An Environmental Friendly Routing with Channel Allocation for Underwater WSNs

Underwater Wireless Sensor Network (UWSN) is a newly emerging wireless technology in which small size sensors with limited energy and limited memory and bandwidth are deployed in deep sea water and various monitoring operations like tactical surveillance, environmental monitoring, and data collection are performed through these tiny sensors. Underwater wireless sensor networks are used for the exploration of underwater resources, oceanographic data collection, flood or disaster prevention, tactical surveillance systems, and unmanned underwater vehicles. Sensor nodes consist of a small memory, a central processing unit, and an antenna. Underwater networks are much different from terrestrial sensor networks as radio waves cannot be used in underwater wireless sensor networks. Acoustic channels are used for communication in deep sea water. Acoustic signals have many limitations, such as limited bandwidth, higher end-to-end delay, network path loss, higher propagation delay, and dynamic topology. Usually, these limitations result in higher energy consumption with a smaller number of packets delivered. The main aim nowadays is to operate sensor nodes having a smaller battery for a longer time in the network. This survey has discussed the state-of-the-art localization based and localization-free routing protocols. Routing associated issues in area of underwater wireless sensor networks have also been discussed.

Water covers more than 70 % of the entire planet, contains much of its natural resources. With the increasing use of underwater sensors for the exploitation and monitoring of vast underwater resources, underwater wireless sensor network (UWSN), mostly based on acoustic transmission technologies, have been developing steadily in terms of operation range and data throughput. In an energy-constrained underwater system environment it is very important to find ways to improve the life expectancy of the sensors. Compared to the sensors of a terrestrial Ad Hoc Wireless Sensor Network (WSN), underwater sensors cannot use solar energy to recharge the batteries, and it is difficult to replace the batteries in the sensors. This paper reviews the research progress made to date in the area of energy consumption in underwater sensor networks (UWSN) and concentrates on developing routing algorithms that support energy efficiency. These algorithms are designed to carry out data communication while prolonging the operation time of WSNs.

Underwater wireless sensor networks nodes deployment optimization problem is studied and underwater wireless sensor nodes deployment determines its capability and lifetime. If no underwater wireless sensor node is available in the monitoring area of underwater wireless sensor networks due to used up energy or any other reasons, the monitoring area where is not detected by any underwater wireless sensor node forms coverage holes. In order to improve the coverage of the underwater wireless sensor networks and prolong the lifetime of the underwater wireless sensor networks, based on the perception model, establish nodes detection model, combining with the data fusion. Because the underwater wireless sensor networks nodes coverage holes appear when the initial randomly deployment, a nodes deployment algorithm based on perception model of underwater wireless sensor networks is designed in this article. The simulation results show that this algorithm can effectively reduce the number of deployment underwater wireless sensor networks nodes, improve the efficiency of underwater wireless sensor networks coverage, reduce the underwater wireless sensor networks nodes energy consumption, prolong the lifetime of the underwater wireless sensor networks.

In the past few decades, optical communication with high data rates up to Gb/s in underwater wireless sensor networks (UWSN) has been extensively investigated. However, now a days researchers are highly focused on proposing/implementing localization algorithms for underwater optical wireless sensor networks (UOWSN) that are both fast in computation and cost efficient in terms of hardware design. In this paper we have used two different setups, one consisting of one led as a transmission node Tx. Where we exploit the effects of different angle on optical communication by implementing Lambert cosine law in a (UOWSN). The second setup is made of a led clutch which can communicate in 360 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0</sup> . Both setups are used to estimate the location of a sensor node Rx in (UOWSN). To complete the task of localization estimation, a multilateration algorithm based on Euclidean distance between the Tx and Rx nodes is used, where as Gauss–Newton method was used to find the minimum of the function.

