Analysis of Segmentation Techniques for Synthetic Aperture RADAR Image Processing Applications

In general, synthetic aperture radar (SAR) imaging and image processing are two sequential steps in SAR image processing. Due to the large size of SAR images, most image processing algorithms require image segmentation before processing. However, the existence of speckle noise in SAR images, as well as poor contrast and the uneven distribution of gray values in the same target, make SAR images difficult to segment. In order to facilitate the subsequent processing of SAR images, this paper proposes a new method that combines the back-projection algorithm (BPA) and a first-order gradient operator to enhance the edges of SAR images to overcome image segmentation problems. For complex-valued signals, the gradient operator was applied directly to the imaging process. The experimental results of simulated images and real images validate our proposed method. For the simulated scene, the supervised image segmentation evaluation indexes of our method have more than 1.18%, 11.2% and 11.72% improvement on probabilistic Rand index (PRI), variability index (VI), and global consistency error (GCE). The proposed imaging method will make SAR image segmentation and related applications easier.

The usage of a hypersonic platform for remote sensing application has promising prospects, especially for hypersonic platform-borne synthetic aperture radar (SAR) imaging. However, the high-speed of hypersonic platform will lead to extreme friction between the platform and air, which will cause the ionization of air. The ionized gas forms the plasma sheath wrapped around the hypersonic platform. The plasma sheath will severely affect the propagation of SAR signal and further affect the SAR imaging. Therefore, hypersonic platform-borne SAR imaging should be studied from a physical perspective. In this paper, hypersonic platform-borne SAR imaging under plasma sheath is analyzed. The SAR signal propagation in plasma sheath is computed using scatter matrix method. The proposed SAR signal model is verified by using a ground experiment system. Moreover, the effect of attenuation caused by plasma sheath on SAR imaging is studied under different SAR parameters and plasma sheath. The result shows that attenuation caused by plasma sheath will degrade the SAR imaging quality and even cause the point and area targets to be submerged into the noise. The real SAR images under plasma sheath also illustrate this phenomenon. Furthermore, by studying imaging results under different SAR and plasma parameters, it can be concluded that the severe degradation of SAR imaging quality appears at condition of high plasma sheath electron density and low SAR carrier frequency. The work in this paper will be beneficial for the study of hypersonic platform-borne SAR imaging and design of hypersonic SAR imaging systems in the future.

ABSTRACTAutomatic Target Recognition (ATR) based on Synthetic Aperture Radar (SAR) images plays a key role in military applications. However, there are difficulties with this traditional recognition method. Principally, it is a challenge to design robust features and classifiers for different SAR images. Although Convolutional Neural Networks (CNNs) are very successful in many image classification tasks, building a deep network with limited labeled data remains a problem. The topologies of CNNs like the fully connected structure will lead to redundant parameters and the negligence of channel-wise information flow. A novel CNNs approach, called Group Squeeze Excitation Sparsely Connected Convolutional Networks (GSESCNNs), is therefore proposed as a solution. The group squeeze excitation performs dynamic channel-wise feature recalibration with less parameters than squeeze excitation. Sparsely connected convolutional networks are a more efficient way to operate the concatenation of feature maps from different layers. Experimental results on Moving and Stationary Target Acquisition and Recognition (MSTAR) SAR images, demonstrate that this approach achieves, at 99.79%, the best prediction accuracy, outperforming the most common skip connection models, such as Residual Networks and Densely Connected Convolutional Networks, as well as other methods reported in the MSTAR dataset.

Synthetic aperture radar (SAR) imaging processing is a complex operation that requires a large amount of floating point computations. It is very time-consuming to convert SAR raw data into imagery on microcomputers. The authors have successively developed SAR processors using two kinds of computers-JN3AR of distributed memory multiprocessor architecture (made in China), and SGI Origin 200 of scalable shared memory multiprocessor architecture. The SAR imaging efficiency has been greatly improved.

