Bacterial Cellulose-Based Blends and Composites: Versatile Biomaterials for Tissue Engineering Applications.

Surface modification of polymers by plasma treatments for the enhancement of biocompatibility and controlled drug release

In cardiovascular surgery, reconstruction and replacement of cardiac and vascular structures are routinely performed. Prosthetic or biological materials traditionally used for this purpose cannot be considered ideal substitutes as they have limited durability and no growth or regeneration potential. Tissue engineering aims to create materials having normal tissue function including capacity for growth and self-repair. These advanced materials can potentially overcome the shortcomings of conventionally used materials, and, if successfully passing all phases of product development, they might provide a better option for both the pediatric and adult patient population requiring cardiovascular interventions. This short review article overviews the most important cardiovascular pathologies where tissue engineered materials could be used, briefly summarizes the main directions of development of these materials, and discusses the hurdles in their clinical translation. At its beginnings in the 1980s, tissue engineering (TE) was defined as “an interdisciplinary field that applies the principles of engineering and the life sciences toward the development of biological substitutes that restore, maintain, or improve tissue function” (1). Currently, the utility of TE products and materials are being investigated in several fields of human medicine, ranging from orthopedics to cardiovascular surgery (2–5). In cardiovascular surgery, reconstruction and replacement of cardiac and vascular structures are routinely performed. Considering the shortcomings of traditionally used materials, the need for advanced materials that can “restore, maintain or improve tissue function” are evident. Tissue engineered substitutes, having growth and regenerative capacity, could fundamentally change the specialty (6). This article overviews the most important cardiovascular pathologies where TE materials could be used, briefly summarizes the main directions of development of TE materials along with their advantages and shortcomings, and discusses the hurdles in their clinical translation.

Graphene-based materials for tissue engineering

Hyaluronic acid (HA) is a naturally occurring glycosaminoglycan widely recognised for its biocompatibility, biodegradability, and unique viscoelastic properties. Its structural versatility enables the formation of hydrogels with tuneable physicochemical characteristics, making it a valuable biomaterial in drug delivery and regenerative medicine. This review outlines HA properties, gel-forming approaches, and modern medicine and bioengineering applications. It provides a comprehensive overview of advances in HA production strategies, including microbial fermentation, animal tissue extraction, and production in vitro. Particular attention is given to gel-forming mechanisms, emphasising physical and chemical crosslinking methods like carbodiimide crosslinking, radical polymerisation, and enzymatic crosslinking. Advances in HA-based drug delivery systems and applications of HA-based materials in tissue engineering are also discussed, focusing on HA-based hydrogels with conjugates and combinations with compounds like collagen, alginate, and chitosan.

Tissue engineering is a promising approach in replacing or improving tissues lost or has become nonviable due to disease or trauma by the use of scaffold materials by combining engineering and biochemical/physicochemical methods. Its purpose is to create suitable matrices that support cell differentiation and proliferation toward the formation of new and functional tissue.Marine-based natural compounds are potential scaffold feedstock material in tissue engineering owing to their biocompatibility and biodegradability while providing excellent biochemical/physicochemical properties. Numerous application areas and various fabrication routes techniques described in the literature attest to the importance of these materials in tissue regeneration. This review has been carried to merge the information from a large number of studies on the marine-based scaffold materials in tissue engineering into a coherent summary.KeywordsMarineBiomaterial(s)Tissue engineeringScaffold(s)

Nowadays, autologous tissue transplantation represents the gold standard for the reconstruction of large tissue defects. To minimize the resulting donor side morbidity and to overcome the limitations regarding shape and volume of bone grafts research has focused on tissue engineering of axially vascularised tissue constructs. We have evaluated different strategies to improve the vascularisation of bioartificial transplantable tissue volumes. First we used angiogenic growth factors such as VEGF and bFGF in the subcutaneous and arteriovenous loop model in the rat to increase vessel ingrowth. Afterwards we combined the intrinsic vascular pathway of the arteriovenous loop model with an additional extrinsic vessel ingrowth by using a porous titanium chamber. Transplanted cells also showed an increased survival in the AV loop model compared to subcutaneously implanted matrices. In this manuscript we show the evolution of different newly developed methods to improve vascularisation of axially vascularised matrices in tissue engineering.

