Average-Case Performance Analysis of a 2D Strip Packing Algorithm?NFDH

We consider the two-dimensional bin packing and strip packing problem, where a list of rectangles has to be packed into a minimal number of rectangular bins or a strip of minimal height, respectively. All packings have to be non-overlapping and orthogonal, i.e., axis-parallel. Our algorithm for strip packing has an absolute approximation ratio of 1.9396 and is the first algorithm to break the approximation ratio of 2 which was established more than a decade ago. Moreover, we present a polynomial time approximation scheme ($\mathcal{PTAS}$) for strip packing where rotations by 90 degrees are permitted and an algorithm for two-dimensional bin packing with an absolute worst-case ratio of 2, which is optimal provided $\mathcal{P} \not= \mathcal{NP}$.

\nStrip packing is a well-known NP-hard problem and it was widely applied in engineering fields. This paper considers a two-dimensional orthogonal strip packing problem. Until now some exact algorithm and mainly heuristics were proposed for two-dimensional orthogonal strip packing problem. While this paper proposes a two-stage hybrid algorithm for it. In the first stage, a heuristic algorithm based on layering idea is developed to construct a solution. In the second stage, a great deluge algorithm is used to further search a better solution. Computational results on several classes of benchmark problems have revealed that the hybrid algorithm improves the results of layer-heuristic, and can compete with other heuristics from the literature.\n

We study the well-known two-dimensional strip packing problem. Given is a set of rectangular axis-parallel items and a strip of width W with infinite height. The objective is to find a packing of these items into the strip, which minimizes the packing height. Lately, it has been shown that the lower bound of 3/2 of the absolute approximation ratio can be beaten when we allow a pseudo-polynomial running-time of type \((n W)^{f(1/\varepsilon )}\), for any function f. If W is polynomially bounded by the number of items, this is a polynomial running-time. We present a pseudo-polynomial algorithm with approximation ratio \(4/3 +\varepsilon \) and running time \((n W)^{1/\varepsilon ^{\mathcal {O}(2^{1/\varepsilon })}}\).

The study on one-dimensional bin packing problem may bring about many important applications such as multiprocessor scheduling, resource allocating, real-world planning and packing. Harmonic algorithms (including H K, RH, etc.) for bin packing have been famous for their linear-time and on-line properties for a long time. This paper profoundly analyzes the average-case performance of harmonic algorithms for pieces of i.i.d. sizes, provides the average-case performance ratio of H K under (0,d] (d ≤ 1) uniform distribution and the average-case performance ratio of RH under (0,1] uniform distribution. We also finished the discussion of the worst-case performance ratio of RH. Moreover, we propose a new improved version of RH that obtains better worst- and average-case performance ratios.

Two-dimensional packing problems are a fundamental class of optimization problems and Strip Packing is one of the most natural and famous among them. Indeed it can be defined in just one sentence: Given a set of rectangular axis parallel items and a strip with bounded width and infinite height, the objective is to find a packing of the items into the strip minimizing the packing height. We speak of pseudo-polynomial Strip Packing if we consider algorithms with pseudo-polynomial running time with respect to the width of the strip. It is known that there is no pseudo-polynomial time algorithm for Strip Packing with a ratio better than 5/4 unless P = NP. The best algorithm so far has a ratio of 4/3 + epsilon. In this paper, we close the gap between inapproximability result and currently known algorithms by presenting an algorithm with approximation ratio 5/4 + epsilon. The algorithm relies on a new structural result which is the main accomplishment of this paper. It states that each optimal solution can be transformed with bounded loss in the objective such that it has one of a polynomial number of different forms thus making the problem tractable by standard techniques, i.e., dynamic programming. To show the conceptual strength of the approach, we extend our result to other problems as well, e.g., Strip Packing with 90 degree rotations and Contiguous Moldable Task Scheduling, and present algorithms with approximation ratio 5/4 + epsilon for these problems as well.