Although Synthetic Aperture Radar (SAR) can capture rich land cover information as a most important advanced technique in the field of international earth observation, the application effects still limited significantly. The reason is that the study of SAR imaging processing, SAR image processing and SAR applications are conducted respectively, the integrated study are lacked for parameter selection of SAR imaging processing and SAR image processing and targets identification of SAR application. Focusing on above science problems, the study for phase high fidelity model of high precision interferometric SAR, SAR non-stationary backscattering characteristics and cognition, SAR three-dimensional electromagnetic scattering modeling and its scattering mechanism and SAR multi-parameters optimization information extraction has been conducted. The typical natural distributed targets and man-made targets such as surface deformation, sea ice, building complex and collapsed building are selected, the method and application study oriented to SAR environmental parameters inversion are conduced, the main result and conclusion are as follows: (1) The overall theoretical frames of SAR information integrated processing was proposed; The simulation and ground validation system used to assess the effects of SAR information integrated processing was created; furthermore, the spaceborne SAR imaging algorithm with three steps focusing processing was proposed and realized the multi-modal integrated imaging processing and improved the imaging processing precision. (2) In terms of SAR information integrated processing of natural targets, focusing on phase high fidelity imaging processing of interferometric SAR surface deformation monitoring, an novel spaceborne SAR high fidelity simulation method based on stationary RCS and improved Goldstein SAR interferogram filter based on empirical mode decomposition were proposed. Focusing on multi-parameters optimization processing of sea ice types classification, the multi-channel spaceborne SAR sparse imaging method based on compressive sensing, Kalman filter for removal of scalloping and inter-scan banding in ScanSAR images and SVM sea ice classification method combined with sea ice concentration were proposed. (3) In terms of SAR information integrated processing of man-made targets, focusing on non-stationary backscattering from building complex, mitigation of azimuth ambiguities in spaceborne stripmap SAR iamges using selective restoration, SAR image despeckling by selective 3D filtering of multiple compressive reconstructed images and man-made target detection in urban areas based on a new azimuth stationary extraction method were proposed. Focusing on three-dimensional modeling and fast extraction of collapsed building, H-a-p method used for collapsed building extraction was proposed.

The purpose of the paper is to extract the region of interest (ROI) from the coarse detected synthetic aperture radar (SAR) images and discriminate if the RO I contains a target or not, so as to eliminate the false alarm, and prepare for the target recognition. Th e automatic target clustering is one of the most difficult tasks in the SAR-image automatic target recognition system. The density-based spatial clustering of applications with noise (DBSCAN) relies on a density-based notion of clusters which is designed to discover clusters of arbitrary shape. DBSCAN was first used in the SAR image processing, which has many excellent features: only two insensitivity parameters (radius of neighborhood and minimum number of points) are needed; clusters of arbitrary shapes which fit in with the coarse detected SAR images can be discovered; and the cal culation time and memory can be reduced. In the multi-feature ROI discrimination scheme, we extract several target features which contain the geometry features such asthe area discriminator and Radon -transform based target profile discriminator, the distribution characteristics such as the EFF discrimina tor, and the EM scattering property such as the PPR discriminator. The synthesized judgment effectively eliminates the false alarms. Keywords: automatic target recognition, synthetic aperture radar images,

In this review paper, several studies and researches were surveyed for assisting future researchers to identify available techniques in the field of classification of Synthetic Aperture Radar (SAR) images. SAR images are becoming increasingly important in a variety of remote sensing applications due to the ability of SAR sensors to operate in all types of weather conditions, including day and night remote sensing for long ranges and coverage areas. Its properties of vast planning, search, rescue, mine detection, and target identification make it very attractive for surveillance and observation missions of Earth resources. With the increasing popularity and availability of these images, the need for machines has emerged to enhance the ability to identify and interpret these images effectively. This is due to the fact that SAR image processing requires the formation of an image from the measured radar scatter returns, followed by a treatment to discover and define the image's composition. After reviewing several previous studies that succeeded in achieving a classification of SAR images for specific goals, it became obvious that they could be generalized to all types of SAR images. The most prominent use of Convolutional Neural Networks (CNN) was successful in extracting features from the images and training the neural network to analyze and classify them into classes according to these features. The dataset used in this model was obtained from the Moving and Stationary Target Acquisition and Recognition (MSTAR) database, which consists of a set of SAR images of military vehicles, for which the application of the CNN approach achieved a final accuracy of 97.91% on ten different classes.

