An Effective Method of Image Retrieval using Image Mining Techniques

As the use of digital media increases, effective retrieval and management techniques become more important. In order to extract useful information from this huge amount of data, many content based image retrieval (CBIR) systems have been developed. A typical CBIR system captures image features such as color, texture, or shape of objects in the query image and tries to retrieve images from the database with similar features. The main advantage of CBIR systems with relevance feedback is that these systems take into account the gap between the high-level concepts and low-level features and subjectivity of human perception of visual content. In this paper, a CBIR system based on color histogram has been presented and a new approach for image storage and retrieval called association-based image retrieval (ABIR) has been studied. The results of both systems have been shown.

Introduction: Content-based image retrieval (CBIR) retrieves the images from the vast image repositories. Research in the CBIR domain gets attention due to the massive number of images generated by the mobiles and various image-capturing machines. Objectives: Any image retrieval system’s primary goal is to reduce the semantic gap between low-level features and high-level perception. Methods: The CBIR techniques are classified into multiple categories based on the feature extraction and retrieval mechanism. These categories are feature-based, machine-learning-based, and deep-learning-based methods. The pioneer techniques for each category are explained in detail in this chapter. Results: The comparative analysis has been done to highlight the advantages of techniques over others. Conclusion: The various application area of the CBIR has been described. The most evolving application is the content-based medical image retrieval (CBMIR) system. The applicability of the CBMIR system in different medical science domains is explained in detail.

In a content-based image retrieval (CBIR) system, indexing feature vectors and the similarity measure between feature vectors are two key factors for retrieval performance. We present a new CBIR system with statistical-model based image feature extraction in the wavelet domain and a Kullback divergence based similarity measure. A two component Gaussian mixture model (GMM) in the wavelet domain is employed and the model parameters are used to form features for image indexing. A new Kullback divergence based similarity measure is then presented for image retrieval. The experimental results demonstrate that the similarity measure based on the Kullback divergence is more effective than conventional similarity measures, such as the city-block distance and the Euclidean distance. It is shown that the new CBIR system, with the combination of the GMM and the new Kullback divergence based similarity measure, outperforms most other methods in retrieval performance for texture images, while keeping a comparable level of computational complexity.

There is a growing trend for using content‐based image retrieval (CBIR) systems these days because of the constantly growing interest in digital content. Therefore, the ability of the CBIR to perform the CBIR process will depend on the feature extraction process and its basis, for the retrieval will be done on. Numerous researchers put forward various techniques for feature extraction to enhance the nature of the system. Since features play a very key role in enhancing performance, various features can be used collectively to attain the requisite goal. To retain this in mind, we present in this paper a multifeature fusion system, where three features are integrated and form one feature to improve the situation of retrieval. For this purpose, scale‐invariant feature transform (SIFT), speeded‐up robust features (SURF), and histogram of oriented gradients (HOG) features are adopted. These features are common features that deliver information about the shape of the object and for matching purposes, two techniques of distance matching such as Euclidean and Hausdrauff distance are adopted. To assess the performance of the proposed multifeature‐based CBIR approach, experiments were conducted with the usage of a MATLAB simulator. The Corel‐1000 dataset, consisting of 10,000 images in 100 semantic classes, turned into applied, with each magnificence containing 100 images. A subset of 2500 images across 50 semantic classes was used to train the system. This research aligns with industry, innovation, and infrastructure by contributing to advancements in image processing and retrieval systems. Key characteristic descriptors, along with SIFT, SURF, HOG, texture, and multicharacteristic combinations, were extracted for retrieval functions. The results display that the usage of the Hausdrauff distance as a similarity degree outperforms Euclidean distance, accomplishing retrieval accuracies of 80.02% for HOG, 77.9% for SIFT, 79. 8% for SURF, 77.2% for texture, and 84.2% for multicharacteristic combinations, surpassing Euclidean distance results via 1.7%–3.6% across capabilities. These findings underscore the effectiveness of Hausdrauff distance in enhancing retrieval precision within the CBIR framework.

In the field of computer vision and image processing CBIR (Content based image retrieval) system become an active research area. The CBIR technique involves feature extraction based on image features (like color, shape and texture) and defining rules for comparing image. A classifier is also used by authors for image classification. For this purpose an image database taken from James Z. Wang research group website is used by many authors. Due to enormous increase in the size of database traditional methods of image retrieval by using keywords does not provide accurate result. Thus the concept of CBIR system is emerged. In last couple of years many method of feature extraction is developed but since now researcher are not able to develop a system which has gained high accuracy of human visual perception in distinguishing pictures. Therefore earlier researchers have concentrated to increase the retrieval accuracy of CBIR system by using different combination of features. The objective of this paper is to present review on a CBIR technique which combined four kinds of features set including every kind of feature for developing feature vector. Color based features (histogram), statistical features (mean, median and standard deviation), spatial features (Gabor feature and wavelet features) and texture features (GLCM) is used for forming feature vector. A SVM classifier is used with CBIR system to increase retrieval accuracy. SVM (support vector machine) is a machine learning classifier which provides good classification accuracy. Keywords: CBIR, SVM, NN, GLCM, HSV Color space, Euclidean distance matrix.

