Application of Bounded Variable Simplex Algorithm in Solving Maximal Flow Model

Augmenting path algorithms, first introduced by Ford and Fulkerson (Ford, L. R., D. R. Fulkerson. 1962. Flows in Networks. Princeton University Press, Princeton, N.J.), are widely used in optimization. Examples include Schönsleben's polymatroid intersection algorithm (Schönsleben, P. 1980. Ganzzahlige polymatroid-intersection-algorithmen. Ph.D. thesis, Eidgenössischen Technischen Hochschule, Zürich.), the maximum polymatroidal network flow algorithm of Lawler and Martel (Lawler, E. L., C. U. Martel. 1982. Computing maximal polymatroidal network flows. Math. Oper. Res. 7 334–347.), Frank's algorithm for the Edmonds–Giles polyhedron (Frank, A. 1984. Finding feasible vectors of Edmonds-Giles polyhedra. J. Combin. Theory Ser. B 36 221-239.) and Cunningham's algorithm for testing membership in matroid polyhedra (Cunningham, H. W. 1984. Testing membership in matroid polyhedra. J. Combin. Theory Ser. B 36 161–188.). Here we give an order of magnitude improvement for the above algorithms by using an approach analogous to that of Dinits’ maximum flow algorithm (Dinits, E. A. 1970. Algorithm for solution of a problem of maximum flow in a network with power estimation. Soviet Math. Dokl. 11 1277–1280.).

With an increasing number of processing elements (PEs) integrated on a single chip, fault-tolerant techniques are critical to ensure the reliability of such complex systems. In current reconfigurable architectures, redundant PEs are utilized for fault tolerance. In the presence of faulty PEs, the physical topologies of various chips may be different, so the concept of virtual topology from network embedding problem has been used to alleviate the burden for the operating systems. With limited hardware resources, how to reconfigure a system into the most effective virtual topology such that the maximum repair rate can be reached presents a significant challenge. In this article, a new approach using a maximum flow (MF) algorithm is proposed for an efficient topology reconfiguration in reconfigurable architectures. In this approach, topology reconfiguration is converted into a network flow problem by constructing a directed graph; the solution is then found by using the MF algorithm. This approach optimizes the use of spare PEs with minimal impacts on area, throughput, and delay, and thus it significantly improves the repair rate of faulty PEs. In addition, it achieves a polynomial reconfiguration time. Experimental results show that compared to previous methods, the MF approach increases the probability to repair faulty PEs by up to 50% using the same redundant resources. Compared to a fault-free system, the throughput only decreases by less than 2.5% and latency increases by less than 4%. To consider various types of PEs in a practical application, a cost factor is introduced into the MF algorithm. An enhanced approach using a minimum-cost MF algorithm is further shown to be efficient in the fault-tolerant reconfiguration of heterogeneous reconfigurable architectures.

A new maximal flow algorithm for solving optimization problems with linguistic capacities and flows

The bulk power system is one of the largest man-made networks and its size makes control an extremely difficult task. This paper presents a method to control a power network using UPFCs set to levels determined by a maximum flow (max-flow) algorithm. The graph-theory-based max-flow is applied to the power system for UPFC placement and scheduling. A distributed version of max-flow is described to coordinate the actions of the UPFCs distributed in a power network. Two sample power systems were tested using max-flow for UPFC placement and settings. The resulting system characteristics are examined over all single-line contingencies and the appropriateness of the maximum flow algorithm for power flow control is discussed.

We study the class of preflow push algorithms recently introduced by Goldberg and Tarjan for solving the maximum network flow problem on a weighted digraph G(V,E). We improve Goldberg and Tarjanis O(n3) time bound for the maximum distance preflow push algorithm to O(n2√m) and show that this bound is tight by constructing a parametrized worst case network. We then develop the maximal excess preflow push algorithm and show that it achieves a bound of O(n2√m) pushes. Based on this we develop a maximum network flow algorithm for the synchronous distributed model of computation that uses at most O(n2√m) messages and O(n2) time, thereby improving upon the best previously known algorithms for this model.

We present an algorithm that computes exact maximum flows and minimum-cost flows on directed graphs with m edges and polynomially bounded integral demands, costs, and capacities in m 1+ o (1) time. Our algorithm builds the flow through a sequence of m 1+ o (1) approximate undirected minimum-ratio cycles, each of which is computed and processed in amortized m o (1) time using a new dynamic graph data structure. Our framework extends to algorithms running in m 1+ o (1) time for computing flows that minimize general edge-separable convex functions to high accuracy. This gives almost-linear time algorithms for several problems including entropy-regularized optimal transport, matrix scaling, p -norm flows, and p -norm isotonic regression on arbitrary directed acyclic graphs.