With the development of tissue engineering, the application of decellularized adipose matrix as scaffold material in tissue engineering has been intensively explored due to its wide source and excellent potential in tissue regeneration. Decellularized adipose matrix is a promising candidate for adipose tissue regeneration, while modification of decellularized adipose matrix scaffold can also allow it to transcend the limitations of adipose tissue source properties and applied to other tissue engineering fields, including cartilage and bone tissue engineering, neural tissue engineering, and skin tissue engineering. In this review, we summarized the development of the applications of decellularized adipose matrix in different tissue engineering and present future perspectives.Level of Evidence III This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Microscopy techniques based on laser-induced nonlinear optical processes allow for chemically specific imaging of unmodified samples at high spatial resolution in three dimensions and provide powerful tools for characterization of tissue-engineering constructs. This is highlighted by the simultaneous imaging of scaffold material, cells, and produced extracellular matrix collagen in samples consisting of osteoprogenitor MC3T3-E1 cells seeded on microporous bacterial cellulose (BC), a potential scaffold material for synthesis of osseous tissue. BC and collagen have been visualized by second harmonic generation (SHG) microscopy, and verification of collagen identification on cellulose scaffolds has been carried out on sectioned samples by comparison with the conventional histological staining technique. Both methods showed similar collagen distributions and a clear increase in the amount of collagen when comparing measurements from two time points during growth. For investigations of intact cellulose scaffolds seeded with cells, SHG was combined with simultaneous coherent anti-Stokes Raman scattering (CARS) microscopy for visualization of cell arrangement in three dimensions and to be correlated with the SHG data. Results showed that the osteoprogenitor cells were able to produce collagen already during the first days of growth. Further on, developed collagen fiber networks could be imaged inside compact regions of cells located in the cellulose micropores. Collagen production, the initial step of tissue mineralization, demonstrates the potential of BC as a scaffold material for bone tissue engineering. Furthermore, the noninvasive in situ monitoring of collagen inside compact tissue clearly manifests the benefits of nonlinear microscopy techniques, such as SHG and CARS, for use in tissue engineering.

Cellulose, the most abundant polymer on Earth, has been widely utilized in its nanoform due to its excellent properties, finding applications across various scientific fields. As the demand for nanocellulose continues to rise and its ease of use becomes apparent, there has been a significant increase in research publications centered on this biomaterial. Nanocellulose, in its different forms, has shown tremendous promise as a tissue engineered scaffold for regeneration and repair. Particularly, nanocellulose-based composites and scaffolds have emerged as highly demanding materials for both soft and hard tissue engineering. Medical practitioners have traditionally relied on collagen and its analogue, gelatin, for treating tissue damage. However, the limited mechanical strength of these biopolymers restricts their direct use in various applications. This issue can be overcome by making hybrids of these biopolymers with nanocellulose. This review presents a comprehensive analysis of the recent and most relevant publications focusing on hybrid composites of collagen and gelatin with a specific emphasis on their combination with nanocellulose. While bone and skin tissue engineering represents two areas where a majority of researchers are concentrating their efforts, this review highlights the use of nanocellulose-based hybrids in these contexts.

