An Energy and Distance Aware Data Dissemination Protocol Based on SPIN in Wireless Sensor Networks

Data dissemination from multiple sources to mobile sinks is fundamental and challenging in WSN applications due to limited energy supply of sensor nodes and sink mobility. Previous data dissemination protocols either rely on an energy-consuming coordinate system or build an inefficient backbone. In this paper, we propose a hierarchical role-based data dissemination (HRDD) protocol in wireless sensor networks. In HRDD, a small number of sensor nodes are assigned to serve as cluster heads and agents to form the data dissemination backbone and mitigate unnecessary query forwarding. In addition, HRDD designs an efficient data delivery mechanism that provides shorter paths to accelerate data delivery as well as reduce the number of data transmissions. An adaptive backbone maintenance mechanism is also introduced for low-energy cluster heads and agents to reduce their load, thereby prolonging the network lifetime. The experimental results show that HRDD achieves the longer network lifetime, the shorter delay, and the high success ratio compared to the prior work.

Wireless sensor networks congestion occurs easily due to its centralized traffic pattern. Normally, mono-sync wireless sensor network experiences multiple traffic flow congestion in the dense environment of the network, which leads to excess energy consumption and severe packet loss. To overcome these issues, a congestion detection and alleviation mechanism using cluster based heuristic optimized hierarchical routing protocol is proposed in this paper. Here, congestion detection and alleviation utilize the features of sensor nodes. The congestion is categorized into two types: (i) node level congestion and (ii) link level congestion. The node level congestion is detected by assessing the buffer utilization and the interval amid the consecutive data packets. The link level congestion is considered with computing link usage utilizing back-off step of round robin carrier sense multi-access with collision avoidance. Congestion detection and alleviation reactively affected node/link through cuckoo hosted rider search multi-hop routing algorithm. It has two phases: the cluster head selection and multi-path routing. Cluster head selection is performed through Taylor multiple random forest kernel fuzzy C-means clustering algorithm and multi-path routing is performed through cuckoo hosted rider search multi-hop routing algorithm. The simulation of the proposed method is done in network simulator tool. Here, the performance metrics, like packet delivery ratio, delay, energy consumption, packet drop, overhead, network lifetime and throughput are calculated. The experimental outcomes of the proposed technique shows 11.6%, 18.4% and 28.1% lower delay, 78.2%, 65.4% and 52.6% higher packet delivery ratio, and 29.2%, 37.4% and 40.8% lower packet drop compared with the existing methods, like congestion detection and alleviation using multi-attribute decision-making in optimization-based hybrid congestion alleviation routing protocol in wireless sensor networks, congestion detection and alleviation using hybrid K-means with greedy best first search algorithms in packet rate reduction utilizing adaptive weight firefly algorithm ant colony optimization based routing protocol in wireless sensor networks and congestion detection and alleviation using multi-input time on task optimization algorithm for altered gravitational search algorithm routing protocol in wireless sensor networks.

QoSNET: An integrated QoS network for routing protocols in large scale wireless sensor networks

Wireless sensor networks have drawn tremendous attentions from all fields because of their wide application. Maximizing network lifetime is one of the main problems in wireless sensor networks. This article proposes an energy-efficient routing protocol which adopts unequal clustering technology to solve the hot spots problem and proposes double cluster head strategy to reduce the energy consumption of head nodes in the clusters. In addition, to balance the energy consumption between cluster heads and cluster members, a hybrid cluster head rotation strategy based on time-driven and energy-driven is proposed, which can make the timing of rotation more reasonable and the energy consumption more efficient. Finally, we compare the proposed protocol with LEACH, DEBUC, and UCNPD by simulation experiments. The simulation results prove that our proposed protocol can effectively improve the performance in terms of network lifetime, energy consumption, energy balance, stability, and throughput.

Design of conventional protocols for wireless sensor networks(WSN) are mainly based on energy management. The solutions for layered protocol of the WSN network are inefficient as sensors network mainly delivers real-time content thus, cross layer communication between layers of the protocol stack is highly required. In this paper, a reliable cross layer routing scheme (CL - RS) is proposed to balance energy to achieve prolonged lifetime through controlled utilization of limited energy. CL - RS considers 2 adjacent layers namely, MAC layer and network layer. Optimization issues are identified in these two layers and solutions are provided to reduce energy consumption thereby increasing network lifetime. To achieve higher energy efficiency MAC layer protocols compromise on packet latency. It is essential to attempt reduce the end-to-end delay and energy consumption using low duty cycle cross layer MAC (CL-MAC). The joint optimization design is formulated as a linear programming problem. The network is partitioned into four request zones to enable increase in network performance by using an appropriate duty cycle and routing scheme. We demonstrate by simulations that the strategy designed by combining (CL - RS) and (CL-MAC) algorithms at each layer significantly increases the network lifetime and a relation exists between the network lifetime maximization and the reliability constraint. We evaluate the performance of the proposed scheme under different scenarios using ns-2. Experimental results shows that proposed scheme outperforms the layered AODV in terms of packet loss ratio, end-to-end delay, control overhead and energy consumption.

