to simulate sewing process. Findings – The results indicated that the NPF in denim fabrics can be well predicted in terms of sewing parameters by using ANN and MLR models, in which the ANN model exhibits greater performance than MLR (RANN=0.989> RMLR=0.901). Research limitations/implications – The NPF measurement method is limited at low speed. Originality/value – Using the ANN model for forecasting NPF in denim fabrics can help the garment manufactures to produce high-quality denim products and improve the sewing process through reducing seam damage. The NPF could be also measured in the cycle loading conditions similar to sewing machine process by using a special designed tools mounted on the Instron tensile tester.

The purpose of this study was to validate the use of artificial neural network (ANN) models for predicting quality of life (QOL) after breast cancer surgery and to compare the predictive capability of ANNs with that of linear regression (LR) models. The European Organization for Research and Treatment of Cancer Quality of Life Questionnaire and its supplementary breast cancer measure were completed by 402 breast cancer patients at baseline and at 2 years postoperatively. The accuracy of the system models were evaluated in terms of mean square error (MSE) and mean absolute percentage error (MAPE). A global sensitivity analysis was also performed to assess the relative significance of input parameters in the system model and to rank the variables in order of importance. Compared to the LR model, the ANN model generally had smaller MSE and MAPE values in both the training and testing datasets. Most ANN models had MAPE values ranging from 4.70 to 19.96 %, and most had high prediction accuracy. The ANN model also outperformed the LR model in terms of prediction accuracy. According to global sensitivity analysis, pre-operative functional status was the best predictor of QOL after surgery. Compared with the conventional LR model, the ANN model in the study was more accurate for predicting patient-reported QOL and had higher overall performance indices. Further refinements are expected to obtain sufficient performance improvements for its routine use in clinical practice as an adjunctive decision-making tool.

Comparative study on constitutive relationship of as-cast Ti60 titanium alloy during hot deformation based on Arrhenius-type and artificial neural network models

Artificial intelligence-based estimation of flushing half-cone geometry

The power capacity of solar photovoltaics (PVs) in Korea has grown dramatically in recent years, and an accurate estimation of solar resources is crucial for the efficient management of these solar PV systems. Since the number of solar irradiance measurement sites is insufficient for Korea, satellite images can be useful sources for estimating solar irradiance over a wide area of Korea. In this study, an artificial neural network (ANN) model was constructed to calculate hourly global horizontal solar irradiance (GHI) from Korea Communication, Ocean and Meteorological Satellite (COMS) Meteorological Imager (MI) images. Solar position variables and five COMS MI channels were used as inputs for the ANN model. The basic ANN model was determined to have a window size of five for the input satellite images and two hidden layers, with 30 nodes on each hidden layer. After these ANN parameters were determined, the temporal and spatial applicability of the ANN model for solar irradiance mapping was validated. The final ANN ensemble model, which calculated the hourly GHI from 10 independent ANN models, exhibited a correlation coefficient (R) of 0.975 and root mean square error (RMSE) of 54.44 W/m² (12.93%), which were better results than for other remote-sensing based works for Korea. Finally, GHI maps for Korea were generated using the final ANN ensemble model. This COMS-based ANN model can contribute to the efficient estimation of solar resources and the improvement of the operational efficiency of solar PV systems for Korea.

ABSTRACTStatistical methods such as Poisson distribution, negative binomial regression (NB), and zero inflated negative binomial regression (ZINB) have generally been used in road safety studies to establish the complex relationships between variables. Over the last few years, the artificial neural networks (ANN) model has also been used. The ANN model does not have any prior limitations such as the equality condition of mean and variance observed in Poisson regression. However, though the ANN model has been used in the analysis of different accident types, to the best of our knowledge, no study has used the ANN model for establishing this relationship with truck accident data on divided multilane interurban roads. In this study, the road sections D750/07–D750/15 in Ankara–Aksaray–Eregli, Turkey, were considered and truck accident data from 2008 to 2011 were analyzed using NB and ANN. The analysis show that the ANN model has lower errors and higher R2 values than NB and performs slightly better than NB for predicting the number of trucks involved in accidents. Based on a comparison of performances the study concludes, that ANN could be used as an alternative model for analyzing truck accident data on divided multilane interurban roads in Turkey.

Single point incremental forming (SPIF) is an advanced, flexible, and cost-effective approach for producing complicated sheet metal objects quickly. Because of its low equipment cost, the process is best suited toward low or medium quantity batch production as the conventional stamping method remains cost-effective only for mass manufacture. During SPIF formation of titanium grade 5 materials, a response surface methodology and artificial neural network (ANN) model was created to optimize and estimate wall angle (Ømax) and average surface roughness ( Ra). The ANN model is developed using feed forward back propagation networks. Various combinations of transfer functions and number of neurons were used to create the ANNs (3- n-1, 3- n-2). The confirmation runs have been used to ensure that the ANN anticipated and practical findings have been in agreement. The generated ANN model (3- n-1) was capable of accurately forecasting the results of the experiment, with an overall R-value and Mean Square Error (MSE) of 0.99987 and 0.010905 for Ra, and 0.99999 and 0.00700 for wall angle. The best 3- n-2 models has an average R-value of 0.99992 and MSE of 0.05532, respectively. As a consequence of rapid ANN modeling technique, it became discovered that technical effort inside the SPIF process could be decreased.