An efficient heuristic for selecting active nodes in wireless sensor networks

Profiling environmental parameter using a large number of spatially distributed wireless sensor network (WSN) NODEs is an extensive illustration of advanced modern technologies, but high power requirement for WSN NODEs limits the widespread deployment of these technologies. Currently, WSN NODEs are extensively powered up using batteries, but the battery has limitation of lifetime, power density, and environmental concerns. To overcome this issue, energy harvester (EH) is developed and presented in this paper. Solar-based EH has been identified as the most viable source of energy to be harvested for autonomous WSN NODEs. Besides, a novel chemical-based EH is reported as the potential secondary source for harvesting energy because of its uninterrupted availability. By integrating both solar-based EH and chemical-based EH, a hybrid energy harvester (HEH) is developed to power up WSN NODEs. Experimental results from the real-time deployment shows that, besides supporting the daily operation of WSN NODE and Router, the developed HEH is capable of producing a surplus of 971 mA·hr equivalent energy to be stored inside the storage for NODE and 528.24 mA·hr equivalent energy for Router, which is significantly enough for perpetual operation of autonomous WSN NODEs used in environmental parameter profiling.

Herein, an Internet of Things (IoT) system with remote reconfigurable wireless sensor network (WSN) nodes is presented and its application to measure group work activity in a classroom is discussed. This IoT system consists of wiki pages, bots, (defined as remotely controlled devices), gateways, and remotely reconfigurable WSN Nodes. The bots/gateways and WSN nodes of the IoT system are controlled by scripts written on wiki pages that are read by the bot/gateways, which then forward the commands contained in the scripts to the WSN nodes. Each WSN node then executes the commands, obtains the resulting sensor values, and then returns those values to the bot/gateways. The bot/gateways relay the values and write them onto the wiki page. Each WSN node is flexible and reconfigurable because its behavior can be changed by the script commands written onto the wiki page. Using this IoT system, we created a measurement system to evaluate activity levels of group work in a classroom. After developing the measurement system, we found it was possible to adjust the sampling rate for obtaining sensor values simply by rewriting the script on the wiki page without directly manipulating the WSN.

This paper is a performance survey on the residual energy of nodes in a wireless sensor network (WSN). Wireless sensor nodes are limited in application due to constraints in energy of nodes’ battery and addressing the problem of energy management is essential to lengthen the life of a deployed network of wireless sensors. In the method used, Sensor nodes were equally distributed on the complete border of the network field. An exclusive cluster, six hierarchical, and eighteen hierarchical clusters were formed based on even partition of the border of the network field. The choice of Cluster Head (CH) within each cluster formed was based on selection of a sensor node with minimal transmission distance to the Base Station. A comparison of the various hierarchical scenarios was simulated in MATLAB. The mean residue energies (MREs) after the network lifetime are 3%, 52%, and 35% of the initial node energy for single, six and eighteen hierarchical clusters respectively. The residual energies of sensor nodes above the recorded MREs were taken on a class interval of 50’s of the node identity (nid) and respective averages of residual energies of sensor nodes (AEr) of each selected class interval were evaluated. Based on the result, certain categories of sensor nodes at a section of the network field indicated that the battery energy of the affected nodes was not maximally utilized thereby leading to enormous residual energy. It was concluded that the residual energy of nodes in a WSN could be optimized to extend the lifetime.

Localization of mobile nodes in wireless sensor network gets more and more important, because many applications need to locate the source of incoming measurements as precise as possible. Many previous approaches to the location-estimation problem need know the theories and experiential signal propagation model and collect a large number of labeled samples. So, these approaches are coarse localization because of the inaccurate model, and to obtain such data requires great effort. In this paper, a semi-supervised manifold learning is used to estimate the locations of mobile nodes in a wireless sensor network. The algorithm is used to compute a subspace mapping function between the signal space and the physical space by using a small amount of labeled data and a large amount of unlabeled data. This mapping function can be used online to determine the location of mobile nodes in a sensor network based on the signals received. We use independent development nodes to setup the network in metallurgical industry environment, outdoor and indoor. Experimental results show that we can achieve a higher accuracy with much less calibration effort as compared with RADAR localization systems.

