Design, integration, and optimization procedures to develop air vehicles that meet required mission goals are lengthy and difficult tasks, particularly for high-speed aircraft with challenging mission requirements. The integration process involves synthesizing architectures to incorporate the airframe, propulsion system, and various other necessary subsystems into more optimally functional flight vehicles. Relevant subsystems include thermal and power management, fuel distribution, environmental control, and various other systems, depending on the functional requirements of the aircraft. The selected integration architecture for the various subsystems can result in significant impacts on the performance of the resulting vehicle, and on the ability to achieve the desired mission goals. Evaluation of such impacts at the system level is very desirable in order to optimize the vehicle design with regard to selected performance metrics. A new engineering design tool (e.g., Model Engineer), consisting of a set of modeling and simulation methods, has been developed to facilitate the design and integration of complex engineering systems with high definition analytical models and performance assessments of the resulting integrated system. This paper describes the application of this tool to the design and system level evaluation of thermal management concepts for a future high-speed military aircraft. In a study completed in early 2005 for the Air Force Research Laboratory Propulsion Directorate, a future air weapon system and its mission requirements were defined, and a variety of concepts were considered to provide the necessary thermal management of the vehicle and its propulsion system. Various thermal system architectural configurations were conceptualized in conjunction with the airframe, engine and subsystem supplier team members, and the modeling design tool subsequently used to build and evaluate simulations of the various integrated concepts. The paper will describe some of the configurations along with the methods employed to construct an operational simulation of these conceptual systems. Additional discussion will further describe the approach used to provide mission level evaluation of each simulation, show typical results of the evaluations, and the significance of such results. Finally, a description will be provided of future planned application of the design methods, and expansion of the methods to broaden the area of application.