Automatic modulation classification using KELM with joint features of CNN and LBP

Accurately identifying epileptogenic zone (EZ) using high-frequency oscillations (HFOs) is a challenge that must be mastered to transfer HFOs into clinical use. We analyzed the ability of a convolutional neural network (CNN) model to distinguish EZ and non-EZ HFOs. Nineteen medically intractable epilepsy patients with good surgical outcomes 2 years after surgery were studied. Five-minute interictal intracranial electroencephalogram epochs of slow-wave sleep were selected randomly. Then 5 s segments of ripples (80–200 Hz) and fast ripples (FRs, 200–500 Hz) were detected automatically. The EZs and non-EZs were identified using the surgery resection range. We innovatively converted all epochs into four types of images using two scales: original waveforms, filtered waveforms, wavelet spectrum images, and smoothed pseudo Wigner–Ville distribution (SPWVD) spectrum images. Two scales were fixed and fitted scales. We then used a CNN model to classify the HFOs into EZ and non-EZ categories. As a result, 7,000 epochs of ripples and 2,000 epochs of FRs were randomly selected from the EZ and non-EZ data for analysis. Our CNN model can distinguish EZ and non-EZ HFOs successfully. Except for original ripple waveforms, the results from CNN models that are trained using fixed-scale images are significantly better than those from models trained using fitted-scale images (p < 0.05). Of the four fixed-scale transformations, the CNN based on the adjusted SPWVD (ASPWVD) produced the best accuracies (80.89 ± 1.43% and 77.85 ± 1.61% for ripples and FRs, respectively, p < 0.05). The CNN using ASPWVD transformation images is an effective deep learning method that can be used to classify EZ and non-EZ HFOs.

Automatic modulation classification (AMC) plays an important role in many fields to identify the modulation type of wireless signals. In this paper, we introduce deep learning to signal recognition. Based on architecture analysis of the convolutional neural network (CNN), we used real signal data generated by instruments as dataset, and proposed an improved CNN architecture to achieve compatible recognition accuracy of modulation classification. According to various conditions of signal noise ratio (SNR), we test the proposed CNN architecture with the real sampled signals. Experiments results show that the high-layer network is not necessary for modulation recognition with high SNR signals. The proposed CNN architecture has higher average classification accuracy than RESNET and is more compatible for modulation classification of signals with lower SNR.

The Internet of Things (IoT) permeates every aspect of our daily lives as billions of interconnected devices are deployed in the physical world. However, IoT networks operate in an untrusted environment and often suffer from many malicious active attacks. Automatic modulation classification (AMC), which can identify the modulation format of intercepted signals without prior knowledge, is a vital technology in countering physical-layer threats of IoT. However, most of the existing algorithms assume the channel is time invariant, and the AMC in time-varying channels is not been well studied. To deal with this dilemma, a novel AMC algorithm MCBLDN consisting of multiple convolutional neural networks (CNNs), a bidirectional long short-term memory network (BLSTM), and a deep neural network (DNN) is proposed. In MCBLDN, a multislot constellation diagram (CD) method is proposed to extract time-evolution characteristics for generating more discriminative features. Specifically, different grayscale subimages generated by slotted CDs are processed serially by their respective CNNs. Therefore, MCBLDN is overparameterized and time consuming. In addition, the frequency offset and phase offset caused by time-varying channels are neglected in MCBLDN, which is detrimental to the performance of AMC. To address the mentioned disadvantages, a lightweight MCBLDN with a spatial transformer network (SLCBDN) is proposed. First, the multiple CNNs in MCBLDN are pruned into a lightweight classification model, and the input data are rearranged to facilitate parallel processing by the lightweight CNN. Additionally, the spatial transformer network (STN) is utilized to reduce the influence of frequency offset and phase offset. Numerical results verify that the proposed method achieves superior performance and higher speed compared to the baseline algorithm MCBLDN.

This article focuses on automatic modulation classification (AMC) in wireless communication systems. A convolutional neural network (CNN) with three layers is introduced for the AMC process. Over degraded channels, it is assumed that the constellation diagrams of received signals do not show sharp points as in the case of pure signals. Instead, the points spread to constitute circle‐shaped objects. With more deterioration in channel conditions, these circle‐shaped objects begin to show overlapping. This behavior motivates us to use object detection, when dealing with the modulation classification task. The selection of the adopted transforms in this article is made from the object detection perspective. Different 2D transforms are considered on the constellation diagrams and compared for better classification performance. These transforms are the Radon transform (RT), the curvelet transform, and the phase congruency (PC). They are applied on the 2D constellation diagrams prior to the classification task with the CNN. The classification of the modulation format at different signal‐to‐noise ratios (SNRs) is considered in this article from the constellation diagrams, and the preprocessed constellation diagrams using RT, curvelet transform, and PC. Seven types of modulation formats are considered in this study to represent both spread and dense constellation diagram patterns, and the study extends from −10 to 10 dB. Analysis of the results indicating the most suitable preprocessor according to the constellation type and the SNR involved is provided.

