Applying Dataflow Analysis to Detecting Software Vulnerability

Smart contracts on blockchain platforms are susceptible to security issues that can lead to significant financial losses. This study converts the Solidity code into abstract syntax trees and generates control flow graphs and data flow graphs. These graphs train a graph convolutional network model to detect security weaknesses. The proposed system outperforms traditional tools, achieving higher accuracy, recall, precision, and F1 scores when detecting weaknesses such as integer overflow/underflow, reentrancy, delegate call to the untrusted callee, and time-based issues. This study demonstrates that leveraging control and data flow analysis with graph neural networks significantly enhances smart contract security and provides a robust and reliable solution.

Code optimization improves program performance through program analysis and program transformation, which transforms the program in an equivalent form. The basis of optimization is data flow analysis and control flow analysis. The paper first analyzes the characterization of Mgrid and the kernel Resid routine, including architecture analysis, data flow analysis, and dependence analysis, which is the basis of static optimization. Based on these characterization data, we first apply static optimization to Resid, including DMA access, data reuse, overlapping of computing and DMA, loop unrolling, common sub-expression extraction, Input Value Embedding, etc. and then loop blocking is applied to Resid, and genetic algorithm is utilized to search for the near-optimal blocking size, which further improves the performance of static optimization. The performance of Mgrid is improved by combing static analysis and empirical search, which is verified during the experiments.

: This final report describes results of the Phase I SBIR research effort to develop new software testing techniques capable of satisfying the demands of distributed real-time software environments. Traditional software testing techniques are inadequate for distribute systems due to such complicating factors as non-deterministic execution, real-time timing constraints, task interaction event sequencing, race conditions, etc. During the course of the Phase I-effort, OTI investigate a wide variety of candidate technique. For each technique, OTI evaluated the feasibility and defined a research and development approach for the technique and required supporting technologies. Detailed comparison-of the attributes of each technique gives the following prioritization of techniques: Deterministic Execution Testing, Timing Analysis, Control Flow Testing, Dependency Analysis, Network Communication Testing, Data Flow Analysis, Problem Tracking Facility, Mutation Analysis, Static Concurrency Testing. OTI's research approach was based on developing new functionality on top of an existing software testing environment to construct the Environment for Test and Analysis of Distributed Software (ETADS). Distributed software testing, Software testing environment, Control flow analysis, Data flow analysis, Timing analysis, Software instrumentation, Non- determinism, Deterministic replay.

This paper explores the problem of identifying malicious code sections in applications for the Android. A method for analyzing Android applications is proposed, based on applying of static analysis using control flow graphs and data flow graphs. The paper formally describes the dependency relationships that are used to construct graphs, and also describes an algorithm that allows to identify malicious sections of code using the received graphs. The results of an experimental evaluation of the effectiveness of the proposed method are presented, demonstrated a high probability of detecting malicious portions of the code of Android applications.

Static and dynamic program analysis techniques are important research areas in software security. Static analysis helps us locate vulnerabilities in a software by looking at the source code. Dynamic analysis helps us reason about the behavior of the software from information gathered at run-time. In this thesis, we are focusing on data flow analysis and heap analysis which are key static and dynamic program analysis techniques respectively.
\n
\nIn the first part of this thesis, we aim at detecting vulnerabilities in Android applications which have capability leaks. The security of the Android platform relies mainly on sandboxing applications and restricting their capabilities such that no application, by default, can perform any operations that would adversely impact other applications, the operating system, or the user. However, a recent research reported that a genuine but vulnerable application may leak its capabilities. When being leveraged, other applications can gain extra capabilities which they are not granted originally. We present DroidChecker, an Android application analyzing tool which searches for the aforementioned vulnerability in Android applications. DroidChecker uses interprocedural control flow graph searching and static taint checking to detect exploitable data paths in an Android application. We analyzed more than 1100 Android applications using DroidChecker and found 6 previously unknown vulnerable applications including the renowned Adobe Photoshop Express application. We also developed a malicious application that exploits the previously unknown vulnerability found in the Adobe Photoshop Express application. We showed that the malicious application, which is not granted any permissions, can access contacts on the phone with just a few lines of code.
\n
\nIn the second part of this thesis, we explore the use of heap analysis to extract software birthmarks. There are techniques like code obfuscation and watermarking which can make the source code of a program difficult to understand by humans and prove the ownership of the program. However, code obfuscation cannot avoid the source code being copied and a watermark can be defaced. A birthmark is a group of unique characteristics a program possesses that can be used to identify the program. We propose two novel dynamic birthmark systems based on the run-time heap. A dynamic birthmark is one that is extracted when the program is executing. Since it is based on the run-time behavior of the program, semantics-preserving transformations of the code like obfuscation cannot defeat dynamic birthmarks. In this regard, dynamic birthmarks are more robust compared with static birthmarks.
\n
\nTo the best of our knowledge, these are the first birthmark systems using heap analysis as the underlying technique. The basic idea is to take snapshots of the heap while the program is running. From the snapshots, heap graphs are constructed to model the referencing structure between objects. After going through some filtering and referencing processes, they become the birthmarks. The two birthmark systems have been devised to extract birthmarks for Java programs and JavaScript programs respectively. While the underlying ideas of the two birthmark systems are similar, the differences in nature of the two programming languages led to different implementation designs.

