An Energy-Efficient Task Scheduling Method for CPU-GPU Heterogeneous Cloud

The rapid growth of cloud computing has led to the widespread adoption of heterogeneous virtualized environments, offering scalable and flexible resources to meet diverse user demands. However, the increasing complexity and variability in workload characteristics pose significant challenges in optimizing energy consumption. Many scheduling algorithms have been suggested to address this. Therefore, a self-attention-based progressive generative adversarial network optimized with Dwarf Mongoose algorithm adopted Energy and Deadline Aware Scheduling in heterogeneous virtualized cloud computing (SAPGAN-DMA-DAS-HVCC) is proposed in this paper. Here, a self-attention based progressive generative adversarial network (SAPGAN) is proposed to schedule activities in a cloud environment with an objective function of makespan and energy consumption. Then Dwarf Mongoose algorithm is proposed to optimize the weight parameters of SAPGAN. Outcome of proposed approach SAPGAN-DMA-DAS-HVCC contains 32.77%, 34.83% and 35.76% higher right skewed makespan, 31.52%, 33.28% and 29.14% lower cost when analysed to the existing models, like task scheduling in heterogeneous cloud environment utilizing mean grey wolf optimization approach, energy and performance-efficient task scheduling in heterogeneous virtualized Energy and Performance Efficient Task Scheduling Algorithm, energy and make span aware scheduling of deadline sensitive tasks on the cloud environment, respectively.

Energy consumption is the result of interactions between hardware, software, users, and the application environment. Optimisation of energy consumption has become crucial, and energy is considered a critical resource, so it is important to know and understand both how energy is measured and consumed on mobile devices. An accurate knowledge will allow us to develop efficient solutions to reduce energy consumption in order to improve the user experience. In this paper, we propose an experimental methodology to build a model of the energy consumption of mobile applications. Based on precise measurements, we elaborate predictive models of energy consumption for both unconnected and connected applications.

As people's requirements for energy saving and emission reduction continue to increase, the issue of energy consumption in buildings has received more and more attention. How to efficiently optimise the energy consumption of green buildings has become an important research goal in the field of energy consumption analysis and architectural design. This study, aiming at the energy consumption problem in green buildings, designs a method based on gravitational search algorithm (GSA) to optimise energy consumption. First, sensor data of equipment in the building is collected. Then, a multi-objective optimisation model is constructed to ensure that the final goal is the lowest energy consumption without reducing comfort. The final experimental results show that the overall building energy use decreased by 33.8% because the GSA algorithm can effectively reduce the overall energy consumption of building equipment and meets the requirements for energy consumption optimisation in green buildings.

Reduction of energy consumption is important for reaching a sustainable future. This paper presents a novel method for optimizing the energy consumption of robotic manufacturing systems. The method embeds detailed evaluations of robots' energy consumptions into a scheduling model of the overall system. The energy consumption for each operation is modeled and parameterized as function of the operation execution time, and the energy-optimal schedule is derived by solving a mixed-integer nonlinear programming problem. The objective function for the optimization problem is then the total energy consumption for the overall system. A case study of a sample robotic manufacturing system and an experiment on an industrial robot are presented. They show that there exists a real possibility for a significant reduction of the energy consumption in comparison to state-of-the-art scheduling approaches. Note to Practitioners-The motivation for this work is the great interest of companies on energy consumption optimization, looking for cost reduction and sustainability in manufacturing. Existing optimization methods focus on different levels of details. A high-level model would be able to optimize the overall system. Unfortunately, due to the high computational cost, it can hardly consider the deep level of mechanical and electrical parameters, which determine the real energy consumption. This paper presents a novel method to embed detailed energy consumption models into a scheduling optimization problem. An effective parameterization of the time variables reduces the model complexity, allowing the optimizer to reschedule the complete sequence of operations for minimizing the total energy consumption, while keeping a fixed cycle time. The method has been integrated into a commercial tool for robot programming. The optimization is applicable both on new and existing robotic systems, since the required modifications are limited to the operations rescheduling, and no investments on new hardware are expected.

