Analysis and Optimization of Real-time Performance of High-speed Train Communication Network

In this paper, a multi-objective particle swarm optimization algorithm based on the relative distance strategy is proposed to realize hydrodynamic coefficient identification, which can improve the accuracy of parameter identification without determining the weight manually. Firstly, single-objective particle swarm optimization (PSO) is used to identify the parameters of the model with a low coupling degree. Then, the parameters of the strongly coupled sway and yaw motion model are regarded as multi-objective, and a set of unbiased Pareto optimal solutions are obtained by the multi-objective particle swarm optimization (MOPSO) algorithm. Then the distance function of the Pareto solution is constructed to determine the parametric solution of the model. Finally, experimental identification is carried out by using the data set collected from the real ship. Experimental results show that the accuracy of model parameters obtained by this identification method is about 91.6%, and there is no need to set the weighting coefficient.

Battle Royale Optimizer (BRO) is a recently proposed optimization algorithm that has added a new category named game-based optimization algorithms to the existing categorization of optimization algorithms. Both continuous and binary versions of this algorithm have already been proposed. Generally, optimization problems can be divided into single-objective and multi-objective problems. Although BRO has successfully solved single-objective optimization problems, no multi-objective version has been proposed for it yet. This gap motivated us to design and implement the multi-objective version of BRO (MOBRO). Although there are some multi-objective optimization algorithms in the literature, according to the no-free-lunch theorem, no optimization algorithm can efficiently solve all optimization problems. We applied the proposed algorithm to four benchmark datasets: CEC 2009, CEC 2018, ZDT, and DTLZ. We measured the performance of MOBRO based on three aspects: convergence, spread, and distribution, using three performance criteria: inverted generational distance, maximum spread, and spacing. We also compared its obtained results with those of three state-of-the-art optimization algorithms: the multi-objective Gray Wolf optimization algorithm (MOGWO), the multi-objective particle swarm optimization algorithm (MOPSO), the multi-objective artificial vulture's optimization algorithm (MOAVAO), the optimization algorithm for multi-objective problems (MAOA), and the multi-objective non-dominated sorting genetic algorithm III (NSGA-III). The obtained results approve that MOBRO outperforms the existing optimization algorithms in most of the benchmark suites and operates competitively with them in the others.

A method for designing miniaturized frequency selective surface (FSS) using equivalent circuit model (ECM) and multi-objective particle swarm optimization (MOPSO) algorithm is proposed in this paper. In the proposed method, ECM describing the desired frequency response is established, and parameters of the ECM are determined using the MOPSO algorithm. Combining the ECM analysis and the MOPSO algorithm, the requirements of desired frequency response can be converted into the constraints of equivalent circuit parameters, which simplifies the optimization process of FSS design. For verification, a single-layer bandstop-bandpass FSS composed of convoluted elements with the unit cell size of 0.073λ 0 × 0.073λ 0 is designed. Simulation results show that the −15 dB bandwidth is from 2.62 to 2.83 GHz, and the −0.5 dB bandwidth is from 3.84 to 5 GHz. Meanwhile, the resonant frequency is stable at different incident angles (up to 80°) under TE and TM polarization. Finally, the proposed FSS prototype is fabricated and measured. The measured results agree well with the simulated ones.

While a fairly large number of databases exist that provide impaired video sequences designed for the development and evaluation of Quality of Experience (QoE) approaches, the impairments due to transmission errors resulting in packet loss in these databases are based on simulation of small number of scenarios and not representative of real transmission scenarios that arise in end-to-end transmission of multimedia to mobile devices. This paper proposes a solution to this problem in the form of a framework for recording real packet drops as they occur in different situations of wireless multimedia transmission to mobile devices. The logs can be used to generate realistic impairments, as well as design new highly-efficient quality assessment approaches based on monitoring network performance in real time. An Android-based mobile device is used to receive streamed H.264 videos and real Real-time Transport Protocol (RTP) packet reception sequences (traces) are recorded. To evaluate the approach and the impact of different transmission scenarios on perceived quality, a study of the quality experienced by the users in 3 different real wireless transmission scenarios was conducted and the results are presented in the paper, showing that they diverge significantly from the packet-loss sequences usually considered in quality of experience studies.

