Attraction-repulsion mechanism-based particle swarm optimization algorithm

The partial shading of a photovoltaic array repeatedly occurs in the natural environment, which can cause a failure of a conventional maximum power point tracking (MPPT) algorithm. In this paper, the convergence conditions of the standard particle swarm optimization (PSO) algorithm are deduced by the functional analysis, and then the influence of the random variables and inertia factor of the algorithm on the trajectory in the particle swarm optimization is analyzed. Based on the analysis results, an improved particle swarm optimization (IPSO) algorithm, which adopts both global and local modes to locate the maximum power point, is proposed. Compared to the standard PSO algorithm, in the improved PSO algorithm, many random and interfered variables are removed, and the structure is optimized significantly. The proposed algorithm is first simulated in MATLAB to ensure its capability. The feasibility of the approach is validated through physical implementation and experimentation. Results demonstrate that the proposed algorithm has the capability to track the global maximum power point within 3.3 s with an accuracy of 99%. Compared with five recently developed Global MPPT algorithms, the proposed IPSO algorithm achieved better performance in the maximum power tracking in the partial shading conditions.

Neural Network system for SoC is one topic in the world. Recently, SoC began to combine AI technique by Python. When developers consider Intelligent system on SoC, the co-design software and hardware are significant. In this case, small devices and embedded system are target system. For IoT, those techniques will grow up in the world. Those cases, avoiding premature convergence while keeping performance is a challenge in training the neural network, especially in a case of large NNs or a large number of training data. In this case, one problem is a huge memory and processing power. For tiny memory and processing system as SoC, we propose an improved particle swarm optimization (PSO) algorithm called the PSOseed2 algorithm for training NN. The PSOseed2 algorithm solves the premature convergence of the standard PSO (SPSO) algorithm by slightly modifying the velocity update function without adding many computational tasks to the SPSO algorithm. We evaluated this algorithm on field programmable gate array (FPGA)-based NN and software-based NN and trained these NNs with different PSO algorithms that are SPSO, PSOseed, PSOseed2, and dissipative PSO. Experimental results with different datasets confirmed that the NNs trained by the proposed PSOseed2 algorithm had better recognition rates and lower global learning errors than the NN trained by other PSO algorithms. In this talk, I would like to talk those relational research in the world and our results and discussion.

In order to improve the stability and sensitivity of particle swarm optimization (PSO) algorithm and to solve the problem of premature convergence, in this re-search, a computer PSO algorithm based on thermodynamic motion mechanism is proposed based on the principle of thermodynamic motion mechanism. Firstly, the thermodynamic motion phenomenon, the diffusion law in kinematics and the standard PSO algorithm are introduced. Then, according to the basic idea of thermodynamic motion mechanism, the standardized PSO algorithm is optimized and its optimization process is introduced. Finally, the experimental results are analysed by setting the test function. The results show that among the five test functions, the computer PSO algorithm based on thermodynamic motion mechanism has a higher probability of jumping out of the local optimal solution. Its robustness and stability are much better than standard PSO algorithms. The evolution ability of the computer PSO algorithm based on thermodynamic motion mechanism is better than that of the standard PSO algorithm. The standard PSO algorithm is superior because it is based on thermodynamic motion mechanism. The research in this paper can provide good guidance for improving the performance of PSO algorithm.

Flatness error is an important factor for effective evaluation of surface quality. The existing flatness error evaluation methods mainly evaluate the flatness error of a small number of data points on the micro scale surface measured by CMM, which cannot complete the flatness error evaluation of three-dimensional point cloud data on the micro/nano surface. To meet the needs of nano scale micro/nano surface flatness error evaluation, a minimum zone method on the basis of improved particle swarm optimization (PSO) algorithm is proposed. This method combines the principle of minimum zone method and hierarchical clustering method, improves the standard PSO algorithm, and can evaluate the flatness error of nano scale micro/nano surface image data point cloud scanned by atomic force microscope. The influence of the area size of micro/nano surface topography data on the flatness error evaluation results is analyzed. The flatness evaluation results and measurement uncertainty of minimum region method, standard least squares method, and standard PSO algorithm on the basis of the improved PSO algorithm are compared. Experiments show that the algorithm can stably evaluate the flatness error of micro/nano surface topography point cloud data, and the evaluation result of flatness error is more reliable and accurate than standard least squares method and standard PSO algorithm.

