Attack signature matching using graphics processors in high-performance intrusion detection systems

Today by growing network systems, security is a key feature of each network infrastructure. Network Intrusion Detection Systems (IDS) provide defense model for all security threats which are harmful to any network. The IDS could detect and block attack-related network traffic. The network control is a complex model. Implementation of an IDS could make delay in the network. Several software-based network intrusion detection systems are developed. However, the model has a problem with high speed traffic. This paper reviews of many type of software architecture in intrusion detection systems and describes the design and implementation of a high-performance network intrusion detection system that combines the use of software-based network intrusion detection sensors and a network processor board. The network processor which is a hardware-based model could acts as a customized load balancing splitter. This model cooperates with a set of modified content-based network intrusion detection sensors rather than IDS in processing network traffic and controls the high-speed.

Attacks on networks are currently the most pressing issue confronting modern society. Network risks affect all networks, from small to large. An intrusion detection system must be present for detecting and mitigating hostile attacks inside networks. Machine Learning and Deep Learning are currently used in several sectors, particularly the security of information, to design efficient intrusion detection systems. These systems can quickly and accurately identify threats. However, because malicious threats emerge and evolve regularly, networks need an advanced security solution. Hence, building an intrusion detection system that is both effective and intelligent is one of the most cognizant research issues. There are several public datasets available for research on intrusion detection. Because of the complexity of attacks and the continually evolving detection of an attack method, publicly available intrusion databases must be updated frequently. A convolutional recurrent neural network is employed in this study to construct a deep-learning-based hybrid intrusion detection system that detects attacks over a network. To boost the efficiency of the intrusion detection system and predictability, the convolutional neural network performs the convolution to collect local features, while a deep-layered recurrent neural network extracts the features in the proposed Hybrid Deep-Learning-Based Network Intrusion Detection System (HDLNIDS). Experiments are conducted using publicly accessible benchmark CICIDS-2018 data, to determine the effectiveness of the proposed system. The findings of the research demonstrate that the proposed HDLNIDS outperforms current intrusion detection approaches with an average accuracy of 98.90% in detecting malicious attacks.

This paper describes the ESIDE-Depian intrusion detection and prevention system, which uses Bayesian structural and parametric learning and also evidence propagation and adaptation, in order to improve the accuracy and manageability of network intrusion detection systems (NIDS). Current NIDS do not consider the two main detection paradigms, i.e. misuse detection and anomaly detection, in an unified style, so the analysis is not inherently complete. Besides, historical data are not generally used, neither for analysis nor for sequential adaptation of the knowledge representation models used for detection; hence this wealthy information about the essence and the potential trends of the target system is not commonly considered. Thus, by the generalized use of Bayesian belief networks, ESIDE-Depian achieves the main goal of detecting and preventing both well-known and also zero-day attacks with excellent results, by means of unified real-time analysis of network traffic.

Many network security applications such as Intrusion Detection System (IDS), Firewall and Data Loss Prevention System (DLPS) are based on deep packet inspection, in this packets header as well as payload of the packets are checked with predefined attack signature to identify whether it contains malicious traffic or not. To perform this checking different pattern matching methods are used by NIDS. The most popular method to implement pattern matching is to use of Finite Automata (FA). Generally, regular expressions are used to represent most of the attack signatures defined by NIDS. They are implemented using finite automata, which takes the payload of packet as input string. However, existing approaches of Finite Automata (FA), both deterministic finite automata (DFA) and non-deterministic finite automata (NFA) for pattern matching are having their own advantages and some drawbacks. The DFA based pattern matching methods are fast enough but require more memory. However, NFA based pattern matching methods are comparatively takes less memory but the speed of matching is very slow, to overcome these drawbacks of finite automata there are many approaches have been proposed. This paper discuses comparative study of some Finite Automata (FA) based techniques for pattern matching in network intrusion detection system (NIDS).

Network Intrusion Detection System (NIDS) has become more important as a large number of diverse devices connect to the Internet of Things (IoT). Generally, training an effective NIDS requires a large amount of high-quality and centralized attack data. However, in real-world scenarios, it is difficult to centralize the distributed data for training NIDS in the IoT due to the privacy concerns and data format heterogeneity. To solve this problem, a novel NIDS combining federated learning and cost-sensitive learning is proposed, named FIDS-CL. Specifically, federated learning with dynamic weights aggregation tackles the problem of non-clusterable data, where multiple clients collaboratively enhance the overall performance while dynamically aggregating weights to maximize the retention of high-performing client models. Moreover, cost-sensitive learning is employed to alleviate the problem of class imbalance in NIDS by dynamically adjusting the gradient descent weights of different classes in the loss function, thereby emphasizing the importance of minority classes. Therefore, our method can effectively handle data imbalance while safeguarding data privacy of clients, which is more effective to detect network intrusions. The experiments conducted across various scenarios validate the superior detection capabilities and computational efficiency of FIDS-CL when compared to other state-of-the-art NIDSs.