This paper presents an image representation and matching framework for image categorization in medical image archives. Categorization enables one to determine automatically, based on the image content, the examined body region and imaging modality. It is a basic step in content-based image retrieval (CBIR) systems, the goal of which is to augment text-based search with visual information analysis. CBIR systems are currently being integrated with picture archiving and communication systems for increasing the overall search capabilities and tools available to radiologists. The proposed methodology is comprised of a continuous and probabilistic image representation scheme using Gaussian mixture modeling (GMM) along with information-theoretic image matching via the Kullback-Leibler (KL) measure. The GMM-KL framework is used for matching and categorizing X-ray images by body regions. A multidimensional feature space is used to represent the image input, including intensity, texture, and spatial information. Unsupervised clustering via the GMM is used to extract coherent regions in feature space that are then used in the matching process. A dominant characteristic of the radiological images is their poor contrast and large intensity variations. This presents a challenge to matching among the images, and is handled via an illumination-invariant representation. The GMM-KL framework is evaluated for image categorization and image retrieval on a dataset of 1500 radiological images. A classification rate of 97.5% was achieved. The classification results compare favorably with reported global and local representation schemes. Precision versus recall curves indicate a strong retrieval result as compared with other state-of-the-art retrieval techniques. Finally, category models are learned and results are presented for comparing images to learned category models.

This paper presents novel approaches for combining re-ranking and rank aggregation methods aiming at improving the effectiveness of Content-Based Image Retrieval (CBIR) systems. Given a query image as input, CBIR systems retrieve the most similar images in a collection by taking into account image visual properties. In this scenario, accurately ranking collection images is of great relevance. Aiming at improving the effectiveness of CBIR systems, re-ranking and rank aggregation algorithms have been proposed. However, different re-ranking and rank aggregation approaches, applied to different image descriptors, may produce different and complementary image rankings. In this paper, we present four novel approaches for combining these rankings aiming at obtaining more effective results. Several experiments were conducted involving shape, color, and texture descriptors. The proposed approaches are also evaluated on multimodal retrieval tasks, considering visual and textual descriptors. Experimental results demonstrate that our approaches can improve significantly the effectiveness of image retrieval systems.

With the rapid growing volume of images in medical databases, development of efficient image retrieval systems to retrieve relevant or similar images to a query image has become an active research area. Despite many efforts to improve the performance of techniques for accurate image retrieval, its success in biomedicine thus far has been quite limited. This article presents an adaptive content-based image retrieval (CBIR) system for improving the performance of image retrieval in mammographic databases. In this work, the authors propose a new relevance feedback approach based on incremental learning with support vector machine (SVM) regression. Also, the authors present a new local perturbation method to further improve the performance of the proposed relevance feedback system. The approaches enable efficient online learning by adapting the current trained model to changes prompted by the user's relevance feedback, avoiding the burden of retraining the CBIR system. To demonstrate the proposed image retrieval system, the authors used two mammogram data sets: A set of 76 mammograms scored based on geometrical similarity and a larger set of 200 mammograms scored by expert radiologists based on pathological findings. The experimental results show that the proposed relevance feedback strategy improves the retrieval precision for both data sets while achieving high efficiency compared to offline SVM. For the data set of 200 mammograms, the authors obtained an average precision of 0.48 and an area under the precision-recall curve of 0.79. In addition, using the same database, the authors achieved a high pathology matching rate greater than 80% between the query and the top retrieved images after relevance feedback. Using mammographic databases, the results demonstrate that the proposed approach is more accurate than the model without using relevance feedback not only in image retrieval but also in pathology matching while maintaining its effectiveness for online relevance feedback applications.

Content-Based Image Retrieval (CBIR) systems play a crucial role in managing the exponential growth of digital image collections. Their task is to retrieve relevant images by analysing the content of a query image rather than relying on metadata. The idea here is to extract relevant features from the query image and find a similar set of features in other images. The current generation of CBIR systems faces difficulties in bridging the “semantic gap” between image features at low levels and human perception at high levels which reduces retrieval precision. The research targets CBIR performance enhancement by developing state-of-the-art deep learning techniques for feature extraction. We implemented two approaches which included a custom Convolutional Neural Network (CNN) with six convolutional layers and a finetuned ResNet50 model trained on the CIFAR-10 dataset, and the finetuned model demonstrated better performance than numerous existing CBIR systems. The networks extracted 512-dimensional feature vectors from their penultimate layer for subsequent similarity-matching operations. The fine-tuned ResNet50 model delivered better retrieval results than our custom CNN model since it reached a Mean Average Precision (MAP) score of 98.7%, while the custom CNN achieved 87.3%. We built a web-based interface that allows users to perform real-time image retrieval through multiple evaluation metrics.

