Attitude control of underactuated spacecraft through flywheels motion using genetic algorithm with wavelet approximation

In this paper, an iterative adaptive dynamic programming (ADP) algorithm is developed to solve the optimal cooperative control problems for residential multi-battery systems. To avoid solving high-dimensional optimal control problems, we first constrain all the batteries at their worst performance, which transforms the multi-input optimal control problem into a single-input one. Based on the worst-performance optimal control law, the optimal cooperative control law for the residential multi-battery systems is obtained, where in each iteration, only a single-input optimization problem is implemented. Finally, numerical results are given to illustrate the performance of the developed algorithm.

This article addresses the optimal tracking control problem with prescribed performance for uncertain nonlinear systems subject to input constraint and unknown disturbances. First, a fixed‐time monotonic convergence function is introduced to restrain tracking error, and a nonlinear mapping technique is employed to transform the constrained error into an unconstrained variable, then the fixed‐time output tracking issue is boiled down to the boundedness problem of the transformed variable. With the aid of a nonquadratic cost function, the input constraint is encoded into the optimization problem. To solve the unknown disturbances, an auxiliary system and an auxiliary disturbance policy are constructed, and the optimal control problem is formulated as a two‐player zero‐sum game. Moreover, a Hamilton–Jacobi–Isaacs (HJI) equation associated with this nonquadratic zero‐sum game is established to give the optimal control and the worst‐case disturbance policy solution. Subsequently, to avoid using knowledge of the system dynamics, three neural network approximators, namely, actor, critic, and disturbance, which are tuned online and simultaneously for approximating the solution of HJI, are constructed based on the integral reinforcement learning algorithm. Theoretical analysis shows that the reconstructed error system states and the weight estimation errors are semi‐globally uniformly ultimately bounded. Finally, the simulation study further tests the availability of the proposed control strategy.

Decomposition method for solving two optimal control problems and one optimization problem in batch fermentation is proposed. The problems are formulated based on a nonstructured mathematical model with slowly varying parameters and a finite cost criterion of maximum end production. Dependence of the model parameters on one physical or chemical parameter, which could easily be used as a control input is introduced analytically in the model equations and three model descriptions are obtained by nonlinear difference equations. Sensitivity functions of state trajectories towards slowly varying coefficients are introduced to account for model uncertainties. Based on them extended optimal control and optimization problems are formulated.

1 A Survey on Computational Optimal Control.- Issues in the Direct Transcription of Optimal Control Problems to Sparse Nonlinear Programs.- Optimization in Control of Robots.- Large-scale SQP Methods and their Application in Trajectory Optimization.- Solving Optimal Control and Pursuit-Evasion Game Problems of High Complexity.- 2 Theoretical Aspects of Optimal Control and Nonlinear Programming.- Continuation Methods In Boundary Value Problems.- Second Order Optimality Conditions for Singular Extremals.- Synthesis of Adaptive Optimal Controls for Linear Dynamic Systems.- Control Applications of Reduced SQP Methods.- Time Optimal Control of Mechanical Systems.- 3 Algorithms for Optimal Control Calculations.- Second Order Algorithm for Time Optimal Control of a Linear System.- An SQP-type Solution Method for Constrained Discrete-Time Optimal Control Problems.- Numerical Methods for Solving Differential Games, Prospective Applications to Technical Problems.- Construction of the Optimal Feedback Controller for Constrained Optimal Control Problems with Unknown Disturbances.- Repetitive Optimization for Predictive Control of Dynamic Systems under Uncertainty.- Optimal Control of Multistage Systems Described by High-Index Differential-Algebraic Equations.- A New Class of a High Order Interior Point Method for the Solution of Convex Semiinfinite Optimization Problems.- A Structured Interior Point SQP Method for Nonlinear Optimal Control Problems.- 4 Software for Optimal Control Calculations.- Automated Approach for Optimizing Dynamic Systems.- ANDECS: A Computation Environment for Control Applications of Optimization.- Application of Automatic Differentiation to Optimal Control Problems.- OCCAL: A mixed symbolic-numeric Optimal Control CALculator.- 5 Applications of Optimal Control.- A Robotic Satellite with Simplified Design.- Nonlinear Control under Constraints of a Biological System.- An Object-Oriented Approach to Optimally Describe and Specify a SCADA System Applied to a Power Network.- Near-Optimal Flight Trajectories Generated by Neural Networks.- Performance of a Feedback Method with Respect to Changes in the Air-Density during the Ascent of a Two-Stage-To-Orbit Vehicle.- Linear Optimal Control for Reentry Flight.- Steady-State Modelling of Turbine Engine with Controllers.- Shortest Paths for Satellite Mounted Robot Manipulators.- Optimal Control of the Industrial Robot Manutec r3.