Network intrusion detection systems are considered as one of the basic entities widely utilized and studied in the field of network security that aim to detect any hostile intrusion within a given network. Among many network intrusion detection systems (NIDS), open source systems have gained substantial preference due to their flexibility, support and cost effectiveness. Snort, an open source system is considered as the de-facto standard for NIDS. In this paper, effort has been made to gauge Snort in terms of performance (packet handling) and detection accuracy against TCP Flooding Distributed Denial of Service attack. The evaluation has been done using a sophisticated test-bench under different hardware configurations. This paper has analyzed the major factors affecting the performance and detection capability of Snort and has recommended techniques to make Snort a better intrusion detection system (IDS). Experimental results have shown significant improvement in Snort packet handling capability by using better hardware. However; Snort detection capability is not improved by improving hardware and is dependent upon its internal architecture (signature database and rate filtration). Furthermore, the findings can be applied to other signature based intrusion detection systems for refining their performance and detection capability.

Network Intrusion Detection Systems (NIDS) are utilized to find hostile network connections. This can be accomplished by looking at traffic network activity, but it takes a lot of work. The NIDS heavily utilizes approaches for data extraction and machine learning to find anomalies. In terms of feature selection, NIDS is far more effective. This is accurate since anomaly identification uses a number of time-consuming features. Because of this, the feature selection method influences how long it takes to analyze movement patterns and how clear it is. The goal of the study is to provide NIDS with an attribute selection approach. PSO has been used for that purpose. The Network Intrusion Detection System that is being developed will be able to identify any malicious activity in the network or any unusual behavior in the network, allowing the identification of the illegal activities and safeguarding the enormous amounts of confidential data belonging to the customers from being compromised. In the research, datasets were produced utilising both a network infrastructure and a simulation network. Wireshark is used to gather data packets whereas Cisco Packet Tracer is used to build a network in a simulated environment. Additionally, a physical network consisting of six node MCUs connected to a laptop and a mobile hotspot, has been built and communication packets are being recorded using the Wireshark tool. To train several machine learning models, all the datasets that were gathered—created datasets from our own studies as well as some common datasets like NSDL and UNSW acquired from Kaggle—were employed. Additionally, PSO, which is an optimization method, has been used with these ML algorithms for feature selection. In the research, KNN, decision trees, and ANN have all been combined with PSO for a specific case study. And it was found demonstrated the classification methods PSO + ANN outperformed PSO + KNN and PSO + DT in this case study.

The widely deployment of infrastructure and wireless interfaces increases industrial IoT (IIoT) vulnerability to network intrusions, highlighting the requirements for robust network intrusion detection systems (NIDSs). Although deep learning (DL) provides a promising solution for NIDSs, it remains susceptible to adversarial attacks as minor input perturbations can lead to major misclassifications. In this paper, we propose a packet-level adversarial traffic generation (PATG) approach for attacking NIDSs in IIoT, which not only aligns with domain constraints but also evades various DL-based NIDSs. Particularly, we introduce a reversible abstract traffic representation to ensure that the original traffic can be effectively modified while preserving its functionality. We propose a packet-level generative adversarial networks to craft adversarial traffic by learning benign data distribution in feature space and simulating evasion behaviors, which escapes the DL-based NIDSs. We further design two defense schemes to enhance system resilience against proposed adversarial attacks. We evaluate PATG on nine state-of-the-art DL-based NIDSs in the Kitsune and CICIoT23 datasets. Experimental results demonstrate that PATG can achieve a maximum evasion increase rate of 99% with cost-effective execution, while the defense methods significantly mitigate the impact of the adversarial attacks.

Nature-inspired intrusion detection system for protecting software-defined networks controller

In recent years industrial control systems using networks for communication and Transmission Control Protocol (TCP) are normally used in supervisory layer, so malicious outsider and insider can attack through network. One of useful based model methods for fault detection and isolation is Unknown Input Observers (UIO). Some previous works that used UIO, observe dynamic of the physical system to detect attacks. This paper first describes how attacker can make Denial of Service (DoS) in active queue management and by using UIO, designed Network Intrusion Detection System (NIDS) that use fluid flow model, then fusion information of NIDS and Host Intrusion Detection Systems (HIDS). Distributed Intrusion Detection System (DIDS), detects abnormal behavior of network and physical system and alarms for three state: free attack, DoS and deception attack. So false negative for free attack and false positive for DoS attack are being reduced. Simulation results demonstrate the high success level of this approach for detecting attacks.

As cyber threats continue to evolve in complexity and frequency, conventional intrusion detection systems (IDS) often fail to detect advanced and novel attacks. This project introduces an intelligent Network Intrusion Detection System (NIDS) leveraging Deep Learning to efficiently identify and categorize network intrusions. It analyzes live network traffic and determines whether it is legitimate or malicious using advanced machine learning models. Prior to training, the dataset undergoes preprocessing with techniques like One-Hot Encoding and Min-Max Scaling to enhance model performance. The final model is integrated into a Flask-based web application that provides real-time monitoring and alerts for suspicious activity. Unlike traditional IDS that rely on predefined signatures, this solution is capable of identifying zero-day threats by recognizing behavioral patterns in historical data. By evaluating and comparing different deep learning architectures, the system strives for superior detection metrics such as accuracy, precision, and recall. Ultimately, this approach aims to strengthen organizational cybersecurity and minimize the risk of data breaches and unauthorized access. Key Words: Network Intrusion Detection System (NIDS), Intrusion Detection System (IDS), Deep Learning,Cybersecurity

