An Improved Deep Residual Network-Based Semantic Simultaneous Localization and Mapping Method for Monocular Vision Robot.

In the last decades, Simultaneous Localization and Mapping (SLAM) proved to be a fundamental topic in the field of robotics, due to the many applications, ranging from autonomous driving to 3D reconstruction. Many systems have been proposed in literature exploiting a heterogeneous variety of sensors. State-of-the-art methods build their own map from scratch, using only data coming from the equipment of the robot, and not exploiting possible reconstructions of the environment. Moreover, temporary loss of data proves to be a challenge for SLAM systems, as it demands efficient re-localization to continue the localization process. In this paper, we present a SLAM system that exploits additional information coming from mapping services like OpenStreetMaps, hence the name OSM-SLAM, to face these issues. We extend an existing LiDAR-based Graph SLAM system, ART-SLAM, making it able to integrate the 2D geometry of buildings in the trajectory estimation process, by matching a prior OpenStreetMaps map with a single LiDAR scan. Each estimated pose of the robot is then associated with all buildings surrounding it. This association allows to improve localization accuracy, but also to adjust possible mistakes in the prior map. The pose estimates coming from SLAM are then jointly optimized with the constraints associated with the various OSM buildings, which can assume one of the following types: Buildings are always fixed (Prior SLAM); buildings surrounding a robot are movable in chunks, for every scan (Rigid SLAM); and every single building is free to move independently from the others (Non-rigid SLAM). Lastly, OSM maps can also be used to re-localize the robot when sensor data is lost. We compare the accuracy of the proposed system with existing methods for LiDAR-based SLAM, including the baseline, also providing a visual inspection of the results. The comparison is made by evaluating the estimated trajectory displacement using the KITTI odometry dataset. Moreover, the experimental campaign, along with an ablation study on the re-localization capabilities of the proposed system and its accuracy in loop detection-denied scenarios, allow a discussion about how the quality of prior maps influences the SLAM procedure, which may lead to worse estimates than the baseline.

Simultaneous Localization and Mapping (SLAM) plays an important role in the computer vision and robotics field. The traditional SLAM framework adopts a strong static world assumption for analysis convenience. How to cope with dynamic environments is of vital importance and attracts more attentions. Existing SLAM systems toward dynamic scenes either solely utilize semantic information, solely utilize geometry information, or naively combine the results from them in a loosely coupled way. In this paper, we present SOF-SLAM: Semantic Optical Flow SLAM, a visual semantic SLAM system toward dynamic environments, which is built on RGB-D mode of ORB-SLAM2. A new dynamic features detection approach called semantic optical flow is proposed, which is a kind of tightly coupled way and can fully take advantage of feature's dynamic characteristic hidden in semantic and geometry information to remove dynamic features effectively and reasonably. The pixel-wise semantic segmentation results generated by SegNet serve as mask in the proposed semantic optical flow to get a reliable fundamental matrix, which is then used to filter out the truly dynamic features. Only the remaining static features are reserved in the tracking and optimization module to achieve accurate camera pose estimation in dynamic environments. Experiments on public TUM RGB-D dataset and in real-world environment are conducted. Compared with ORB-SLAM2, the proposed SOF-SLAM achieves averagely 96.73% improvements in high-dynamic scenarios. It also outperforms the other four state-of-the-art SLAM systems which cope with the dynamic environments.

Simultaneous Localization And Mapping (SLAM) has become a crucial aspect in the fields of autonomous driving and robotics. One crucial component of visual SLAM is the Field-of-View (FoV) of the camera, as a larger FoV allows for a wider range of surrounding elements and features to be perceived. However, when the FoV of the camera reaches the negative half-plane, traditional methods for representing image feature points using <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$[u,v,1]^T$</tex-math> </inline-formula> become ineffective. While the panoramic FoV is advantageous for loop closure, its benefits are not easily realized under large-attitude-angle differences where loop-closure frames cannot be easily matched by existing methods. As loop closure on wide-FoV panoramic data further comes with a large number of outliers, traditional outlier rejection methods are not directly applicable. To address these issues, we propose LF-VISLAM, a <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">V</b> isual <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">I</b> nertial <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">SLAM</b> framework for cameras with extremely <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">L</b> arge <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">F</b> oV with loop closure. A three-dimensional vector with unit length is introduced to effectively represent feature points even on the negative half-plane. The attitude information of the SLAM system is leveraged to guide the feature point detection of the loop closure. Additionally, a new outlier rejection method based on the unit length representation is integrated into the loop closure module. We collect the PALVIO dataset using a <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">P</b> anoramic <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">A</b> nnular <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">L</b> ens (PAL) system with an entire FoV of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$360^\circ{\times}(40^\circ{\sim}120^\circ)$</tex-math> </inline-formula> and an Inertial Measurement Unit (IMU) for <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">V</b> isual <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">I</b> nertial <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">O</b> dometry (VIO) to address the lack of panoramic SLAM datasets. Experiments on the established PALVIO and public datasets show that the proposed LF-VISLAM outperforms state-of-the-art SLAM methods. Our code will be open-sourced at https://github.com/flysoaryun/LF-VISLAM. <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Note to Practitioners</i> —Motivated by the challenges of handling large-FoV cameras in SLAM applications, this paper proposes LF-VISLAM, a novel SLAM framework that uses a large-FoV camera and IMU sensors. Our framework is equipped with a loop closure thread that can use attitude information to eliminate accumulated errors. We have made algorithmic adjustments and optimizations to the negative half-plane features to better adapt to cameras with large FoV. Experimental evaluations demonstrate that LF-VISLAM significantly outperforms traditional SLAM methods. Additionally, the code will be open-sourced, providing easy access for research and implementation. Overall, LF-VISLAM is a promising solution to improve the performance of SLAM in challenging environments of autonomous driving and robotics.