The Particle swarm optimization (PSO) algorithm is a population-based intelligent stochastic search technique encouraged from the intrinsic manner of bee swarm seeking for their food source. With flexibility for numerical experimentation, the PSO algorithm has been mostly used to resolve diverse kind of optimization problems. The PSO algorithm is frequently captured in local optima meanwhile handling the complex real-world problems. Many authors improved the standard PSO algorithm with different mutation strategies but an exhausted comprehensive overview about mutation strategies is still lacking. This article aims to furnish a concise and comprehensive study of problems and challenges that prevent the performance of the PSO algorithm. It has tried to provide guidelines for the researchers who are active in the area of the PSO algorithm and its mutation strategies. The objective of this study is divided into two sections: primarily to display the improvement of the PSO algorithm with mutation strategies that may enhance the performance of the standard PSO algorithm to great extent and secondly, to motivate researchers and developers to use the PSO algorithm to solve the complex real-world problems. This study presents a comprehensive survey of the various PSO algorithms based on mutation strategies. It is anticipated that this survey would be helpful to study the PSO algorithm in detail for researchers.

In the area of cloud computing load balancing, the Particle Swarm Optimization (PSO) algorithm is neoteric and now praised highly, but recently a more neoteric algorithm which deploys the classifier into load balancing is presented. Besides, an algorithm called red-black tree which is aiming at improving the efficiency of resource dispatching is also praised. But the 3 algorithms all have different disadvantages which cannot be ignored. For example, the dispatch efficiency of PSO algorithm is not satisfying; although classifier and red-black tree algorithm improve the efficiency of dispatching tasks, the performance in load balancing is not that good, as a result the improved PSO algorithm is presented. Some researches are designed to get the advantages of new algorithm. First of all, the time complexity and performance for each algorithm in theory are computed; and then actual data which are generated in experiments are given to demonstrate the performance. And from the experiment result, it can be found that for the speed of algorithm itself PSO is the lowest, and the improved PSO solve this problem in some degree; improved PSO algorithm has the best performance in task solving and PSO is the second one, the red-black and Naive Bayes algorithm are much slower; PSO and improved PSO algorithm perform well in load balancing, while the other two algorithms do not do well.

Improved particle swarm optimization algorithm with harmony search (IHPSO) is proposed in this paper. This algorithm takes particle swarm search direction estimation mechanism and harmony search (HS) approach to particle swarm optimization (PSO) algorithm, which increases the search capability of PSO algorithm considerably. The proposed algorithm initializes a new search with harmony pitch adjusting or random selection when PSO search direction is estimated incorrectly. This can provide further opportunities of finding better solutions for the particle swarm by guiding the entire particle swarm to promising new regions of the search space and accelerating the search. PSO, HPSO and IHPSO, as well as other advanced PSO procedures from the literature were compared on several benchmark test functions extensively. Statistical analyses of the experimental results indicate that the performance of IHPSO is better than the performance of PSO and HPSO.

Collaborative beamforming in wireless sensor networks using a novel particle swarm optimization algorithm variant

Particle swarm optimization (PSO) algorithm is generally improved by adaptively adjusting the inertia weight or combining with other evolution algorithms. However, in most modified PSO algorithms, the random values are always generated by uniform distribution in the range of [0, 1]. In this study, the random values, which are generated by uniform distribution in the ranges of [0, 1] and [−1, 1], and Gauss distribution with mean 0 and variance 1 ( U [ 0 , 1 ] , U [ − 1 , 1 ] and G ( 0 , 1 ) ), are respectively used in the standard PSO and linear decreasing inertia weight (LDIW) PSO algorithms. For comparison, the deterministic PSO algorithm, in which the random values are set as 0.5, is also investigated in this study. Some benchmark functions and the pressure vessel design problem are selected to test these algorithms with different types of random values in three space dimensions (10, 30, and 100). The experimental results show that the standard PSO and LDIW-PSO algorithms with random values generated by U [ − 1 , 1 ] or G ( 0 , 1 ) are more likely to avoid falling into local optima and quickly obtain the global optima. This is because the large-scale random values can expand the range of particle velocity to make the particle more likely to escape from local optima and obtain the global optima. Although the random values generated by U [ − 1 , 1 ] or G ( 0 , 1 ) are beneficial to improve the global searching ability, the local searching ability for a low dimensional practical optimization problem may be decreased due to the finite particles.