This paper deals with the optimal placement of distributed generation (DG) units in distribution systems via an enhanced multi-objective particle swarm optimization (EMOPSO) algorithm. To pursue a better simulation of the reality and provide the designer with diverse alternative options, a multi-objective optimization model with technical and operational constraints is constructed to minimize the total power loss and the voltage fluctuation of the power system simultaneously. To enhance the convergence of MOPSO, special techniques including a dynamic inertia weight and acceleration coefficients have been integrated as well as a mutation operator. Besides, to promote the diversity of Pareto-optimal solutions, an improved non-dominated crowding distance sorting technique has been introduced and applied to the selection of particles for the next iteration. After verifying its effectiveness and competitiveness with a set of well-known benchmark functions, the EMOPSO algorithm is employed to achieve the optimal placement of DG units in the IEEE 33-bus system. Simulation results indicate that the EMOPSO algorithm enables the identification of a set of Pareto-optimal solutions with good tradeoff between power loss and voltage stability. Compared with other representative methods, the present results reveal the advantages of optimizing capacities and locations of DG units simultaneously, and exemplify the validity of the EMOPSO algorithm applied for optimally placing DG units.

This paper deals with a multi-objective unequal sized dynamic facility layout problem (DFLP) with pickup/drop-off locations. First, a mathematical model to obtain optimal solutions for small size instances of the problem is developed. Then, a multi-objective particle swarm optimisation (MOPSO) algorithm is implemented to find near optimal solutions. Two new heuristics to prevent overlapping of the departments and to reduce ‘unused gaps’ between the departments are introduced. The performance of the MOPSO is examined using some sets of available test problems in the literature and various random test problems in small, medium, and large sizes. The percentage of improvements on the initial solutions is calculated for small, medium and large size instances. Also, the generation metric and the space metric for non-dominated solutions are examined. These experiments show the good performance of the developed MOPSO and sensitivity analysis show the robustness of the obtained solutions.

The current paper presents a novel multi-objective particle swarm optimization (MOPSO) algorithm for solving no-wait flow shop scheduling problems with makespan and maximum tardiness criteria. First, in the algorithm, particles are represented as job permutations and updated directly in the discrete domain. Second, the concept of Pareto dominance is applied to compare different solutions of multi-objective optimization, and a set is employed to hold and to update the obtained non-dominated solutions, where a randomly selected non-dominated solution is assigned as the global best particle to maintain the diversity of the searching direction and to speed up the convergence process to the Pareto front. Third, a new multi-objective heuristic, named the PWQ (Pan—Wang—Qian) heuristic, is proposed to produce a population of initial particles with relatively good performances. Fourth, a simple but effective multi-objective local search algorithm is developed to embed in the MOPSO algorithm for stressing the balance between global exploration and local exploitation. In addition, two speed-up methods are devised to evaluate a job permutation and its insert neighbourhood respectively. Computational simulation results based on the well-known benchmarks and statistical performance comparisons are provided. It is shown that the proposed algorithm is superior to a recently published multi-objective hybrid differential evolution (MHDE) algorithm in terms of searching quality, diversity level, robustness, and efficiency.

A novel approach to hybrid dynamic environmental-economic dispatch of multi-energy complementary virtual power plant considering renewable energy generation uncertainty and demand response

An integrated optimization strategy based on Kriging model and multi-objective particle swarm optimization (PSO) algorithm was constructed. As a new surrogate model technology, Kriging model has better fitting precision for nonlinear problem. The Kriging model was adopted to replace computer aided engineering (CAE) simulation as fitness function of multi-objective PSO algorithm, and the computation cost can be reduced greatly. By introducing multi-objective handling mechanism of crowding distance and mutation operator to multi-objective PSO algorithm, the entire Pareto front can be approximated better. It is shown that the multi-objective optimization strategy can get higher solving accuracy and computation efficiency under small sample.