Energy consumption and energy modeling are important issues in designing and implementing of Wireless Sensor Networks (WSNs), which help the designers to optimize the energy consumption in WSN nodes. Good knowledge of the sources of energy consumption in WSNs is the first step to reduce energy consumption. Therefore, an accurate energy model is required for the evaluation of communication protocols. In this paper, an energy model for WSNs is provided considering the physical layer and MAC layer parameters by determining the energy consumed per payload bit transferred without error over AWGN channel. This model has been tested with real data and and NS-2 simulator. Results show good agreement between proposed model, experimental measurements and NS-2 simulator with mean absolute percentage error less than 5.18%. Furthermore, the proposed model is exploited to optimize transmitted power to achieve minimum energy consumption. Finally, a closed-form expression for optimum transmitted power is derived for M-QAM modulation scheme.

Performance analysis of rotatable energy system of high-altitude airships in real wind field

To better construct an energy consumption model for the asphalt mixture production stage, this study divides the production process into four phases: aggregate dust removal, aggregate drying, asphalt heating, and mixture blending. Utilizing measured data from various regions in Anhui Province, the model considers factors such as season, mixture type, and energy consumption type. The study quantitatively compares and analyzes the energy consumption results obtained from three calculation methods: the theoretical method, the quota method, and the energy consumption model method. The results indicate that the total energy consumption shares of the aggregate dust removal, aggregate drying, asphalt heating, and mixture blending phases are 4.23%, 69.50%, 17.75%, and 8.52%, respectively. The primary energy consumption during the asphalt mixture production stage is concentrated in the aggregate drying and asphalt heating phases. The energy consumption model based on on-site measurements effectively reflects the actual energy consumption levels during the asphalt mixture production stage. Moreover, the total energy consumption calculated by the three methods follows the order quota method > energy consumption model method > theoretical method. By constructing an energy consumption model based on measured data, it is possible to more accurately assess the energy usage during the asphalt mixture production process. This helps optimize production techniques, reduce energy consumption and carbon emissions, and provide a scientific basis for sustainable road construction.

The massive growth of cloud computing leads to huge amounts of energy consumption and release of carbon footprints as data centers are housed by a large number of servers. Consequently, the cloud service providers are looking for eco-friendly solutions to reduce energy consumption and carbon emissions. As a result, task scheduling has drawn attention, in which efficient resource utilization and minimum energy consumption take into great consideration. This is an exigent issue, especially for the heterogeneous environment. In this work, we put forward an energy-efficient task scheduling algorithm (ETSA) to address the demerits associated with task consolidation and scheduling. The proposed algorithm ETSA takes into account the completion time and total utilization of a task on the resources, and follows a normalization procedure to make a scheduling decision. We evaluate the proposed algorithm ETSA to measure energy efficiency and makespan in the heterogeneous environment. The experimental results are compared with recent algorithms, namely random, round robin, dynamic cloud list scheduling, energy-aware task consolidation, energy-conscious task consolidation and MaxUtil. The proposed algorithm ETSA provides an elegant trade-off between energy efficiency and makespan than the existing algorithms.

Auxiliary graph-based energy-efficient routing resource allocation algorithm in space division multiplexing elastic optical networks

Energy efficiency (EE) is a key requirement for the design of short-range communication network. In order to alleviate energy consumption (EC) constraint, a novel layered heterogeneous mobile cloud architecture is proposed in this paper. Based on the proposed layered heterogeneous mobile cloud architecture, we establish an appropriate energy consumption model, and design an energy efficiency scheme based on joint data packet fragmentation and cooperative transmission and analyze the energy efficiency corresponding to different packet sizes and the cloud size. Simulation results show that, when all nodes of the cloud are accessing the same size of data packet fragmentation, the proposed layered heterogeneous mobile cloud architecture can provide significant energy savings. The results provide useful insights into the possible operation of the strategies and show that significant energy consumption reductions are possible.

With the increasing energy consumption in the mining industry, the effective prediction and optimization of energy consumption in mining equipment have become pressing challenges. Traditional energy consumption prediction methods suffer from data processing delays and the fixed nature of monitoring devices, making them inadequate for meeting the real-time and flexible demands of modern mining operations. The advent of mobile computing platforms has introduced new possibilities for the dynamic prediction and optimization of energy consumption in mining equipment. In recent years, energy consumption prediction techniques based on mobile computing platforms have gained significant attention, enabling realtime data acquisition and analysis for a more precise understanding of energy consumption patterns and the implementation of efficient optimization strategies. However, existing studies predominantly focus on conventional models and methodologies, lacking effective mechanisms to capture spatiotemporal dynamics and optimize energy consumption accordingly. In this study, a spatiotemporal gated graph convolutional prediction model was proposed for the dynamic prediction of energy consumption in mining equipment based on a mobile computing platform. Additionally, an energy consumption optimization strategy was explored using the prediction results. This study provides a novel approach to energy consumption optimization in mining equipment, offering both theoretical significance and practical value.