In general, optimal control problems rely on numerically rather than analytically solving methods, due to their nonlinearities. The direct method, one of the numerically solving methods, is mainly to transform the optimal control problem into a nonlinear optimization problem with finite dimensions, via discretizing the objective functional and the forced dynamical equations directly. However, in the procedure of the direct method, the classical discretizations of the forced equations will reduce or affect the accuracy of the resulting optimization problem as well as the discrete optimal control. In view of this fact, more accurate and efficient numerical algorithms should be employed to approximate the forced dynamical equations. As verified, the discrete variational difference schemes for forced Birkhoffian systems exhibit excellent numerical behaviors in terms of high accuracy, long-time stability and precise energy prediction. Thus, the forced dynamical equations in optimal control problems, after being represented as forced Birkhoffian equations, can be discretized according to the discrete variational difference schemes for forced Birkhoffian systems. Compared with the method of employing traditional difference schemes to discretize the forced dynamical equations, this way yields faithful nonlinear optimization problems and consequently gives accurate and efficient discrete optimal control. Subsequently, in the paper we are to apply the proposed method of numerically solving optimal control problems to the rendezvous and docking problem of spacecrafts. First, we make a reasonable simplification, i.e., the rendezvous and docking process of two spacecrafts is reduced to the problem of optimally transferring the chaser spacecraft with a continuously acting force from one circular orbit around the Earth to another one. During this transfer, the goal is to minimize the control effort. Second, the dynamical equations of the chaser spacecraft are represented as the form of the forced Birkhoffian equation. Then in this case, the discrete variational difference scheme for forced Birkhoffian system can be employed to discretize the chaser spacecraft's equations of motion. With further discretizing the control effort and the boundary conditions, the resulting nonlinear optimization problem is obtained. Finally, the optimization problem is solved directly by the nonlinear programming method and then the discrete optimal control is achieved. The obtained optimal control is efficient enough to realize the rendezvous and docking process, even though it is only an approximation of the continuous one. Simulation results fully verify the efficiency of the proposed method for numerically solving optimal control problems, if the fact that the time step is chosen to be very large to limit the dimension of the optimization problem is noted.

An efficient method is introduced for solving optimal control and optimal parameter selection problems of nonlinear differential-algebraic systems involving general constraints. These infinite dimensional problems are converted into the finite dimensional optimization problems by using the control parametrization technique. Moreover, the transformed time locations for the control variables are included in such problems. As a result, optimal control problems become acausal optimal parameter selection problems. A modified version of differential evolution is introduced to solve these problems. The integration of the penalty functions is used to ensure the solution onto the feasible domain of the problems. Two industrial systems, a chemical reactor and a robotics arm, are used to illustrate the robustness and effectiveness of the method. The control effects can be improved by selecting the proper time locations as observed from the simulated results.

In this paper we investigate the use of optimal control techniques to improve Functional Electrical Stimulation (FES) for drop foot correction on hemiplegic patients. A model of the foot and the tibialis anterior muscle, the contraction of which is controlled by electrical stimulation has been established and is used in the optimal control problem. The novelty in this work is the use of the ankle accelerations and shank orientations (so-called external states) in the model, which have been measured on hemiplegic patients in a previous experiment using Inertial Measurement Units (IMUs). The optimal control problem minimizes the square of muscle excitations which serves the overall goal of reducing energy consumption in the muscle. In a first step, an offline optimal control problem is solved for test purposes and shows the efficiency of the FES optimal control for drop foot correction. In a second step, a Nonlinear Model Predictive Control (NMPC) problem - or online optimal control problem, is solved in a simulated environment. While the ulitmate goal is to use NMPC on the real system, i.e. directly on the patient, this test in simulation was meant to show the feasibility of NMPC for online drop foot correction. In the optimization problem, a set of fixed constraints of foot orientation was applied. Then, an original adaptive constraint taking into account the current ankle height, was introduced and tested. Comparisons between results under fixed and adaptive constraints highlight the advantage of the adaptive constraints in terms of energy consumption, where its quadratic sum of controls, obtained by NMPC, was three times lower than with the fixed constraint. This feasibility study was a first step in application of NMPC on real hemiplegic patients for online FES-based drop foot correction. The adaptive constraints method presents a new and efficient approach in terms of muscular energy consumption minimization.