A great variety of natural and synthetic polymer materials have been utilized in soft tissue engineering as extracellular matrix (ECM) materials. Natural polymers, such as collagen and fibrin hydrogels, have experienced especially broad adoption due to the high density of cell adhesion sites compared to their synthetic counterparts, ready availability, and ease of use. However, these and other hydrogels lack the structural and mechanical anisotropy that define the ECM in many tissues, such as skeletal and cardiac muscle, tendon, and cartilage. Herein, we present a facile, low-cost, and automated method of preparing collagen microfibers, organizing these fibers into precisely controlled mesh designs, and embedding these meshes in a bulk hydrogel, creating a composite biomaterial suitable for a wide variety of tissue engineering and regenerative medicine applications. With the assistance of custom software tools described herein, mesh patterns are designed by a digital graphical user interface and translated into protocols that are executed by a custom mesh collection and organization device. We demonstrate a high degree of precision and reproducibility in both fiber and mesh fabrication, evaluate single fiber mechanical properties, and provide evidence of collagen self-assembly in the microfibers under standard cell culture conditions. This work offers a powerful, flexible platform for the study of tissue engineering and cell material interactions, as well as the development of therapeutic biomaterials in the form of custom collagen microfiber patterns that will be accessible to all through the methods and techniques described here.Impact StatementCollagen microfiber meshes have immediate and broad applications in tissue engineering research and show high potential for later use in clinical therapeutics due to their compositional similarities to native extracellular matrix and tunable structural and mechanical characteristics. Physical and biological characterizations of these meshes demonstrate physiologically relevant mechanical properties, native-like collagen structure, and cytocompatibility. The methods presented herein not only describe a process through which custom collagen microfiber meshes can be fabricated but also provide the reader with detailed device plans and software tools to produce their own bespoke meshes through a precise, consistent, and automated process.

Although the current medical treatments have been successful in reducing the coronary heart disease related mortality rate, however there still exist various challenges in cardiac tissue engineering due to the hierarchical property of native myocardium and branched structure of blood vessels. The regeneration of progenitor cells, replacement infarcted cardiac tissues and the tissue-engineered constructs are the demand of the current era. In this contrast, 3D printing of scaffold for cardiac tissue engineering plays a crucial role. 3D printing techniques are used to generate patient-specific foundation that mimics the milieu of biological tissue. Various studies are under investigation to regenerate the cardiac tissues. Lack of regeneration capacity is a major hunt in cardiac tissue engineering. This review will provide an overview of 3D bioprinting techniques for cardiovascular tissue engineering. First, it summarises the background about bioprinting (working principles) followed by various bioink materials for cardiac tissue engineering. Recent approaches for the 3D printing of cardiac scaffolds for the regeneration of cardiac tissues are discussed.

As an emerging science, tissue engineering and regenerative medicine focus on developing materials to replace, restore or improve organs or tissues and enhancing the cellular capacity to proliferate, migrate and differentiate into different cell types and specific tissues. Renewable resources have been used to develop new materials, resulting in attempts to produce various environmentally friendly biomaterials. Poly (lactic acid) (PLA) is a biopolymer known to be biodegradable and it is produced from the fermentation of carbohydrates. PLA can be combined with other polymers to produce new biomaterials with suitable physicochemical properties for tissue engineering applications. Here, the advances in modified PLA as tissue engineering materials are discussed in light of its drawbacks, such as biological inertness, low cell adhesion, and low degradation rate, and the efforts conducted to address these challenges toward the design of new enhanced alternative biomaterials.

19 - Chitin biopolymer in tissue engineering

7 - Biopolymer Composites in Field-Effect Transistors

Hydrogels are useful materials as scaffolds for tissue engineering applications. Using hydrogels with additive manufacturing techniques has typically required the addition of techniques such as cross-linking or printing in sacrificial materials that negatively impact tissue growth to remedy inconsistencies in print fidelity. Thus, there is a need for bioinks that can directly print cell-laden constructs. In this study, agarose-based hydrogels commonly used for cartilage tissue engineering were compared to Pluronic, a hydrogel with established printing capabilities. Moreover, new material mixtures were developed for bioprinting by combining alginate and agarose. We compared mechanical and rheological properties, including yield stress, storage modulus, and shear thinning, as well as construct shape fidelity to assess their potential as a bioink for cell-based tissue engineering. The rheological properties and printability of agarose-alginate gels were statistically similar to those of Pluronic for all tests (p > 0.05). Alginate-agarose composites prepared with 5% w/v (3:2 agarose to alginate ratio) demonstrated excellent cell viability over a 28-day culture period (>∼70% cell survival at day 28) as well matrix production over the same period. Therefore, agarose-alginate mixtures showed the greatest potential as an effective bioink for additive manufacturing of biological materials for cartilage tissue engineering.