An Ear Recognition Method Based on Rotation Invariant Transformed DCT

Feature selection is one of the best optimization problems in human recognition, which reduces the number of features, removes noise and redundant data in images, and results in high rate of recognition. This step affects on the performance of a human recognition system. This paper presents a multimodal biometric verification system based on two features of palm and ear which has emerged as one of the most extensively studied research topics that spans multiple disciplines such as pattern recognition, signal processing and computer vision. Also, we present a novel Feature selection algorithm based on Particle Swarm Optimization (PSO). PSO is a computational paradigm based on the idea of collaborative behavior inspired by the social behavior of bird flocking or fish schooling. In this method, we used from two Feature selection techniques: the Discrete Cosine Transforms (DCT) and the Discrete Wavelet Transform (DWT). The identification process can be divided into the following phases: capturing the image; pre-processing; extracting and normalizing the palm and ear images; feature extraction; matching and fusion; and finally, a decision based on PSO and GA classifiers. The system was tested on a database of 60 people (240 palm and 180 ear images). Experimental results show that the PSO-based feature selection algorithm was found to generate excellent recognition results with the minimal set of selected features.

Objective To investigate the feasibility of speech recognition technologies including double threshold method, Mel frequency cepstral coefficient (MFCC) and vector quantization (VQ) in automatic recognition of cough sounds. Methods Five healthy adults and 15 patients with cough were recruited for recording of both non- cough and cough sounds in a quiet environment. The records were randomized into training and testing samples. The training samples were used to generate the code book for cough recognition software, which was then used to recognize and analyze the testing samples automatically.The sensitivity and specificity of recognition were calculated by comparison with outcomes from human ear recognition. The recognition time in two approaches was recorded. Results Two hundred cough and 200 noncough sound samples were used to generate the code book for cough recognition software, while 375 cough sound samples and 125 non-cough sound samples were used as the testing samples. The recognition time of the testing samples needed was 33 minutes and 18 seconds by human ear recognition vs 1 minute and 35seconds by code book-based automatic recognition. In addition, the sensitivity and specificity in code bookbased automatic recognition of the cough sound were 98.93% and 100% respectively. Conclusion The double threshold method based on VQ and MFCC appears feasible in automatic recognition of cough sounds. Key words: Cough; Speech recognition software; Pattern recognition, automatic; Sensitivity and specificity; Human ear recognition

An ear biometric system based on artificial bees and the scale invariant feature transform

Biometric authentication for personal identification is very popular now a days. Human ear recognition system is a new technology in this field. The change of appearance with the expression was a major problem in face biometrics but in case of ear biometrics the shape and appearance is fixed. That is why it is advantageous to use it for personal identification. In this paper, we have proposed a new approach for an automated system for human ear identification. Our proposed method consists of three stages. In the first stage, preprocessing of ear image is done for its contrast enhancement and size normalization. In the second stage, features are extracted through Haar wavelets followed by ear identification using fast normalized cross correlation in the third stage. The proposed method is applied on USTB ear image database and IIT Delhi. Experimental results show that our proposed system achieves an average accuracy of 97.2% and 95.2% on these databases respectively.

Biometrics includes the study of automatic methods for distinguishing human beings based on physical or behavioral traits. Finding good biometric methods has been researched extensively in recent years. Among several biometric features, ear is quite stable because it does not vary with age and emotion. The ear recognition works based on the height of the ear, reference line cut point and corresponding angles. The study is performed on the ear in random orientation and shows a greater accuracy than existing dominant approach. The recognition accuracy is increased by removing the noise in captured ear images and developing new methodologies to work with online images.

This article presents a robust and efficient system for euro and Mexican banknote recognition. A high banknote recognition and classification rate was achieved using neural networks and deep learning with real scene images taken with both sunlight and artificial light. Without extracting characteristics by hand, the convolutional neural networks was fed with raw images. Analysis and experiments were carried out on banknotes based on key features, such as; watermarks, portraits on the bills, bill value written in words and numbers, and the complete banknotes. It was concluded that both the color information and some regions of the banknotes, as well as the banknote denomination written in words and numbers and the complete banknote, is the appropriate information to achieve a high rate of banknote classification and recognition. The experimental results show that the proposed approach is promising with quite remarkable results; it performs an efficient and robust classification using real scene images taken with both sunlight and artificial light and is invariant to banknote rotation and translation. A high recognition rate was achieved for Mexican banknotes and for euros. At present, the results contained herein are an improvement over thosereported in the state of the art.