The purpose of this work is to study the priorities in the deployment of network intrusion detection systems (NIDS) in small corporate networks. The goal is to minimize costs while optimizing performance. Despite apparent benefits of automated intrusion detection systems (IDS), they are not widely deployed at this time. Our main research problem is defining key cost areas of NIDS deployment and then developing ways to achieve the required functionality with minimal costs. We present a concept of pre-ids stage, where small, isolated tools are used to target network security problems. The ease of deployment and low maintenance costs help of these tools allow to combat a large part of these problems at a fraction of the costs of a full IDS.

Intrusion detection is a familiar phrase in the information and network security domain. An Intrusion Detection System (IDS) is a device or software that will keep track of the networks, for unlawful movements, and policy breaches that arise within the network. There are different forms of IDS, Host Intrusion Detection System (HIDS) helps in identifying unauthorized activities on the host, Network Intrusion Detection System (NIDS) helps in identifying attacks in the network, whereas Distributed Intrusion Detection System (DIDS) consists of multiple IDS over a large area of network where individual IDS communicates with each other or with the central the authorized central server. The proposed work has a three-layered architecture for DIDS for securing data sharing among different IDS. The bottom layer uses multiple IDS, the fog layer is supported with Blockchain functionality, and the cloud service at the upper layer stores required data permanently for future analysis. The fog computing-based architecture for DIDS tries to implement the application in a scalable and trustless environment using distributed ledger technology. The evaluation of the proposed work is carried out for fog, cloud, and integrated fog-cloud with the Blockchain functionality and without Blockchain functionality in measuring performance metrics related to throughput, service latency, response time, block creation time, and block execution time.

This paper presents an overview of the technologies and the methodologies used in Network Intrusion Detection and Prevention Systems (NIDPS). Intrusion Detection and Prevention System (IDPS) technologies are differentiated by types of events that IDPSs can recognize, by types of devices that IDPSs monitor and by activity. NIDPSs monitor and analyze the streams of network packets in order to detect security incidents. The main methodology used by NIDPSs is protocol analysis. Protocol analysis requires good knowledge of the theory of the main protocols, their definition, how each protocol works.Keywords: Intrusion Detection and Prevention System, Protocol Analysis, Sensor, Signature, State(ProQuest: ... denotes formulae omitted.)1 IntroductionIncreasing size and complexity of the Internet and Intranet networks have led to increasing number of vulnerabilities that could be exploited. Thus, the internal and external attacks on the information systems are increasing at an alarming rate. Also, these are becoming more severe and sophisticated. The attackers find ingenious ways to bypass the security controls and to compromise the security and the well functioning of the information systems. They are motivated by financial, political, and military objectives. In this context, defending wide area networks from malicious traffic, unauthorized access to systems involves many problems.In security information systems Network Intrusion Detection and Prevention Systems (NIDPS) are important tools to detect possible incidents and also, to attempt to stop them in real time. Due to changing attacks, intrusion detection methodologies and technologies continuously evolve, adding new detection capabilities, to avoid detection. They must adapt to new forms of malware, to the public networks, increased traffic.2 Concepts of Intrusion DetectionAn intrusion is a successful action to gain access to an information system, to compromise it or to make it unavailable. This is possible due to the presence of vulnerability in the target system that can be exploited by a motivated intruder.Intrusion Detection and Prevention is the process of monitoring the information systems by sensors or agents and analyzing the collected information to detect and to attempt to stop the attacks in real time, identifying vulnerabilities, the violation of security policies or standard security practices.An Intrusion Detection and Prevention System (IDPS) is a tool that monitors information systems, collects, analyzes information, and initiates responses when an intrusion is detected.Intrusion Detection Systems (IDSs) mainly work as defensive mechanisms. They only alert the system administrators that an incident has occurred. Intrusion Prevention Systems (IPSs) can take some actions to attempt to stop the attack, such as breaking the connection or modifying the firewall rules to deny access to the intruder. The response of the classic IDS can be slow if the system administrator is busy while the response of the IPS is automatic. An architecture that uses together IPS and IDS technologies is the best solution for defense in depth.Conceptually, a generic IDPS consists of modular components. It mainly has the following components: monitoring system, storage, analyzer, and responder.* Monitoring system - monitors and logs the events in a computer system or network;* Storage - stores information, called audit record, about suspicious activities or intrusions; also, the security policies used in analysis are stored;* Analyzer - uses different analysis methodologies to detect the incidents;* Responder - the response mechanism of incidents.The IDPSs could be classified as:* By detection methodology [12], [18]:- misuse-based detection- anomaly-based detection- stateful protocol analysis* By activity [12]:- network-based- wireless-based- network behavior analysis- host-based* By behavior on detection:- passive- active* By collection and analysis frequency:- continuous- periodicThe detection methodologies describe the characteristics of the analyzer. …

Weight embedding autoencoder as feature representation learning in an intrusion detection systems