Medical imaging is becoming a vital component of war on cancer. Tremendous amounts of medical image data are captured and recorded in a digital format during cancer care and cancer research. Facing such an unprecedented volume of image data with heterogeneous image modalities, it is necessary to develop effective and efficient content-based medical image retrieval systems for cancer clinical practice and research. While substantial progress has been made in different areas of content-based image retrieval (CBIR) research, direct applications of existing CBIR techniques to the medical images produced unsatisfactory results, because of the unique characteristics of medical images. In this paper, we develop a new multimodal medical image retrieval approach based on the recent advances in the statistical graphic model and deep learning. Specifically, we first investigate a new extended probabilistic Latent Semantic Analysis model to integrate the visual and textual information from medical images to bridge the semantic gap. We then develop a new deep Boltzmann machine-based multimodal learning model to learn the joint density model from multimodal information in order to derive the missing modality. Experimental results with large volume of real-world medical images have shown that our new approach is a promising solution for the next-generation medical imaging indexing and retrieval system.

An image retrieval system was developed purposely to provide an efficient tool for a set of images from a collection of images in the large database that matches the user’s requirements in similarity evaluations such as image content similarity, edge, and colour similarity. Retrieving images based on the contents which are colour, texture, and shape is called content-based image retrieval (CBIR). This paper discusses and describes about the colour features technique for image retrieval systems. Several colour features technique and algorithms produced by the previous researcher are used to calculate the similarity between extracted features. This paper also describes about the specific technique about the colour basis features and combined features (hybrid techniques) between colour and shape features.

Content-based image retrieval (CBIR) techniques will be part of the next generation of search engines. However, even with a suitable retrieval method, real-time image retrieval from a large image database still requires extremely high computational power. In this paper, a Web-based image database indexing and retrieval system is described. It uses fast CBIR with Beowulf-Class parallel computing engine (Super Abacus) to efficiently and effectively shorten the retrieval time. Content-based image retrieval with several parallel algorithms for images which query different color spaces and the compressed-domain of the images are developed to achieve higher efficiency. Text-based query is also supported for images using a conventional annotation approach.

Radiologists are now confronted with the difficulty of interpreting cross-sectional studies composed of thousands of images. In hospitals, all acquired imaging data are stored in a picture archiving and communication system (PACS). To take advantage of these masses of previously interpreted images, with the ultimate goal to facilitate the diagnosis of new cases, a promising approach would be to integrate a Content-Based Image Retrieval (CBIR) system into PACS. CBIR system performances are inherently limited by the features considered to represent the images. The current state of the art for the extraction of visual features relies on deep learning which requires a sufficient amount of annotated data to learn a generalizable model, such annotated data being rare and difficult to use in medical imaging. At the same time, PACS contain additional information such as radiological reports which supplement visual information carried by the images. We study here how such semantic information, hidden in these reports, can be used to supervise the learning of neuronal models to build a better visual representation of images. In this context our contribution is threefold. We first adapted a contrastive learning approach, which is usually used to learn representation from pairs of positive images in an unsupervised manner, to deal with in-domain medical data. Second, to train such a model to be robust and generalizable with a sufficient amount of data, we propose to re-employ the "dormant" medical imaging literature. Finally, the visual features and the deep models learned in this way, can be considered in CBIR systems as coarse-grained information which can then be fine-tuned in PACS, with more specific images depending on the applications. The obtained experimental result with state of the art contrastive learning methods highlight the interest of this approach.

This article proposes a content‐based image retrieval (CBIR) system that employs an informative pattern‐based descriptor. Recent literature has reported the development of efficient local‐pattern‐based descriptors, including the local vector pattern (LVP). This article extends the LVP formulation by making it more computationally efficient and informative. In the extended LVP‐based extraction process, the global index angles are determined using the mutual information between the patterns, which are obtained from a pair of indexed angles. Thus, the Proposed LVP (PLVP) no longer requires a step to identify patterns in every indexed angle found in the querying phase of the CBIR system. A CBIR system with the PLVP is developed in this article, and the system and its associated methods are tested using data from a benchmark texture database and a natural image database. A performance comparison of the PLVP and traditional patterns, such as the local binary pattern (LBP), completely modeled local binary pattern (CLBP) and local tetra pattern (LTrP), is conducted using the CBIR system. The experimental results reveal the superiority of the PLVP in terms of precision, recall, F‐score and computational efficiency.

Advances in data storage and image acquisition technologies have enabled the creation of large image datasets. Thus, it is necessary to develop appropriate information systems to efficiently manage these datasets. Image classification and retrieval is one of the most important services that must be supported by such systems. The most common approach used is content-based image retrieval (CBIR) systems. This paper presents a new application of rough sets to feature reduction, classification, and retrieval for image databases in the framework of content-based image retrieval systems. The suggested approach combines image texture features with color features to form a powerful discriminating feature vector for each image. Texture features are extracted, represented, and normalized in an attribute vector, followed by a generation of rough set dependency rules from the real value attribute vector. The rough set reduction technique is applied to find all reducts with the minimal subset of attributes associated with a class label for classification