An effective co-evolutionary artificial bee colony algorithm for steelmaking-continuous casting scheduling

The performance of task scheduling algorithm in cloud computing determines the performance of the cloud system. This study mainly analyzed the application of the artificial bee colony (ABC) algorithm in the cloud task scheduling. In order to solve the problem of cloud task scheduling, the ABC algorithm was discretized to get the discrete artificial bee colony (DABC) algorithm. Then the mathematical model of cloud task scheduling was established and solved by the DABC algorithm. Finally, the simulation experiment was carried out, and the performance of first-come-first-served (FCFS), MIN–MIN, ABC and DABC algorithms under different cloud tasks was compared to verify the performance of the proposed algorithm. The results showed that the user waiting time of the DABC algorithm was 1210s, the load balance degree was 0.01, and the user payment fee was 1688 yuan when the number of cloud tasks was 500; compared with other algorithms, the user waiting time of the DABC algorithm was shorter, the resource load balance degree was higher, and the overall performance was better. The research results verify the effectiveness of the DABC algorithm in solving the problem of cloud task optimal scheduling, and it can be further extended and applied in practice.

Welded structures are widely used in many engineering load carrying structures such as columns, towers for wind turbine or water tanks, offshore and submarine structures, girders, stiffened doors, etc. welding is a costly fabrication process and proper sequence and welding process effect the cost of a huge structure. Keeping this in view two different problems from the literature for the cost optimization of welded structures are considered in this paper. The optimization procedure is carried out using artificial bee colony (ABC) optimization technique. Classical ABC is modified to increase the convergence rate of the original algorithm. Comparison of both the variants is experimented on many bench mark examples from the literature and also on two cost optimization problems of welded structures. The results of the considered techniques are compared with the previously published results. The considered techniques have given much better results in comparison to the previously tried approaches and also modified ABC has shown superiority over classical ABC.

Swarm intelligence is briefly defined as the collective behavior of decentralized and self-organized swarms. Self-organization and labor division are the two key components of swarm intelligence. Artificial Bee Colony (ABC) algorithm is one of the most recent swarm intelligence-based algorithms. The behavior of bees in ABC algorithm satisfies the self-organization features, but there is no specific labor division mechanism in ABC algorithm. In this work, we propose an improved ABC algorithm called labor division artificial bee colony (LDABC) algorithm by incorporating the labor division mechanism into ABC algorithm, which is achieved by individual specialization and role plasticity. We specify three different search methods for employed bees, onlooker bees and scout bees to realize individual specialization, these search methods are related to food source quality, enable bees to maximize exploitation of food source. Role plasticity is achieved by combining with cellular automata, where the roles of bees are not static but vary with their surrounding environment, enable bees not to limit to one search method. The different search modes and the flexibility of the search behaviors make our algorithm achieve a better balance between exploration and exploitation. The experimental results tested on 13 benchmark functions and CEC-2013 test functions demonstrate a competitive performance.

The artificial bee colony (ABC) algorithm is an important branch of evolutionary algorithms and has been shown to be competitive with other algorithms for solving optimisation problems. However, there are always some insufficiencies in ABC algorithm such as lower convergence speed and easily get trapped in the local optima. To increase depth search capabilities of onlooker bees and ensure scout bees do not discard the current optimal solution, we proposed a modified ABC algorithm (denoted as ORABC) based on the optimisation strategy and retained strategy of the best individual in this paper. Compared with ABC algorithm, ABC* (added retained strategy to ABC) and ORABC algorithm, experiments are conducted on a set of numerical benchmark functions. The numerical simulation results demonstrate that ORABC algorithm improves the convergence characteristics of ABC algorithm and provides very remarkable performance in solving complex numerical optimisation problems compared to original algorithm.

INTRODUCTION: The artificial bee colony (ABC) algorithm is a nature-inspired technique used for solving different optimization problems. This paper presents a multi-hive ABC algorithm for solving constrained benchmark functions of CEC2006. The CEC2006 data set contains the global benchmark functions with different design variables, number and type of constraints. OBJECTIVES: The objective of the proposed work is to design and apply the GPGPU based multi-hive ABC algorithm to solve constrained optimization problems. METHODS: The proposed approach is a multi-population coarse-grained system implemented using General Purpose Graphics Processing Unit (GPGPU). The performance of the proposed approach is compared with the serial ABC algorithm for eleven benchmark functions and results in the literature. The multi-hive ABC algorithm has multiple hives, each running separate ABC algorithm on different cores of GPGPU. RESULTS: The proposed approach provides global best solutions in significantly reduced time for all benchmark functions. The speed-up obtained is approximately 7X to 9X. The GPGPU device utilization is approximately 57% to 91%. CONCLUSION: The GPGPU based multi-hive ABC algorithm is a found good with respect to best results, speed up factor and GPU utilization to solve constrained optimization problems.

An adaptive chaotic artificial bee colony algorithm for short-term hydrothermal generation scheduling

The problem of airline maintenance scheduling is considered in this paper. A maintenance-scheduling model that can determine rational maintenance date is established, in this model, while aircraft materials as well as other factors are taken as constraints, and aircraft air-on-ground (AOG) loss is set as goal function. In order to solve the model, Artificial Bee Colony (ABC) algorithm is utilized by setting the appropriate number of the bees, which can find the optimal solution rapidly. Finally, airline’s practical data is applied to validate the feasibility and practicality of the model and ABC algorithm.