Recently, underwater wireless sensor networks have gained a lot of attention of research from both academic world and industry and in the order to explore the immense underwater environment. To design network routing protocol is very challenging task in underwater wireless sensor networks since UWSN has peculiar features like large propagation delay, dynamic topology change, more latency and then terrestrial sensor network, low packet delivery ratio, high error rate, low bandwidth and less energy. In underwater wireless sensor network, improving energy efficiency is one of the most important challenges because substitution of batteries of sensor nodes is very costly due to harsh underwater environment. Energy consumption in UWSNs is still an open issue to be investigated, and further research should be conducted to increase the energy efficiency of UWSNs. This paper presents energy-efficient approaches used in three layer of protocol stack of underwater wireless sensor network architecture.

Underwater Sensor Networks (UWSNs) are significantly different from terrestrial sensor networks in the following aspects: low bandwidth, high latency, node mobility, high error probability, and 3-dimensional space. These new features bring many challenges to the network protocol design of UWSNs. The communication range of underwater wireless sensor networks (UWSNs) is limited, and the nodes are equipped with limited power battery whose replacement is expensive due to underwater harsh environment. Moreover, the networks including small number of nodes have communication problems for long ranges. In this paper, we evaluate the performance of three classical location-based routing protocols (namely, VBF, HH-VBF, and VBVA) for underwater wireless sensor networks in terms of three critical performance metrics for dynamic network topology. Our comparison includes energy consumption, end-to-end delay, and packet delivery ratio.

Performance modeling and analysis of void-handling methodologies in underwater wireless sensor networks

Region based cooperative routing in underwater wireless sensor networks

Packet collision in underwater wireless sensor networks (UWSNs) can create inconsistent time stamps leading to inaccurate time synchronization in underwater sensor networks. Most extant time synchronization techniques do not model for the probability of packet collision in UWSNs. This paper proposes a novel non-homogenous Poisson process (NHPP)-based back-off technique that estimates probability of packet collision in UWSN over a set period of time and allows sending of data packets only when probability of collision in a network is low. Any inconsistent time stamps are further identified and removed using Mahalanobis distance technique before linear regression is run. The proposed method performs better in extensive simulations as compared to two similar time synchronization techniques in literature.KeywordsUWSNsNon-homogenous Poisson processPacket collisionTime synchronization

Underwater sensor networks are physical networks containing acoustic,magnetic,and static electric field.It has got widely application in ocean data acquisition,pollution forecasting,ocean exploitation,and ocean supervision.And in future it will show its advantages in the battlefield.The state-of-the-art underwater wireless sensor networks are overviewed,and several typical structures of underwater wireless sensor networks are also described.Taking account of the requirements of underwater applications several fundamental key aspects in the design of underwater sensor networks,such as node localization,energy,source localization and other challenges are investigated.Finally open issues in underwater sensor networks are discussed.

Owing to the rapid development of underwater applications, the research on underwater wireless sensor networks (UWSNs) is becoming more and more significant. Low bandwidth, high latency, limited energy and node float mobility are basic challenges for underwater sensor networks. Most of the theories for terrestrial sensor networks can not be applied to underwater sensor networks. In this paper, we focus on the localization and routing issues for dynamic UWSNs. Location based routing protocols can suit the dynamic situation of UWSNs well. However, most research assumes that the nodes know their locations, which may be not appropriate for some applications. This paper combines these two aspects together to design a localization based routing protocol for dynamic UWSNs. The simulation results show our method can effectively route data from the source nodes to the sink nodes in a dynamic environment.

The underwater wireless sensor network (UWSN) is considered a promising technology for collecting valuable data from underwater areas, particularly for aiding military operations and environmental predictions. UWSNs consist of underwater sensor nodes that have limited energy and use acoustics for communication. Routing in underwater sensor nodes is one of the challenging issues in UWSNs because of the need to forward data packets with minimal energy consumption and a high packet delivery ratio. Selecting the next forwarding nodes is one of the key components of routing in UWSNs and has a direct effect on energy consumption and the packet delivery ratio. Therefore, this problem has gained much attention from the research community with the intent of enhancing the performance of UWSNs. This paper qualitatively reviews routing protocols for UWSNs, focusing on the next-hop selection method and its strengths and weaknesses. A taxonomy is presented for reviewing routing protocols under different categories of the classification. A summary of the qualitative investigation is presented highlighting aims, the next-hop selection method, metrics, and priority considerations. A comprehensive investigation is carried out focusing on energy, link quality, void awareness, reliability, and shortest path characteristics. Finally, we discuss potential future research directions in UWSNs for forwarding node selection.