This paper proposes a novel method on Synthetic Aperture Radar (SAR) Image denoising, which is based on context modeling combined with multiscale orthogonal bandlet coefficients. For the main influence of SAR image is multiplicative speckle noise, the logarithm uniform transform is used to convert it to additive noise. In this paper, the multiscale orthogonal bandlet transform is applied to noisy SAR Image. The contextual model is used to compute contextual values of bandlet coefficients on each scale. Therefore, bandlet coefficients are reconstructed into some parts by contextual values. The spatially adaptive soft-threshold (T) is to denoise SAR image in each part. Experimental results demonstrate that this method outperforms the methods of Ehance-Lee (E-lee), contextual model based on wavelet domain (Wavelet-context), and Hidden Markov Tree model bases on wavelet domain (Wavelet-hmt) on there indexes: Floating index (FI), Standard deviation and Edge saving index of vertical direction, by using a real SAR image. However, the method can not only reduce the speckle noise but also preserve edges and high frequency information, and gets considerable visual effect on SAR Image denoising.

ABSTRACTThe speckle noise of synthetic aperture radar (SAR) images limits its application in change detection. Compared with improved ratio (IR) and log-ratio (LR) operators, the neighborhood-based ratio (NR) technique can restrain the influence of speckle noise and is more suitable for change detection in SAR images. However, we find three drawbacks of NR by analyzing this method carefully. To overcome these defects, we propose an improved neighborhood-based ratio (INR) approach for change detection in SAR images. INR restructures the NR operator to exploit the neighborhood information more reasonably and is expected to reduce the impact of speckle noise better. IR, LR, mean ratio operator, NR, and INR are tested on two data sets to compare their performances in change detection of SAR images. Experimental results show that the proposed method can obtain better difference image than other state-of-art methods and improve the accuracy of change detection in SAR images effectively.

We address the application of model-supported exploitation techniques to synthetic aperture radar (SAR) imagery. The emphasis is on monitoring SAR imagery using wide area 2D and/or 3D site models along with contextual information. We consider here the following tasks useful in monitoring: (a) site model construction using segmentation and labeling techniques, (b) target detection, (c) target classification and indexing, and (d) SAR image-site model registration. The 2-D wide area site models used here for SAR image exploitation differ from typical site models developed for RADIUS applications, in that they do not model specific facilities, but constitute wide area site models of cultural features such as urban clutter areas, roads, clearings, fields, etc. These models may be derived directly from existing site models, possibly constructed from electro-optical (EO) observations. When such models are not available, a set of segmentation and labeling techniques described here can be used for the construction of 2D site models. The use of models can potentially yield critical information which can disambiguate target signatures in SAR images. We address registration of SAR and EO images to a common site model. Specific derivations are given for the case of registration within the RCDE platform. We suggest a constant false alarm rate (CFAR) detection scheme and a topographic primal sketch (TPS) based classification scheme for monitoring target occurrences in SAR images. The TPS of an observed target is matched against candidate targets TPSs synthesized for the preferred target orientation, inferred from context (e.g. road or parking lot targets). Experimental results on real and synthetic SAR images are provided.