This article presents a unified approach to simultaneous solution of optimization and optimal control problems in batch distillation, operating under different modes of operation: variable, constant, or optimal reflux. The simplified, computationally efficient short‐cut method and a novel algorithm to solve the optimal control problems in batch distillation is the basis of this unified approach. The short‐cut method identifies the feasible region of operation essential for optimization and optimal control problems, and provides analytical partial derivatives of the model parameters crucial to the solution.The new algorithm for the solution of optimal combination of the maximum principle and NLP optimization techniques. It circumvents the problems associated with the maximum principle approach (iterative solution of a two‐point boundary value problem, undounded control variables, and inability to handle the simultaneous optimization and optimal control problem), and the coupled ODE discretization‐NLP optimization scheme for nonlinear models (higher system nonlinearities, multiplicity of solutions, sensitivity of convergence to initial guesses). This algorithm reduces the dimensionality of the problem, and the nature of the algorithm allows a common platform to optimal solutions of different operating conditions. This article also shows that different categories of the optimal control problems in batch distillation essentially involve the solution of the maximum distillate problem.

The optimal control problem of linear quadratic regulation (the LQR problem) for linear discrete-time systems with single input delay is studied in this paper. A new and simple approach is applied to derive the optimal control input sequences. With the established duality, we first show that the LQR problem is equivalent to an optimization problem in Krein space. The latter problem is finally converted to a strictly convex quadratic programming problem. Thus we convert the delayed control input into control input delay-free, and convert a dynamic LQR optimal control problem for the linear discrete-time systems into a static mathematical programming model. The optimal control input sequences are successfully derived by solving this strictly convex quadratic programming problem. Our approach is simple and yet very effective in dealing with the LQR problem for the linear discrete-time systems with single input delay.

This paper builds up two equivalence theorems for different kinds of optimal control problems of internally controlled Schrodinger equations. The first one is an equivalence of the minimal norm and the minimal time control problems where the target sets are the origin of the state space. (The minimal time control problems are also called the first type of optimal time control problems.) The second one is an equivalence of three optimal control problems: optimal target control problems, optimal norm control problems, and the second type of optimal time control problems.

In this paper, we consider a class of optimal switching control problems with multiple time-delays and a cost on changing control and subject to terminal state constraints. A computational method involving three stages is developed to solve this class of optimal control problems. First, by parameterizing the control function with piecewise-constant functions, the optimal switching control problem is approximated by a sequence of finite-dimensional optimization problems, where the original switching times, the control heights and the control switching times are decision variables. Second, by introducing new variables, the total variation of the control variables is transformed into an equivalently smooth function. Third, we convert the constrained optimization problem into one only with box constraints by an exact penalty function method. The gradients of the cost functional are then derived, which can be combined with any gradient-based optimization method to determine the optimal solution. Finally, a numerical example is given to illustrate the effectiveness of the proposed algorithm.

Beyond Lack of Compactness and Lack of Stability of a Coupled Parabolic-Hyperbolic Fluid-Structure System.- A Continuous Adjoint Approach to Shape Optimization for Navier Stokes Flow.- Recent Advances in the Analysis of State-constrained Elliptic Optimal Control Problems.- Fast and Strongly Localized Observation for a perturbed Plate Equation.- Representations, Composition, and Decomposition of C 1,1-hypersurfaces.- On Some Nonlinear Optimal Control Problems with Vector-valued Affine Control Constraints.- Weak Solutions to a Model for Crystal Growth from the Melt in Changing Magnetic Fields.- Lavrentiev Prox-regularization Methods for Optimal Control Problems with Pointwise State Constraints.- Nonlinear Feedback Solutions for a Class of Quantum Control Problems.- Optimal Feedback Synthesis for Bolza Control Problem Arising in Linearized Fluid Structure Interaction.- Single-step One-shot Aerodynamic Shape Optimization.- Shape Differentiability of Drag Functional for Compressible Navier-Stokes Equations.- Null-controllability for a Coupled Heat-Finite-dimensional Beam System.- Feedback Modal Control of Partial Differential Equations.- Optimization Problems for Thin Elastic Structures.- A New Non-linear Semidefinite Programming Algorithm with an Application to Multidisciplinary Free Material Optimization.- How to Check Numerically the Sufficient Optimality Conditions for Infinite-dimensional Optimization Problems.- Hidden Boundary Shape Derivative for the Solution to Maxwell Equations and Non Cylindrical Wave Equations.