A multi-objective particle swarm optimization algorithm based on two-archive mechanism

This paper addresses a multi-objective approach for simultaneous dynamic expansion planning of conventional sub-transmission grid and Regional Virtual Power Plant (RVPP). In such a feed-in tariff electricity market, it will assist RVVP’s stakeholders in deciding whether or not they should invest in new equipment’s installation. A Multi-Objective Particle Swarm Optimization (MOPSO) algorithm as a heuristic optimization method is proposed to eliminate the conventional centralized planning, which has led to competition between Regional Electric Company (REC) and RVPP for power delivery in sub-transmission system. Two objective functions are considered for simultaneous expansion planning of these two systems. The first one takes the minimum cost of the REC, as the sub-transmission grid operator, into account while the other one considers profit maximization for RVPP. To achieve the goals, MOPSO algorithm is employed to find the best expansion of REC and best location and capacity of RVPP’s resources. Having solved the proposed multi-objective optimization problem, a Pareto front is determined to show the trade-off between REC and RVPPs' contributions in joint optimal expansion planning of conventional sub-transmission grid and the RVPP. To demonstrate the applicability and effectiveness of the proposed approach, a realistic sub-transmission system in Guilan Province, Iran is used as a test system, and the results are evaluated accordingly.

The selection of variational mode decomposition (VMD) parameters usually adopts the empirical method, trial-and-error method, or single-objective optimization method. The above-mentioned method cannot achieve the global optimal effect. Therefore, a multi-objective particle swarm optimization (MOPSO) algorithm is proposed to optimize the parameters of VMD, and it is applied to the composite fault diagnosis of the gearbox. The specific steps are: first, symbol dynamic entropy (SDE) can effectively remove background noise, and use state mode probability and state transition to preserve fault information. Power spectral entropy (PSE) reflects the complexity of signal frequency composition. Therefore, the SDE and PSE are selected as fitness functions and then the Pareto frontier optimal solution set is obtained by the MOPSO algorithm. Finally, the optimal combination of VMD parameters (k, a) is obtained by normalization. The improved VMD is used to analyze the simulation signal and gearbox fault signal. The effectiveness of the proposed method is verified by comparing with the ensemble empirical mode decomposition (EEMD).

This study employs a multi-objective particle swarm optimization (MOPSO) algorithm to address the dual-objective challenge in the robotic polishing of Ti-6Al-4V. The aim is to determine optimal parameters that minimize surface roughness while maximizing the material removal rate (MRR), thereby improving both surface quality and processing efficiency. First, a material removal depth model for end-face polishing is established based on Preston's equation and theoretical analysis, from which the MRR model is derived. Subsequently, orthogonal experiments are conducted to investigate the influence of process parameters and their interactions on surface roughness, followed by the development of a quadratic polynomial roughness prediction model. Analysis of variance (ANOVA) and model validation confirm the model's reliability. Finally, the MOPSO algorithm is applied to obtain the Pareto optimal solution set, yielding the optimal parameter combination. Experimental results demonstrate that at a normal contact force of 7.58 N, a feed rate of 4.52 mm/s, and a spindle speed of 5851 rpm, the achieved MRR and Ra values are 0.2197 mm3/s and 0.291 μm, respectively. These results exhibit errors of only 5.64% and 2.65% compared to model predictions, validating the proposed method's effectiveness.

ABSTRACTTo reduce the content of MgO in the slag, which helps in lowering production costs, the chemical components of a SiO2–CaO–MgO–Al2O3–TiO2 blast furnace (BF) slag system with high Al2O3 content were optimised using the multi-objective particle swarm optimisation (MOPSO) algorithm. First, models for predicting the metallurgical properties of BF slag were established and verified, based on mixture experimental designs and the ion and molecule coexistence theory. Second, the problem was solved by MOPSO using the MATLAB software package. Optimisation results show that the appropriate content of MgO in the slag should be 4–7%, and the MgO/Al2O3 ratio should be 0.2–0.6. Finally, optimised solutions were used in the 3200 m3 BF of a steel company in China. MgO in the slag was reduced to less than 5%, the MgO/Al2O3 ratio was controlled at 0.3–0.4, and the fuel ratio remained at 515 kg t−1.

Multi-objective particle swarm optimization model for conjunctive use of treated wastewater and groundwater