Energy saving to prolong the network life is an important design issue while developing a new routing protocol for wireless sensor network. Clustering is a key technique for this and helps in maximizing the network lifetime and scalability. Most of the routing and data dissemination protocols of WSN assume a homogeneous network architecture, in which all sensors have the same capabilities in terms of battery power, communication, sensing, storage, and processing. Recently, there has been an interest in heterogeneous sensor networks, especially for real deployments. This research paper has proposed a new energy aware clustering protocol (EACP) for heterogeneous wireless sensor networks. Heterogeneity is introduced in EACP by using two types of nodes: normal and advanced. In EACP cluster heads for normal nodes are elected with the help of a probability scheme based on residual and average energy of the normal nodes. This will ensure that only the high residual normal nodes can become the cluster head in a round. Advanced nodes use a separate probability based scheme for cluster head election and they will further act as a gateway for normal cluster heads and transmit their data load to base station when they are not doing the duty of a cluster head. Finally a sleep state is suggested for some sensor nodes during cluster formation phase to save network energy. The performance of EACP is compared with SEP and simulation result shows the better result for stability period, network life and energy saving than SEP.

HashQuery, a Hash-area-based data dissemination protocol, was designed in wireless sensor networks. Using a Hash function which uses time as the key, both mobile sinks and sensors can determine the same Hash area. The sensors can send the information about the events that they monitor to the Hash area and the mobile sinks need only to query that area instead of flooding among the whole network, and thus much energy can be saved. In addition, the location of the Hash area changes over time so as to balance the energy consumption in the whole network. Theoretical analysis shows that the proposed protocol can be energy-efficient and simulation studies further show that when there are 5 sources and 5 sinks in the network, it can save at least 50% energy compared with the existing two-tier data dissemination(TTDD) protocol, especially in large-scale wireless sensor networks.

Wireless sensor networks (WSNs) are composed of many low cost, low power devices with sensing, local processing and wireless communication capabilities. Recent advances in wireless networks have led to many new protocols specifically designed for WSNs where energy awareness is an essential consideration. Most of the attention, however, has been given to the routing protocols since they might differ depending on the application and network architecture. Minimizing energy dissipation and maximizing network lifetime are important issues in the design of routing protocols for WSNs. In this paper, the low-energy adaptive clustering hierarchy (LEACH) routing protocol is considered and improved. We propose a clustering routing protocol named intra-balanced LEACH (IBLEACH), which extends LEACH protocol by balancing the energy consumption in the network. The simulation results show that IBLEACH outperforms LEACH and the existing improvements of LEACH in terms of network lifetime and energy consumption minimization.

Decrease energy consumption and maximizing network lifetime are important parameters in designing and protocols for wireless sensor network (WSN).Clustering is one of the efficientmethods in energy consumption by Cluster-Head in WSN. Besides, CH can process and aggregate data sent by cluster members, thus reducing network traffic for sending data to sink. In this paper presents a new cluster routing algorithm by dividing network into grids. In each grid computes the center-gravity and threshold of energy for selecting the node that has the best condition base on these parameters in grid for selecting Cluster-Head in current round, also SLGC selecting Cluster -Heads for next rounds thereby this CHs reduce the volume of controlling messages for next rou nds and inform nodes for sending data into CH of respective round. This algorithm prolong network lifetime and decrease energy consumption by selecting CH in grid and sending data of grid to sink by this CH. Result of simulation shows that SLGC algorithm i n comparison with the previous clustering algorithm has maximizing network lifetime and decrease energy consumption in network.

CMSTR: A Constrained Minimum Spanning Tree Based Routing Protocol for Wireless Sensor Networks

