An Improved Flower Pollination Algorithm for Optimizing Layouts of Nodes in Wireless Sensor Network

Profiling environmental parameter using a large number of spatially distributed wireless sensor network (WSN) NODEs is an extensive illustration of advanced modern technologies, but high power requirement for WSN NODEs limits the widespread deployment of these technologies. Currently, WSN NODEs are extensively powered up using batteries, but the battery has limitation of lifetime, power density, and environmental concerns. To overcome this issue, energy harvester (EH) is developed and presented in this paper. Solar-based EH has been identified as the most viable source of energy to be harvested for autonomous WSN NODEs. Besides, a novel chemical-based EH is reported as the potential secondary source for harvesting energy because of its uninterrupted availability. By integrating both solar-based EH and chemical-based EH, a hybrid energy harvester (HEH) is developed to power up WSN NODEs. Experimental results from the real-time deployment shows that, besides supporting the daily operation of WSN NODE and Router, the developed HEH is capable of producing a surplus of 971 mA·hr equivalent energy to be stored inside the storage for NODE and 528.24 mA·hr equivalent energy for Router, which is significantly enough for perpetual operation of autonomous WSN NODEs used in environmental parameter profiling.

Herein, an Internet of Things (IoT) system with remote reconfigurable wireless sensor network (WSN) nodes is presented and its application to measure group work activity in a classroom is discussed. This IoT system consists of wiki pages, bots, (defined as remotely controlled devices), gateways, and remotely reconfigurable WSN Nodes. The bots/gateways and WSN nodes of the IoT system are controlled by scripts written on wiki pages that are read by the bot/gateways, which then forward the commands contained in the scripts to the WSN nodes. Each WSN node then executes the commands, obtains the resulting sensor values, and then returns those values to the bot/gateways. The bot/gateways relay the values and write them onto the wiki page. Each WSN node is flexible and reconfigurable because its behavior can be changed by the script commands written onto the wiki page. Using this IoT system, we created a measurement system to evaluate activity levels of group work in a classroom. After developing the measurement system, we found it was possible to adjust the sampling rate for obtaining sensor values simply by rewriting the script on the wiki page without directly manipulating the WSN.

In this article, efficient power saving scheme and corresponding algorithm must be developed and designed in order to provide reasonable energy consumption and to improve the network lifetime for wireless sensor network systems. The clusterbased technique is one of the approaches to reduce energy consumption in wireless sensor networks. In this article, we propose a saving energy clustering algorithm to provide efficient energy consumption in such networks. The main idea of this article is to reduce data transmission distance of sensor nodes in wireless sensor networks by using the uniform cluster concepts. In order to make an ideal distribution for sensor node clusters, we calculate the average distance between the sensor nodes and take into account the residual energy for selecting the appropriate cluster head nodes. The lifetime of wireless sensor networks is extended by using the uniform cluster location and balancing the network loading among the clusters. Simulation results indicate the superior performance of our proposed algorithm to strike the appropriate performance in the energy consumption and network lifetime for the wireless sensor networks.

Wireless Sensor Network (WSN) suffers from different malware attacks. Several traditional approaches are proposed for detecting fault nodes in WSN. It is necessary to redistribute the nodes and detect the fault nodes while modifying the WSN parameters. Faults can occur in the nodes interrupting the continuous communication process of the nodes in the WSN. The main reason for a fault is also the induction of the energy drain in a node to the maximum possible level, failure of links in communicating nodes due to bandwidth constraints, and attacks induced by the malicious nodes. To solve this problems, Extended Finite State Machine based Fault Tolerance (EFSM_FT) in the WSN is used to detect the fault sensor nodes in the WSN. In this approach, called the finite state machine (FSM), state prompted is modified while a set of situations are true. Every node can be absolutely to be faulty or not establishing on the sensor node states. Using sensor energy, drop rate, forward sensor rate, sensor obtained rate, bandwidth, and transmission delay, this method finds the node with the fault. As a result, this approach accurately detects the faulty nodes in the WSN. The simulation outcomes illustrate the proposed method has a better fault detection ratio and minimizes the false negative ratio in the WSN.

