Behind the cues: A benchmarking study for fake news detection

Electron stopping power (SP) is of great importance in theoretical and applied research areas specifically for Monte Carlo simulation studies in many microanalysis and surface analysis techniques, radiation dosimetry, and the design of particle detectors. However, experimental data are available for a dozen elemental materials only. On the other hand, the Bethe analytical expression of the SP is applicable at high energies only whereas no generally accepted formula exists at lower energies. We employed ensemble machine learning (ML) methods with the available experimental database for the prediction of SPs of electrons with energies from 100 keV down to 1 eV, in elements over the entire periodic table. With a small training database for electron SPs, we applied various algorithms individually as well as their ensembles, which have the credibility to enhance the prediction accuracy in the case of a small training database. Based on the model's performance evaluation tests, we concluded that the stacked generalization is more accurate than the individual algorithms. Using this method, we were able to predict the electron SPs for 54 elements (in total) including 12 elements that were present in the training database as well as for 42 elements beyond the training database over a wide energy range (1 eV to 100 keV). Compared to other theoretical approaches, the ML predicted SPs show very good agreement with the available experimental data at all energies. Moreover, unlike other theoretical approaches, the ML model does not need dielectric function data and other physical parameters which involve complex calculations. Using our ML model, we have predicted SPs for a further 14 elements for which no theoretical SPs are available because of the lack of good dielectric function data.

Magnetic resonance imaging (MRI) is playing an important role in the classification of breast tumors. MRI can be used to obtain multiparametric (mp) information, such as structural, hemodynamic, and physiological information. Quantitative analysis of mp-MRI data has shown potential in improving the accuracy of breast tumor classification. In general, a large set of quantitative and texture features can be generated depending upon the type of methodology used. A suitable combination of selected quantitative and texture features can further improve the accuracy of tumor classification. Machine learning (ML) classifiers based upon features derived from MRI data have shown potential in tumor classification. There is a need for further research studies on selecting an appropriate combination of features and evaluating the performance of different ML classifiers for accurate classification of breast tumors. The objective of the current study was to develop and optimize an ML framework based upon mp-MRI features for the characterization of breast tumors (malignant vs. benign and low- vs. high-grade). This study included the breast mp-MRI data of 60 female patients with histopathology results. A total of 128 features were extracted from the mp-MRI tumor data followed by features selection. Five ML classifiers were evaluated for tumor classification using 10-fold crossvalidation with 10 repetitions. The support vector machine (SVM) classifier based on optimum features selected using a wrapper method with an adaptive boosting (AdaBoost) technique provided the highest sensitivity (0.96 ± 0.03), specificity (0.92 ± 0.09), and accuracy (94% ± 2.91%) in the classification of malignant versus benign tumors. This method also provided the highest sensitivity (0.94 ± 0.07), specificity (0.80 ± 0.05), and accuracy (90% ± 5.48%) in the classification of low- versus high-grade tumors. These findings suggest that the SVM classifier outperformed other ML methods in the binary classification of breast tumors.

Diabetic Retinopathy (DR) is a highly threatening microvascular complication of diabetes mellitus. Diabetic patients must be screened annually for DR; however, it is practically not viable due to the high volume of patients, lack of resources, economic burden, and cost of the screening procedure. The use of machine learning (ML) classifiers in medical science is an emerging frontier and can help in assisted diagnosis. The few available proposed models perform best when used in similar population cohorts and their external validation has been questioned. Therefore, the purpose of our research is to classify the DR using different ML methods on Saudi diabetic data, propose the best method based on accuracy and identify the most discriminative interpretable features using the socio-demographic and clinical information. This cross-sectional study was conducted among 327 diabetic patients in Almajmaah, Saudi Arabia. Socio-demographic and clinical data were collected using a systematic random sampling technique. For DR classification, ML algorithm including, linear discriminant analysis, support vector machine, K nearest neighbor, random forest and its variate ranger random forest classifiers were used through cross-validation resampling procedure. In classifying DR, ranger random forest outperforms the other methods by accurately classifying 86% of the DR patients on the test data. HbA1c (p<0.001) and duration of diabetes (p<0.001) were the most influential risk factor that best discriminated the DR patients. Other influential risk factors were the body mass index (p<0.001), age-onset (p<0.001), age (p<0.001), systolic blood pressure (p<0.05), and the use of medication (p<0.05) that significantly discriminated the DR patients. Based on the present study findings, integrating ophthalmology and ML can transform diagnosing the disease pattern that can help generate a compelling clinical effect. ML can be used as an added tool for clinical decision-making and must not be the sole substitute for a clinician. We will work to examine the classification performance of multi-class data using more sophisticated ML methods.