Real-time modulation classification architecture in software defined radio

Cognitive Radio (CR) systems allow optimizing the use of the shared radio spectrum and enhancing the coexistence among different technologies by efficiently changing certain operating parameters of the radios such as transmit-power, carrier frequency, and modulation and coding scheme in real-time. Dynamic Spectrum Access (DSA), which allows radios to dynamically access and use the unused spectrum, is one of the tasks that are fundamental for a better use of the spectrum. In this paper, we extend the previous work on Automatic Modulation Classification (AMC) by using Deep Neural Network (DNNs) and evaluate the performance of these architectures on signals that are not only modulated but are also encoded. We call this the Automatic Modulation and Coding Scheme Classification problem, or \(AMC^2\). In this problem, radio signals are classified according to the Modulation and Coding Scheme (MCS) used during their transmission. Evaluations on a data set of 802.11 radio signals, transmitted with different MCS and Signal to Noise Ratio (SNR), provide important results on the impact of some DNN hyperparameters, e.g. number of layers, batch size, etc., in the classification accuracy.

In this paper, a convolutional neural network (CNN) model, named DFENet, is composed of multi-branch blocks for diverse feature extraction (DFE) to improve the accuracy of automatic modulation classification (AMC) in wireless communication systems. The DFE blocks primarily involve advanced processing sub-blocks designed to extract signal features from IQ (In-phase and Quadrature-phase) data using filters at multiple scales. By extracting diverse intrinsic features, the convolutional layers with different filter sizes can prevent overfitting and gradient vanishing problems, thus enhancing the AMC accuracy while maintaining reasonable computational complexity. Experimental results with the HisarMod2019 dataset demonstrate that the DFENet model with 4 DFE blocks and 128 filters in the convolutional layers achieved an average AMC accuracy of 82.76%, excelling particularly at low SNR levels, with an accuracy exceeding 60% at SNR = -20 dB and greater than 90% at SNR = -2 dB. For the RadioML2018.01A dataset, the proposed model yielded an accuracy of AMC greater than 93% for SNR >6 dB. In comparison, our model outperforms other state-of-the-art models in terms of accuracy while maintaining reasonable computational complexity and fast execution time.

Automatic modulation classification (AMC) of received unknown signals is critical in modern communication systems, enabling intelligent signal interception and spectrum management. In this paper, we propose a wavelet-based spectrum convolutional neural network (WS-CNN) model that integrates signal processing techniques with deep learning to achieve robust classification under challenging conditions, including noise, fading, and Doppler effects. The WS-CNN model is based on wavelet analysis and a convolutional neural network (CNN). Specifically, the proposed wavelet analysis, including wavelet threshold denoising, median filtering, and continuous wavelet transformation, is used for signal preprocessing to extract features and generate a compact 2D diagram. The 2D diagram is subsequently fed into the CNN for classification. The simulation results show that the proposed WS-CNN model achieves higher classification rates across a wide range of signal-to-noise ratios (SNRs) compared with existing methods.

Automatic modulation classification (AMC) has a wide range of applications in both civilian and military fields, such as industrial Internet of Things (IIoT) security, communication spectrum management, and military electronic countermeasures. However, label mislabeling often occurs in practical scenarios, significantly impacting the performance and robustness of deep neural networks (DNNs). In this article, we propose a meta-learning guided label noise distillation method to enhance the robustness of AMC models against label noise or errors. Specifically, we propose a teacher-student heterogeneous network (TSHN) to discriminate and distill label noise. Following the notion that labels represent information, a teacher network, utilizing trusted few-shot labeled samples, reevaluates and corrects labels for a considerable number of untrusted labeled samples through meta-learning. By dividing and conquering untrusted labeled samples according to their confidence levels, the student network learns more effectively. Additionally, we propose a multiview signal (MVS) method to further enhance the performance of hard-to-classify categories with few-shot trusted labeled samples. Extensive experiments on the RadioML2016 and HisarMod2019.1 data sets demonstrate that our methods significantly improve accuracy and robustness in signal AMC across diverse label noise scenarios, including symmetric, asymmetric, and mixed label noise. For example, compared to the baseline convolutional neural network with the cross-entropy loss, our proposed TSHN achieves a remarkable 1.26% to 36.84% accuracy improvement under symmetric label noise and 0.12% to 38.59% accuracy improvement under mixed label noise. Moreover, TSHN exhibits greater robustness to varying label noise rates compared to existing methods.

