Applying various hybrid intelligent systems to evaluate and predict slope stability under static and dynamic conditions

In this paper, we proposed two hybrid data clustering algorithms that are called ICAFKM and PSOFKM. ICAFKM combined the advantageous aspects of Fuzzy K-Means (FKM) and Imperialist Competitive Algorithm (ICA), and PSOFKM makes full use of the merits of both Particle Swarm Optimization (PSO) and FKM algorithms. FKM is one of the most popular data clustering methods. However, this algorithm solves the problem of sensitivity to initial states of K-Means (KM) algorithm, but like KM, it often converges to local optima. The proposed ICAFKM and PSOFKM algorithms aim to help the FKM to escape from local optima and increase the convergence speed of the ICA and PSO algorithms in clustering process. In order to evaluate the performance of ICAFKM and PSOFKM methods, we evaluate these algorithms on five datasets and compared them with FKM, ICA, PSO, PSOKHM, and HABC algorithms. The experimental results indicate that the ICAFKM carries out better results than the other methods.

In the present work, we employed artificial neural network (ANN) that is optimized with two hybrid models, namely imperialist competition algorithm (ICA) as well as particle swarm optimization (PSO) in the case of the problem of bearing capacity of shallow circular footing systems. Many types of research have shown that ANNs are valuable techniques for estimating the bearing capacity of the soils. However, most ANN training models have some drawbacks. This study aimed to focus on the application of two well-known hybrid ICA–ANN and PSO–ANN models to the estimation of bearing capacity of the circular footing lied in layered soils. In order to provide the training and testing datasets for the predictive network models, extensive finite element (FE) modelling (a database includes 2810 training datasets and 703 testing datasets) are performed on 16 soil layer sets (weaker soil rested on stronger soil and vice versa). Note that all the independent variables of ICA and PSO algorithms are optimized utilizing a trial and error method. The input includes upper layer thickness/foundation width (h/B) ratio, footing width (B), top and bottom soil layer properties (e.g., six of the most critical soil characteristics), vertical settlement of circular footing (s), where the output was taken ultimate bearing capacity of the circular footing (Fult). Based on coefficient of determination (R2) and Root Mean Square Error (RMSE), amounts of (0.979, 0.076) and (0.984, 0.066) predicted for training dataset and amounts of (0.978, 0.075) and (0.983, 0.066) indicated in the case of the testing dataset of proposed PSO–ANN and ICA–ANN models of prediction network, respectively. It demonstrates a higher reliability of the presented PSO–ANN model for predicting ultimate bearing capacity of circular footing located on double sandy layer soils.

Application of hybrid intelligent systems in predicting the unconfined compressive strength of clay material mixed with recycled additive

The maximum power point tracking (MPPT) system ensures that the solar cell operates at its maximum power point, which is the point at which it produces the most power for a given set of conditions. This study uses an artificial bee colony (ABC) algorithm and particle swarm optimization (PSO) algorithms to optimize the boost converter. The ABC and PSO algorithms help to optimize the boost converter by finding the best possible duty cycle and other parameters that maximize efficiency. The resulting duty cycle of 20% produced the highest efficiency of 78.26% obtained from the boost converter. A system-wide test was conducted between 9:00 and 11:10 WIB. In MPPT systems using boost converters with the PSO algorithm, the average power is 16.80 W, while in MPPT systems using boost converters with the ABC algorithm, the average power is 14.53 W. The novelty of the study discusses a system designed to optimize power by using a boost converter in order to increase power output from solar panels. The algorithms PSO and ABC are used to analyze the data from the PV and adjust the converter parameters to optimize the output in order to increase the efficiency of the system.

As blasting has some environmental constraints, ripping has got more prevalent as a method of breaking ground in both civil and mining engineering applications. A rippability model of a higher applicability is, therefore, needed to appropriately predict the ripping production (Q) prior to carrying out such tests. For the purpose of predicting the results of ripping production that were attained in three sites located in Johor state, Malaysia, the present study applied three hybrid intelligent techniques, i.e., neuro-bee, neuro-imperialism, and neuro-swarm, to predict Q. In fact, the effects of artificial bee colony (ABC), imperialism competitive algorithm (ICA), and particle swarm optimization (PSO) on weights and biases of neural networks were examined in the current research to receive better prediction/evaluation of ripping production. To do this, totally, 74 ripping tests were taken into consideration in the investigated regions and their influential parameters were assessed. Many parametric studies on ABC, ICA, and PSO parameters were conducted, and then, a comparison was done on the obtained results of the predictive hybrid models using several performance indices. As confirmed by the comparative results, the neuro-bee model proposed in this study estimated Q with a higher accuracy than the other hybrid models. The root-mean-square error (RMSE) values of 0.060, 0.076, and 0.094 were obtained for testing the data sets of neuro-bee, neuro-imperialism, and neuro-swarm techniques, respectively. This clearly shows that the newly developed hybrid model was superior to its rival in terms of predicting the ripping production. Furthermore, results of sensitivity analysis showed that weathering zone is the most influential factor on ripping production as compared to other inputs.