Aggregate is the most extracted material from the world's mines and widely used in civil and construction projects. The Micro-Deval abrasion test (MD) is one of the most important tests that provides characteristics of crushed aggregates that show their resistance against mechanical abrasive factors such as repeated impact loading. The impact of various factors on abrasive resistance properties of aggregates has led researchers to seek correlations, often focusing on limited data samples, leading to reduced accuracy. This study employs machine learning (ML) methods to predict MD abrasion values, considering diverse aggregate properties. Various ensemble ML methods were applied, revealing the exceptional performance of the stacking model, which achieved an R2 score of 0.95 in predicting aggregate abrasion resistance. The feature importance analysis highlights the influence of factors such as Magnesium Sulfate Soundness (MSS), Water Absorption (ABS), and Los Angeles Abrasion (LAA) on aggregate abrasion values, suggesting that the use of multiple test methods could yield a more dependable assessment of aggregate durability.

Nowadays, with the advancement of technology, the use of news sources has also undergone a great evolution. News sources have constantly evolved from past to present, ranging from magazines to radios, from newspapers to televisions. The fact that it has become so easy to access news has caused society to pay more attention to fake news. Fake news has the ability to influence society through news sources such as social media, which can reach wider audiences with the development of technology. The difficulties of users in accessing accurate and reliable sources in this information flow that shapes their daily lives increases the potential for the spread of fake news, and it becomes increasingly difficult to distinguish between real and fake news. In this study, classification models for fake news detection were designed using machine learning algorithms. The dataset, which includes fake and real news examples, contains 42,000 examples. Each class, including fake and real samples, contains 22,000 sample data. In order to increase data quality, accuracy and usability, preprocessing methods were applied to the data set. The removal of numbers, stop words, and html tags was done in the pre-processing step to remove unnecessary information from the text. Models were created for fake news detection with singular and ensemble classification algorithms. Performance evaluation of the models was performed using 5-fold cross-validation. In the performance comparisons of the models, values such as accuracy, sensitivity, specificity, tp rate and fp rate were calculated. The highest performance results were observed in the random forest classification algorithm with an accuracy rate of 76%.

Fake news analysis and detection is a method that requires using machine learning classifiers to recognize and detect news content as fake or real. No research work has been carried out on fake news analysis and detection using the machine learning algorithms using Truncated singular value decomposition (TSVD) on the ‘ISOT Fake News Dataset’ but there is a need for a better design that can provide better accuracy. This research aims to develop and use systematic progression in identifying fake news analysis using machine learning algorithms with TSVD. The machine learning algorithms which include the light Gradient Boosting Machine, Cat boosting classifier, and support vector machine with TSVD were used on ‘The ISOT Fake News Dataset’ to recognize the fake news from real news in the dataset, thereby improving the performance of these classifiers by cleaning the data to manage the data imbalances more efficiently. The recommended design yields an exactness of 97.33%. The postulated technique out classifies the current classifiers which possess an exactness of 95.05%. We recommend that Machine learning classifiers using TSVD should be applied in Fake News analysis and detection since it gives a better performance accuracy in fake news analysis and detection

Landslide disaster risk reduction necessitates the investigation of different geotechnical causal factors for slope failures. Machine learning (ML) techniques have been proposed to study causal factors across many application areas. However, the development of ensemble ML techniques for identifying the geotechnical causal factors for slope failures and their subsequent prediction has lacked in literature. The primary goal of this research is to develop and evaluate novel feature selection methods for identifying causal factors for slope failures and assess the potential of ensemble and individual ML techniques for slope failure prediction. Twenty-one geotechnical causal factors were obtained from 60 sites (both landslide and non-landslide) spread across a landslide-prone area in Mandi, India. Relevant causal factors were evaluated by developing a novel ensemble feature selection method that involved an average of different individual feature selection methods like correlation, information-gain, gain-ratio, OneR, and F-ratio. Furthermore, different ensemble ML techniques (Random Forest (RF), AdaBoost (AB), Bagging, Stacking, and Voting) and individual ML techniques (Bayesian network (BN), decision tree (DT), multilayer perceptron (MLP), and support vector machine (SVM)) were calibrated to 70% of the locations and tested on 30% of the sites. The ensemble feature selection method yielded six major contributing parameters to slope failures: relative compaction, porosity, saturated permeability, slope angle, angle of the internal friction, and in-situ moisture content. Furthermore, the ensemble RF and AB techniques performed the best compared to other ensemble and individual ML techniques on test data. The present study discusses the implications of different causal factors for slope failure prediction.