The ways that the methods of data flow analysis can be applied to improve software reliability are described. There is also a review of the basic terminology from graph theory and from data flow analysis in global program optimization. The notation of regular expressions is used to describe actions on data for sets of paths. These expressions provide the basis of a classification scheme for data flow which represents patterns of data flow along paths within subprograms and along paths which cross subprogram boundaries. Fast algorithms, originally introduced for global optimization, are described and it is shown how they can be used to implement the classification scheme. It is then shown how these same algorithms can also be used to detect the presence of data flow anomalies which are symptomatic of programming errors. Finally, some characteristics of and experience with DAVE, a data flow analysis system embodying some of these ideas, are described.

EDSA (expert data flow and static analysis tool) which uses static analysis of source code to help gain an understanding of existing code, is described. This may be for the purpose of tracking down a bug or to determine in advance whether an intended change will have any undesirable side effects. In either case, the phase of the development life cycle that is most likely to benefit from a tool like EDSA is the maintenance phase. EDSA provides three kinds of facilities. It helps to browse through code, following either the control flow or data flow, rather than the order in which the code happens to be written. It displays code with unimportant source lines eluded, so that the user can get a more global view of the program. Finally, it provides search management to make it easier to examine all possibilities when browsing. The mechanism used to create and display various views of programs is described and the approach to the user interface is discussed. The state of the current implementation is described. >

The specification language is a critical component of the hardware-software co-design process since it is used for functional validation and as a starting point for hardware-software partitioning and co-synthesis. The paper proposes the Java programming language as a specification language for hardware-software systems. Java has several characteristics that make it suitable for system specification. However static control and data flow analysis of Java programs is problematic because Java classes are dynamically linked. The paper provides a general solution to the problem of statically analyzing Java programs using a technique that pre-allocates most class instances and aggressively resolves memory aliasing using global analysis. The output of the analysis is a control data flow graph for the input specification. The results for sample designs show that the analysis can extract fine to coarse-grained concurrency for subsequent hardware-software partitioning and co-synthesis steps of the hardware-software co-design process to exploit.

Flow logic offers a compact and versatile notation for expressing the acceptability of solutions to program analysis problems. In contrast to previous logical formulations of program analysis it aims at integrating existing approaches to data flow analysis and control flow analysis. It is able to deal with a broad variety of language paradigms, program properties, kinds of formal semantics, and methods used for computing the best solution. In this paper we illustrate how a compositional flow logic (in “succinct” form) can be systematically transformed into an efficient exhaustive procedure for computing the best solution of a set of constraints generated. This involves transformations to attribute grammars and to specifications of the (“verbose”) form used in control flow analysis.

Data flow analysis is used widely in program compilation, understanding, design, and analysis tools. In data flow analysis, problem-specific information is associated with nodes and/or edges in the flow graph representation of a program or component and re-comp\-uted iteratively. A popular data flow analysis design relies on a worklist that stores all nodes and edges whose data flow information has to be re-computed. While this approach is straightforward, it has some drawbacks. First, the presence of the worklist makes data flow algorithms centralized, which may reduce effectiveness of parallel implementations of these algorithms. Second, the worklist approach is difficult to implement in a way that minimizes the amount of information passed between flow graph nodes.In this paper, we propose to use the well-known Observer pattern for implementation of data flow analyses. We argue that such implementations are more object-oriented in nature, as well as less centralized, than worklist-based ones. We argue that by adopting this Observer-based view, data flow analyses that minimize the amount of information passed between flow graph nodes can be implemented easier than by using the worklist view. We present experimental data indicating that for some types of data flow problems, even single-threaded implementations of Observer-based data flow analysis have better run times than comparable worklist-based implementations.

