Artificial Neural Network Based Classification Of Motor Imagery EEG Signals For Efficient Brain Computer Interface System

One of the main problems in Brain Computer Interface (BCI) systems is the non-stationary behavior of the electroencephalography (EEG) signals causing problems in real time applications. Another common problem in BCI systems is the situation where the labeled data are scarce. In this study, we take a semi-supervised learning perspective and propose solving both types of problems by updating the BCI system with labels obtained from the outputs of the classifier. To test the approach, data from motor imagery BCI system are used. Attributes extracted from EEG signals are classified with Linear Discriminant Analysis (LDA) and Support Vector Machines (SVM). With respect to the static classifiers, accuracy was improved approximately 4% using the proposed adaptation approach in the case of a training dataset. Even though the difference between the performance of static and adaptive classifiers decreases as the size of training data increases, the accuracy of our proposed adaptive classifier remains higher. The proposed approach has also improved the performance of a BCI system around 4% in the case of non-stationary signals as well.

The structure and functioning of the human brain has always attracted the attention of scientists. In the past 10-20 years, one of the popular areas of study related to the human brain is the Brain Computer Interface (BCI) systems. Different brain monitoring techniques such as EEG, fNIRS, MEG can be used to observe human brain activities in BCI systems. In addition to the differences in monitoring methods in BCI systems, the focus of system operation may also change. In some BCI systems, it may be preferable to focus on Motor Imagery in another system, while the focus is on the P300 signals in EEG data. This requires a differentiation between the systems during the operational phases of the BCI system. One of the most significant points of system differentiation is the classification stage of the BCI system. In this study, a compilation of classification methods commonly used in Brain Computer Interface systems based on EEG based Motor Imagery will be carried out. This study will provide researchers with information about the methods that can be used in their own systems for classification in Brain Computer Interface systems based on EEG based Motor Imagery.

Brain-Computer Interface (BCI) systems establish a control and communication relationship between the human brain and computers including robots or other devices to help individuals with severe motor disabilities. The classification of motor and mental imagery electroencephalogram (EEG) signals is complicated because these signals are usually case-specific and distinct models must be trained for each subject to process and classify his/her EEG signals. Moreover, in BCI systems EEG signals are processed online, so the time latency must be very low. In this paper, we have proposed a method based on signal-to-image conversion to investigate image processing techniques in the pair-wise classification of motor and mental imagery EEG signals. We first decomposed EEG signals of each trial into four sub-bands. Then, for each sub-band, we converted EEG time series to 2-dimensional (2D) images using covariance between signals of all channels. Then, statistical, textural and PCA-based features were extracted from these images and fed to a support vector machine (SVM) classifier. Our results were promising in the offline processing and achieved an average classification accuracy of 79.57%.

The modern commercial industry is increasingly dependent on the analysis of vast data records. Analysing big electroencephalogram (EEG) signal data (called brain signal data) plays an important role in a wide variety of applications such as healthcare practices, brain computer interface (BCI) systems, innovative education, privacy and security, and biometrics. The key objective of this paper is to establish a methodological framework for identifying communicative intentions of motor disabled people from EEG data for application in BCI systems. The proposed framework is designed based on common spatial pattern (CSP) data method and optimized ensemble (OE) machine learning method for the application of BCI technologies. The CSP method is used for discovering important features from EEG data and finally the extracted features are fed as an input to optimized ensemble (OE) method. The proposed method was tested on BCI Competition III dataset IVa, which contains motor imagery-based EEG signal data. The experimental results show that our proposed method can handle brain signal big data for identifying communicative intentions for an advanced BCI system. We compared the performance of our proposed method with several other existing methods. In comparison with other established methods, our method achieves higher classification accuracy performance. This research assists the experts in processing and analysing EEG signals for BCI applications. It also supports technologists to create a new EEG data analyser for BCI systems.KeywordsElectroencephalographyBrain computer interfaceCommon spatial patternMachine learning

Brain Computer Interface (BCI) systems have gained great visibility in the last years as they represent a quite innovative way of communication and a new instrument aimed at exploring brain functions. A lot of research labs are developing their own BCI system, everyone being involved in some particular aspects of them. At the "Tor Vergata" University our purpose is to develop tools for the evaluation and the optimization of the performances of BCI systems and to delineate some criteria for the analysis and implementation of different BCI systems; also we have defined file formats for BCI data in order to allow the sharing of tools among groups and to create models for the generalization and therefore the unification of the resources. All the tools and routines mentioned are part of the Body Language Framework++ 2.0.

