Bioactive glass scaffolds: biological interactions and applications in tissue engineering

In vivo evaluation of cerium, gallium and vanadium-doped borate-based bioactive glass scaffolds using rat subcutaneous implantation model

7 - Bioactive glass foams for tissue engineering applications

Regeneration of articular cartilage remains challenging. The aim of this study was to increase the stability of pure bioactive glass (BG) scaffolds by means of solvent phase polymer infiltration and to maintain cell adherence on the glass struts. Therefore, BG scaffolds either pure or enhanced with three different amounts of poly(D-L-lactide-co-glycolide) (PLGA) were characterized in detail. Scaffolds were seeded with primary porcine articular chondrocytes (pACs) and human mesenchymal stem cells (hMSCs) in a dynamic long-term culture (35 days). Light microscopy evaluations showed that PLGA was detectable in every region of the scaffold. Porosity was greater than 70%. The biomechanical stability was increased by polymer infiltration. PLGA infiltration did not result in a decrease in viability of both cell types, but increased DNA and sulfated glycosaminoglycan (sGAG) contents of hMSCs-colonized scaffolds. Successful chondrogenesis of hMSC-colonized scaffolds was demonstrated by immunocytochemical staining of collagen type II, cartilage proteoglycans and the transcription factor SOX9. PLGA-infiltrated scaffolds showed a higher relative expression of cartilage related genes not only of pAC-, but also of hMSC-colonized scaffolds in comparison to the pure BG. Based on the novel data, our recommendation is BG scaffolds with single infiltrated PLGA for cartilage tissue engineering.

Bioactive glass S53P4 in treatment of osteomyelitis: A report of 6 clinical cases

This article presents data related to the research article entitled “The effect of coating type on mechanical properties and controlled drug release of PCL/zein coated 45S5 bioactive glass scaffolds for bone tissue engineering” [1]. We provide data on mechanical properties, in vitro bioactivity and drug release of bioactive glass (BG) scaffolds coated by poly (ε-caprolactone) (PCL) and zein used as a controlled release device for tetracycline hydrochloride (TCH). By coating the BG scaffolds with PCL or PCL/zein blend the mechanical properties of the scaffolds were substantially improved, i.e., the compressive strength increased from 0.004±0.001 MPa (uncoated BG scaffolds) to 0.15±0.02 MPa (PCL/zein coated BG scaffolds). A dense bone-like apatite layer formed on the surface of PCL/zein coated scaffolds immersed for 14 days in simulated body fluid (SBF). The data describe control of drug release and in vitro degradation behavior of coating by engineering the concentration of zein. Thus, the developed scaffolds exhibit attractive properties for application in bone tissue engineering research.

Bioactive glasses are often designed as porous implantable templates in which newly-formed bone can grow in three dimensions (3D). This research work aims to investigate the bone regenerative capability of silicate bioactive glass scaffolds produced by robocasting in comparison with powder and granule-like materials (oxide system: 47.5SiO2-10Na2O-10K2O-10MgO-20CaO-2.5P2O5, mol.%). Morphological and compositional analyses performed by scanning electron microscopy (SEM), combined with energy dispersive spectroscopy (EDS) after the bioactivity studies in a simulated body fluid (SBF) confirmed the apatite-forming ability of the scaffolds, which is key to allowing bone-bonding in vivo. The scaffolds exhibited a clear osteogenic effect upon implantation in rabbit femur and underwent gradual resorption followed by ossification. Full resorption in favor of new bone growth was achieved within 6 months. Osseous defect healing was accompanied by the formation of mature bone with abundant osteocytes and bone marrow cells. These in vivo results support the scaffold’s suitability for application in bone tissue engineering and show promise for potential translation to clinical assessment.