Simultaneous Localization and Mapping (SLAM) is a fundamental problem in mobile robotics. However, the majority of Visual SLAM algorithms assume a static scenario, limiting their applicability in real-world environments. Dealing with dynamic content in Visual SLAM is still an open problem, with solutions usually relying on direct or feature-based methods. Deep learning techniques can improve the SLAM solution in environments with a priori dynamic objects, providing high-level information of the scene. This paper presents a new approach to SLAM in human populated environments using deep learning-based techniques. The system is built on ORB-SLAM2, a state-of-the-art SLAM system. The proposed methodology is evaluated using a benchmark dataset, outperforming other Visual SLAM methods in highly dynamic scenarios.

Current visual simultaneous localization and mapping (SLAM) systems have demonstrated commendable efficacy in static environments. However, the presence of dynamic objects in real-world settings frequently leads to system discrepancies, significantly impairing the accuracy and robustness of SLAM systems. Conventional visual SLAM approaches typically utilize epipolar constraints to mitigate the impact of outliers; nevertheless, they encounter limitations when confronted with a substantial number of dynamic or planar moving objects. To tackle these issues, this paper introduces a novel dynamic visual SLAM system, termed DEG-SLAM. Initially, the system employs the YOLOv5 object detection network to identify dynamic objects, subsequently relaying the semantic information to the tracking module. During the tracking phase, both semantic information and epipolar constraints are leveraged to filter out dynamic feature points. To address the challenges posed by the malfunctioning of epipolar constraints in degenerate scenes, DEG-SLAM incorporates a degenerate constraint mechanism aimed at further eliminating dynamic feature points. Furthermore, a reprojection constraint has been introduced to enhance the filtering of absent dynamic feature points that lie outside the detection boxes. Experimental findings reveal that DEG-SLAM significantly improves accuracy and robustness when compared to traditional ORB-SLAM3 in dynamic environments. The performance benefits of DEG-SLAM are particularly evident in degenerate scenarios, thereby affirming its practicality and reliability in complex settings.

Visual Simultaneous Localization and Mapping (SLAM) technologies based on point features achieve high positioning accuracy and complete map construction. However, despite their time efficiency and accuracy, such SLAM systems are prone to instability and even failure in poor texture environments. In this paper, line features are integrated with point features to enhance the robustness and reliability of stereo SLAM systems in poor texture environments. Firstly, method Edge Drawing lines (EDlines) is applied to reduce the line feature detection time. Meanwhile, the proposed method improves the reliability of features by eliminating outliers of line features based on the entropy scale and geometric constraints. Furthermore, this paper proposes a novel Bags of Word (BoW) model combining the point and line features to improve the accuracy and robustness of loop detection used in SLAM. The proposed PL-BoW technique achieves this by taking into account the co-occurrence information and spatial proximity of visual words. Experiments using the KITTI and EuRoC datasets demonstrate that the proposed stereo Point and EDlines SLAM (PEL-SLAM) achieves high accuracy consistently, including in challenging environments difficult to sense accurately. The processing time of the proposed method is reduced by 9.9% and 4.5% when compared to the Point and Line SLAM (PL-SLAM) and Point and stereo Point and Line based Visual Odometry (sPLVO) methods, respectively.