BackgroundA novel artefact removal algorithm is proposed for a self-paced hybrid brain-computer interface (BCI) system. This hybrid system combines a self-paced BCI with an eye-tracker to operate a virtual keyboard. To select a letter, the user must gaze at the target for at least a specific period of time (dwell time) and then activate the BCI by performing a mental task. Unfortunately, electroencephalogram (EEG) signals are often contaminated with artefacts. Artefacts change the quality of EEG signals and subsequently degrade the BCI’s performance.MethodsTo remove artefacts in EEG signals, the proposed algorithm uses the stationary wavelet transform combined with a new adaptive thresholding mechanism. To evaluate the performance of the proposed algorithm and other artefact handling/removal methods, semi-simulated EEG signals (i.e., real EEG signals mixed with simulated artefacts) and real EEG signals obtained from seven participants are used. For real EEG signals, the hybrid BCI system’s performance is evaluated in an online-like manner, i.e., using the continuous data from the last session as in a real-time environment.ResultsWith semi-simulated EEG signals, we show that the proposed algorithm achieves lower signal distortion in both time and frequency domains. With real EEG signals, we demonstrate that for dwell time of 0.0s, the number of false-positives/minute is 2 and the true positive rate (TPR) achieved by the proposed algorithm is 44.7%, which is more than 15.0% higher compared to other state-of-the-art artefact handling methods. As dwell time increases to 1.0s, the TPR increases to 73.1%.ConclusionsThe proposed artefact removal algorithm greatly improves the BCI’s performance. It also has the following advantages: a) it does not require additional electrooculogram/electromyogram channels, long data segments or a large number of EEG channels, b) it allows real-time processing, and c) it reduces signal distortion.

Brain Computer Interfacing (BCI) systems, which are a new communicating channel between humans and the computers are growing rapidly. One such a method is based on the Steady State Visual Evoked Potentials (SSVEP), which can be recorded during visual stimulating of the subject by a twinkling light source with a fixed frequency. An important parameter to be considered is the effect of the inter-sources distance on the accuracy of such BCI systems. In particular inter-sources (LEDs) distances of 4, 14, 24, 44 and 64 cm when the sources plane is located 60 cm away from the subject's eyes (producing inter-sources visual angles of 3.8°, 13.4°, 22.6°, 40.2° and 56° respectively) were examined. In addition, four different sweep lengths of 0.5, 1, 2 and 3 seconds are considered. In addition, due to the usage of the AR models for feature extraction from the SSVEP signals, selection of the best AR model together with the best classifier among the LDA, the SVM and the Naive Bayes are studied. It is showed that the BCI system with D=44 cm, AR order of 13 and either the LDA or the SVM classifiers could produce the best results compared to the other cases.

Mostly in natural disaster situations, for example an earthquake, we will face a situation where people get trapped and unable to be found as soon as possible due to the unpredictable terrain. Hence, robot is being seen as scouts that able to adapt and perceive, and usually snake type robot is able to move throughout rubble and small confines. Then, the idea of using modular self-reconfigurable (MSR) robots based on CEBOT in 1988 spark an interest to researchers to fit the search and rescue purpose. Besides that, the idea of controlling robots without manual control but by using “thinking” have fascinated researchers and lead to the development of interfaces between human and machines. In 1970, a Brain Computer Interface (BCI) system has been establish and the BCI system usually is based on the Electroencephalogram (EEG) which is the electrical potentials generated in which the information generated by user and independent of any muscular activities. The implementations of both technologies to each other will frontier for a new alternatives which improves self-reconfigurable modular robot in term of control strategy. As a preliminary framework, a simulation is needed to determine both systems capabilities, and it can be achieved by interfacing the robot simulator, OpenVIBE and Virtual Experimentation Platform (V-REP) with the Python programming language. This study presentation will focus on how to control the modular robot in V-REP environment by using Python language which can be used for interfacing with BCI system created in OpenVIBE software and the simulated robot configuration. Each joint handles of modular robot based on V-REP hierarchy being streamed by Python language. There are several methods for establishment of communication between OpenVIBE and other applications. The method purpose in this paper will utilizing Lab Streaming Layer (LSL) and Python script as mediator. The outcome that is expected to be obtained for this study will be the success of communication establish to control virtual modular robot based on data from OpenVIBE. The future work based on this study will involving the BCI system designed using OpenVIBE and implementation to real modular robot might be applied.

During recent years there has been a growing interest in Brain Computer Interface (BCI) systems as an alternative means of interaction with the external world for people with severe motor disabilities. The use of the P300 event-related potentials as control feature allows users to choose between various options (letters or icons) requiring a very short calibration phase. The aim of this work is to improve performances and flexibility of P300 based BCIs. An efficient BCI system should be able to understand user's intentions from the ongoing EEG, abstaining from doing a selection when the user is engaged in a different activity, and changing its speed of selection depending on current user's attention level. Our self-paced system addresses all these issues representing an important step beyond the classical synchronous P300 BCI that forces the user in a continuous control task. Experimentation has been performed on 10 healthy volunteers acting on a BCI-controlled domestic environment in order to demonstrate the potential usability of BCI systems in everyday life. Results show that the self-paced BCI increases information transfer rate with respect to the synchronous one, being very robust, at the same time, in avoiding false negatives when the user is not engaged in a control task.