PurposeConstruction projects managers try their best for the project to go according to the plans. They always attempt to complete the projects on time and consistent with the predetermined budgets. Amid so many problems in project planning, the most critical and well-known problem is the Resource-Constrained Project Scheduling Problem (RCPSP). The purpose of this paper is to solve RCPSP using hybrid algorithm ICA/PSO.Design/methodology/approachDue to the existence of various forms for scheduling the problem and also the diversity of constraints and objective functions, myriad of research studies have been conducted in this realm of study. Since most of these problems are NP-hard ones, heuristic and meta-heuristic methods are used for solving these problems. In this research, a novel hybrid method which is composed of meta-heuristic methods of particle swarm optimization (PSO) and imperialist competitive algorithm (ICA) has been used to solve RCPSP. Finally, a railway project has been examined for RCPS Problem in a real-world situation.FindingsAccording to the results of the case study, ICA/PSO algorithm has better results than ICAs and PSO individually.Practical implicationsICA/PSO algorithm could be used for solving problems in a multi-mode situation of activities or considering more constraints on the resources, such as the existence of non-renewable resources and renewable. Based on the case study in construction project, ICA/PSO algorithm has a better solution than PSO and ICA.Originality/valueIn this study, by combining PSO and ICA algorithms and creating a new hybrid algorithm, better solutions have been achieved in RCPSP. In order to validate the method, standard problems available in PSPLib library were used.

Estimation of transformer parameters from nameplate data by imperialist competitive and gravitational search algorithms

In this work, we tried to automatically optimize the cost of the concrete segmental lining used as a support system in the case study of Mashhad Urban Railway Line 2 located in NE Iran. Two meta-heuristic optimization methods including particle swarm optimization (PSO) and imperialist competitive algorithm (ICA) were presented. The penalty function was used for unfeasible solutions, and the segmental lining structure was defined by nine design variables: the geometrical parameters of the lining cross-section, the reinforced feature parameters, and the dowel feature parameters used among the joints to connect the segment pieces. Furthermore, the design constrains were implemented in accordance with the American Concrete Institute code (ACI318M-08) and guidelines of lining design proposed by the International Tunnel Association (ITA). The objective function consisted of the total cost of structure preparation and implementation. Consequently, the optimum design of the system was analyzed using the PSO and ICA algorithms. The results obtained showed that the objective function of the support system by the PSO and ICA algorithms reduced 12.6% and 14% per meter, respectively.

Intelligent MPPT for photovoltaic panels using a novel fuzzy logic and artificial neural networks based on evolutionary algorithms

Mixed-mode integrated circuits become increasingly popular in modern VLSI Chip design. However, designing these circuits in CMOS technology is no small feat given the need to balance a range of conflicting performance criteria and design constraints. In this work, optimized two-stage operational amplifier designed using meta heuristics ABC (Artificial Bee Colony) and PSO (Particle Swarm Optimization) algorithms. By leveraging ABC and PSO algorithms, the design process can efficiently achieve the desired performance goals by optimally sizing of the circuit components. In the proposed automated optimization environment, implementation of the ABC and PSO algorithms are implemented in Python language and integrated with the Ngspice simulation tool using BSIM4 MOSFET models in TSMC’s 130nm technology node. The entire optimization environment is set up on the Ubuntu operating system, and the results achieved with the ABC and PSO are compared with earlier reported work in which proposed optimized operational amplifier achieved higher unity gain bandwidth and higher CMRR. Proposed automated design environment interface between Ngspice circuit simulator and evolutionary algorithm to obtain the optimum results for the mentioned multidimensional design problem.

Over the last decade, application of soft computing techniques has rapidly grown up in different scientific fields, especially in rock mechanics. One of these cases relates to indirect assessment of uniaxial compressive strength (UCS) of rock samples with different artificial intelligent-based methods. In fact, the main advantage of such systems is to readily remove some difficulties arising in direct assessment of UCS, such as time-consuming and costly UCS test procedure. This study puts an effort to propose four accurate and practical predictive models of UCS using artificial neural network (ANN), hybrid ANN with imperialism competitive algorithm (ICA–ANN), hybrid ANN with artificial bee colony (ABC–ANN) and genetic programming (GP) approaches. To reach the aim of the current study, an experimental database containing a total of 71 data sets was set up by performing a number of laboratory tests on the rock samples collected from a tunnel site in Malaysia. To construct the desired predictive models of UCS based on training and test patterns, a combination of several rock characteristics with the most influence on UCS has been used as input parameters, i.e. porosity (n), Schmidt hammer rebound number (R), p-wave velocity (Vp) and point load strength index (Is(50)). To evaluate and compare the prediction precision of the developed models, a series of statistical indices, such as root mean squared error (RMSE), determination coefficient (R2) and variance account for (VAF) are utilized. Based on the simulation results and the measured indices, it was observed that the proposed GP model with the training and test RMSE values 0.0726 and 0.0691, respectively, gives better performance as compared to the other proposed models with values of (0.0740 and 0.0885), (0.0785 and 0.0742), and (0.0746 and 0.0771) for ANN, ICA–ANN and ABC–ANN, respectively. Moreover, a parametric analysis is accomplished on the proposed GP model to further verify its generalization capability. Hence, this GP-based model can be considered as a new applicable equation to accurately estimate the uniaxial compressive strength of granite block samples.