Simultaneous Localization and Mapping (SLAM) is one of the fundamental functionalities for intelligent mobile robots. Over the last few decades, numerous impressive SLAM systems have been developed, demonstrating commendable performance in specific scenarios. However, some challenges still remain unsolved, such as how to handle moving objects in complex environments and how to enable robots to gain a true understanding of their surroundings and perform advanced tasks. This paper proposes a visual SLAM system, YOLOv7-SLAM, designed for complex environments with strong robustness. YOLOv7-SLAM employs a multi-threaded approach with five parallel threads: tracking, semantic segmentation, local mapping, loop closure, and dense semantic mapping creation. YOLOv7-SLAM employs the YOLO object detection method to remove obstacles in complex scenes, reducing the impact of obstacles in the environment and significantly enhancing localization accuracy in complex environments. We conducted experiments using the TUM RGB-D dataset. The results show that YOLOv7-SLAM achieves an order of magnitude improvement in absolute trajectory accuracy compared to ORB-SLAM2, making it one of the most advanced SLAM systems for complex environments. Our experiments were validated using the TUM RGB-D dataset. The results showcase a notable enhancement in the absolute trajectory accuracy of YOLOv7-SLAM in comparison to ORB-SLAM2 [1]. It performs well in complex obstacle-rich environments.

Visual Simultaneous Localization and Mapping (SLAM) plays an important role in computer vision and robotic field. With the development of Convolutional Neural Network (CNN), most scholars currently fuse CNN with visual SLAM to reduce the impact of dynamic objects on visual SLAM. To address the impact of semantic segmentation networks with lower precision and quad-tree algorithm with over-uniform distribution of feature points on the location accuracy of SLAM, we proposed an STDC-SLAM: Short-Term Dense Concatenate Network SLAM, which was based on ORB-SLAM3. In the proposed system, a real-time STDC network was used for semantic thread to segment dynamic objects. On the one hand, we designed a segmentation refinement module to optimize the semantic segmentation maps using images depth information. On the other hand, we improved the Qtree-ORB algorithm by reducing the iterations of low-quality feature points in the rejection thread. We have evaluated our SLAM in public data sheets and compared it with ORB-SLAM3, DynaSLAM, PSPNet-SLAM. Experiments showed that our SLAM improved in localization accuracy compared to DynaSLAM and in processing speed compared to DynaSLAM and PSPNet-SLAM.

Typical visual simultaneous localization and mapping (SLAM) systems rely on purely geometric elements. Recently semantic SLAM has become popular due to its capability to obtain high-level understanding of the environment. However, most semantic SLAM systems merely aim to produce semantic maps rather than exploiting semantic constraints to boost the accuracy performance. In this paper, we propose a new RGB-D SLAM system for the use in indoor environments. Given that a ground plane represents a significant part of most indoor scenes, our new system exploit a semantic ground plane constraint inferred from a deep neural network along with geometric constraints on the state estimation to improve the performance. More specifically, we introduce a semantically meaningful geometric primitive, namely, a global ground plane to the optimization process of visual SLAM. The global ground model is able to provide an extra constraint on the state estimation through which both frame-to-keyframe and frame-to-model tracking processes are combined, and low-texture ground plane is effectively utilized. Experimental results for the TUM dataset and a real scene have demonstrated the improved performance brought by the semantic constraint in our method.

Simultaneous localization and mapping (SLAM) plays a crucial role in the field of intelligent mobile robots. However, the traditional Visual SLAM (VSLAM) framework is based on strong assumptions about static environments, which are not applicable to dynamic real-world environments. The correctness of re-localization and recall of loop closure detection are both lower when the mobile robot loses frames in a dynamic environment. Thus, in this paper, the re-localization and loop closure detection method with a semantic topology graph based on ORB-SLAM2 is proposed. First, we use YOLOv5 for object detection and label the recognized dynamic and static objects. Secondly, the topology graph is constructed using the position information of static objects in space. Then, we propose a weight expression for the topology graph to calculate the similarity of topology in different keyframes. Finally, the re-localization and loop closure detection are determined based on the value of topology similarity. Experiments on public datasets show that the semantic topology graph is effective in improving the correct rate of re-localization and the accuracy of loop closure detection in a dynamic environment.

Simultaneous localization and mapping (SLAM) is an important problem to solve in robotics theory in order to build truly autonomous mobile robots. This work presents a novel method for implementing a SLAM system based on a single camera sensor. The SLAM with a single camera, or monocular SLAM, is probably one of the most complex SLAM variants. In this case, a single camera, which is freely moving through its environment, represents the sole sensor input to the system. The sensors have a large impact on the algorithm used for SLAM. Cameras are used more frequently, because they provide a lot of information and are well adapted for embedded systems: they are light, cheap and power-saving. Nevertheless, and unlike range sensors, which provide range and angular information, a camera is a projective sensor providing only angular measurements of image features. Therefore, depth information (range) cannot be obtained in a single step. In this case, special techniques for feature system-initialization are needed in order to enable the use of angular sensors (as cameras) in SLAM systems. The main contribution of this work is to present a novel and robust scheme for incorporating and measuring visual features in filtering-based monocular SLAM systems. The proposed method is based in a two-step technique, which is intended to exploit all the information available in angular measurements. Unlike previous schemes, the values of parameters used by the initialization technique are derived directly from the sensor characteristics, thus simplifying the tuning of the system. The experimental results show that the proposed method surpasses the performance of previous schemes.