We study the class of preflow push algorithms recently introduced by Goldberg and Tarjan for solving the maximum network flow problem on a weighted digraph G(V,E). We improve Goldberg and Tarjanis O(n3) time bound for the maximum distance preflow push algorithm to O(n2√m) and show that this bound is tight by constructing a parametrized worst case network. We then develop the maximal excess preflow push algorithm and show that it achieves a bound of O(n2√m) pushes. Based on this we develop a maximum network flow algorithm for the synchronous distributed model of computation that uses at most O(n2√m) messages and O(n2) time, thereby improving upon the best previously known algorithms for this model.

In this paper, we focus on the dynamic traffic assignment (DTA) problem on large-scale expressway networks especially under the condition of traffic events (such as severe weather, large traffic accidents etc.). We formulate the expressway network DTA problem as a nonconvex optimization problem. Considering the difficulty of solving the problem, we put forward an approximate solution algorithm based on the network flow theory with high computational efficiency and strong applicability. Specifically, a machine learning approach and a series of customization strategies of network flow model (including multi-origin and multidestination split, flow discretization and parallel edges addition methods) are proposed to transform the DTA problem into a resoluble network flow problem. After that, in order to improve the operational efficiency of an expressway network after traffic events occurring, the proposed network flow based two-layer DTA model (NTDM) is separated into two parts-traffic flow limitation model based on maximum flow algorithm and traffic assignment model based on minimum cost flow algorithm. Experiments on real expressway network data in some provinces of China show that our method can make a significant 26.03% reduction in saturation rate in a particular scenario. In efficiency test, the NTDM is at least 600 times faster than the traditional analytic method in a network with thousands of nodes.

<p>In this paper, we solve this problem of finding maximum flow in extended mixed network by Revised preflow-push methods of Goldberg This algorithm completely different algorithm postflow-pull in [15]. However, we share some common theory with [15].</p>

A new Karzanov-type O( n3) max-flow algorithm

A fast algorithm for maximum integral two-commodity flow in planar graphs

Predictive business process monitoring aims at providing the predictions about running instances by analyzing logs of completed cases of a business process. Recently, a lot of research focuses on increasing productivity and efficiency in a business process by forecasting potential problems during its executions. However, most of the studies lack suggesting concrete actions to improve the process. They leave it up to the subjective judgment of a user. In this paper, we propose a novel method to connect the results from predictive business process monitoring to actual business process improvements. More in detail, we optimize the resource allocation in a non-clairvoyant online environment, where we have limited information required for scheduling, by exploiting the predictions. The proposed method integrates offline prediction model construction that predicts the processing time and the next activity of an ongoing instance using LSTM with online resource allocation that is extended from the minimum cost and maximum flow algorithm. To validate the proposed method, we performed experiments using an artificial event log and a real-life event log from a global financial organization.

Network models are often applied in project management. In Time — Cost Trade-Off time and cost parameters are assigned to the activities. At first it has to decide what kind of technology and resources will be applied, which determine the parameters. Typically there is not only one proper technology for realize the engineering object. In this paper a known time-cost trade-off based on maximal flow algorithm is generalized by integrating the possibility of applying multi-parameters. This algorithm chooses automatically the optimal technology for all the activities in the model.

Maximal flows reach at least a 1/2 approximation of the maximum flow in client-server networks. By adding only 1 additional time round to any distributed maximal flow algorithm we show how this 1/2-approximation can be improved on bounded-degree networks. We call these modified maximal flows ‘locally fair’ since there is a measure of fairness prescribed to each client and server in the network. Let N = (U,V,E,b) represent a client-server network with clients U, servers V, network links E, and node capacities b, where we assume that each capacity is at least one unit. Let d(u) denote the b-weighted degree of any node u ∈ U ∪ V, Δ = max {d(u) | u ∈ U } and δ = min { d(v) | v ∈ V }. We show that a locally-fair maximal flow f achieves an approximation to the maximum flow of \(\min \{ 1, \frac{\Delta^2 - \delta} {2\Delta^2 - \delta\Delta - \Delta}\) }, and this result is sharp for any given integers δ and Δ. This results are of practical importance since local-fairness loosely models the steady-state behavior of TCP/IP and these types of degree-bounds often occur naturally (or are easy to enforce) in real client-server systems.KeywordsDistributed Flow AlgorithmsOblivious RoutingNetwork AlgorithmsMaximal Flow

Chapter 5 - Efficient CUDA Algorithms for the Maximum Network Flow Problem