Recently, pumped storage hydropower is used in the agricultural industry and isolated rural micro-grid. On the other side, a diesel generator usually does not operate in optimum point in isolated power supply. Therefore, it can be used in joint with other energy sources such as photovoltaic and energy storage system which develop an ideal option for autonomous power generation in islanded mode. Hence, this paper intends to present an optimal operation and energy management method for a hybrid micro-grid with study on day-ahead scheduling. In this paper, optimal operation of hybrid micro-grid including of photovoltaic, pump as turbine system, and diesel generator are considered. The optimal energy management minimize the fuel cost of diesel generator, annual operating cost as well as the balance between generation and load in different seasons. Aiming to this purpose, three famous optimization algorithms, namely artificial bee colony (ABC), particle swarm optimization (PSO) and imperialist competitive algorithm (ICA), are used to determine the optimal diesel generator generation, pumped storage operating mode, pumping and turbine real power in order to minimize the total operating cost for a day-ahead.

In this study, vibration sensors were used to measure blast-induced ground vibration (PPV). Different evolutionary algorithms were assessed for predicting PPV, including the particle swarm optimization (PSO) algorithm, genetic algorithm (GA), imperialist competitive algorithm (ICA), and artificial bee colony (ABC). These evolutionary algorithms were used to optimize the support vector regression (SVR) model. They were abbreviated as the PSO-SVR, GA-SVR, ICA-SVR, and ABC-SVR models. For each evolutionary algorithm, three forms of kernel function, linear (L), radial basis function (RBF), and polynomial (P), were investigated and developed. In total, 12 new hybrid models were developed for predicting PPV in this study, named ABC-SVR-P, ABC-SVR-L, ABC-SVR-RBF, PSO-SVR-P, PSO-SVR-L, PSO-SVR-RBF, ICA-SVR-P, ICA-SVR-L, ICA-SVR-RBF, GA-SVR-P, GA-SVR-L and GA-SVR-RBF. There were 125 blasting results gathered and analyzed at a limestone quarry in Vietnam. Statistical criteria like R2, RMSE, and MAE were used to compare and evaluate the developed models. Ranking and color intensity methods were also applied to enable a more complete evaluation. The results revealed that GA was the most dominant evolutionary algorithm for the current problem when combined with the SVR model. The RBF was confirmed as the best kernel function for the GA-SVR model. The GA-SVR-RBF model was proposed as the best technique for PPV estimation.

This study addresses the modeling of high-order FIR (Finite Impulse Response) systems using lower-order FIR filters, which is a significant challenge in digital filter design and system identification. The primary objective is to approximate the amplitude frequency response of a fifth-order FIR system with a fourth-order FIR model while minimizing the modeling error. To achieve this, four metaheuristic optimization algorithms—Particle Swarm Optimization (PSO), Artificial Bee Colony (ABC), Quick ABC (qABC), and Memetic Algorithm (MA)—are employed. Each algorithm is executed in 30 independent trials to assess its robustness and performance.The modeling task is formulated as an optimization problem where the mean squared error (MSE) between the reference system’s frequency response and the approximated model’s response is minimized. The performance of each algorithm is evaluated not only by their convergence behavior over iterations but also by detailed frequency-domain analyses, including both amplitude response and power spectrum comparisons. Furthermore, the statistical properties of each algorithm’s output—such as mean, standard deviation, minimum and maximum MSE values—are used to evaluate consistency and accuracy.The results show that the ABC algorithm achieves the best overall balance, providing the lowest average MSE and smallest variance, indicating strong stability and accuracy. The MA algorithm, while achieving the lowest minimum MSE in some runs, exhibits higher variability, suggesting less consistency. The qABC algorithm demonstrates fast convergence and high potential for accurate modeling, but its relatively high standard deviation points to a lack of solution stability. The PSO algorithm, although able to reach low error values in some runs, generally produces more dispersed and inconsistent solutions due to its broader error range.In conclusion, this work presents a comprehensive comparative evaluation of metaheuristic algorithms for low-order FIR filter modeling. The findings highlight the superiority of ABC and MA algorithms in terms of accuracy and stability, and point toward the potential of hybrid or adaptive versions of these algorithms for future filter design and system identification problems.Keywords: FIR filter, system modeling, PSO, ABC, Quick ABC, MA.

In this note we present our most recent advances in the automatic design of artificial neural networks (ANNs) and associative memories (AMs) for pattern classification and pattern recall. Particle Swarm Optimization (PSO), Differential Evolution (DE), and Artificial Bee Colony (ABC) algorithms are used for ANNs; Genetic Programming is adopted for AMs. The derived ANNs and AMs are tested with several examples of well-known databases. As we will show, results are very promising.