Approximation and online algorithms for multidimensional bin packing: A survey

A genetic algorithm for the two-dimensional strip packing problem with rectangular pieces

Scheduling parallel jobs on heterogeneous platforms

New and improved level heuristics for the rectangular strip packing and variable-sized bin packing problems

In the three-dimensional (3D) strip packing problem, we are given a set of 3D rectangular items and a 3D box $B$. The goal is to pack all the items in $B$ such that the height of the packing is minimized. We consider the most basic version of the problem, where the items must be packed with their edges parallel to the edges of $B$ and cannot be rotated. Building upon Caprara's work for the two-dimensional (2D) bin packing problem, we obtain an algorithm that, given any $\epsilon>0$, achieves an approximation of $T_{\infty}+\epsilon\approx1.69103+\epsilon$, where $T_{\infty}$ is the well-known number that occurs naturally in the context of bin packing. Our key idea is to establish a connection between bin packing solutions for an arbitrary instance $I$ and the strip packing solutions for the corresponding instance obtained from $I$ by applying the harmonic transformation to certain dimensions. Based on this connection, we also give a simple alternate proof of the $T_{\infty}+\epsilon$ approximation for 2D bin packing due to Caprara. In particular, we show how his result follows from a simple modification of the asymptotic approximation scheme for 2D strip packing due to Kenyon and Rémila.

We study the strip packing problem, a classical packing problem which generalizes both bin packing and makespan minimization. Here we are given a set of axis-parallel rectangles in the two-dimensional plane and the goal is to pack them in a vertical strip of fixed width such that the height of the obtained packing is minimized. The packing must be non-overlapping and the rectangles cannot be rotated. A reduction from the partition problem shows that no approximation better than 3/2 is possible for strip packing in polynomial time (assuming P!=NP). Nadiradze and Wiese [SODA16] overcame this barrier by presenting a (7/5+epsilon)-approximation algorithm in pseudo-polynomial-time (PPT). As the problem is strongly NP-hard, it does not admit an exact PPT algorithm (though a PPT approximation scheme might exist). In this paper we make further progress on the PPT approximability of strip packing, by presenting a (4/3+epsilon)-approximation algorithm. Our result is based on a non-trivial repacking of some rectangles in the empty space left by the construction by Nadiradze and Wiese, and in some sense pushes their approach to its limit. Our PPT algorithm can be adapted to the case where we are allowed to rotate the rectangles by 90 degrees, achieving the same approximation factor and breaking the polynomial-time approximation barrier of 3/2 for the case with rotations as well.

We study the two-dimensional bin packing problem with and without rotations. Here we are given a set of two-dimensional rectangular items I and the goal is to pack these into a minimum number of unit square bins. We consider the orthogonal packing case where the edges of the items must be aligned parallel to the edges of the bin. Our main result is a 1.405-approximation for two-dimensional bin packing with and without rotation, which improves upon a recent 1.5 approximation due to Jansen and Pradel. We also show that a wide class of rounding based algorithms cannot improve upon the factor of 1.5.

The rectangular two-dimensional strip packing problem real-life practical constraints: A bibliometric overview

This article addresses several variants of the two-dimensional bin packing problem. In the most basic version of the problem it is intended to pack a given number of rectangular items with given sizes in rectangular bins in such a way that the number of bins used is minimized. Different heuristic approaches (greedy, local search, and variable neighbourhood descent) are proposed for solving four guillotine two-dimensional bin packing problems. The heuristics are based on the definition of a packing sequence for items and in a set of criteria for packing one item in a current partial solution. Several extensions are introduced to deal with issues pointed out by two furniture companies. Extensive computational results on instances from the literature and from the two furniture companies are reported and compared with optimal solutions, solutions from other five (meta)heuristics and, for a small set of instances, with the ones used in the companies.

Since the seminal work of Ford and Fulkerson in the 1950s, network flow theory is one of the most important and most active areas of research in combinatorial optimization. Coming from the classical maximum flow problem, we introduce and study an apparently basic but new flow problem that features a couple of interesting peculiarities. We derive several results on the complexity and approximability of the new problem. On the way we also discover two closely related basic covering and packing problems that are of independent interest.Starting from an LP formulation of the maximum s-t-flow problem in path variables, we introduce unit upper bounds on the amount of flow being sent along each path. The resulting (fractional) flow problem is NP-hard; its integral version is strongly NP-hard already on very simple classes of graphs. For the fractional problem we present an FPTAS that is based on solving the k shortest paths problem iteratively. We show that the integral problem is hard to approximate and give an interesting O(logm)-approximation algorithm, where m is the number of arcs in the considered graph. For the multicommodity version of the problem there is an \(O(\sqrt{m})\)-approximation algorithm. We argue that this performance guarantee is best possible, unless P=NP.