Background and aimsThe birth weight of a newborn is a crucial factor that affects their overall health and future well-being. Low birth weight (LBW) is a widespread global issue, which the World Health Organization defines as weighing less than 2,500 g. LBW can have severe negative consequences on an individual’s health, including neonatal mortality and various health concerns throughout their life. To address this problem, this study has been conducted using BDHS 2017–2018 data to uncover important aspects of LBW using a variety of machine learning (ML) approaches and to determine the best feature selection technique and best predictive ML model.MethodsTo pick out the key features, the Boruta algorithm and wrapper method were used. Logistic Regression (LR) used as traditional method and several machine learning classifiers were then used, including, DT (Decision Tree), SVM (Support Vector Machine), NB (Naïve Bayes), RF (Random Forest), XGBoost (eXtreme Gradient Boosting), and AdaBoost (Adaptive Boosting), to determine the best model for predicting LBW. The model’s performance was evaluated based on the specificity, sensitivity, accuracy, F1 score and AUC value.ResultsResult shows, Boruta algorithm identifies eleven significant features including respondent’s age, highest education level, educational attainment, wealth index, age at first birth, weight, height, BMI, age at first sexual intercourse, birth order number, and whether the child is a twin. Incorporating Boruta algorithm’s significant features, the performance of traditional LR and ML methods including DT, SVM, NB, RF, XGBoost, and AB were evaluated where LR, had a specificity, sensitivity, accuracy and F1 score of 0.85, 0.5, 85.15% and 0.915. While the ML methods DT, SVM, NB, RF, XGBoost, and AB model’s respective accuracy values were 85.35%, 85.15%, 84.54%, 81.18%, and 84.41%. Based on the specificity, sensitivity, accuracy, F1 score and AUC, RF (specificity = 0.99, sensitivity = 0.58, accuracy = 85.86%, F1 score = 0.9243, AUC = 0.549) outperformed the other methods. Both the classical (LR) and machine learning (ML) models’ performance has improved dramatically when important characteristics are extracted using the wrapper method. The LR method identified five significant features with a specificity, sensitivity, accuracy and F1 score of 0.87, 0.33, 87.12% and 0.9309. The region, whether the infant is a twin, and cesarean delivery were the three key features discovered by the DT and RF models, which were implemented using the wrapper technique. All three models had the identical F1 score of 0.9318. However, “child is twin” was recognized as a significant feature by the SVM, NB, and AB models, with an F1 score of 0.9315. Ultimately, with an F1 score of 0.9315, the XGBoost model recognized “child is twin” and “age at first sex” as relevant features. Random Forest again beat the other approaches in this instance.ConclusionsThe study reveals Wrapper method as the optimal feature selection technique. The ML method outperforms traditional methods, with Random Forest (RF) being the most effective predictive model for Low-Birth-Weight prediction. The study suggests that policymakers in Bangladesh can mitigate low birth weight newborns by considering identified risk factors.

