An efficient Multi-Parent Hierarchical routing protocol for WSNs

Wireless sensor networks congestion occurs easily due to its centralized traffic pattern. Normally, mono-sync wireless sensor network experiences multiple traffic flow congestion in the dense environment of the network, which leads to excess energy consumption and severe packet loss. To overcome these issues, a congestion detection and alleviation mechanism using cluster based heuristic optimized hierarchical routing protocol is proposed in this paper. Here, congestion detection and alleviation utilize the features of sensor nodes. The congestion is categorized into two types: (i) node level congestion and (ii) link level congestion. The node level congestion is detected by assessing the buffer utilization and the interval amid the consecutive data packets. The link level congestion is considered with computing link usage utilizing back-off step of round robin carrier sense multi-access with collision avoidance. Congestion detection and alleviation reactively affected node/link through cuckoo hosted rider search multi-hop routing algorithm. It has two phases: the cluster head selection and multi-path routing. Cluster head selection is performed through Taylor multiple random forest kernel fuzzy C-means clustering algorithm and multi-path routing is performed through cuckoo hosted rider search multi-hop routing algorithm. The simulation of the proposed method is done in network simulator tool. Here, the performance metrics, like packet delivery ratio, delay, energy consumption, packet drop, overhead, network lifetime and throughput are calculated. The experimental outcomes of the proposed technique shows 11.6%, 18.4% and 28.1% lower delay, 78.2%, 65.4% and 52.6% higher packet delivery ratio, and 29.2%, 37.4% and 40.8% lower packet drop compared with the existing methods, like congestion detection and alleviation using multi-attribute decision-making in optimization-based hybrid congestion alleviation routing protocol in wireless sensor networks, congestion detection and alleviation using hybrid K-means with greedy best first search algorithms in packet rate reduction utilizing adaptive weight firefly algorithm ant colony optimization based routing protocol in wireless sensor networks and congestion detection and alleviation using multi-input time on task optimization algorithm for altered gravitational search algorithm routing protocol in wireless sensor networks.

The existing routing protocols for wireless sensor networks were not reasonable in design, which limited their application. Most of the existing studies did not take into account the energy consumption of the network and the balanced use of the energy of sensor nodes, which led to the unsatisfactory application effect of wireless sensor networks in some fields. Therefore, from the perspective of energy balance in wireless sensor networks, this paper proposed a construction method of an energy balance routing protocol in wireless sensor networks based on a fuzzy control strategy. Firstly, based on the analysis of the basic composition of wireless sensor networks and the structure of sensor nodes, this paper expounded the basic process of wireless data transmission and summarized the classification and characteristics of routing protocols in wireless sensor networks from different angles. Secondly, according to the node data transmission characteristics of wireless sensor networks, the energy balance use model of sensor nodes was established, and the design method of the energy balance routing protocol based on fuzzy control strategy was proposed, and the data transmission link was optimized. Finally, through experimental comparative analysis, the results showed that the energy balanced routing protocol proposed in this paper can effectively realize the energy balanced use of the network data transmission process. Compared with other common routing protocols, the wireless sensor network routing protocol proposed in this paper can not only improve the data transmission efficiency and reduce the data redundancy but also save energy consumption and prolong the network running time. The design method of routing protocol proposed in this paper will be conducive to the optimization and application of routing protocol in wireless sensor networks and provide a theoretical basis for the related research of wireless sensor networks.

A genetic algorithm based distance-aware routing protocol for wireless sensor networks

Wireless Sensor Networks (WSNs) play a necessary position in todays actual world applications. WSNs are a team of autonomous sensor nodes that are geographically distributed to accumulate information and monitor events. WSNs are similarly sense that they rely on wireless connectivity and spontaneous formation of networks so that sensor information can be transported via wireless. Sometimes called dust network, minute sensors as small as dust referring to smart dust. WSNs are spatially distributed two to screen or bodily temperature, sound, pressure, etc. and to cooperatively ignore their data via the network to different locations. Each such sensor network node has typically various parts. Routing in WSNs in one of the important technique, because all node executes its battery power, if may be one node failure it collapse entire networks. Routing in WSNs is in reality difficult due to the intrinsic characteristics that differentiate these networks from different networks. The plan of routing protocols in WSN is affected via number of exigent factors. In this paper, a review on routing protocols for Wireless Sensor Networks (WSNs) and performance of its execution.

Due to miniaturization of hardware and availability of low-cost, low-power sensors, Wireless Sensor Network and Multimedia Sensor Network applications are increasing day by day. Each application has a specific quality of service and experience requirements. The design of routing and MAC protocol which can fulfill the requirements of the application is challenging given the constrained nature of these devices. Considerable efforts are directed towards the design of energy efficient QoS-aware routing protocols. In this article, we present state of the art review of routing protocols for Wireless Multimedia Sensor Networks while addressing the challenges and providing insight into research issues.

