Anomaly Detection in IoT Using Extended Isolation Forest

The Internet of Things (IoT) has revolutionised the way people live and work, and its increasing popularity has led to the widespread adoption of smart homes. However, the lack of interoperability among IoT devices and systems used in smart homes limits their capacity to enhance the user experience and improve energy efficiency. Therefore, this study focuses on improving interoperability between various IoT systems and devices. It was anticipated that the research would contribute to the creation of a more cohesive and integrated smart home environment by helping to develop a data analytics framework that enables the integration and analysis of data from various devices. The study then produces an intended user design strategy for smart homes that takes into account users' wants, preferences, and behaviours during the design phase. The goal of this project was to create smart houses that are more intelligent, environmentally green, and user-friendly and that will benefit both individuals and the whole society.

This research introduces a comprehensive collaborative intrusion detection system (CIDS) framework aimed at bolstering the security of Internet of Things (IoT) environments by synergistically integrating lightweight architecture, trust management, and privacy-preserving mechanisms. The proposed hierarchical architecture spans edge, fog, and cloud layers, ensuring efficient and scalable collaborative intrusion detection. Trustworthiness is established through the incorporation of distributed ledger technology (DLT), leveraging blockchain frameworks to enhance the reliability and transparency of communication among IoT devices. Furthermore, the research adopts federated learning (FL) techniques to address privacy concerns, allowing devices to collaboratively learn from decentralized data sources while preserving individual data privacy. Validation of the proposed approach is conducted using the CICIoT2023 dataset, demonstrating its effectiveness in enhancing the security posture of IoT ecosystems. This research contributes to the advancement of secure and resilient IoT infrastructures, addressing the imperative need for lightweight, trust-managing, and privacy-preserving solutions in the face of evolving cybersecurity challenges. According to our experiments, the proposed model achieved an average accuracy of 97.65%, precision of 97.65%, recall of 100%, and F1-score of 98.81% when detecting various attacks on IoT systems with heterogeneous devices and networks. The system is a lightweight system when compared with traditional intrusion detection that uses centralized learning in terms of network latency and memory consumption. The proposed system shows trust and can keep private data in an IoT environment.

The Internet of Things (IoT) has had a considerable influence on our daily lives by enabling enhanced connection of devices, systems, and services that extends beyond machine-to-machine interactions and encompasses a wide range of protocols, domains, and applications. However, despite privacy concerns shown by IoT users, little has been done to reduce and protect individual information exposure. It is extremely difficult to mitigate IoT devices from reidentification threats which is why it is still a major challenge for IoT users to securely protect their information. The trust controls how we regulate privacy in our IoT platforms in the same way that it governs personal relationships. As IoT devices become increasingly linked, more data is shared across individuals, businesses, governments, and ecosystems. Technologies, sensors, machines, data, and cloud connections all rely largely on trust relationships that have been formed. With the rapid growth of additional types of IoT devices that are being introduced, it, therefore, expands privacy concerns and is difficult to develop trust with an IoT system or device without the option to regulate information privacy settings. Privacy has always been a barrier for many devices as they race for the early adoption of IoT technologies. Several Internet of Things devices or systems will continue to pose privacy threats. As a result, the main objective of this study was to examine the individual understanding of privacy and to promote information privacy protection awareness not only to IoT users but also to organizations that use IoT devices or platforms to run their day-to-day business operations. Furthermore, the objective extends to compare user knowledge and concerns about IoT privacy, as well as to identify any common attitudes and variances. However, in terms of enhancing individuals’ knowledge, an artifact was developed to educate and enhance information privacy awareness among IoT users. A pre- and postquestionnaire was generated to test and validate user knowledge regarding information privacy protection in IoT. The study was conducted using a quantitative research method. Findings indicate that IoT users’ awareness of information privacy protection turned out to be average, suggesting a need for education and awareness. Several participants stated that information privacy protection awareness is required within the community to educate, raise awareness, eliminate human error, and enable individuals to be conscious of their privacy when surfing the Internet.