Recently, the technology of wireless sensor networks (WSNs) experiences a growing use in home automation or advanced industry infrastructure applications. Despite a strong interest of industries in this technology, key issues like miniaturization and security of WSN nodes has not been solved yet. State-of-the-art WSN nodes do not provide credible security nor satisfying configurability and miniaturized implementations. This publication deals with these limitations and presents a WSN node that provides security, configurability, and a miniaturized design. To show the sensor node feasibility, the WSN node is implemented within a smart home demonstrator. Additionally, a miniaturized pre-study WSN node design is presented using the novel embedded wafer level ball grid array (eWLB) packaging technology. Furthermore, an eWLB based WSN node design is proposed that further miniaturize the presented WSN node.

Over the past decades, hardware and software technologies for wireless sensor networks (WSNs) have significantly progressed, and WSNs are widely used in various areas including Internet of Things (IoT). In general, existing WSNs are mainly used for applications that require delay-tolerance and low-computation due to the poor resources of traditional sensor nodes in WSNs. However, compared to the traditional sensor nodes, today’s devices for WSNs have more powerful resource. Thus, sensor nodes these days not only conduct sensing and transmitting data to servers but also are able to process many operations, so more diverse applications can be applied to WSNs. Especially, many applications using audio data have been proposed because audio is one of the most widely used data types, and many mobile devices already have a built-in microphone. However, many of the applications have a requirement that heavy-operations should be done by a tight deadline, so it is difficult for a single node in WSNs to run relatively heavy applications by itself. In this paper, to overcome this limitation of WSNs, we propose a new emerging system, HeaLow, a cooperative computing system for heavy-computation and low-latency processing in WSNs. We designed HeaLow and carried out the practical implementation on real devices. We confirmed the effectiveness of HeaLow through various experiments using the real devices and simulations. Using HeaLow, nodes in WSNs are able to perform heavy-computation processes while satisfying a completion time requirement.

Self-powered wireless sensor networks based on the radioisotope thermoelectric generator for aquatic temperature monitoring

One of the remarkable challenges in the area of Wireless Sensor Networks (WSNs) is how to route the collected data and transfer them in the nodes. Due to the high rate of packet loss, guaranteeing reliable and efficient packet transfer and delivery is considered to be one of the hot issues in the area of WSNs. Indeed, due to energy limitation of nodes in WSNs, reliability and energy are regarded as critical parameters in these networks. In this paper, a method has been proposed for optimizing the parameters of reliability and energy consumption in multimedia WSNs. In the proposed protocol, Increasing the Delivery Ratio with Network Coding (IDRNC) a network coding mechanism has been used for transmitting data which enhances the reliability of the network. Furthermore, reducing the number of transmissions and receptions in network nodes results in the reduction of energy consumption. In the proposed protocol, the transmitted packets are first coded and transmitted to the sink through the shortest route. In the middle of the route, in case packets are lost, median nodes can detect and recover the lost packet through the coded packet. The simulation results indicated that the method proposed in this study operates better than the LIEMRO method with respect to the following features: system efficiency, average remaining energy of the network, the number of lost packets and reliability. Keywords: Multipath Routing, Network Coding, Reliability, Wireless Multimedia Sensor Networks (WMSNs)

Wireless sensor network (WSN) is a network consist of multiple sensor nodes which sense and transmit data to a base station for data collection. Since the nodes in WSN are battery powered devices and nodes loss energy mostly due to transmission, an energy efficient routing protocol is needed to reduce the nodes energy consumption and prolong the network lifetime. However, existing routing protocols produce some drawbacks such as selection of cluster head with low residual energy and formation of different sizes of cluster which leads to uneven energy consumption among the nodes. Therefore, an Ant Colony Optimization based Low Energy Adaptive Clustering Hierarchy (LEACH-ACO) protocol for energy efficient transmission in WSN is proposed in this paper. This research aims to develop a routing protocol that utilize the existing LEACH routing protocol to improve the performance of WSN and prolong the lifetime of the network. The results showed that LEACH-ACO protocol outperformed Direct Transmission (DT) and LEACH protocol in terms of network lifetime, energy consumption and energy per transmission.

