Axicon-based Bessel beams for flat-field illumination in total internal reflection fluorescence microscopy.

Total internal reflection fluorescence (TIRF) microscopy (TIRFM) is an elegant optical technique that provides for the excitation of fluorophores in an extremely thin axial region ("optical section"). The method is based on the principle that when excitation light is totally internally reflected in a transparent solid (e.g., coverglass) at its interface with liquid, an electromagnetic field, called the evanescent wave, is generated in the liquid at the solid-liquid interface and is the same frequency as the excitation light. Since the intensity of the evanescent wave exponentially decays with distance from the surface of the solid, only fluorescent molecules within a few hundred nanometers of the solid are efficiently excited. This unit will briefly review the history, optical theory, and different hardware configurations used in TIRFM. In addition, it will provide experimental details and methodological considerations for studying receptors at the plasma membrane in neurons.

Total internal reflection fluorescence (TIRF) microscopy has gained popularity in recent years among cell biologists due to its ability to clearly visualize events that occur at the adherent plasma membrane of cells. TIRF microscopy systems are now commercially available from nearly all microscope suppliers. This review aims to give the reader an introduction to the physical basis of TIRF and considerations that need to be made when purchasing a commercial system. We explain how TIRF can be combined with other microscopy modalities and describe how to use TIRF to study processes such as endocytosis, exocytosis, and focal adhesion dynamics. Finally, we provide a step-by-step guide to imaging and analyzing focal adhesion dynamics in a migrating cell using TIRF microscopy.

Single molecule detection and fluorescence correlation spectroscopy on surfaces

The selective microscopic imaging of the plasma membrane and adjacent structures by total internal reflection fluorescence (TIRF) microscopy is a versatile and frequently used technique in cell biology. A reduction of imaging artifacts in objective-type TIRF microscopy can be achieved by circular or multi-spot laser illumination or by using noncoherent light sources that are projected into the back focal plane as a light annulus. Light-emitting diode (LED)-based TIRF excitation is a recent advancement of the latter strategy. While some basic principles of LED-TIRF remain the same as in laser-based methods, the calculation of penetration depth, the flatness of illumination and the amount of available illumination power differ. This study provides the theoretical framework for the construction and adjustment of LED-TIRF. Using state-of-the art high power LED emitters, LED-TIRF achieves excitation efficiencies that are comparable to laser-based systems and homogenously illuminate the entire field of view, thus, allowing variation of the penetration depth or quantitative photobleaching-assisted imaging protocols. Using autofluorescent transmembrane, soluble and membrane-attached fusion proteins, we provide examples for a photobleaching-based assessment of the exchange kinetics of proteins within living human endothelial cells.

1] Total internal reflection fluorescence microscopy in cell biology

Since its invention in the mid of eighties (1) Total Internal Reflection Microscopy (TIRM) has proven to be an effective technique to measure weak interactions between spherical colloidal particles and surfaces with a resolution of a few femtonewton. It is a single particle evanescent light scattering technique. In an experimental setup a laser beam is coupled into a prism and hits the glass-water interface with an angle slightly above the critical angle of total internal reflection. This generates an evanescent field near the interface that decays in the lower refractive index medium (water) with a characteristic penetration depth which depends on the angle of incidence. A colloidal particle that is dispersed in the medium will scatter light from the evanescent wave if it is in the vicinity of the surface. By registering a scattered intensity it is possible to deduce the particle- substrate distance. Compared to other methods for measure particle wall interactions like the surface force apparatus or the atomic force microscopy where a colloidal particle is attached to the tip, TIRM is the most sensitive technique because thermal fluctuations where limit the other methods in their resolution are exploited to determine the interaction potential. In this way forces in the order of a few femtonewton can be detected. TIRM has proven to be a valuable tool for the precise measurement of weak colloidal interactions as double layer forces, van der Waals forces, magnetic interactions and depletion forces. Review on TIRM can be found for example in (2,3). To compare experimental results with results of mathematical modeling an effective light scattering method is needed. For this purpose the Discrete Sources Method (DSM) has been chosen. The DSM is a well-known method for light scattering analysis, which has recently been applied for evanescent wave scattering (4). 1. Discrete Sources Method For the theoretical modeling the Discrete Sources Method (DSM) has been chosen. The DSM is a well-known method for the analysis of light scattering. It has recently been applied to the evanescent wave scattering (4). In frame of the DSM the mathematical statement can be presented as follows:

In Alzheimer disease, amyloid beta, a 39-43-residue peptide produced by cleavage from a large amyloid precursor protein, undergoes conformational change to form amyloid fibrils and deposits as senile amyloid plaques in the extracellular cerebral cortices of the brain. However, the mechanism of how the intrinsically linear amyloid fibrils form spherical senile plaques is unknown. With total internal reflection fluorescence microscopy combined with the use of thioflavin T, an amyloid-specific fluorescence dye, we succeeded in observing the formation of the senile plaque-like spherulitic structures with diameters of around 15 microm on the chemically modified quartz surface. Real-time observation at a single fibrillar level revealed that, in the absence of tight contact with the surface, the cooperative and radial growth of amyloid fibrils from the core leads to a huge spherulitic structure. The results suggest the underlying physicochemical mechanism of senile plaque formation, essential for obtaining insight into prevention of Alzheimer disease.

TIRF Microscopy Studies of Axial Protein Organization using Photoswitchable Fluorescent Proteins

Single particle orientation and rotational tracking (SPORT) has recently become a powerful optical microscopy tool that can expose many molecular motions. Unfortunately, there is not yet a single microscopy technique that can decipher all particle motions in all environmental conditions, thus there are limitations to current technologies. Within, the two powerful microscopy tools of total internal reflection and interferometry are advanced to determine the position, orientation, and optical properties of metallic nanoparticles in a variety of environments. Total internal reflection is an optical phenomenon that has been applied to microscopy to produce either fluorescent or scattered light. The non-invasive far-field imaging technique is coupled with a near-field illumination scheme that allows for better axial resolution than confocal microscopy and epi-fluorescence microscopy. By controlling the incident illumination angle using total internal reflection fluorescence (TIRF) microscopy, a new type of imaging probe called “non-blinking” quantum dots (NBQDs) were super-localized in the axial direction to sub-10-nm precision. These particles were also used to study the rotational motion of microtubules being propelled by the motor protein kinesin across the substrate surface. The same instrument was modified to function under total internal reflection scattering (TIRS) microscopy to study metallic anisotropic nanoparticles and their dynamic interactions with synthetic lipid bilayers. Utilizing two illumination lasers with opposite polarization directions at wavelengths corresponding to the short and long axis surface plasmon resonance (SPR) of the nanoparticles, both the in-plane and out-of-plane movements of many particles could be tracked simultaneously. When combined with Gaussian point spread function (PSF) fitting for particle super-localization, the binding status and rotational movement could be resolved without degeneracy. TIRS microscopy was also used to find the 3D orientation of stationary metallic anisotropic nanoparticles utilizing only long-axis SPR enhancement. The polarization direction of the illuminating light was rotated causing the relative intensity of p-polarized and s-polarized light within the evanescent field to change. The interaction of the evanescent field with the particles is dependent on the orientation of the particle producing an intensity curve. This curve and the in-plane angle can be compared with simulations to accurately determine the 3D orientation. Differential interference contrast (DIC) microscopy is another non-invasive far-field technique based upon interferometry that does not rely on staining or other contrast enhancing techniques. In addition, high numerical aperture condensers and objectives can be used to give a very narrow depth of field allowing for the optical tomography of samples, which makes it an ideal candidate to study biological systems. DIC microscopy has also proven itself in determining the orientation of gold nanorods in both engineered environments and within cells. Many types of nanoparticles and nanostructures have been synthesized using lithographic techniques on silicon wafer substrates. Traditionally, reflective mode DIC microscopes have been developed and applied to the topographical study of reflective substrates and the imaging of chips on silicon wafers. Herein, a laser-illuminated reflected-mode DIC was developed for studying nanoparticles on reflective surfaces.