The Internet of Things (IoT) is emerging as a new trend mainly employed in developing numerous vital applications. These applications endure on a federal storage framework primarily concerned with multiple issues. Blockchain technology (BC) is one of the supportive methods for developing IoT-based applications. It is employed to solve the problems encountered in IoT applications. The attack Distributed Denial of Service (DDoS) is one of the leading security attacks in IoT systems. Attackers can effortlessly develop the exposures of IoT gadgets and restrain them as fragments of botnets to commence DDoS threats. The IoT devices are said to be resource-constrained with computing resources and restricted memory. As a developing technology, BC holds the possibility of resolving security problems in IoT. This paper proposes the Metaheuristic-Optimized Blockchain Framework for Attack Detection using a Deep Learning Model (MOBCF-ADDLM) method. The main intention of the MOBCF-ADDLM method is to deliver an effective method for detecting DDoS threats in an IoT environment using advanced techniques. The BC technology is initially applied to mitigate DDoS attacks by presenting decentralized security solutions. Furthermore, data preprocessing utilizes the min-max scaling method to convert input data into a beneficial format. Additionally, feature selection (FS) is performed using the Aquila optimizer (AO) technique to recognize the most relevant features from input data. The attack classification process employs the deep belief network (DBN) technique. Finally, the red panda optimizer (RPO) model modifies the hyper-parameter values of the DBN model optimally and results in higher classification performance. A wide range of experiments with the MOBCF-ADDLM approach is performed under the BoT-IoT Binary and Multiclass datasets. The performance validation of the MOBCF-ADDLM approach portrayed a superior accuracy value of 99.22% over existing models.

Recent advances in Internet of Things (IoT) technologies require a new type of IoT security environment. Various heterogeneous smart devices have easy access to IoT environment, and as the number of users increases, they are exposed to various threats such as malicious attacks on IoT devices and IoT infrastructure, and data tampering by malicious code. Malware detection in IoT requires data and models for continuous and changing learning of smart devices. Methods/Statistical analysis: To minimize these security threats, various malware detection techniques in the field of IoT security have been studied. Malware detection in IoT environment is important for data derivation and learning model required for continuous and changing learning of smart devices. The metadata of malware detection can be normalized by the value of device id, time, behavior, location and state. This paper proposes behavior-based malware detection using deep learning (BMD-DL). Findings: BMD-DL was able to collect metadata about behavior-based malicious behavior and learn and detect malicious codes through deep learning. In addition, through the learned model, IoT Security is provided by disconnecting malicious devices that cause malicious behavior in the IoT environment. Improvements/Applications: BMD-DL collects behavioral data generated from multiple devices in the IoT and applies the results learned through deep learning to detect persistent malware.

The developers and users of Internet of Things (IoT) systems and devices bear a collective obligation to ensure that IoT systems and devices do not make the Internet and other users vulnerable to any potential harm. This chapter proposes a novel network secure framework that can be adapted to the future IoT and finally gives details for the security verification system design. This framework should focus on enhancing the efficacy, dependability, accountability, and regulation in the overall structure that checks the security issues. The chapter discusses the structuring of a security authentication system in the field of IoT. It presents the factors that pose a threat to the IoT security. These include Unprotected Network services, Cloud, mobile and an absence of security configuration. The chapter illustrates the essential components of IoT security and lists the potential challenges in terms of IoT security. It also discusses the concepts representing the risks that increase the probability of intrusions in the IoT devices.

The development and use of Internet of Things (IoT) devices have grown significantly in recent years. Advanced IoT device characteristics are mainly to blame for the wide range of applications that may now be achieved with IoT devices. Corporations have begun to embrace the IoT concept. Identifying true and suitable devices, security faults that might be used for bad reasons, and administration of such devices are only a few of the issues that IoT, a new concept in technological progress, provides. In some ways, IoT device traffic differs from regular device traffic. Devices with particular features can be classified into categories, irrespective of their function or performance. Ever-changing and complex environments, like a smart home, demand this classification scheme. A total of 41 IoT devices were employed in this investigation. To build a multiclass classification model, IoT devices contributed 13 network traffic parameters. To further preprocess the raw data received, preprocessing techniques like Normalization and Dataset Scaling were utilized. Feature engineering techniques can extract features from the text data. A total of 117,423 feature vectors are contained in the dataset after stratification, which are used to further improve the classification model. In this study, a variety of performance indicators were employed to show the performance of the logiboosted algorithms. Logi-XGB scored 80.2% accuracy following application of the logit-boosted algorithms to the dataset for classification, whereas Logi-GBC achieved 77.8% accuracy. Meanwhile, Logi-ABC attained 80.7% accuracy. Logi-CBC, on the other hand, received the highest Accuracy score of 85.6%. The accuracy of Logi-LGBM and Logi-HGBC was the same at 81.37% each. Our suggested Logi-CBC showed the highest accuracy on the dataset when compared to existing Logit-Boosted Algorithms used in earlier studies.