<span lang="EN-US">Recent developments and widespread in wireless sensor network have led to many routing protocols, many of these protocols consider the efficiency of energy as the ultimate factor to maximize the WSN lifetime. The quality of Service (QoS) requirements for different applications of wireless sensor networks has posed additional challenges. Imaging and data transmission needs both QoS aware routing and energy to ensure the efficient use of sensors. In this paper, we propose an Efficient, Energy-Aware, Least Cost, (ECQSR) quality of service routing protocol for sensor networks which can run efficiently with best-effort traffic processing. The protocol aims to maximize the lifetime of the network out of balancing energy consumption across multiple nodes, by using the concept of service differentiation, finding lower cost by finding the shortest path using nearest neighbor algorithm (NN), also put certain constraints on the delay of the path for real-time data from where link cost that captures energy nodes reserve, energy of the transmission, error rate and other parameters. The results show that the proposed protocol improves the network lifetime and low power consumption.</span>

In this paper we present the analysis and comparison of routing protocols in Wireless Sensor Network (WSN) under 802.15.4, in order to determine which one has better stability, performance and energy consumption as the network size increases. Routing protocols are described. Network topologies of 20, 40, 60, 80 and 100 nodes were simulated using Qualnet software; with the results obtained, we analyzed all the data, compared the different metrics at the application, network, Medium Access Control (MAC) and physical layers. It was determined that the Ad-hoc On-demand Distance Vector (AODV) routing protocol is the one that adapts best to applications with requirements of low transfer rate and limited energy resources.

QoSNET: An integrated QoS network for routing protocols in large scale wireless sensor networks

Wireless Sensor Networks, referred to as WSNs, are made up of various types of sensor nodes. Recent developments in micro electro-mechanical technology have given rise to new integrated circuitry, microprocessor hardware and nano technology, wireless technology, and advanced networking routing protocols. Hospitals and health service facilities, the armed forces, and even residential customers represent a potential huge market for these devices. The problem is that existing sensor network nodes are incapable of providing the support needed to maximize usage of wireless technology. For this reason, there are many novel routing protocols for the wireless sensor networks proposed recently. One is Hierarchical or cluster-based routing. In this paper, we analyze three different types of hierarchical routing protocols: Low Energy Adaptive Clustering Hierarchy (LEACH), Power-Efficient Gathering in Sensor Information Systems (PEGASIS), and Virtual Grid Architecture (VGA). We tried to analyze the performance of these protocols, including the power consumption and overall network performance. We also compared the routing protocol together. This comparison reveals the important features that need to be taken into consideration while designing and evaluating new routing protocols for sensor networks. The simulation results, using same limited sensing range value, show that PEGASIS outperforms all other protocols while LEACH has better performance than VGA. Furthermore, the paper investigates the power consumption for all protocols. On the average, VGA has the worst power consumption when the sensing range is limited, while VGA is the best when the sensing range is increased. Using homogeneous nodes can greatly prolong sensor network’s life time. Also, The network lifetime increases as the number of clusters decreases

Due to open network nature of wireless sensor networks make them highly vulnerable to a variety of security attacks and easy target for adversaries, which may capture these nodes, analyze and easily insert fake route information. Wireless sensor network is an emerging, cost effective and unsupervised solution for collecting this information from the physical world and sending this information back to centralized authority for further processing. GRPW (Geographic Routing in connected wireless sensor networks based on Multiple Sinks) is one of the basic routing protocols used for Supporting Mobile Sinks in Wireless Sensor Networks. GRPW, a geographical routing protocol for wireless sensor networks, is based on an architecture partitioned by logical levels, on the other hand based on a multipoint relaying flooding technique to reduce the number of topology broadcast. GRPW-MuS uses periodic HELLO packets to neighbor detection. The wormhole attack can form a serious threat in wireless sensor networks, especially against many wireless sensor networks routing protocols and location-based wireless security systems. Here, a trust model to handle this attack in GRPW is provided called GRPW-MuS-s. Using OMNET++ simulation and the MiXiM framework, results show that GRPW-MuS-s protocol only has very small false positives for wormhole detection during the neighbor discovery process (less than GRPW). The average energy usage at each node for GRPW-MuS-s protocol during the neighbor discovery and route discovery is very low than GRPW-MuS, which is much lower than the available energy at each node. The cost analysis shows that GRPW-MuS-s protocol only needs small memory usage at each node, which is suitable for the sensor network.