Motor imagery classification in electroencephalography (EEG)-based brain-computer interface (BCI) systems is an important research area. To simplify the complexity of the classification, selected power bands and electrode channels have been widely used to extract and select features from raw EEG signals, but there is still a loss in classification accuracy in the state-of-the-art approaches. To solve this problem, we propose a discriminative feature extraction algorithm based on power bands with principle component analysis (PCA). First, the raw EEG signals from the motor cortex area were filtered using a bandpass filter with μ and β bands. This research considered the power bands within a 0.4 second epoch to select the optimal feature space region. Next, the total feature dimensions were reduced by PCA and transformed into a final feature vector set. The selected features were classified by applying a support vector machine (SVM). The proposed method was compared with a state-of-art power band feature and shown to improve classification accuracy.

ObjectiveDecoding arm movement kinematics from motor imagery can provide more natural control of the Brain-Computer Interface (BCI) system. This work aims to decode two-directional (left versus right direction) motor imagery hand movement using Electroencephalogram (EEG)-based BCI. Direction decoding from EEG is challenging due to the low signal-to-noise ratio and poor spatial resolution. To improve the direction decoding accuracy during an online session, this work proposes an additional corrective step using Error-Related Potential (ErrP). MethodsIn this work, a direction decoding model and an ErrP detection model are trained on calibration session data. During the online session, the trained direction decoding model uses segmented MI trials as input, and the decoded outcome is shown in real-time as feedback. The brain response to feedback shown is used to detect the presence of ErrP using a trained ErrP detection model. If the ErrP is detected, the outcome of the direction decoding model will be automatically corrected, which offers an improvement in the performance of the BCI system. ResultsThe online session is conducted on 14 healthy subjects’ data. The average online direction decoding accuracy of the proposed direction decoding model without the ErrP-based corrective step is 54.9%. The average sensitivity and specificity of the proposed ErrP detection model during the online session are 65.3% and 67.5%, respectively. Further, the proposed scheme of cascaded direction decoding model and ErrP detection model achieves an average online direction decoding accuracy of 64.9%, which is an improvement of 10% compared to the scheme without the ErrP detection model. SignificanceThis paper proposes the efficient use of the brain’s ErrP response to the visual neurofeedback presented to the user, in an online hand motor imagery direction decoding experiment paradigm. The significant improvement of the direction decoding accuracy achieved is a promising result that makes the existing BCI systems’ usability a step closer to practical real-world applications.

Background Due to the redundant information contained in multichannel electroencephalogram (EEG) signals, the classification accuracy of brain-computer interface (BCI) systems may deteriorate to a large extent. Channel selection methods can help to remove task-independent electroencephalogram (EEG) signals and hence improve the performance of BCI systems. However, in different frequency bands, brain areas associated with motor imagery are not exactly the same, which will result in the inability of traditional channel selection methods to extract effective EEG features. New Method To address the above problem, this paper proposes a novel method based on common spatial pattern- (CSP-) rank channel selection for multifrequency band EEG (CSP-R-MF). It combines the multiband signal decomposition filtering and the CSP-rank channel selection methods to select significant channels, and then linear discriminant analysis (LDA) was used to calculate the classification accuracy. Results The results showed that our proposed CSP-R-MF method could significantly improve the average classification accuracy compared with the CSP-rank channel selection method.

The common spatial pattern (CSP) is a popular method in feature extraction for motor imagery (MI) electroencephalogram (EEG) classification in brain-computer interface (BCI) systems. However, combining temporal and spectral information in the CSP-based spatial features is still a challenging issue, which greatly affects the performance of MI-based BCI systems. Here, we propose a novel circulant singular spectrum analysis embedded CSP (CiSSA-CSP) method for learning the optimal time-frequency-spatial features to improve the MI classification accuracy. Specifically, raw EEG data are first segmented into multiple time segments and spectrum-specific sub-bands are further derived by CiSSA from each time segment in a set of non-overlapping filter bands. CSP features extracted from all time-frequency segments contain more sufficient time-frequency-spatial information. An experimental study was implemented on the publicly available EEG dataset (BCI Competition III dataset IVa) and a self-collected experimental EEG dataset to validate the effectiveness of the CiSSA-CSP method. Experimental results demonstrate that discriminative and robust features are extracted effectively. Compared with several state-of-the-art methods, the proposed method exhibited optimal accuracies of 96.6% and 95.2% on the public and experimental datasets, respectively, which confirms that it is a promising method for improving the performance of MI-based BCIs.

Brain computer interface (BCI) system is field of neurotechnology that convey command from human brain to a computer. BCI is currently most growing field in the research area. BCI applications have different field such as medical, education, neuroergonomics, self-regulation, games and entertainment, production, security as well as marketing. Electronic devices can be controlled using brain signal called electroencephalography (EEG) to record electrical activity of the brain. The P300 wave is a positive peak of an event related potential (ERP) that occurs 300ms recorded by EEG. One major approach in the BCI research field is the P300 based oddball paradigm, subjects identify infrequent target stimuli within a series of rapid presented standard stimuli. The P300-speller is a widely used BCI system that allows users to communicate characters by focused attention. In our study, we are focusing on BCI system architecture different applications of BCI specifically P300 speller which classifies P300 waves and recognize targeted character, on the dataset II of the third BCI competition.

Exploring dimensionality reduction of EEG features in motor imagery task classification