A self adaptive hybrid enhanced artificial bee colony algorithm for continuous optimization problems

Archive-based multi-criteria Artificial Bee Colony algorithm for whole test suite generation

This paper investigates the multistage hybrid flow shop (HFS) scheduling problems using the new bat algorithm. A HFS is the generalisation of flowshop with multiple machines. HFS is one of the important scheduling problems that represent many industries like iron and steel, chemical, textile and ceramic industries. The HFS scheduling problems have been proved to be NP-hard. A recently developed bat meta-heuristic algorithm is proposed to solve the HFS problems. The proposed algorithm is validated with a well-chosen set of benchmark problems in the literature. Computational results indicate that the proposed bat algorithm is more efficient than the genetic algorithm and particle swarm optimisation.

PurposeThe purpose of this paper is to use an ABC algorithm to improve the thrust–torque ratio of a rotating-wing unmanned aerial vehicle (UAV) model.Design/methodology/approachThe design of UAVs, such as aircraft, drones, helicopters, has become one of the popular engineering areas with the development of technology. This study aims to improve the value of thrust–torque ratio of an unmanned helicopter. For this purpose, an unmanned helicopter was built at the Faculty of Aeronautics and Astronautics, Erciyes University. The maximum thrust–torque ratio was calculated considering the blade length, blade chord width, blade mass density and blade twist angle. For calculation, artificial bee colony (ABC) algorithm was used. By using ABC algorithm, the maximum thrust–torque ratio was obtained against the optimum input values. For this purpose, a model with four inputs and a single output is formed. In the generated system model, optimum thrust–torque ratio was calculated by changing the input values used in the ±5% range. As a result of this study, approximately 31% improvement was achieved. According to these results, the proposed approach will provide convenience to the designers in the design of the rotating-wing UAV.FindingsAccording to these results, approximately 31% improvement was achieved, and the proposed approach will provide convenience to the designers in the design of the rotating-wing UAV.Research limitations/implicationsIt takes a long time to obtain the optimum thrust–torque ratio value through the ABC algorithm method.Practical implicationsUsing ABC algorithm provides to improve the value of thrust–torque ratio of an unmanned helicopter. With this algorithm, unmanned helicopter flies more than ever. Thus, the presented method based on the ABC algorithm is more efficient.Social implicationsThe application of the ABC algorithm method can be used effectively to calculate the thrust–torque ratio in UAV.Originality/valueProviding an original and penetrating a method that saves time and reduces the cost to improve the value of thrust–torque ratio of an unmanned helicopter.

Gbest-guided artificial bee colony algorithm for numerical function optimization

Artificial Bee Colony (ABC) algorithm inspired by the complex search and foraging behaviors of real honey bees is one of the most promising implementations of the Swarm Intelligence- (SI-) based optimization algorithms. Due to its robust and phase-divided structure, the ABC algorithm has been successfully applied to different types of optimization problems. However, some assumptions that are made with the purpose of reducing implementation difficulties about the sophisticated behaviours of employed, onlooker, and scout bees still require changes with the more literal procedures. In this study, the ABC algorithm and its well-known variants are powered by adding a new control mechanism in which the decision-making process of the employed bees managing transitions to the dance area is modeled. Experimental studies with different types of problems and analysis about the parallelization showed that the newly proposed approach significantly improved the qualities of the final solutions and convergence characteristics compared to the standard implementations of the ABC algorithms.

The Economic Load Dispatch (ELD) is considered to minimize the only fuel cost in power system planning and operation. Due to environmental issues, the emission amount released by thermal power generation should be considered in minimizing the total cost generation as well. This make the power dispatch problem become multi-objective problem that called Economic and Emission Load Dispatch (EELD). This paper investigates the performances of Artificial Bee colony (ABC) algorithm for determining optimal solution for EELD problem. In this paper, the EELD problem is formulated as a single objective problem by taking minimization of total cost and emission level as separated objective. The cost characteristic of thermal generator considered the effect of opening and closing of the valve for practical application. The ABC algorithm has been tested on standard test systems which is 10-generating unit test system in order to validate the effectiveness of proposed ABC algorithm. The results obtained have been compared with reported result by other methods in literature. From the result, it found that ABC algorithm is better than other methods for minimizing fuel cost of thermal power generation and obtained comparative results in reducing the emission level.

Introduction:Reliability analysis is a good tool to deal with the uncertainty and has been widely used in the engineering system. The first order reliability method (FORM) is generally used to calculate the reliability index but FORM is time-consuming and requires derivative computing.Methods:Artificial Bee Colony (ABC) algorithm is a very simple, robust and population-based stochastic optimization algorithm. In this study, an ABC-based reliability analysis was proposed to calculate the reliability index of engineering system through combining Artificial Bee Colony (ABC) algorithm with FORM. FORM was adopted to calculate the reliability index and design point. ABC is used to solve the constrained optimization about FORM. The procedure of ABC-based reliability analysis was presented in detail.Results and Conclusion:The proposed method was verified by two classic examples and then applied to geotechnical engineering. The results show that the ABC algorithm can effectively solve the global optimization problem in FORM. Results demonstrate that ABC-based reliability analysis is a good approach to obtain the reliability index and design point with a good accuracy so that it can be applied to analyze the reliability of a complex engineering system.