Improved Adaptive PSO-based Gain Tuning for PID Controllers in Utility Boilers

Job-shop scheduling problem is a NP-hard complete. For some JSSP, even with moderate size, optimality can’t be guaranteed. Particle swarm optimization (PSO) algorithm has been developing rapidly and has been applied widely as it is easily understood and realized. This paper presents an improved particle swarm optimization algorithm (IPSO), which uses the dynamic inertia weight that decreases according iterative generation increasing to improve the performance of standard PSO. The proposed IPSO can be used to solve the traditional JSSP and the computational experiments show that the IPSO algorithm is more effective than GA and standard PSO algorithm for JSSP to minimize makespan.

This paper presents a hybrid approach based discrete Particle Swarm Optimization (PSO) and chaotic strategies for solving multi-objective task scheduling problem in cloud computing. The main purpose is to allocate the summited tasks to the available resources in the cloud environment with minimum makespan (i.e. schedule length) and processing cost while maximizing resource utilization without violating Service Level Agreement (SLA) among users and cloud providers. The main challenges faced by Particle Swarm Optimization (PSO) when used to solve scheduling problems are premature convergence and trapping into local optimum. This paper presents an enhanced Particle Swarm Optimization algorithm hybridized with Chaotic Map strategies. The proposed approach is called Enhanced Particle Swarm Optimization based Chaotic Strategies (EPSOCHO) algorithm. Our proposed approach suggests two Chaotic Map strategies: sinusoidal iterator and Lorenz attractor to enhanced PSO algorithm in order to get good convergence and diversity for optimizing the task scheduling in cloud computing. The proposed approach is simulated and implemented in Cloudsim simulator. The performance of the proposed approach is compared with the standard PSO algorithm, the improved PSO algorithm with Longest job to fastest processor (LJFP-PSO), and the improved PSO algorithm with minimum completion time (MCT-PSO) using different sizes of tasks and various benchmark datasets. The results clearly demonstrate the efficiency of the proposed approach in terms of makespan, processing cost and resources utilization.

The particle swarm optimization (PSO) algorithm is an intelligent optimization algorithm and has been successfully applied to many fields. However, it has the deficiencies of the poor search capability and the low calculation efficiency. To solve the problems, the genetic algorithm is introduced to improve the PSO algorithm in the paper. Then, three simulated examples were used to assess the ability of the improved PSO algorithm. The results showed that the improved PSO algorithm could jump out of the local minimum and achieve the better solution. Furthermore, the paper reveals that the improved PSO algorithm seems to be an improvement on the original PSO algorithm.

An improved chaos particle swarm optimization (CPSO) algorithm is proposed on path planning for unmanned aerial vehicle (UAV) to overcome the inadequacy of particle swarm optimization (PSO) algorithm, which falls into local optimum easily and converges slowly in process with poor precision. Through the in-depth analysis of PSO algorithm, the chaos optimization (CO) algorithm principle is introduced into it based on the traditional update operations on the particles’ velocity and position; as a result, the diversity of particles is increased, the suboptimal search on path planning is avoided and the quickness accompanied with accuracy of convergence is improved. Combined with digital map for modeling the UAV’s flight environment, the 3-D path planning is achieved. As the simulation results demonstrated, this hybrid algorithm is superior to the traditional PSO algorithm on path searching, especially in the 3-D environment.

Ultra-high performance concrete has excellent mechanical properties such as ultra-high strength and high durability, and has a broad application prospect in the field of bridge engineering. To make full use of the superior mechanical properties of UHPC and reduce the cost of the bridge, the particle swarm optimization algorithm is used to optimize the structural design of the UHPC beam bridge; Aiming at the problem that the traditional particle swarm optimization algorithm is easy to fall into local optimum, the nonlinear adaptive weight update method is used to improve the particle swarm optimization algorithm. Based on the above-mentioned improved particle swarm optimization algorithm, the optimal design method of ordinary reinforced UHPC beams and prestressed UHPC beams with commonly used highway spans is studied. The reliability of the optimized structural limit state is analyzed by Monte Carlo (MC) importance sampling method. The results show that compared with the traditional particle swarm optimization algorithm, the improved particle swarm optimization algorithm has higher convergence speed and convergence accuracy. The optimal height-span ratio of ordinary reinforced UHPC beams decreases with the increase of the span, and the construction cost gradually increases; The optimal height-span ratio of the prestressed beam decreases first and then increases with the increase of the span, and the construction cost gradually increases. The calculation results of load capacity reliability indexes of optimization results are all higher than the target reliability indexes of similar components stipulated in China’s “Uniform Standard for Structural Reliability Design of Highway Engineering”.