Study Framework: The system of geographical information (GIS) is a computerized method for collecting, storing, disseminating, querying, updating, processing and analyzing geographic data. (GIS) enables the collection of diverse spatial data from various sources and transforms it into an information board for multiple users to boost productivity. Intelligent techniques, remote sensing, and underwater Wireless sensor networks are applied to improve GIS dramatically. Remote sensing data sources for GIS come from underwater sensor networks, The implementation of effective sensing devices, intelligent mobile nodes, and a multi-hop routing system can facilitate the efficient and optimal routing of traffic towards the basin or base station. They have been using GIS, which has revolutionized response scenarios with its ability to collect, analyze and manipulate spatial points. The objective of the study: The aim of this research is to differentiate the significant routing protocol issues that are relevant to underwater sensor networks. These networks serve as key transceivers that have established mechanisms for seamless and efficient data transmission. The mechanisms: The article presented a performance evaluation simulation based on a comparison of five different routing protocols that perform to promote GIS execution. A rigorous comparison of the outcomes varied by five routing protocols, where it evaluated with random mobility UnderWater sensor model based on the varied network parameters, was performed to validate this work. The continued to improve results: The suggested study in this manuscript contains spatial-information services universal to routing protocols to aid a group of navigators in harsh circumstances. According to the findings of the study, the CTP-ABS-SEEC routing protocol demonstrated superior performance compared to the other four routing protocols (CTP-SEEC, SEEC, EEDBR, and DBR) in the specified network configuration.

This paper explores energy-efficient ways of retrieving data from underwater sensor fields using autonomous underwater vehicles (AUVs). Since AUVs are battery-powered and therefore energy-constrained, their energy consumption is a critical consideration in designing underwater wireless sensor networks. The energy consumed by an AUV depends on the hydrodynamic design, speed, on-board payload and its trajectory. In this paper, we optimise the trajectory taken by the AUV deployed from a floating ship to collect data from every cluster head in an underwater sensor network and return to the ship to offload the data. The trajectory optimisation algorithm models the trajectory selection as a stochastic shortest path problem and uses reinforcement learning to select the minimum cost path, taking into account that banked turns consume more energy than straight movement. We also investigate the impact of AUV speed on its energy consumption. The results show that our algorithm improves AUV energy consumption by up to 50% compared with the Nearest Neighbour algorithm for sparse deployments.

With the increasing underwater applications, underwater wireless sensor networks (UWSNs) have become a research hotspot. Routing protocols used to keep network connectivity and reliable transmission are essential in UWSNs. Due to the specific limitations in UWSNs, such as serious ocean interference, high propagation latency, and dynamic network topology, it is challenging to balance multiple performances, such as real timeness and energy efficiency in a routing protocol. To this end, this article proposes a localization-free routing scheme, termed energy-efficient guiding-network-based routing (EEGNBR) protocol, to provide a time saving and reliable routing for UWSNs, which is a good choice for applications characterized by intermittent connectivity. For reducing the network delay, EEGNBR cites the advantageous distance-vector mechanism and establishes a guiding network to provide underwater sensor nodes with the shortest route (minimum hop counts) toward the sinks. Moreover, EEGNBR innovatively replaces the waiting mechanism used in traditional opportunistic routing with a novel data forwarding mechanism named concurrent working mechanism, which could greatly reduce the forwarding delay while guaranteeing reliable routing. In order to ensure routing reliability as well as avoid duplicate transmission, the forwarding protection mechanism is adopted to save energy consumption and extend the service life of the network. Simulation results show that EEGNBR performs significantly better than some classical related protocols in terms of network delay while maintaining comparable or even better energy consumption and packet delivery ratio.