The intensification of biological wastewater treatment requires the high usage of electric energy, mainly for aeration processes. Publications on energy consumption have been mostly related to municipal wastewater treatment plants (WWTPs). The aim of the research was to elaborate on models for the estimation of energy consumption during dairy WWTP operation. These models can be used for the optimization of electric energy consumption. The research was conducted in a dairy WWTP, operating with dissolved air flotation (DAF) and an activated sludge system. Energy consumption was measured with the help of three-phase network parameter transducers and a supervisory control and data acquisition (SCADA) system. The obtained models provided accurate predictions of DAF, biological treatment, and the overall WWTP energy consumption using chemical oxygen demand (COD), sewage flow, and air temperature. Using the energy consumption of the biological treatment as an independent variable, as well as air temperature, it is possible to estimate the variability of the total electric energy consumption. During the summer period, an increase in the organic load (expressed as COD) discharged into the biological treatment causes higher electric energy consumption in the whole dairy WWTP. Hence, it is recommended to increase the efficiency of the removal of organic pollutants in the DAF process. An application for the estimation of energy consumption was created.

In recent years, fog computing has become an important environment for dealing with the Internet of Things. Fog computing was developed to handle large-scale big data by scheduling tasks via cloud computing. Task scheduling is crucial for efficiently handling IoT user requests, thereby improving system performance, cost, and energy consumption across nodes in cloud computing. With the large amount of data and user requests, achieving the optimal solution to the task scheduling problem is challenging, particularly in terms of cost and energy efficiency. In this paper, we develop novel strategies to save energy consumption across nodes in fog computing when users execute tasks through the least-cost paths. Task scheduling is developed using modified artificial ecosystem optimization (AEO), combined with negative swarm operators, Salp Swarm Algorithm (SSA), in order to competitively optimize their capabilities during the exploitation phase of the optimal search process. In addition, the proposed strategy, Enhancement Artificial Ecosystem Optimization Salp Swarm Algorithm (EAEOSSA), attempts to find the most suitable solution. The optimization that combines cost and energy for multi-objective task scheduling optimization problems. The backpack problem is also added to improve both cost and energy in the iFogSim implementation as well. A comparison was made between the proposed strategy and other strategies in terms of time, cost, energy, and productivity. Experimental results showed that the proposed strategy improved energy consumption, cost, and time over other algorithms. Simulation results demonstrate that the proposed algorithm increases the average cost, average energy consumption, and mean service time in most scenarios, with average reductions of up to 21.15% in cost and 25.8% in energy consumption.

With the progress of the eras and the development of science and technology, the requirements of device-to-device (D2D) connectivity increased rapidly. As one important service in future systems, ultra-reliable low-latency communication (URLLC) has attracted attention in many applications, especially in the Internet of Things (IoT), smart cities, and other scenarios due to its characteristics of ultra-low latency and ultra-high reliability. However, in order to achieve the requirement of ultra-low latency, energy consumption often increases significantly. The optimization of energy consumption and the latency of the system in the communication field are often in conflict with each other. In this paper, in order to optimize the energy consumption and the latency jointly under different scenarios, and since the detailed requirements for latency and reliability are diverse in different services, we propose an adaptive UE aggregation (AUA)-based transmission scheme that explores the diversity gain of multiple simultaneous paths to reduce the overall latency of data transmission, wherein multiple paths correspond to multiple coordination nodes. Furthermore, it could provide the feasibility of link adaptation by adjusting the path number according to the real transmission environment. Then, unnecessary energy waste could be avoided. To evaluate the performance, the energy-delay product (EDP) is proposed for the latency and energy comparison. The provided simulation results align with the numerical data. Through the analysis, it can be proven that the proposed scheme can achieve a joint optimization of latency and energy consumption to meet different types of URLLC services.

Task scheduling optimization in heterogeneous cloud computing environments: A hybrid GA-GWO approach