A major waste byproduct of oil sands in situ extraction is oil sands tailings, which are a mixture of water, clay, and residual bitumen. These tailings represent a huge ecological footprint in the form of tailings ponds, which not only render large land areas unusable but also prevent reuse of water. The slow dewatering of the tailings ponds poses a major challenge to the industry. The presence of complex inorganic–organic bitumen–clay mixtures in these tailings contributes to this problem. Hence, understanding the nature of the bitumen–clay association and the effect of bitumen on clay particle–particle interactions is important for the development of more effective chemicals or processes to accelerate particle aggregation and sedimentation during dewatering. Previous studies that investigate these interactions used techniques that are sensitive only toward inorganic clay but not sensitive towards organic bitumen. Here, we use a high-resolution total internal reflection fluorescence (TIRF) microscopy to ...

Imaging GPCRs trafficking and signaling with total internal reflection fluorescence microscopy in cultured neurons.

Total internal reflection fluorescence (TIRF) microscopy, used in conjunction with flash photolysis, provides a useful way of investigating the kinetics of macromolecular interactions. We compare different TIRF optical geometries to establish an optimal combination. Excitation light was introduced via four different arrangements: (1) a prism positioned on the microscope optical axis, (2) an offset prism with propagation through a silica slide trans to the objective lens, (3) an offset prism with propagation through a silica coverslip cis to a water-immersion objective lens and (4) a prismless arrangement using a high NA oil-immersion objective lens. Photolysis was achieved using a Xe flash lamp and a customised silica condenser lens. Single myosin molecules labelled with a Cy3 fluorophore were used as a test sample. Although the offset trans prism gave the best signal-to-background ratio, a customised thin rhombic prism incorporated, on axis, into the flash condenser assembly was almost as good and was more practical for scanning multiple fields. An oil-immersion lens gave the brightest image for sample depths < 30 micrometer but above this limit, a water-immersion lens was better. The prismless arrangement may offer advantages in other situations but it is important to check the actual numerical aperture of the objective lens.

Quantifying submillimeter flows using optical diagnostic techniques is often limited by a lack of spatial resolution and optical access. This review discusses two super-resolution imaging techniques, structured illumination microscopy and total internal reflection fluorescence or microscopy, which can visualize bulk and interfacial flows, respectively, at spatial resolutions below the classic diffraction limits. First, we discuss the theory and applications of structured illumination for optical sectioning, i.e., imaging a thin slice of a flow illuminated over its entire volume. Structured illumination can be used to visualize the interior of multiphase flows such as sprays by greatly reducing secondary scattering. Second, the theory underlying evanescent waves is introduced, followed by a review of how total internal reflection microscopy has been used to visualize interfacial flows over the last 15 years. Both techniques, which are starting to be used in fluid mechanics, could significantly improve quantitative imaging of microscale and macroscale flows.

Alexa Fluor 647 is a widely used fluorescent probe for cell bioimaging and super-resolution microscopy. Herein, the reversible fluorescence switching of Alexa Fluor 647 conjugated to bovine serum albumin (BSA) and adsorbed onto indium tin oxide (ITO) electrodes under electrochemical potential control at the level of single protein molecules is reported. The modulation of the fluorescence as a function of potential was observed using total internal reflectance fluorescence (TIRF) microscopy. The fluorescence intensity of the Alexa Fluor 647 decreased, or reached background levels, at reducing potentials but returned to normal levels at oxidizing potentials. These electrochemically induced changes in fluorescence were sensitive to pH despite that BSA-Alexa Fluor 647 fluorescence without applied potential is insensitive to pH between values of 4-10. The observed pH dependence indicated the involvement of electron and proton transfer in the fluorescence switching mechanism.

Contributions of the lower dimer to supramolecular actin patterning revealed by TIRF microscopy.