As location-aware IoT (Internet of Things) devices intend to spread across almost every application, IoT devices are going to require different GNSS (Global Navigation Satellite System) receiver design requirements. To deliver on IoT opportunities, system architects and designers need to look carefully at every aspect of system design and architecture to be able to enable the full potential of the IoT era. IoT devices are equipped with different connectivity sensors that can provide a reliable integrated location-awareness solution. IoT devices are mainly relying on GNSS chip to deliver a service when no other RF signal is available. Hence, GNSS chip is expected to maintain a robust and reliable performance even in harsh environment. The harsh environment includes multipath environment, NLOS (Non-Line of Sight) GNSS signal reception, weak GNSS signal power reception, superimposed motion (e.g., arm swing, floating platform fluctuation …etc.), operation under freezing temperature, and interference. The targeted low-cost system design along with the expected harsh operational environment derived us to face exceptional GNSS signal reception condition. This paper discusses lessons learned, and challenges faced signal acquisition, reacquisition, and tracking for several IoT applications. Different operational modes are also explored to accommodate various use cases scenarios for several IoT applications. These different power consumption operational modes allow the GNSS chip to achieve an Ultra-low power consumption which indeed required for IoT applications. This paper provides an overview about the addressed GNSS chip fabricated in a 28nm FD-SOI process. We demonstrate a system performance and power consumption comparison of this chip along with other state-of-the-art GNSS chip. We compare the positioning performance for this device alongside another state-of-the-art GNSS modules and Novatel’s tightly coupled GNSS/INS (Inertial Navigation System) reference solution at numerous scenarios ranging from walking, running, and driving at several sites under different environment.

In this modern era, we are habituated to small smart home appliances that are typically known as the Internet of Things (IoT) devices. While these devices make our daily life easier with the help of internet connectivity, they are becoming an easy target for attackers to penetrate various cyber-attacks. Distributed Denial of Service (DDoS) is one of the pernicious attacks that can be attempted easily on IoT devices. To make our home smart, these devices play a vital role and as a security expert, it is our responsibility to ensure the security of these IoT devices. In this paper, we propose a security scheme to ensure the IoT devices' security. With the capability of the ensemble machine learning technique, we designed and implemented an intrusion detection system in securing IoT devices. To utilize the full capability of our security solution, we verified it with various well-known and benchmark datasets including the IoT dataset. The results show the efficiency of our security solution by producing better F-1 score and lower false alarms compared to any existing approaches.

Internet of Things (IoT) is an emerging technology that consists of tiny sensors embedded with IoT devices used in e-Health, smart cities and assisted living. IoT devices are equipped with constrained power, memory, and computing capabilities, which creates new security challenges. By integrating sensors and wireless technologies, this cutting-edge technology automates numerous routine tasks in different domains. The main goal of advancing IoT in the existing healthcare system is to automate the monitoring of hospitals and patients’ health by spreading goodwill toward the IoT vision. IoT has gained popularity on practically all platforms that are available. This paper presents a remote patient health monitoring and diagnosis system that uses Message Queuing Telemetry Transport protocol (MQTT) and Internet of Things (IoT) devices with one time pad cryptography. The proposed plan offers end-to-end data secrecy for an IoT system using MQTT that enables e-health and mobility. Patients’ movements inside nursing homes and healthcare facilities are also managed safely without the need for periodic reconfigurations. Prior to communicating through the MQTT protocol, this secure crypto scheme encrypts the message on both the publisher and subscriber ends. According to the results, the proposed scheme is more efficient than delegation-based architecture in terms of security and lightweight communication. The proposed system established communication between patients and medical experts using IoT technologies to alleviate the hospital strain caused by congestion in medical treatment and enable an expressway of medical responses. According to our results the proposed scheme has low computational overhead compared to other solutions that use conventional encryption to guarantee robust protection against most of the IoT security attacks.