Composite 3D scaffolds combining natural polymers and bioceramics are promising candidates for bone tissue engineering (BTE). Zein, as a natural plant protein, offers several advantages, including biocompatibility, adequate strength properties, and low/no immunogenicity; however, it lacks bioactivity. Thus, composite zein: bioactive glass (BG) scaffolds are proposed as promising candidate for BTE applications, with silver-doping of bioactive glass providing an antibacterial effect against possible post-implantation infection. Therefore, the aim of this study was to investigate the in vitro antibacterial properties, biocompatibility, bioactivity and compressive strength of zein scaffolds containing silver-doped bioactive glass. BG nanoparticles, undoped and Ag-doped, were fabricated using the sol-gel method. 3D composite zein:BG scaffolds, containing 20 wt% BG, were prepared and their antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) was assessed using the disc diffusion assay. Human osteoblast-like MG-63 cells were used to evaluate the in vitro biocompatibility of the prepared scaffold groups. In addition, the compressive strength of the scaffolds was determined using uniaxial compression strength testing and the scaffold interconnected porosity was measured using helium pycnometer. Disc diffusion assay showed that only zein scaffolds containing Ag-doped sol-gel BG are antibacterially positive against E. coli and S. aureus. Pure zein scaffolds and zein scaffolds containing sol-gel-derived BG showed no negative influence on the growth of MG-63 cells, as evident by the cells’ ability to survive, proliferate, and function on these scaffolds. Moreover, incorporating sol-gel-derived BG into zein scaffolds at zein:BG of 80:20 ratio showed bioactive properties with adequate porosity without affecting the scaffolds’ compressive strengths, which was similar to that of trabecular bone, suggesting that the new composites have potential for BTE applications in non-loaded bearing areas.

Highly porous novel chondro-instructive bioactive glass scaffolds tailored for cartilage tissue engineering

The magnetic and macro/mesoporous bioactive glasses scaffolds are synthesised successfully by the combination of coral and P123 as co-templates through an evaporation-induced self-assembly process. The prepared material can induce the precipitation of hydroxyapatite layers on their surface in SBF only within 12 h. At the same time, the material exhibited excellent super-paramagnetic and mechanical property. Furthermore, the biocompatible assessment confirmed that the obtained material presented the good biocompatibility and the enhanced adherence of HeLa cells. Herein, the novel materials are expected to have potential application for bone tissue engineering.

ABSTRACTIntroduction: The applications of naturally obtained polymers are tremendously increased due to them being biocompatible, biodegradable, environmentally friendly and renewable in nature. Among them, polyhydroxyalkanoates are widely studied and they can be utilized in many areas of human life research such as drug delivery, tissue engineering, and other medical applications.Areas covered: This review provides an overview of the polyhydroxyalkanoates biosynthesis and their possible applications in drug delivery in the range of micro- and nano-size. Moreover, the possible applications in tissue engineering are covered considering macro- and microporous scaffolds and extracellular matrix analogs.Expert commentary: The majority of synthetic plastics are non-biodegradable so, in the last years, a renewed interest is growing to develop alternative processes to produce biologically derived polymers. Among them, PHAs present good properties such as high immunotolerance, low toxicity, biodegradability, so, they are promisingly using as biomaterials in biomedical applications.

In situ and ex situ modifications of bacterial cellulose for applications in tissue engineering

Bioactive glasses are widely used in biomedical applications due to their ability to bond to bone and even to soft tissues. In this study, borate based (13-93B3) bioactive glass powders containing up to 5 wt% Ce2O3 and Ga2O3 were prepared by the melt quench technique. Cerium (Ce+3) and gallium (Ga+3) were chosen because of their low toxicity associated with bacteriostatic properties. Bioactive glass scaffolds were fabricated using the polymer foam replication method. In vitro degradation and bioactivity of the scaffolds were evaluated in SBF under static conditions. Results revealed that the cerium- and gallium-containing borate glasses have much lower degradation rates compared to the bare borate glass 13-93B3. In spite of the increased chemical durability, substituted glasses exhibited a good in vitro bioactive response except when the Ce2O3 content was 5 wt%. Taking into account the high in vitro hydroxyapatite forming ability, borate glass scaffolds containing Ce+3 and Ga+3 therapeutic ions are promising candidates for bone tissue engineering applications.