Synthetic aperture radar (SAR) image segmentation is the key to SAR image automatic interpretation. However, speckle noise, intensity inhomogeneity, and irregular shaped objects with changing edge often make the SAR image segmentation very difficult, and existing algorithms have high computational complexity. We propose a region-based level set method using the local image intensity information. To represent the statistical characteristics of speckle noise, we first use a gamma statistical distribution to model every segmented SAR image. We then apply a modified region mean estimation formula to efficiently segment SAR images with inhomogeneity. Finally, Gaussian filtering is employed to regularize the level set function, which can avoid reinitialization. The experimental results on synthetic and real-world SAR images demonstrate that the proposed method has less computation cost, faster convergence rate, and more accurate segmentation results.

Synthetic Aperture Radar (SAR) images are prone to be contaminated by noise, which makes it very difficult to perform target recognition in SAR images. Inspired by great success of very deep convolutional neural networks (CNNs), this paper proposes a robust feature extraction method for SAR image target classification by adaptively fusing effective features from different CNN layers. First, YOLOv4 network is fine-tuned to detect the targets from the respective MF SAR target images. Second, a very deep CNN is trained from scratch on the moving and stationary target acquisition and recognition (MSTAR) database by using small filters throughout the whole net to reduce the speckle noise. Besides, using small-size convolution filters decreases the number of parameters in each layer and, therefore, reduces computation cost as the CNN goes deeper. The resulting CNN model is capable of extracting very deep features from the target images without performing any noise filtering or pre-processing techniques. Third, our approach proposes to use the multi-canonical correlation analysis (MCCA) to adaptively learn CNN features from different layers such that the resulting representations are highly linearly correlated and therefore can achieve better classification accuracy even if a simple linear support vector machine is used. Experimental results on the MSTAR dataset demonstrate that the proposed method outperforms the state-of-the-art methods.

Synthetic Aperture Radar (SAR) image edge detection is one of the important steps for earth observation and target recognition,and it is recognized a difficult problem by domestic and foreign researchers because of the presence of speckle noise. A study was undertaken in this paper to speckle noise suppression and edge detail holding for SAR image edge detection, and we present an intelligent edge detection approach based on fuzzy theory and information fusion. Some typical SAR images were selected for edge detection using this approach in order to verify the result of relevant speckle noise suppression and edge detail holding. Results shows that this method can effectively inhibit the SAR image speckle noise and has smart edge detection ability. Unlike classical SAR image edge detection methods, this approach is a comprehensive integrated of different intelligent information processing methods, and it shows good robustness and universality.

Synthetic aperture radar (SAR) images often face problems such as coherent speckle noise, low contrast and complex target geometric characteristics due to their unique coherent imaging mechanism, which limits the performance of traditional target detection methods. This paper proposes a target detection technology based on deep learning guided by the physical mechanism of synthetic aperture radar (SAR) imaging. By integrating SAR electromagnetic scattering characteristics and data-driven features, a highly interpretable and high-precision detection model is constructed to solve the problems of missed alarms, false alarms and insufficient multi-category recognition accuracy in traditional methods in SAR image processing. By introducing an anchor-free mechanism, a dynamic sample allocation strategy and a spatial topological structure construction method, the network can effectively extract the physical and semantic features of SAR images and improve the accuracy and interpretability of target detection. Experimental results show that this method significantly improves the detection performance in complex scenes, providing technical support for the application of SAR images in environmental monitoring, disaster assessment and other fields.

Synthetic aperture radar (SAR) images are corrupted by speckle noise due to random interference of electromagnetic waves. In this paper, we proposed a speckle reduction technique based on sparse representation and dictionary learning. Firstly, an adaptive dictionary was learned by performing KSVD algorithm through a large amount of training patches extracted from the noisy SAR image. Considering the inaccurate recovery of point targets which is brought by the inadequate number of training samples, we employed a point target enhancing scheme to highlight the important point targets in the SAR image. Some experiments were conducted on real SAR images, and the results shows that our proposed algorithm can effectively reduce the speckle noise as well as preserve details. Some comparisons are made to prove its superiority to the available algorithms.