Wireless sensor networks, a distributed network of sensor nodes perform critical tasks in many application areas such as target tracking in military applications, detection of catastrophic events, environment monitoring, health applications etc. The routing protocols developed for these distributed sensor networks need to be energy efficient and scalable. To create a better understanding of the performance of various routing protocols proposed it is very important to perform a detailed analysis of them. Network simulators enable us to study the performance and behavior of these protocols on various network topologies. Many Sensor Network frameworks were developed to explore both the networking issues and the distributed computing aspects of wireless sensor networks. The current work of simulation study of routing protocols is done on SensorSimulator, a discrete event simulation framework developed at Sensor Networks Research Laboratory, LSU and on a popular event driven network simulator ns2 developed at UC Berkeley. SensorSimulator is a discrete event simulation framework for sensor networks built over OMNeT++ (Objective Modular Network Test-bed in C++). This framework allows the user to debug and test software for distributed sensor networks. SensorSimulator allows developers and researchers in the area of Sensor Networks to investigate topological, phenomenological, networking, robustness and scaling issues, to explore arbitrary algorithms for distributed sensors, and to defeat those algorithms through simulated failure. The framework has modules for all the layers of a Sensor Network Protocol stack. This thesis is focused on the simulation and performance evaluation of various routing protocols on SensorSimulator and ns2. The performance of the simulator is validated with a comparative study of Directed Diffusion Routing Protocol on both ns2 and SensorSimulator. Then the simulations are done to evaluate the performance of Optimized Broadcast Protocols for Sensor Networks, Efficient Coordination Protocol for Wireless Sensor Networks on SensorSimulator. Also a performance study of Random Asynchronous Wakeup protocol for Sensor Networks is done on ns2.

A Wireless Sensor Network (WSN) is a special kind of ad hoc network with distributed sensing and processing capability. Routing protocols for wireless sensor networks are responsible for maintaining the routes in the network and have to ensure reliable multi-hop communication. Studies from 2006 until early 2015 distinguished three categories of routing protocols i.e., network structure, routing paradigms and initiator of communication. The routing protocols belonging to the first category further classified as flat, hierarchical and location based routing protocols, the routing paradigms classified as single path and multipath and the initiator of communication classified into source initiator and destination initiator routing protocols. The operations of representative members from each category are described and the comparative analyses of the performance of each routing protocol are presented. A literature has been extensively studied to highlight the properties and limitations of existing routing protocols and future research issues, which helps to improve the routing protocols for another domain.

Increasingly, the services operations which perform data sensing and data propagation in a dynamic environment are important tasks of wireless sensor networks. Therefore, increasing the network lifetime is the main contribution of this investigation. We propose a novel power-aware chessboard-based adaptive routing (PCAR) protocol to support immobility management in wireless sensor networks. The paramount design challenge in this work is to scale-down the network energy consumption, thus maximizing the network lifetime. Our PCAR protocol utilizes vector-oriented propagation, power-consideration decision, and multi-path routing protocols to guide the propagating data to its destination. Moreover, the properties of the clusters are combined in the PCAR to form the cluster-plates in a chessboard-based clustered sensor network. The alternate usage of cluster-head nodes and sleep nodes increases energy efficiency. The opportune divide-and-conquer multi-path fusion mechanism slows down and balances energy consumption. Finally, a performance analysis shows that energy efficiency is achieved by the PCAR protocol.

In hierarchical networks, nodes are separated to play different roles such as CHs and cluster members. Each CH collects data from the cluster members within its cluster, aggregates the data and then transmits the data to the sink. Each algorithm that is used for packet routing in quality of service (QoS) based applications should be able to establish a tradeoffs between end to end delay parameter and energy consumption. Therefore, enabling QoS applications in sensor networks requires energy and QoS awareness in different layers of the protocol stack. We propose an Energy efficient and QoS based Multi-path Hierarchical Routing Protocol in wireless sensor networks namely EQMH. In this protocol, we try to satisfy the QoS requirements with the minimum energy via hierarchical methods. Our routing protocol performs cluster heads election and routes discovery using multiple criteria such as residual energy, remaining buffer size, signal-to-noise ratio and distance to sink. EQMH maximizes the network lifetime through data transmission across multiple paths as load balancing that causes energy consume uniformly throughout the network. Furthermore employs a queuing model to handle both real-time and non-real-time traffic. Simulation results show that our proposed protocol is more efficient than EAP and MCMP protocols in providing QoS requirements and minimizing energy consumption.

A WSN (Wireless Sensor Network) is made out of various number of hubs each of which comprise of detecting gadgets or sensing device to gather information from environment. These detecting gadgets are given processing unit to perform operations on information. These gadgets are conveyed arbitrarily in remote environment, because of which battery charging or substitution is not viewed as down to earth. Because of the progression in wireless environment, WSN is being utilized as a part of various zones like: military, civilian, and modern applications. A Wireless Sensor Network is a type of network which is shaped by expansive number of various sensor hubs which are arbitrarily a locale conveyed. An issue of constrained wellspring of energy as the source of power in the hub and due to the fact battery of hub cannot be supplanted or displaced. Lifespan of the WSN is especially subject to the battery life of every sensor hub. As hub does the detection and sends the information to the sink node from surrounding environment, thus in the WSN routing plans which is used for information sending needs to be productive as well as effectively use the force in battery of sensor hub that should be used to build the system lifespan. An energy optimistic routing protocol is the real worry in field of WSN. In this paper, a recent study of the Low Energy Adaptive Clustering Hierarchy abbreviated as LEACH and its various routing protocols with pros as well as cons. Researchers and Specialists have been attempting in create routing systems which improves the lifetime of WSN. Furthermore, correlation of these routing protocols on different assumptions is done.