Tissue engineering (TE) is a modern approach to improve or restore tissues that has been diseased or damaged by combining the factors in growth signaling and appropriate cells to form compatible biomaterial scaffold. Bone repair has been a major global health challenge in recent decades. Bone transplantation is widely used as an effective clinical treatment for this purpose. However, there are several serious issues with transplantation, including a shortage of autologous bone, immune rejection, the risk of virus transmission with allogeneic bone, and postoperative complications. In recent years, scaffolds for bone tissue engineering have emerged as a promising alternative for bone repair. These scaffolds have porous structures that mimic the extracellular matrix, which can enhance the migration, proliferation, and differentiation of osteoblasts. This process accelerates the repair of bone defects.The usage of bioactive materials has become important tool in tissue engineering and regenerative medicine application as they are to mimic tissues mechanically, chemically, and physically. Polymeric scaffold provides numerous advantageous for tissue engineering since the physicochemical properties such as porosity, pore size, solubility and biocompatibility can be controlled. Therefore, research works were carried out to explore the potential of various materials in producing bone scaffolds in tissue engineering technology. As for both newcomers and experts, this review paper will help them to find information on various types of biomaterials in imparting or enhancing their biological properties such as biocompatibility, bacterial inhibition, tissue regeneration and cell growth, bio inertness, bioactive and resorbability for bone scaffold tissue engineering application.

In the field of bone tissue engineering, there has been an increasing interest in biomedical materials with both high angiogenic ability and osteogenic ability. Among various osteogenesis materials, bioactive borosilicate and borate glass scaffolds possess suitable degradation rate and mechanical strength, thus drawing many scholars' interests and attention. In this study, we fabricated bioactive glass scaffolds composed of borosilicate 2B6Sr using the Template-Method and incorporated Dimethyloxalylglycine (DMOG), a small-molecule angiogenic drug possessing good angiogenic ability, to improve bone regeneration. The in-vitro studies showed that porous borosilicate bioactive glass scaffolds released slowly, a steady amount of DMOG and stimulated the proliferation and osteogenic differentiation of human bone marrow stromal cells hBMSCs. In-vivo studies showed that the borosilicate bioactive glass scaffolds could significantly promote new bone formation and neovascularization in rats' calvarial bone defects. These results indicated that DMOG-incorporated bioactive glass scaffold is a successful compound with excellent angiogenesis-osteogenesis ability, which has favorable clinical prospects.

Differently to most chemically synthesized medical materials, polyhydroxyalkanoates (PHAs) are intracellular carbon and energy storage granules, which is a family of natural bio‐polymers synthesized by microorganism's materials. Due to excellent biocompatibility reasonable biodegradability and versatile material difference, PHAs are well medical biomaterials candidates for applications in tissue engineering and drug delivery, including commercial PHB, PHBV, PHBHHx, PHBVHHx, P34HB and few uncommercial PHAs. Electrospinning nanofibers with the size of 10–10,000 nm can improve the mechanical properties and decrease the crystallinity of PHA, meanwhile simulate the structure and function of native extracellular matrix of cells. Hence, PHAs electrospinning nanofibers as engineered scaffolds have been widely used for tissue engineering scaffolds in cardiovascular, vascular, nerve, bone, cartilage and skin; also, as carriers for application in drug delivery system. In this review, we highlight the extraction and properties of medical PHAs from natural or engineered microorganism, and microstructure, current manufacturing techniques and medical applications of electrospinning nanofibers of PHAs. Moreover, the current challenges and prospects of PHAs electrospinning nanofibers are discussed rationally, providing an insight into developing vibrant fields of PHAs electrospinning nanofibers‐based biomedicine.