Automatic modulation classification (AMC) of underwater acoustic communication signals is of great significance in national defense and marine military. Accurate modulation classification methods can make great contributions to accurately grasping the parameters and characteristics of enemy communication systems. While a poor underwater acoustic channel makes it difficult to classify the modulation types correctly. Feature extraction and deep learning methods have proven to be effective methods for the modulation classification of underwater acoustic communication signals, but their performance is still limited by the complex underwater communication environment. Graph convolution networks (GCN) can learn the graph structured information of the data, making it an effective method for processing structured data. To improve the stability and robustness of AMC in underwater channels, we combined the feature extraction and deep learning methods by fusing the multi-domain features and deep features using GCN. The proposed method takes the relationships among the different multi-domain features and deep features into account. Firstly, a feature graph was built using the properties of the features. Secondly, multi-domain features were extracted from the received signals and deep features were extracted from the signals using a deep neural network. Thirdly, we constructed the input of GCN using these features and the graph. Then, the multi-domain features and deep features were fused by the GCN. Finally, we classified the modulation types using the output of GCN by way of a softmax layer. We conducted the experiments on a simulated dataset and a real-world dataset, respectively. The results show that the AMC based on GCN can achieve a significant improvement in performance compared to the current state-of-the-art methods. Our approach is robust in underwater acoustic channels.

Understanding the learning mechanism of convolutional neural networks in spectral analysis

The Automatic Modulation Classification (AMC) of the underwater acoustic communication signals is still difficult via traditional methods in the case of poor underwater acoustic channels condition and impulse noise. In this paper, we propose a novel deep neural network model for AMC of underwater acoustic communication combining the convolutional neural network (CNN) and the long short-term memory network (LSTM). The CNN learns from time domain IQ data and LSTM learns from amplitude and phase. Multipath fading underwater acoustic channels with alpha-stable impulse noise and doppler frequency shift are modeled for signal dataset generation based on the real marine environment data. Experimental results validate this approach has a high recognition rate with the burst low SNR signal and has a performance stability under the Alpha-stable impulse noise, which is better compared to other existing schemes.

Among the many deep learning methods, the convolutional neural network (CNN) model has an excellent performance in image recognition. Research on identifying and classifying image datasets using CNN is ongoing. Animal species recognition and classification with CNN is expected to be helpful for various applications. However, sophisticated feature recognition is essential to classify quasi-species with similar features, such as the quasi-species of parrots that have a high color similarity. The purpose of this study is to develop a vision-based mobile application to classify endangered parrot species using an advanced CNN model based on transfer learning (some parrots have quite similar colors and shapes). We acquired the images in two ways: collecting them directly from the Seoul Grand Park Zoo and crawling them using the Google search. Subsequently, we have built advanced CNN models with transfer learning and trained them using the data. Next, we converted one of the fully trained models into a file for execution on mobile devices and created the Android package files. The accuracy was measured for each of the eight CNN models. The overall accuracy for the camera of the mobile device was 94.125%. For certain species, the accuracy of recognition was 100%, with the required time of only 455 ms. Our approach helps to recognize the species in real time using the camera of the mobile device. Applications will be helpful for the prevention of smuggling of endangered species in the customs clearance area.

Non-orthogonal multiple access (NOMA) is a promising solution to the problem of spectrum deficiency. NOMA receivers require information about the modulation type of the co-scheduled user's signal to perform successive interference cancellation (SIC). Automatic modulation classification (AMC) is used to reduce the signal overhead created due to sharing of this information. In this paper, a convolutional neural network (CNN) with a modified residual block (MR-CNN) is proposed for AMC in NOMA systems. The classification performance of MR-CNN is evaluated on the input signal with four different modulation formats at varying signal to noise ratios (SNRs). Experimental results demonstrate the proposed model can achieve more than 90% classification accuracy for SNRs higher than 10dB. Further, comparative analysis depicts that the proposed model outperforms existing methods in terms of classification accuracy at low SNRs and has similar performance at high SNRs.

Distinguishing pericarpium citri reticulatae of different origins using terahertz time-domain spectroscopy combined with convolutional neural networks