An Optimized Convolution Neural Network Architecture for Paddy Disease Classification

Recognition of human activity based on convolutional neural network has received the interest of researchers in recent years due to its significant improvement in accuracy. A large number of algorithms based on the deep learning approach have been proposed for activity recognition purpose. However, with the increasing advancements in technologies having limited computational resources, it needs to design an efficient deep learning-based approaches with improved utilization of computational resources. This paper presents a simple and efficient 2-Dimensional convolutional neural network (2-D CNN) architecture with very small size convolutional kernel for human activity recognition. The merit of the proposed CNN architecture over standard deep learning architectures is fewer trainable parameters and lesser memory requirement which enables it to train the proposed CNN architecture on low GPU memory-based devices and also works well with smaller as well as larger size datasets. The proposed approach consists of mainly four stages: namely (1) creation of dataset and data augmentation, (2) designing 2-D convolutional neural network (CNN) architecture, (3) the proposed 2-D CNN architecture trained from scratch up to optimum stage, and (4) evaluation of the trained 2-D CNN architecture. To illustrate the effectiveness of the proposed architecture several extensive experiments are conducted on three publicly available datasets, namely IXMAS, YouTube, and UCF101 dataset. The results of the proposed method and its comparison with other state-of-the-art methods [8-12,14,18-26,29-33] demonstrate the usefulness of the proposed method.

Plant diseases are a severe threat to the environment, economy, and health. Early disease identification remains a challenging task in Iraq due to the scarce of the necessary resources and infrastructure. This paper uses various deep learning algorithms to detect different diseases on plant leaves and detect healthy ones, using an RGB camera as a crucial part of our real-time autonomous greenhouses' robot along with using two datasets, plant-village and cotton dataset, to investigate the best convolutional neural network architecture. The first dataset contained 10,190 images from the plant-village open datasets; it includes four crops with ten distinct classes of diseased and healthy leaves. Moreover, the cotton dataset contained 2,204 images for training and 106 images for testing; it has four classes of diseased and healthy plants and leaves. Different network architectures were tested in this paper for the best suitable lightweight architecture for our mobile robot. Results show that the best performance is 99.908% which achieved by the VGG16 network. The highest accuracy of VGG16 obtained in our research makes it the best tool for our autonomous plant disease detection robot. Index Terms— Convolutional neural networks architectures, Computer vision, Deep learning, Leaf disease detection and classification, Precision agriculture.

Effective plant disease detection is paramount for ensuring global food security and sustainable agricultural practices. This article presents a comprehensive exploration of utilizing machine learning, specifically Convolutional Neural Networks (CNNs), for accurate and timely plant disease classification. The research delves into the integration of diverse datasets, preprocessing techniques, and CNN architecture to create a robust disease detection model. The dataset, encompassing various crops and diseases, forms the foundation for training the model, while preprocessing ensures optimal data quality. The CNN architecture, meticulously designed, progresses through convolutional and pooling layers to extract hierarchical features from input images. The trained model achieves an accuracy of 92.23% on disease classification, showcasing the potential of such technology in agricultural innovation. The article underscores the pivotal role of machine learning in revolutionizing plant disease detection, thus contributing to global food security and sustainable agriculture.

Agriculture is an important sector for developing countries and farmers. Recently, numerous techniques for increasing agricultural productivity have been utilized. However, different issues are still encountered by farmers including various plant diseases. Plant diseases diagnoses are challenging research, and they should be analyzed and treated by detecting the diseased plant leaves. For that reason, in this paper, we develop our proposed architecture using convolutional neural networks (OP-CNN) as a computer-aided to detect and diagnose plant diseases. The proposed architecture can assist farmers in increasing both the quantity and quality of their agricultural productivity. Besides this, the OP-CNN helps to reduce disease prevalence through early detection. The performance of our proposed model is compared with other convolutional neural networks (CNN) architectures in order to validate its capability. The strawberry dataset was employed to train and test the models since the strawberry is one of the main crops in the Larache Province (Morocco). The experimental tests demonstrate that our proposed OP-CNN reaches the highest values versus DenseNet121, VGG19, and ResNet50 with 100%, 99%, 97%, and 63% respectively for classification accuracy, 100%, 100%, 98% and, 79% respectively for precision, 100%, 99%, 97%, and 63% respectively for recall, and 100%, 99%, 97%, and 58% respectively for "F" _1Score.