The Internet of Things (IoT) devices is able to communicate with another IoT devices in heterogeneous environments. They are also able to create a network by their own using wireless capabilities without a centralized approach. This network is called wireless mobile ad hoc network (MANET). The MANET facilitate IoT devices to communicate with each other in an infrastructure less network of the Internet of Things environment. The IoT devices can dynamically join, create connection and exchange information among them. The role of cloud in this framework is to store and process the data by IoT devices. The communication Security has been raised as one of the most critical issues of cloud computing where resolving such an issue would result in a constant growth in the use and popularity of cloud. Our purpose of this study is to create a framework for providing the communication in an integrated framework of Cloud and MANET among IoT devices. Our main contribution links a new study that integrates cloud computing to the MANET and provides communication to the internet of things. This study can be used in the framework of the Internet of Things in future.

With the advancement of 5G mobile telecommunication, various IoT (Internet of Things) devices communicate massive amounts of data by being connected to wireless networks. Since this wireless communication is vulnerable to hackers via data leakage during communication, the transmitted data should be encrypted through block ciphers to protect the data during communication. In addition, in order to encrypt the massive amounts of data securely, it is essential to apply one of secure mode of operation. Among them, CTR (CounTeR) mode is the most widely used in industrial applications. However, these IoT devices have limited resources of computing and memory compared to typical computers, so that it is challenging to process cryptographic algorithms that have computation-intensive tasks in IoT devices at high speed. Thus, it is required that cryptographic algorithms are optimized in IoT devices. In other words, optimizing cryptographic operations on these IoT devices is not only basic but also an essential effort in order to build secure IoT-based service systems. For efficient encryption on IoT devices, even though several ARX (Add-Rotate-XOR)-based ciphers have been proposed, it still necessary to improve the performance of encryption for smooth and secure IoT services. In this article, we propose the first parallel implementations of CTR mode of ARX-based ciphers: LEA (Lightweight Encryption Algorithm), HIGHT (high security and light weight), and revised CHAM on the ARMv8 platform, a popular microcontroller in various IoT applications. For the parallel implementation, we propose an efficient data parallelism technique and register scheduling, which maximizes the usage of vector registers. Through proposed techniques, we process the maximum amount of encryption simultaneously by utilizing all vector registers. Namely, in the case of HIGHT and revised CHAM-64/128 (resp. LEA, revised CHAM-128/128, and CHAM-128/256), we can execute 48 (resp. 24) encryptions simultaneously. In addition, we optimize the process of CTR mode by pre-computing and using the intermediate value of some initial rounds by utilizing the property that the nonce part of CTR mode input is fixed during encryptions. Through the pre-computation table, CTR mode is optimized up until round 4 in LEA, round 5 in HIGHT, and round 7 in revised CHAM. With the proposed parallel processing technique, our software provides 3.09%, 5.26%, and 9.52% of improved performance in LEA, HIGHT, and revised CHAM-64/128, respectively, compared to the existing parallel works in ARM-based MCU. Furthermore, with the proposed CTR mode optimization technique, our software provides the most improved performance with 8.76%, 8.62%, and 15.87% in LEA-CTR, HIGHT-CTR, and revised CHAM-CTR, respectively. This work is the fastest implementation of CTR mode on ARMv8 architecture to the best of our knowledge.

A survey of trust computation models for service management in internet of things systems

Deep learning-enabled anomaly detection for IoT systems

Backscatter communication is an energy-efficient communication technique for the Internet of things (IoT) devices. It enables data transmission by reflecting the incident radio signals. In this paper, we propose a communication mode selection scheme for IoT devices that can communicate using either active transmission or backscattering. In the active transmission mode, the IoT devices can transmit data over narrowband subcarriers using power-domain non-orthogonal multiple access (NOMA). In the backscattering mode, which operates over shorter distance than active transmission, nearby user equipment (UE) devices are used as relays. The UEs receive the backscattered signals from the IoT devices and forward them to the base station. We formulate a connection density maximization problem to select the communication mode used by each IoT device. We determine the IoT device pairing for active transmission mode with NOMA and UE-IoT device association for backscattering mode. The formulated problem is a binary integer programming problem. Although it can be solved optimally, the optimal algorithm incurs exponential computational complexity. Hence, we propose a low-complexity suboptimal algorithm to solve this problem. Results show that our proposed algorithm can enhance the connection density of narrowband IoT systems by up to 64% when compared with using single communication mode.