A Markov based unified model for energy harvesting nodes in wireless sensor networks is proposed. Using the presented model, the probability of event loss due to energy run out as well as an analytical vulnerability metric, namely average time to energy run-out, are derived. The results provide insight into the performance of energy harvesting nodes in wireless sensor networks as well as design requirements for such nodes. The proposed vulnerability metric can be used in the various harvesting aware techniques at different protocol layers.

Self-powered wireless sensor networks based on the radioisotope thermoelectric generator for aquatic temperature monitoring

Multihop transmission is one of the important techniques to overcome the transmission coverage of each node in wireless sensor networks (WSNs). However, multihop transmission has a security issue due to the nature of a wireless medium. Additionally, the eavesdropper also attempts to interrupt the legitimate users’ transmission. Thus, in this paper, we study the secrecy performance of a multihop transmission under various eavesdropping attacks for WSNs. To improve the secrecy performance, we propose two node selection schemes in each cluster, namely, minimum node selection (MNS) and optimal node selection (ONS) schemes. To exploit the impact of the network parameters on the secrecy performance, we derive the closed-form expression of the secrecy outage probability (SOP) under different eavesdropping attacks. From the numerical results, the ONS scheme shows the most robust secrecy performance compared with the other schemes. However, the ONS scheme requires a lot of channel information to select the node in each cluster and transmit information. On the other side, the MNS scheme can reduce the amount of channel information compared with the ONS scheme, while the MNS scheme still provides secure transmission. In addition, the impact of the network parameters on the secrecy performance is also insightfully discussed in this paper. Moreover, we evaluate the trade-off of the proposed schemes between secrecy performance and computational complexity.

The accurate estimations of distances among nodes in wireless sensor networks(WSN) are premises for the accurate estimations of nodes' positions and the accurate reconstruction of the networks' topology. In a complex environment, nodes stochastically move, and the variance of state noise is unknown and variable, and obstacles possibly exist among nodes. Now, the accurate estimations of distances among nodes in the WSN in a complex environment are still unresolved. In this paper, an adaptive Kalman filter(AKF) is used to solve the accurate estimations of distances among nodes in the WSN. Through simulations, the results indicate that the AKF is capable of accurate estimations of distances among nodes. Therefore, the AKF is a very effective method to solve the accurate estimations of distances among nodes in the WSN in a complex environment.

Most of the proposed algorithms focus on static networks of sensors with either static or mobile anchors, in which the Monte Carlo localization algorithm is a typical one for localizing nodes in a mobile wireless sensor network. But the radio range being all different or inconstant in this algorithm leads to reduce the accuracy of localization and the efficiency of the algorithm itself. In this article, we propose the novel rang-based stochastic Monte Carlo localization algorithm for wireless sensor networks specifically designed with mobility to improve the accuracy of localization by dealing with the different radio ranges of sensors, and being bound to the narrow sampling area. Our simulation experimental results show that the rang-based stochastic Monte Carlo localization algorithm has improved the accuracy and stability of the estimated locations.

The sensor nodes are independent and work as sender, receiver and intermediate node in Wireless Sensor Network (WSN). The sensor nodes are forming the small network in which the one or more sender is sending data to one destination/s through intermediate nodes or sending information to Base Station (BS). The information collect by base station is further analyzed. The nodes are also static or mobile depends on the situation or conditions. The connection establishment and data sending is possible through routing protocols of WSN. The routing protocols of WSN are not same as traditional wireless routing protocols. One major issue on this network is security. The routing protocols are sending information to destination from particular source and the routing strategy is provides the better way of delivery in the network. The sensor nodes in network are performing through limited battery supply called node energy or power. The attacker are also affected the limited energy resource. In this paper the center of consideration is on the security issues related to WSN routing protocols. The routing in WSN remains a key issue because of that without accurately functioning of routing protocols, the network cleanly will not work the technique it's intended to. Unfortunately, routing also one of the most difficult to protect against attacks malicious activities because of the administration in WSN. The better protection scheme is provides the complete security from attacks and the secure routing is provides the better and trustful network performance.