Deep Learning (DL) is a fastest growing and a broader part of machine learning family. Deep learning uses Convolutional Neural Networks (CNN) for image classification as it gives the most accurate results in solving real- world problem. CNN has various pre-trained architecture like AlexNet, GoogleNet, DenseNet, SqueezeNet, ResNet, VGGNet etc. In this study, we have used CNN and AlexNet architecture for detecting the disease in Mango and Potato leaf and compare the accuracy and efficiency between these architectures. The dataset containing 4004 images were used for this work. The images for potato were taken from plantvillage website, while images for mango were collected from GBPUAT field location. The results show that accuracy achieved from AlexNet is higher than CNN architecture.

In this paper, the Convolutional Neural Network (CNN) architecture, which is one of the deep learning architectures, is used to classify the basic circuit components drawn by hand. During the training and testing stages of the model, a new dataset containing images of 863 circuit components manually drawn by different people is created. The data set contains images of four different classes of circuit components such as resistor, inductor, capacitor and voltage source. All images have been fixed to the same size and converted to grayscale to increase recognition performance and reduce process complexity. In the study, training for four classes is performed with CNN architecture. Based on the CNN architecture, four new CNN models are employed with different the number of layers. The training and validation results of these models are compared separately, the model with the highest training and validation performance is observed with four layer CNN model (CNN-4). This model obtained 84.41% accuracy rate at classification task.

In this paper, we study the performance of variants of well-known Convolutional Neural Network (CNN) architectures on different audio tasks. We show that tuning the Receptive Field (RF) of CNNs is crucial to their generalization. An insufficient RF limits the CNN's ability to fit the training data. In contrast, CNNs with an excessive RF tend to over-fit the training data and fail to generalize to unseen testing data. As state-of-the-art CNN architectures - in computer vision and other domains - tend to go deeper in terms of number of layers, their RF size increases and therefore they degrade in performance in several audio classification and tagging tasks. We study well-known CNN architectures and how their building blocks affect their receptive field. We propose several systematic approaches to control the RF of CNNs and systematically test the resulting architectures on different audio classification and tagging tasks and datasets. The experiments show that regularizing the RF of CNNs using our proposed approaches can drastically improve the generalization of models, out-performing complex architectures and pre-trained models on larger datasets. The proposed CNNs achieve state-of-the-art results in multiple tasks, from acoustic scene classification to emotion and theme detection in music to instrument recognition, as demonstrated by top ranks in several pertinent challenges (DCASE, MediaEval).

Every year, new Convolutional Neural Network (CNN) architectures appear to deal with different problems in the activity of image and video recognition. These architectures usually work along the ImageNet dataset for looking for the best performance of the CNNs without taking into account the video task where they are used. This can represent a problem if the task is Human Action Recognition (HAR) in video, since the CNN architectures are pre-trained with an image dataset that can practically contain any object, while HAR problem requires consecutive frames of people doing actions. To prove the idea that using CNNs pre-trained on an image dataset does not always achieve the best performance on a video dataset and that, therefore, it is worth comparing the performance of different CNNs under similar circumstances for the HAR problem, this work proposes an analysis between eight different CNN architectures. Each one of the CNN was exclusively trained with RGB images, which were extracted from the frames of the different classes of videos of HMDB51 dataset. To make the classification of an activity in video, we average the predictions taking into account the successes. We also made some ensembles with the best performance CNNs to measure the improvement in accuracy. Our results suggest that Xception is a strong baseline model that could be used by the community to make their comparisons of their proposals more robust.

