Bio-inspired benchmark generator for extracellular multi-unit recordings

The evolution of a Software Product Line (SPL) typically affects a variety of artifact types. The intensity (the frequency and the amount) in which developers change variability information in these different types of artifacts is currently unknown. In this paper, we present a fine-grained approach for the variability-centric extraction and analysis of changes to code, build, and variability model artifacts introduced by commits. This approach complements existing work that is typically based on a feature-perspective and, thus, abstracts from this level of detail. Further, it provides a detailed understanding of the intensity of changes affecting variability information in these types of artifacts. We apply our approach to the Linux kernel revealing that changes to variability information occur infrequently and only affect small parts of the analyzed artifacts. Further, we outline how these results may improve certain analysis and verification tasks during SPL evolution.

iVoLVER, the Interactive Visual Language for Visualization Extraction and Reconstruction, is a web-based pen-and-touch interface that graphically supports construction of interactive visualizations. iVoLVER is designed to enable data extraction from different types of artifacts (e.g., photos) and to use that data to generate original representations of that data. People can create visualizations from data that is not structured in traditional formats without the need of textual programming or sitting at their desk. This demonstration shows how iVoLVER visualizations are constructed and also demonstrates the possible uses of iVoLVER in several contexts.

Problematic deposits, containing different types of artifacts and skeletal remains, are typically recovered on or near the surfaces of the terminal phase of elite civic-ceremonial architecture at ancient Maya sites. These contexts often date to the Terminal Classic period (~a.d.750–900). They have been variously interpreted as evidence for site abandonment, squatting, warfare, or dedication or termination rituals. Sixteen chert bifaces were recovered from problematic deposits at the bases of Structures A2 and A3 in the elite Plaza A at Cahal Pech, Belize. Stone tools from problematic deposits are rarely examined in significant detail. Based on stylistic, metric, and use-wear analyses, the bifaces were likely produced locally, used during important hunting or warfare activities, and then ritually deposited in the Terminal Classic. These bifaces were likely hafted to spearthrower darts and represented “success” at hunting or fighting. The recovery of weaponry in problematic deposits that is not the direct result of warfare is an important observation because Mayanists have generally interpreted their presence in these contexts as evidence of warfare. The fact that the points were recovered in groups of seven and nine may indicate that they had important symbolic meanings that connected them to supernatural or mythological places or entities.

Pigment analysis in Bronze Age Aegean and Eastern Mediterranean painted plaster by laser-induced breakdown spectroscopy (LIBS)

In this revised and updated edition of his 1989 book, Peter Dorrell provides a comprehensive guide to the uses of photography in archaeology. Drawing on thirty-five years of experience, he examines the use of photography in field archaeology, in surveys, in archaeological laboratories, and in conservation. He offers a clear and well-illustrated explanation of the techniques involved, with sections on equipment and materials, survey and site photography, architectural photography, the recording of different types of artifacts, registration and storage, the use of ultra-violet and infra-red, and photography for publication. He also covers the growing use of video and electronic recording systems.

Cone beam computed tomography (CBCT) allows for rapid and accessible acquisition of three-dimensional images with a lower radiation dose compared to conventional computed tomography (CT) scans. However, the quality of CBCT images is limited by a variety of artifacts. This systematic review attempts to explore different artificial intelligence-based solutions for enhancing the quality of CBCT scans and reducing different types of artifacts in these three-dimensional images. PubMed, Web of Science, Scopus, Embase, Cochrane, and Google Scholar were searched up to March 2025. Risk of bias of included studies was assessed using the QUADAS-II tool. Extracted data included bibliographic information, aim, imaging modality, anatomical site of interest, artificial intelligence modeling approach and details, data and dataset details, qualitative and quantitative performance metrics, and main findings. A total of 27 papers from 2018 to 2025 were included. These studies focused on five areas: metal artifact reduction, scatter correction, image reconstruction improvement, motion artifact reduction, and noise reduction. Artificial intelligence models mainly used U-Net variants, though hybrid and transformer-based models were also explored. The thoracic region was the most analyzed, and the structural similarity index measure and peak signal-to-noise-ratio were common performance metrics. Data availability was limited, with only 26% of studies providing public access and 15% sharing model source codes. Artificial intelligence-driven approaches have demonstrated promising results for CBCT artifact reduction. This review highlights a wide variability in performance assessments and that most studies have not received diagnostic validation, limiting conclusions on the true clinical impact of these artificial intelligence-based improvements.