Femtosecond laser dot-matrix marking on nickel-based alloy using a simple diaphragm-based spatial shaped modulation: Size and position control of marking units with high recognition rate

Ear recognition is a new kind of biometric identification technology now. Feature extraction is a key step in pattern recognition technology, which determines the accuracy of classification results. The method of single feature extraction can achieve high recognition rate under certain conditions, but the use of double feature extraction can overcome the limitation of single feature extraction. In order to improve the accuracy of classification results, this paper proposes a new method, that is, the method of complementary double feature extraction based on PCA and Fisherface, and we apply it to human ear image recognition. Experimental results on the ear image database provided by Beijing University of Science and Technology show that the ear recognition rate of the proposed method is significantly higher than the single feature extraction using PCA, Fisherface or ICA alone.

The use of the ear as a biometric modality has emerged in recent years. It makes it possible to differentiate people thanks to its stability over time and to the richness of its characteristics such as texture, color and size. This paper proposes a novel approach to ear recognition based on a variant of the Local Binary Pattern descriptor called Multi-scale Local Binary Pattern (MLBP). MLBP is calculated locally, by dividing the image into several equal blocks, to extract the ear features which will be used in the matching process to make a decision by detecting the similarities between the feature vectors using City-Block distance (CTB). The proposed method is evaluated on three reference ear databases: IIT Delhi I, IIT Delhi II and USTB-1. The analysis of the results obtained have clearly shown the robustness and the stability of the proposed ear recognition method which is highly competitive, achieving an attractive recognition performances in terms of identification rate at rank-1 up to: 98.40% for IIT Delhi I, 98.64% for IIT Delhi II, and 98.33% for USTB-1.

Ear recognition: More than a survey

When only one sample per person (OSPP) is registered in the gallery, it is difficult for ear recognition methods to sufficiently and effectively reduce the search range of the matching features, thus resulting in low computational efficiency and mismatch problems. A 3D ear biometric system using OSPP is proposed to solve this problem. By categorising ear images by shape and establishing the corresponding relationship between keypoints from ear images and regions (regional cluster) on the directional proposals that can be arranged to roughly face the ear image, the corresponding keypoints are obtained. Then, ear recognition is performed by combining corresponding keypoints and a multi-keypoint descriptor sparse representation classification method. The experimental results conducted on the University of Notre Dame Collection J2 dataset yielded a rank-1 recognition rate of 98.84%; furthermore, the time for one identification operation shared by each gallery subject was 0.047 ms.

An inspection and classification method for chip solder joints using color grads and Boolean rules

Ear images have been shown to be a reliable modality for biometric recognition with desirable characteristics, such as high universality, distinctiveness, measurability and permanence. While a considerable amount of research has been directed towards ear recognition techniques, the problem of ear alignment is still under‐explored in the open literature. Nonetheless, accurate alignment of ear images, especially in unconstrained acquisition scenarios, where the ear appearance is expected to vary widely due to pose and view point variations, is critical for the performance of all downstream tasks, including ear recognition. Here, the authors address this problem and present a framework for ear alignment that relies on a two‐step procedure: (i) automatic landmark detection and (ii) fiducial point alignment. For the first (landmark detection) step, the authors implement and train a Two‐Stack Hourglass model (2‐SHGNet) capable of accurately predicting 55 landmarks on diverse ear images captured in uncontrolled conditions. For the second (alignment) step, the authors use the Random Sample Consensus (RANSAC) algorithm to align the estimated landmark/fiducial points with a pre‐defined ear shape (i.e. a collection of average ear landmark positions). The authors evaluate the proposed framework in comprehensive experiments on the AWEx and ITWE datasets and show that the 2‐SHGNet model leads to more accurate landmark predictions than competing state‐of‐the‐art models from the literature. Furthermore, the authors also demonstrate that the alignment step significantly improves recognition accuracy with ear images from unconstrained environments compared to unaligned imagery.

Ear is a relatively new biometric among others. Many methods have been used for ear recognition to improve the performance of ear recognition systems. In continuation of these efforts, we propose a new ear recognition method based on curvelet transform. Features of the ear are computed by applying Fast Discrete Curvelet Transform via the wrapping technique. Feature vector of each image is composed of an approximate curvelet coefficient and second coarsest level curvelet coefficients at eight different angles. k-NN (k-nearest neighbour) is utilized as a classifier. The proposed method is experimented on two ear databases from IIT Delhi. Results achieved using the proposed method on publicly available ear database are up to 97.77% which show encouraging performance.

A pose-wise linear illumination manifold model for face recognition using video