Classification performance based on ImageNet is the de-facto standard metric for CNN development. In this work we challenge the notion that CNN architecture design solely based on ImageNet leads to generally effective convolutional neural network (CNN) architectures that perform well on a diverse set of datasets and application domains. To this end, we investigate and ultimately improve ImageNet as a basis for deriving such architectures. We conduct an extensive empirical study for which we train 500 CNN architectures, sampled from the broad AnyNetX design space, on ImageNet as well as 8 additional well-known image classification benchmark datasets from a diverse array of application domains. We observe that the performances of the architectures are highlydataset dependent. Some datasets even exhibit a negative error correlation with ImageNet across all architectures. We show how to significantly increase these correlations byutilizing ImageNet subsets restricted to fewer classes. These contributions can have a profound impact on the way we design future CNN architectures and help alleviate the tilt we see currently in our community with respect to over-reliance on one dataset.

Ultrasound (US) is the preferred modality for fatty liver disease diagnosis due to its noninvasive, real-time, and cost-effective imaging capabilities. However, traditional B-mode US is qualitative, and therefore, the assessment is very subjective. Computer-aided diagnostic tools can improve the specificity and sensitivity of US and help clinicians to perform uniform diagnoses. In this work, we propose a novel deep learning model for nonalcoholic fatty liver disease classification from US data. We design a multi-feature guided multi-scale residual convolutional neural network (CNN) architecture to capture features of different receptive fields. B-mode US images are combined with their corresponding local phase filtered images and radial symmetry transformed images as multi-feature inputs for the network. Various fusion strategies are studied to improve prediction accuracy. We evaluate the designed network architectures on B-mode in vivo liver US images collected from 55 subjects. We also provide quantitative results by comparing our proposed multi-feature CNN architecture against traditional CNN designs and machine learning methods. Quantitative results show an average classification accuracy above 90% over tenfold cross-validation. Our proposed method achieves a 97.8% area under the ROC curve (AUC) for the patient-specific leave-one-out cross-validation (LOOCV) evaluation. Comprehensive validation results further demonstrate that our proposed approaches achieve significant improvements compared to training mono-feature CNN architectures ([Formula: see text]). Feature combination is valuable for the traditional classification methods, and the use of multi-scale CNN can improve liver classification accuracy. Based on the promising performance, the proposed method has the potential in practical applications to help radiologists diagnose nonalcoholic fatty liver disease.

Porosity severely reduces the mechanical performance of composite laminates and methods for automatic segmentation of void phases are growing. This study investigates porosity in composite materials that take the form of interlaminar voids and dry tow areas. Deep Learning was used for the segmentation of X-ray micrographs via the implementation of eight state-of-the-art Convolutional Neural Network (CNN) architectures trained with data sets containing twenty-five, fifty, and one-hundred images. The combination of hyperparameters providing the highest accuracy for each architecture and training set size was achieved through the optimisation of six relevant hyperparameters, including the cut-off probability applied to output probability maps. Additionally, the properties of the CNN architectures ( e.g., layer typology, connections, density…) were found to play a determining role, not only in the segmentation results but also in the associated computing effort. U-Net and FCDenseNet outperformed the FCN-8s, FCN-16, SegNet, LinkNet, ResNet18 and Xception CNN architectures. However, the CNNs generally outperformed the standard thresholding approaches, especially in sub-volumes containing low porosity (1.07%) where the influence on strength is very sensitive in high-performance composites. In low porosity samples, U-Net and FCDenseNet consistently segmented voids to 85% + accuracy, whereas thresholding was only half as accurate, at around 40%. The results provide a strong motivation to replace thresholding as a segmentation method for composite X-ray micrographs. In terms of efficiency, the reduced complexity of the U-Net network allowed for an average reduction of the training time (−36%) and prediction time (−17%) when compared to FCDenseNet.