Medical imaging is an essential and valuable tool in modern medicine for providing essential details on the internal structures and functioning of the human body. Although very useful, the raw images obtained from medical imaging systems usually contain different types of artifacts and noise that might hide some essential diagnostic information. In this paper, the author details the conventional and non-conventional methods as well as sophisticated deep learning research methods used in improving the quality of healthcare images. The paper also delves into strategies designed to elevate the visual quality and interpretability in medical diagnostics. The paper includes some latest case studies to illustrate the usefulness of these strategies in the clinical context. This is classically imclinically importantportant because of the blend between essential information and high-level research that this review provides, thus making it an indispensable tool for students, researchers, and professionals who aim to enhance their understanding and knowledge about medical image processing technology.

In the context of sensor-based data analysis, the compensation of image artifacts is a challenge. When the structures of interest are not clearly visible in an image, algorithms that can cope with artifacts are crucial for obtaining the desired information. Thereby, the high variation of artifacts, the combination of different types of artifacts, and their similarity to signals of interest are specific issues that have to be considered in the analysis. Despite the high generalization capability of deep learning-based approaches, their recent success was driven by the availability of large amounts of labeled data. Therefore, the provision of comprehensive labeled image data with different characteristics of image artifacts is of importance. At the same time, applying deep neural networks to problems with low availability of labeled data remains a challenge. This work presents a data-centric augmentation approach based on generative adversarial networks that augments the existing labeled data with synthetic artifacts generated from data not present in the training set. In our experiments, this augmentation leads to a more robust generalization in segmentation. Our method does not need additional labeling and does not lead to additional memory or time consumption during inference. Further, we find it to be more effective than comparable augmentations based on procedurally generated artifacts and the direct use of real artifacts. Building upon the improved segmentation results, we observe that our approach leads to improvements of 22% in the F1-score for an evaluated detection problem. Having achieved these results with an example sensor, we expect increased robustness against artifacts in future applications.

EEG and MEG primers for tracking DBS network effects

Objective: The activity of the brain can be recorded by means of an electroencephalogram (EEG). An EEG is a multichannel signal related to brain activity. However, EEG presents a wide variety of undesired artefacts. Removal of these artefacts is often done using blind source separation methods (BSS) and mainly those based on Independent Component Analysis (ICA). ICA-based methods are well-accepted in the literature for filtering artefacts and have proved to be satisfactory in most scenarios of interest. Our goal is to develop a generic and unsupervised ICA-based algorithm for EEG artefacts removal. Approach: The proposed algorithm makes use of a new unsupervised artefact detection, ICA and a statistical criterion to automatically select the artefact related independent components (ICs) requiring no human intervention. The algorithm is evaluated using both simulated and real EEG data with artefacts (SEEG and AEEG). A comparison between the proposed unsupervised selection of ICs related to the artefact and other supervised selection is also presented. Main results: A new unsupervised ICA-based algorithm to filter artefacts, where ICs related to each artefact are automatically selected. It can be used in online applications, it preserves most of the original information among the artefacts and removes different types of artefacts. Significance: ICA-based methods for filtering artefacts prevail in the literature. The work in this article is important insofar as it addresses the problem of automatic selection of ICs in ICA-based methods. The selection is unsupervised, avoiding the manual ICs selection or a learning process involved in other methods. Our method is a generic algorithm that allows removing EEG artefacts of various types and, unlike some ICA-based algorithms, it retains most of the original information among the artefacts. Within the algorithm, the artefact detection method implemented does not require human intervention either.

Routinely recorded electrocardiograms (ECGs) are often corrupted by different types of artefacts and many efforts have been made to enhance their quality by reducing the noise or artefacts. This pa...