A scheme for WSNs (wireless sensor networks) security is given by dividing sensing tetrahedron into clusters and using the symmetric polynomials in this paper.The sensing tetrahedron is divided into a number of small grids.All those sensor nodes, both ordinary sensor nodes and heterogeneous sensor nodes are distributed in the sensing tetrahedron.In a grid, all ordinary sensor nodes and heterogeneous sensor nodes establish their shared keys through using the symmetric polynomials.All the heterogeneous sensor nodes establish their shared keys through using the symmetric polynomials.At last, all sensor nodes establish their keys directly or indirectly in the whole sensing tetrahedron.Analysis and comparison demonstrate this scheme enhances the WSN security, has good network connectivity, saves node storage, reduces network computing load, and extends the network lifetime.

Aggregating data of several nodes in a wireless sensor networks allows us to accurately monitor a remote environment. The aim of this paper is to introduce a new protocol to reduce overall power consumption, extend network life time, and support mobile nodes in wireless sensor networks. The protocol presented here is EPMPAC (efficient power management protocol with adaptive clustering), a cluster-based protocol that distributes energy load by partitioning network to adaptive local clusters with an organizer in each. Mobility management is a salient feature of this protocol that ensures reliable communication between mobile and static nodes. Simulation results show a better performance of EPMPAC as compared to the conventional protocols.

The sensor nodes in wireless sensor network (WSN) come with limited battery life, thus energy usage in WSN is to be handled with great care. The routing protocols are the major research area to work on the QoS of the network such as network lifetime, scalability, energy consumption, packet overhead, etc. Since sensor node posses limited battery life, to use nodes efficiently yet not loosing connectivity in the network becomes a major issue in designing the routing protocols. To achieve energy efficiency and better network lifetime, grouping of sensor nodes into small clusters and selecting one cluster head seems to have more advantages in comparison with other network models to get better scalability, robustness and end-to-end data delivery. In this paper, we have discussed and studied the different energy-efficient routing protocols for clustering of sensor nodes in wireless sensor network, its merits, demerits and applications.

Indoor air quality (IAQ) is a term that describes the air quality of the building occupants. IAQ can be influenced by physical factors like dust particles, chemical or gaseous pollutants (including carbon dioxide, carbon monoxide and volatile organic compounds) and biological factors like molds and bacteria growth which largely depend on temperature and humidity condition of a room. These kinds of pollutants can induce a bad health effects to building occupants. In this study, a web-based system for monitoring indoor air quality is presented. The system has been developed to monitor the environmental parameters of air quality like gaseous pollutants, particulate matter, temperature and humidity that can affect the occupant's comfort, health and indoor work environment if not properly maintained. Generally, the system consists of a desktop computer acting as base station, an array of metal oxide gas sensor, temperature and humidity sensor, particle dust sensor and wireless sensor network (WSN) node as a wireless transmitter. The measured data from sensors are sent to base station via WSN node. The computer will log the collected data using a self-developed server program which can be accessed through the web.

In this letter, we propose two novel dynamic duty-cycle scheduling schemes (called DSR and DSP) in order to reduce sleep latency, while achieving balanced energy consumption among sensor nodes in wireless sensor networks (WSNs) with energy harvesting capability. In DSR, each sensor node is allowed to adjust its duty-cycle according to the current amount of residual energy only. Since the residual energy of nodes in energy-harvesting WSNs can increase over time due to their harvesting opportunity, the estimation of prospective increase in their residual energy is useful to achieve our goal. Hence, DSP allows each of sensor nodes to reduce its duty-cycle more aggressively in proportion to such an increase. Through NS-2 simulations, we verified that our proposed schemes outperform the duty-cycle scheduling scheme used in a representative existing MAC protocol such as RI-MAC.