Early detection and diagnosis of plant diseases is critical for ensuring global food security and sustainable agricultural practices. This review comprehensively examines latest advancements in crop disease risk prediction, onset detection through imaging techniques, machine learning (ML), deep learning (DL), and edge computing technologies. Traditional disease detection methods, which rely on visual inspections, are time-consuming, and often inaccurate. While chemical analyses are accurate, they can be time consuming and leave less flexibility to promptly implement remedial actions. In contrast, modern techniques such as hyperspectral and multispectral imaging, thermal imaging, and fluorescence imaging, among others can provide non-invasive and highly accurate solutions for identifying plant diseases at early stages. The integration of ML and DL models, including convolutional neural networks (CNNs) and transfer learning, has significantly improved disease classification and severity assessment. Furthermore, edge computing and the Internet of Things (IoT) facilitate real-time disease monitoring by processing and communicating data directly in/from the field, reducing latency and reliance on in-house as well as centralized cloud computing. Despite these advancements, challenges remain in terms of multimodal dataset standardization, integration of individual technologies of sensing, data processing, communication, and decision-making to provide a complete end-to-end solution for practical implementations. In addition, robustness of such technologies in varying field conditions, and affordability has also not been reviewed. To this end, this review paper focuses on broad areas of sensing, computing, and communication systems to outline the transformative potential of end-to-end solutions for effective implementations towards crop disease management in modern agricultural systems. Foundation of this review also highlights critical potential for integrating AI-driven disease detection and predictive models capable of analyzing multimodal data of environmental factors such as temperature and humidity, as well as visible-range and thermal imagery information for early disease diagnosis and timely management. Future research should focus on developing autonomous end-to-end disease monitoring systems that incorporate these technologies, fostering comprehensive precision agriculture and sustainable crop production.

The convolutional neural network (CNN) architecture has shown remarkable success in image classification and segmentation. Its popularity has increased promptly due to various factors such as exponential growth in computational resources, availability of benchmark datasets, supporting libraries, and open-source software. The efficiency of CNN architecture majorly depends on the complexity of the architecture, availability of datasets, and hyperparameter selection. But, due to the huge number of parameters in CNN architecture, its selection has completely remained ad hoc in the past works. In this article, a novel encoding technique has been proposed that can represent complex CNN architecture effectively. The article defines basic building blocks to represent CNN architecture such as the genesis block, transit block, agile block, and output block. This encoding structure is used to generate dynamic length chromosome structure and initialized using evolutionary algorithms. A comparative analysis is also presented that shows compared its effectiveness with existing encoding representations on the basis of the number of encoding parameters, training cost, and efficiency.

Although font recognition is a fundamental issue in the field of document analysis and recognition, it was usually ignored in the past. With the development of optical character recognition (OCR), font recognition becomes more and more important. This paper proposed a well-designed convolutional neural network (CNN) architecture for traditional Mongolian font recognition by means of a single word. To be specific, the whole word image is regarded as input of CNN. Hence, the word images should be normalized into the same size before being inputted into CNN. By comparison, an appropriate aspect ratio for the traditional Mongolian word images has been determined. Experimental results demonstrate that the proposed CNN architecture outperforms three classic CNN architectures, including LeNet-5, AlexNet and GoogLeNet. Therefore, the proposed CNN is much more suitable for the task of the traditional Mongolian font recognition in the way of a single word.

Bangla handwritten character recognition is a popular research topic as its difficulty is higher than the recognition of other languages because of multiple formats of compound characters. State of the art Convolutional neural network (CNN) architectures are very much useful in computer vision applications. Some works have been carried out in Bangla handwritten character recognition but most of them either not very efficient or they can not classify a lot of characters. In this work, state of art pre-trained CNN architectures is used to classify 231 different Bangla handwritten characters using CMATERdb dataset. The images were first converted to B&W form with white as the foreground color. The size of the images is reduced to 28 × 28 form. These images are used as input to the CNN architectures. The weights of the state-of-the-art CNN models are kept as it was. The training learning rate was set to 0.001 and categorical cross-entropy as the error function. After 50 epochs, InceptionResNetV2 achieved the best accuracy (96.99%). DenseNet121 and InceptionNetV3 also provided remarkable recognition accuracy (96.55 and 96.20%, respectively). We also considered combination of trained InceptionResNetV2, InceptionNetV3 and DenseNet121 architectures which provided better recognition accuracy (97.69%) than other single CNN architectures but it is not feasible for using as it requires a lot of computation power and memory. The models were tested in the cases where characters look confusing to humans, but all the architectures showed equal capability in recognizing these images. Considering computational complexity, memory and capability of recognizing confused characters, InceptionResNetV2 can be said as the best performing model.