Gesture recognition is a topic in computer science and language technology that aims to interpret human gestures with computer programs and many different algorithms. It can be seen as the way computers can understand human body language. Today, the main interaction tools between computers and humans are still the keyboard and mouse. Gesture recognition can be used as a tool for communication with the machine and interaction without any mechanical device such as a keyboard or mouse. In this paper, we present the results of a comparison of eight different machine learning (ML) classifiers in the task of human hand gesture recognition and classification to explore how to efficiently implement one or more tested ML algorithms on an 8-bit AVR microcontroller for on-line human gesture recognition with the intention to gesturally control the mobile robot. The 8-bit AVR microcontrollers are still widely used in the industry, but due to their lack of computational power and limited memory, it is a challenging task to efficiently implement ML algorithms on them for on-line classification. Gestures were recorded by using inertial sensors, gyroscopes, and accelerometers placed at the wrist and index finger. One thousand and eight hundred (1800) hand gestures were recorded and labelled. Six important features were defined for the identification of nine different hand gestures using eight different machine learning classifiers: Decision Tree (DT), Random Forests (RF), Logistic Regression (LR), Linear Discriminant Analysis (LDA), Support Vector Machine (SVM) with linear kernel, Naïve Bayes classifier (NB), K-Nearest Neighbours (KNN), and Stochastic Gradient Descent (SGD). All tested algorithms were ranged according to Precision, Recall, and F1-score (abb.: P-R-F1). The best algorithms were SVM (P-R-F1: 0.9865, 0.9861, and 0.0863), and RF (P-R-F1: 0.9863, 0.9861, and 0.0862), but their main disadvantage is their unusability for on-line implementations in 8-bit AVR microcontrollers, as proven in the paper. The next best algorithms have had only slightly poorer performance than SVM and RF: KNN (P-R-F1: 0.9835, 0.9833, and 0.9834) and LR (P-R-F1: 0.9810, 0.9810, and 0.9810). Regarding the implementation on 8-bit microcontrollers, KNN has proven to be inadequate, like SVM and RF. However, the analysis for LR has proved that this classifier could be efficiently implemented on targeted microcontrollers. Having in mind its high F1-score (comparable to SVM, RF, and KNN), this leads to the conclusion that the LR is the most suitable classifier among tested for on-line applications in resource-constrained environments, such as embedded devices based on 8-bit AVR microcontrollers, due to its lower computational complexity in comparison with other tested algorithms.

P125. Development of a novel ensemble machine learning algorithm for prediction of complications and readmission after anterior cervical spinal fusion

Nowadays, current events related to diverse fields are published in newspapers, shared on social media and broadcasted on radio and television. The explosive growth in online news contents has made it very difficult to discriminate between real and fake. As a result, fake news has become prevalent and immensely challenging to analyze and verify. Indeed, it is a big challenge to the government and public to debate the situation depending on case to case. For this purpose, a mechanism has to be taken on fact-checking rumors and statements particularly those that get thousands of views and likes before being debunked and refuted by expert sources. Various machine learning techniques have been used to detect and classify fake news. However, these approaches are restricted in terms of accuracy. This study has applied a random forest (RF) classifier to predict fake or real news. For this purpose, twenty-three (23) textual features are extracted from ISOT Fake News Dataset. Four best feature selection techniques like chi2, univariate, information gain and feature importance are used to select fourteen best features out of twenty-three. The proposed model and other benchmark techniques are evaluated on benchmark dataset using best features. Experimental findings show that the proposed model outperformed state-of-the-art machine learning techniques such as GBM, XGBoost and Ada Boost Regression Model in terms of classification accuracy.

In today’s interconnected digital landscape, the proliferation of fake news has become a significant challenge, with far-reaching implications for individuals, institutions, and societies. The rapid spread of misleading information undermines the credibility of genuine news outlets and threatens informed decision-making, public trust, and democratic processes. Recognizing the profound relevance and urgency of addressing this issue, this research embarked on a mission to harness the power of machine learning to combat fake news menace. This study develops an ensemble machine learning model for fake news classification. The research is targeted at spreading fake news. The research subjects are machine learning methods for misinformation classification. Methods: we employed three state-of-the-art algorithms: LightGBM, XGBoost, and Balanced Random Forest (BRF). Each model was meticulously trained on a comprehensive dataset curated to encompass a diverse range of news articles, ensuring a broad representation of linguistic patterns and styles. A distinctive feature of the proposed approach is the emphasis on token importance. By leveraging specific tokens that exhibited a high degree of influence on classification outcomes, we enhanced the precision and reliability of the developed models. The empirical results were both promising and illuminating. The LightGBM model emerged as the top performer among the three, registering an impressive F1-score of 97.74% and an accuracy rate of 97.64%. Notably, all three of the proposed models consistently outperformed several existing models previously documented in academic literature. This comparative analysis underscores the efficacy and superiority of the proposed ensemble approach. In conclusion, this study contributes a robust, innovative, and scalable solution to the pressing challenge of fake news detection. By harnessing the capabilities of advanced machine learning techniques, the research findings pave the way for enhancing the integrity and veracity of information in an increasingly digitalized world, thereby safeguarding public trust and promoting informed discourse.