In this work, we present a comparative analysis of the trajectories estimated from various Simultaneous Localization and Mapping (SLAM) systems in a simulation environment for vineyards. Vineyard environment is challenging for SLAM methods, due to visual appearance changes over time, uneven terrain, and repeated visual patterns. For this reason, we created a simulation environment specifically for vineyards to help studying SLAM systems in such a challenging environment. We evaluated the following SLAM systems: LIO-SAM, StaticMapping, ORB-SLAM2, and RTAB-MAP in four different scenarios. The mobile robot used in this study equipped with 2D and 3D lidars, IMU, and RGB-D camera (Kinect v2). The results show good and encouraging performance of RTAB-MAP in such an environment.

Simultaneous localisation and mapping (SLAM) is crucial in mobile robotics. Most visual SLAM systems assume that the environment is static. However, in real life, there are many dynamic objects, which affect the accuracy and robustness of these systems. To improve the performance of visual SLAM systems, this study proposes a dynamic visual SLAM (SEG-SLAM) system based on the orientated FAST and rotated BRIEF (ORB)-SLAM3 framework and you only look once (YOLO)v5 deep-learning method. First, based on the ORB-SLAM3 framework, the YOLOv5 deep-learning method is used to construct a fusion module for target detection and semantic segmentation. This module can effectively identify and extract prior information for obviously and potentially dynamic objects. Second, differentiated dynamic feature point rejection strategies are developed for different dynamic objects using the prior information, depth information, and epipolar geometry method. Thus, the localisation and mapping accuracy of the SEG-SLAM system is improved. Finally, the rejection results are fused with the depth information, and a static dense 3D mapping without dynamic objects is constructed using the Point Cloud Library. The SEG-SLAM system is evaluated using public TUM datasets and real-world scenarios. The proposed method is more accurate and robust than current dynamic visual SLAM algorithms.

In indoor dynamic scenes, traditional visual simultaneous localization and mapping (SLAM) algorithms based on RGB-D cameras incorrectly use dynamic features to estimate the poses of the cameras, and do not fully utilize the geometric information in the scenes, resulting in the low positioning accuracy and robustness of SLAM systems. To solve this problem, this paper proposes an RGB-D SLAM algorithm based on multiple geometric features and semantic segmentation. The core of our SLAM system is the proposed robust exclusion method of dynamic point and line features. The method consists of the following three steps: (a) identify potential dynamic point features using motion consistency checks; (b) obtain potential motion regions via semantic segmentation, and then determine dynamic regions by combining these with dynamic point features; (c) remove point and line features in dynamic regions. The exclusion method of dynamic point and line features can be easily integrated into RGB-D SLAM systems for improving the accuracy and robustness of SLAM systems in dynamic scenes. Experimental results on the Technische Universität München (TUM) dataset demonstrate that the proposed algorithm has better positioning accuracy and stability than the original dynamic semantic (DS-SLAM) algorithm in dynamic environments. The effectiveness of the proposed algorithm is verified by comparison with other classical visual SLAM algorithms. Better mapping performance is achieved by this proposed algorithm in actual indoor scenes.

Visual Simultaneous Localization and Mapping (SLAM) is crucial to many applications such as self-driving vehicles and robot tasks. However, it is still challenging for existing visual SLAM approaches to achieve good performance in low-texture or illumination-changing scenes. In recent years, some researchers have turned to edge-based SLAM approaches to deal with the challenging scenes, which are more robust than feature-based and direct SLAM methods. Nevertheless, existing edge-based methods are computationally expensive and inferior than other visual SLAM systems in terms of accuracy. In this study, we propose EdgeSLAM, a novel RGB-D edge-based SLAM approach to deal with challenging scenarios that is efficient, accurate, and robust. EdgeSLAM is built on two innovative modules: efficient edge selection and adaptive robust motion estimation. The edge selection module can efficiently select a small set of edge pixels, which significantly improves the computational efficiency without sacrificing the accuracy. The motion estimation module improves the system's accuracy and robustness by adaptively handling outliers in motion estimation. Extensive experiments were conducted on TUM RGBD, ICL-NUIM and ETH3D datasets, and experimental results show that EdgeSLAM significantly outperforms five state-of-the-art (SOTA) methods in terms of efficiency, accuracy, and robustness, which achieves 29.17% accuracy improvements with a high processing speed of up to 120 FPS and a high positioning success rate of 97.06%.