The nodes in wireless sensor networks (WSNs) are responsible for communicating data which is primarily of three types viz. video, audio and text. In literature, a large number of energy aware and shortest path based route selection approaches have been proposed to enhance the routing efficiency in WSNs. Most of these route selection approaches are designed by assuming fixed type and size of data packets and results in the same path selection for all types of data. This path selection, does not consider data size and data priority, results in high contention losses, topology failures and non-uniformity in energy depletion of nodes. In this paper, a route selection approach which is based on the preservation of network connectivity for improving overall network lifetime has been proposed for applications where sensor nodes are required to transmit different types of data. The proposed approach preserve highly connected edges at the initial rounds of data communication in an energy efficient manner, such that network connectivity would be maintained even at later rounds of data communications. The proposed route selection approach, VDR, (Variable Data rate Routing) has been simulated with both proactive and reactive route maintenance strategies. The simulation results show that the proposed algorithm with both proactive and reactive route maintenance strategies result in better network lifetime, energy consumption, overall network connectivity, packet delivery ratio as compared to the existing State-of-the-Art energy efficient route selection approaches with proactive and reactive route maintenance strategies. The results also show that the proposed algorithm is scalable and performs better than the compared algorithms both at low node density and high node density.

An effective technique to reduce energy consumption in wireless sensor networks (WSNs) is to make use of cooperative communications between nodes. In this technique, all nodes contribute to the transmission of data as senders and may transmit their data through relay nodes instead of sending directly to the receivers. This paper has the goal of reducing energy consumption. In this way, two wasted energies are considered, including the consumption for data transfer between any given pair of nodes and the same for end-to-end data transfer. In practice, the problem can be modeled as an optimization problem. However, finding the solution for this problem needs large resources such as memory and processing units. We propose a multi-objective genetic algorithm to solve this problem. The proposed algorithm balances the per-hop energy consumption with the end-to-end ones using the Pareto analysis. The simulations show that the proposed method offers acceptable results in comparison with the optimization model. However, the proposed algorithm can be solved in a shorter time.

PAPR reduction of asymmetrically clipped optical OFDM signals: Optimizing PTS technique using improved flower pollination algorithm

An energy-efficient cross-layer-based opportunistic routing protocol and partially informed sparse autoencoder for data transfer in wireless sensor network

Most of the proposed algorithms focus on static networks of sensors with either static or mobile anchors, in which the Monte Carlo localization algorithm is a typical one for localizing nodes in a mobile wireless sensor network. But the radio range being all different or inconstant in this algorithm leads to reduce the accuracy of localization and the efficiency of the algorithm itself. In this article, we propose the novel rang-based stochastic Monte Carlo localization algorithm for wireless sensor networks specifically designed with mobility to improve the accuracy of localization by dealing with the different radio ranges of sensors, and being bound to the narrow sampling area. Our simulation experimental results show that the rang-based stochastic Monte Carlo localization algorithm has improved the accuracy and stability of the estimated locations.

The energy of the node in Wireless Sensor Network (WSN) is supplied by the battery, and the energy is limited. In this paper, the more energy-efficient WSN routing protocol is improved, to support the operation of the WSN to prolong the lifetime of network as much as possible. On the basis of the existing Low Energy Adaptive Clustering Hierarchy (LEACH) routing protocol, a new Geography and Energy Cluster Algorithm is proposed. The new algorithm not only improve the biggest connectivity of the clustering routing protocol, but also balance the energy consumption of the whole network, and achieve more energy-efficient . The results of the simulation of the software indicated that the new improvement of GECA protocol is more efficient and prolongs the WSN lifetime.