Recently, fake news has been widely spread through the Internet due to the increased use of social media for communication. Fake news has become a significant concern due to its harmful impact on individual attitudes and the community’s behavior. Researchers and social media service providers have commonly utilized artificial intelligence techniques in the recent few years to rein in fake news propagation. However, fake news detection is challenging due to the use of political language and the high linguistic similarities between real and fake news. In addition, most news sentences are short, therefore finding valuable representative features that machine learning classifiers can use to distinguish between fake and authentic news is difficult because both false and legitimate news have comparable language traits. Existing fake news solutions suffer from low detection performance due to improper representation and model design. This study aims at improving the detection accuracy by proposing a deep ensemble fake news detection model using the sequential deep learning technique. The proposed model was constructed in three phases. In the first phase, features were extracted from news contents, preprocessed using natural language processing techniques, enriched using n-gram, and represented using the term frequency–inverse term frequency technique. In the second phase, an ensemble model based on deep learning was constructed as follows. Multiple binary classifiers were trained using sequential deep learning networks to extract the representative hidden features that could accurately classify news types. In the third phase, a multi-class classifier was constructed based on multilayer perceptron (MLP) and trained using the features extracted from the aggregated outputs of the deep learning-based binary classifiers for final classification. The two popular and well-known datasets (LIAR and ISOT) were used with different classifiers to benchmark the proposed model. Compared with the state-of-the-art models, which use deep contextualized representation with convolutional neural network (CNN), the proposed model shows significant improvements (2.41%) in the overall performance in terms of the F1score for the LIAR dataset, which is more challenging than other datasets. Meanwhile, the proposed model achieves 100% accuracy with ISOT. The study demonstrates that traditional features extracted from news content with proper model design outperform the existing models that were constructed based on text embedding techniques.

BackgroundFunctioning and non-functioning adrenocortical adenoma are two subtypes of benign adrenal adenoma, and their differential diagnosis is crucial. Current diagnostic procedures use an invasive method, adrenal venous sampling, for endocrinologic assessment.MethodsThis study proposes establishing an accurate differential model for subtyping adrenal adenoma using computed tomography (CT) radiomic features and machine learning (ML) methods. Dataset 1 (289 patients with adrenal adenoma) was collected to develop the models, and Dataset 2 (54 patients) was utilized for external validation. Cuboids containing the lesion were cropped from the non-contrast, arterial, and venous phase CT images, and 1,967 features were extracted from each cuboid. Ten discriminative features were selected from each phase or the combined phases. Random forest, support vector machine, logistic regression (LR), Gradient Boosting Machine, and eXtreme Gradient Boosting were used to establish prediction models.ResultsThe highest accuracies were 72.7%, 72.7%, and 76.1% in the arterial, venous, and non-contrast phases, respectively, when using radiomic features alone with the ML classifier of LR. When features from the three CT phases were combined, the accuracy of LR reached 83.0%. After adding clinical information, the area under the receiver operating characteristic curve increased for all the machine learning methods except for LR. In Dataset 2, the accuracy of LR was the highest, reaching 77.8%.ConclusionThe radiomic features of the lesion in three-phase CT images can potentially suggest the functioning or non-functioning nature of adrenal adenoma. The resulting radiomic models can be a non-invasive, low-cost, and rapid method of minimizing unnecessary testing in asymptomatic patients with incidentally discovered adrenal adenoma.

Since cyberbullying impacts both individual victims and entire society, research on abusive language and its detection has attracted attention in recent years. Because social media sites like Facebook, Instagram, Twitter, and others are so widely accessible, hate speech, bullying, sexism, racism, aggressive material, harassment, poisonous comments, and other types of abuse have all substantially increased. Due to the critical requirement to detect, regulate, and limit the spread of harmful content on social networking sites, we conducted this study to automate the detection of offensive language or cyberbullying. We created a new Arabic balanced data set to be used in the offensive detection process because having a balanced data set for a model would result in improved accuracy models. Recently, the performance of single classifiers has been improved using ensemble machine learning. The purpose of this study is to examine the effectiveness of several single and ensemble machine learning algorithms in identifying Arabic text that contains foul language and cyberbullying. Applying them to three Arabic datasets, we have selected three machine learning classifiers and three ensemble models for this aim. Two of them are offensive datasets that are readily accessible in the public, while the third one was created. The results showed that the single learner machine learning strategy is inferior to the ensemble machine learning methodology. Voting performs is the best performing trained ensemble machine learning classifier, outperforming the best single learner classifier (65.1%, 76.2%, and 98%) for the same datasets with accuracy scores of (71.1%, 76.7%, and 98.5%) for each of the three datasets used. Finally, we improve the voting technique’s performance through hyperparameter tuning on the Arabic cyberbullying data set.