Analysis and mapping of national data flows and processes relevant to EFSA's business data collections is a long‐standing EFSA objective, originally launched with EFSA's SIGMA project in 2018‐2019 and further continued with the launch of a focused activity to “Develop, pilot and document a methodology for the data flow mapping and analysis in the European Member States” in 2023. The aim of latter activity is to apply a generic methodology for the analysis of any business data collection at Member State level with the ultimate purpose for countries and EFSA to increase understanding of data flows at national level, where existing challenges rely on and what common solutions could be implemented. This report presents results from the execution of the aforementioned methodology on Norway for the analysis of national data flows which contribute data to Food Consumption business data collection. The report contains information on the steps, participant organizations and actors, tools, systems, formats, structural and content metadata, as well as challenges and “pain points” identified in the country's internal data flows related to the collection of the selected data. The presented information has been generated based on the responses submitted by the participating Member State to a survey developed in the context of the data flow mapping and analysis methodology as well as relevant discussions held in a post‐survey interview with the country. Though the information presented on the current report represents real‐world data, it must be clarified that the survey and the follow‐up interview with the MS, have been both performed during the activity of the Data Flow Mapping methodology.

It is known that not all paths are possible in the run time control flow of many programs. It is also known that data flow analysis cannot restrict attention to exactly those paths that are possible. It is therefore usual for analytic methods to consider all paths. Sharper information can be obtained by considering a recursive set of paths that is large enough to include all possible paths but small enough to exclude many of the impossible ones. This paper presents a simple uniform methodology for sharpening data flow information by considering certain recursive path sets of practical importance. Associated with each control flow arc there is a relation on a finite set Q. The paths that qualify to be considered are (essentially) those for which the composition of the relations encountered is nonempty. For example, Q might be the set of all assignments of values to each of several bit variables used by a program to remember some facts about the past and branch accordingly in the future. Given any data flow problem together with qualifying relations on Q associated with the control flow arcs, we construct a new problem. Considering all paths in the new problem is equivalent to considering only qualifying paths in the old one. Preliminary experiments (with a small set of real programs) indicate that qualified analysis is feasible and substantially more informative than ordinary analysis. The methodology also has a beneficial feedback effect on the delicate task of passing from programs to meaningful data flow analysis problems. Even when all paths qualify, unusually sharp information can be obtained by passing from programs to problems in ways suggested by our theorems.

Data Flow Analysis as expressed by Monotone Frameworks is often associated with classical imperative programming languages and has played a crucial role in the efficient implementation of these languages. Robin Milner's Calculus of Communicating Systems, CCS, is concerned with modelling concurrent systems and has mainly been analysed using types and control flow analyses. In the present paper we present an instance of a Monotone Framework together with a novel worklist algorithm for more precisely approximating the flow-sensitive control structure of even infinitary processes expressed in CCS.

A number of coverage criteria have been proposed for testing classes and class clusters modeled with state machines. Previous research has revealed their limitations in terms of their capability to detect faults. As these criteria can be considered to execute the control flow structure of the state machine, we are investigating how data flow information can be used to improve them in the context of UML state machines. More specifically, we investigate how such data flow analysis can be used to further refine the selection of a cost‐effective test suite among alternative, adequate test suites for a given state machine criterion. This paper presents a comprehensive methodology to perform data flow analysis of UML state machines—with a specific focus on identifying the data flow from OCL guard conditions and operation contracts—and applies it to a widely referenced coverage criterion, the round‐trip path (transition tree) criterion. It reports on two case studies whose results show that data flow information can be used to select the best transition tree, in terms of cost effectiveness, when more than one satisfies the transition tree criterion. The results also suggest that different trees are complementary in terms of the data flow that they exercise, thus, leading to the detection of intersecting but distinct subsets of faults. Copyright © 2009 John Wiley & Sons, Ltd.

It is known that not aU paths are possible in the run time control flow of many programs. It is also known that data flow analysis cannot restrict attention to exactly those paths that are possible. It is, therefore, usual for analytic methods to consider aU paths. Sharper information can be obtained by considering a recursive set of paths that is large enough to include aUl possible paths, but smaU enough to exclude many of the impossible ones. This paper presents a simple uniform methodology for sharpening data flow information by considering certain recursive path sets of practical importance. Associated with each control flow arc there is a relation on a finite set Q. The paths that qualify to be considered are (essentially) those for which the composition of the relations encountered is nonempty. For example, Q might be the set of all assignments of values to each of several bit variables used by a program to remember some facts about the past and branch accordingly in the future. Given any data-flow problem together with qualifying relations on Q associated with the control flow arcs, we construct a new problem. Considering all paths in the new problem is equivalent to considering only qualifying paths in the old one. Preliminary experiments (with a smaUl set of real programs) indicate that qualified analysis is feasible and substantialy more informative than ordinary analysis.