Reconstructing high dynamic range (HDR) images of a complex scene involving moving objects and dynamic backgrounds is prone to artifacts. A large number of methods have been proposed that attempt to alleviate these artifacts, known as HDR deghosting algorithms. Currently, the quality of these algorithms are judged by subjective evaluations, which are tedious to conduct and get quickly outdated as new algorithms are proposed on a rapid basis. In this paper, we propose an objective metric which aims to simplify this process. Our metric takes a stack of input exposures and the deghosting result and produces a set of artifact maps for different types of artifacts. These artifact maps can be combined to yield a single quality score. We performed a subjective experiment involving 52 subjects and 16 different scenes to validate the agreement of our quality scores with subjective judgements and observed a concordance of almost 80%. Our metric also enables a novel application that we call as hybrid deghosting, in which the output of different deghosting algorithms are combined to obtain a superior deghosting result.

Aim/Purpose: To discuss the Design Science Research approach by comparing some of its canons with observed practices in projects in which it is applied, in order to understand and structure it better. Background: Recent criticisms of the application of the Design Science Research (DSR) approach have pointed out the need to make it more approachable and less confusing to overcome deficiencies such as the unrealistic evaluation. Methodology: We identified and analyzed 92 articles that presented artifacts developed from DSR projects and another 60 articles with preceding or subsequent actions associated with these 92 projects. We applied the content analysis technique to these 152 articles, enabling the preparation of network diagrams and an analysis of the longitudinal evolution of these projects in terms of activities performed and the types of artifacts involved. Contribution: The content analysis of these 152 articles enabled the preparation of network diagrams and an analysis of the longitudinal evolution of these projects in terms of the activities and types of artifacts involved. Evidence was found of a precedence hierarchy among different types of artifacts, as well as nine new opportunities for entry points for the continuity of DSR studies. Only 14% of the DSR artifacts underwent an evaluation by typical end users, characterizing a tenth type of entry point. Regarding the evaluation process, four aspects were identified, which demonstrated that 86% of DSR artifact evaluations are unrealistic. Findings: We identified and defined a set of attributes that allows a better characterization and structuring of the artifact evaluation process. Analyzing the field data, we inferred a precedence hierarchy for different artifacts types, as well as nine new opportunities for entry points for the continuity of DSR studies. Recommendation for Researchers: The four attributes identified for analyzing evaluation processes serve as guidelines for practitioners and researchers to achieve a realistic evaluation of artifacts. Future Research: The nine new entry points identified serve as an inspiration for researchers to give continuity to DSR projects.

Electroencephalogram (EEG) is used to measure the bioelectric potential on the brain scalp. The recorded EEG signal can have different types of artifacts and the interpretation of a noisy EEG signal is difficult. In this research work, a simple method is proposed to minimize the artifacts present in the EEG signals recorded while perceiving a pure tone. The recorded EEG signal can contain artifacts, such as movement artifacts, muscle contraction artifacts and saturation artifacts. In the proposed method, fractal dimension based features with different interval length and time-domain based energy features were extracted from the EEG signals with and without simulated noise. Using the extracted features, neural network models were developed to classify the EEG signal as a normal or a noisy signal. Further, the performance of the model is also evaluated in terms of classification rate. From the results, it is observed that the neural network model developed with the combined fractal dimension features of interval length 2,3,4,5 and 6 with frame size 128 has the highest classification accuracy of 95.5%.

Post-mortem artefacts (misleading signs) are one of the commonly encountered problems in routine autopsy. They lead to wrong interpretation of findings in large number of medico-legal cases especially at the hands of an inexperienced autopsy surgeon. Responsibility of correct interpretation of artefacts lies on medical jurist. Any type of artefacts must be interperated correctly as it may adversely affect post-mortem findings. Any change produced or feature introduced in a body after death which is accidentally or physiologically unrelated to the natural state of the body is termed as artefacts. This may adversely affect the course of justice in the court of law. The underlying biological processes that a human body or its remains undergoes after death are complex and, as with other biological phenomena, there is a broad range of variables influencing post-mortem changes by the alteration of the underlying progress of tissue destruction. The understanding of the artefacts is of great importance for the forensic pathologist and medical examiner as a such artefacts may be introduced before death (therapeutic artefacts), at the time of death (agonal artefacts) or after death (post-mortem artefacts) So it is recommended that all the physician concerned with medico-legal works, especially autopsies, should have detailed knowledge with these artefacts. Purpose of present review paper is to discuses and update the knowledge about different types of artefacts commonly encountered during the post-mortem examination. This paper also attempts to highlight the more important and common ones as far as known.