Wireless Sensor Network has emerged as an important technology of the future due to its potential for application across a wide array of domains. The collaborative power of numerous autonomousremote sensing nodes self configured into a multi hop network permits in-depth accurate observation of any physical phenomenon. A stringent set of computational and resource constraints make the design and implementation of sensor networks an arduous task. The issue of optimizing the limited and often non-renewable energy of sensor nodes due to its direct impact on network lifetime dominates every aspect of wireless sensor networks. Existing techniques for optimizing energy consumption are based on exploiting node redundancy, adaptive radio transmission power and topology control. Topology control protocols significantly impact network lifetime, routing algorithms and connectivity. We classify sensor nodes as strong and weak nodes based on their residual energy and propose a novel topology control protocol (NEC) which extends network lifetime while guarantying minimum connectivity. Extensive simulations in Network-Simulator (ns-2) show that our protocol outperforms the existing protocols in terms of various performance metrics. We further explore the effectiveness of data aggregation paradigm as a solution to the dominant problem of maximizing energy utilization and increasing network bandwidth utilization in sensor networks. We propose a novel energy efficient data aggregation protocol based on the well-known k-Means algorithm. Our protocol achieves energy efficiency by reduced number of data transmissions at each level of a hierarchical sensor network. Our protocol exploits the spatial and temporal coherence between the data sensed by neighboring sensor nodes in a cluster to reduce the number of packet transmissions. Sensor nodes apply k-Means algorithm to the raw data to generate a reduced set of mean values and forward this modified data set to cluster-head nodes. We further prove the effectiveness of our protocol in providing increased energy conservation in the network by extensive simulation results.

In wireless sensor networks, MAC protocol is used to achieve efficient, fair and balanced allocation of wireless channel resources and access control of nodes in the network, and to control the communication process of nodes in the network. The energy consumption of wireless sensor nodes is mainly concentrated in the communication unit, including: data transceiver, idle listening, protocol control overhead, etc. A good MAC protocol is beneficial to reduce unnecessary energy consumption and enhance node life time. At the same time, MAC protocol, as the bottom protocol of wireless sensor network, provides a stable and reliable communication foundation for the realization of the upper protocol. Therefore, a large number of scholars at home and abroad have carried out extensive and in-depth research on MAC layer protocol of network. In this paper, the research process and progress of MAC layer protocol in wireless sensor networks are analyzed, and the research progress of MAC layer protocol in multi-radio frequency and multi-channel wireless sensor networks is analyzed.

One of the most important topics in the field of wireless sensor networks is the development of approaches to improve network lifetime. In this paper, an energy-efficient control and routing protocol for wireless sensor networks is presented. This algorithm is based on reinforcement learning for energy management in the network. This protocol seeks to optimize routing policies to maximize the long-term reward received by each node, using reinforcement learning, which is a machine learning approach. In order to improve the lifetime of wireless sensor network, three energy management approaches have been proposed. The first approach is to navigate correctly using reinforcement learning to reduce the length of the routes and to improve energy consumption. The second approach is to exploit a sleep scheduling technique to improve node energy consumption. The last approach is used to restrict data transmission of each node based on the received data change rate. Simulation results show that in terms of network lifespan, the proposed method significantly outperforms previous reported methods.

Among important issues in the current energy-efficient routing protocols for wireless sensor networks (WSNs) based on clustering approaches are how to determine the optimal number of clusters, how to generate clusters and how select cluster-heads to improve WSNs performance. These approaches aim to reduce energy consumption of the WSN nodes and to extend the network lifetime. This paper reviews and compares the performance of three clustering techniques for determining number of clusters: rule of thumb, elbow, and silhouette. Each of these techniques involves a distributed K-means approach to generate clusters. Moreover, we compare these three clustering methods with low energy adaptive clustering hierarchy (LEACH), Imp LEACH and MODLEACH in terms of network lifetime, energy consumption and the number of packets sent to the base station (BS). The results obtained indicate that rule of thumb method provides better performance compared to other clustering techniques in terms of energy consumption and network lifetime.

The existing routing protocols for wireless sensor networks were not reasonable in design, which limited their application. Most of the existing studies did not take into account the energy consumption of the network and the balanced use of the energy of sensor nodes, which led to the unsatisfactory application effect of wireless sensor networks in some fields. Therefore, from the perspective of energy balance in wireless sensor networks, this paper proposed a construction method of an energy balance routing protocol in wireless sensor networks based on a fuzzy control strategy. Firstly, based on the analysis of the basic composition of wireless sensor networks and the structure of sensor nodes, this paper expounded the basic process of wireless data transmission and summarized the classification and characteristics of routing protocols in wireless sensor networks from different angles. Secondly, according to the node data transmission characteristics of wireless sensor networks, the energy balance use model of sensor nodes was established, and the design method of the energy balance routing protocol based on fuzzy control strategy was proposed, and the data transmission link was optimized. Finally, through experimental comparative analysis, the results showed that the energy balanced routing protocol proposed in this paper can effectively realize the energy balanced use of the network data transmission process. Compared with other common routing protocols, the wireless sensor network routing protocol proposed in this paper can not only improve the data transmission efficiency and reduce the data redundancy but also save energy consumption and prolong the network running time. The design method of routing protocol proposed in this paper will be conducive to the optimization and application of routing protocol in wireless sensor networks and provide a theoretical basis for the related research of wireless sensor networks.