Optimal control for multistage uncertain random dynamic systems with multiple time delays

On the stochastic linear quadratic control problem with piecewise constant admissible controls

Previous article Next article The Reduction of Certain Control Problems to an “Ordinary Differential” TypeJ. WargaJ. Wargahttps://doi.org/10.1137/1010036PDFBibTexSections ToolsAdd to favoritesExport CitationTrack CitationsEmail SectionsAbout Previous article Next article FiguresRelatedReferencesCited byDetails Stationarity conditions in optimal control problems class related to dynamical objects group control Cross Ref On the First- and Second-Order Conditions in Optimal Control Problems Related to Autonomous Objects Group lifecycle Cross Ref Optimal Control Problems with Time Delays: Constancy of the HamiltonianRichard B. Vinter25 July 2019 | SIAM Journal on Control and Optimization, Vol. 57, No. 4AbstractPDF (525 KB)On obtaining the stationarity conditions in an optimal control problem for a trajectory with a smooth contact with the phase boundary Cross Ref On one Method to Obtain Stationarity Conditions for an Optimal Control Problem Trajectory With a Smooth Boundary ContactIFAC-PapersOnLine, Vol. 51, No. 32 Cross Ref The Maximum Principle for Optimal Control Problems with Time DelaysA. Boccia and R. B. Vinter19 September 2017 | SIAM Journal on Control and Optimization, Vol. 55, No. 5AbstractPDF (407 KB)Problems with relaxed shifted controls and the pointwise maximum principleNonlinear Analysis: Theory, Methods & Applications, Vol. 75, No. 3 Cross Ref The Instability of Optimal Control Problems to Time DelayAlexey S. Matveev26 July 2006 | SIAM Journal on Control and Optimization, Vol. 43, No. 5AbstractPDF (340 KB)On the Characterization of Properly Relaxed Delayed ControlsJournal of Mathematical Analysis and Applications, Vol. 209, No. 1 Cross Ref Approximation of strongly relaxed minimizers with ordinary delayed controlsApplied Mathematics & Optimization, Vol. 32, No. 1 Cross Ref Jack Warga: In Appreciation14 July 2006 | SIAM Journal on Control and Optimization, Vol. 33, No. 2AbstractPDF (809 KB)Minimizing approximate original solutions for commensurate delayed controlsApplied Mathematics Letters, Vol. 7, No. 5 Cross Ref How to Properly Relax Delayed Controls Cross Ref A proper relaxation of shifted and delayed controlsJournal of Mathematical Analysis and Applications, Vol. 169, No. 2 Cross Ref Optimal controls and their discontinuities in quadratic problems of delay systemsIEEE Transactions on Automatic Control, Vol. 30, No. 7 Cross Ref Optimal Controls with PseudodelaysJ. Warga18 July 2006 | SIAM Journal on Control, Vol. 12, No. 2AbstractPDF (1227 KB)A conservative bound on the estimation error covariance matrix in the presence of correlated driving noise and correlated discrete measurement noiseJournal of Mathematical Analysis and Applications, Vol. 43, No. 2 Cross Ref References Cross Ref Volume 10, Issue 2| 1968SIAM Review History Submitted:18 October 1967Published online:18 July 2006 InformationCopyright © 1968 Society for Industrial and Applied MathematicsPDF Download Article & Publication DataArticle DOI:10.1137/1010036Article page range:pp. 219-222ISSN (print):0036-1445ISSN (online):1095-7200Publisher:Society for Industrial and Applied Mathematics