Brain–computer interfaces using capacitive measurement of visual or auditory steady-state responses

A classification algorithm of an SSVEP brain-Computer interface based on CCA fusion wavelet coefficients

Brain-computer interface (BCI) systems have emerged as an augmentative technology that can provide a promising solution for individuals with motor dysfunctions and for the elderly who are experiencing muscle weakness. Steady-state visually evoked potentials (SSVEPs) are widely adopted in BCI systems due to their high speed and accuracy when compared to other BCI paradigms. In this paper, we apply combined magnitude and phase features for class discrimination in a real-time SSVEP-based BCI platform. In the proposed real-time system users gain control of a motorised bed system with seven motion commands and an idle state. Experimental results amongst eight participants demonstrate that the proposed real-time BCI system can successfully discriminate between different SSVEP signals achieving high information transfer rates (ITR) of 82.73 bits/min. The attractive features of the proposed system include noninvasive recording, simple electrode configuration, excellent BCI response and minimal training requirements.

The application of the brain-computer interface (BCI) is massively helpful and advantageous for disabled people. Moreover, BCI is an arrangement of software and hardware interface that provides a direct interaction between the human brain and computer devices. Therefore, in this article, A steady state visual evoked potential (SSVEP)-based BCI system is presented to identify SSVEP components from multi-channel electroencephalogram (EEG) data by minimizing background noise using an adaptive spatial filtering method. Here, the proposed adaptive spatial filtering-based SSVEP component extraction (ASFSCE) model improves reproducibility among multiple trails and identifies targets efficiently by optimizing the Eigenvalue problem. Along with that, the proposed ASFSCE model minimizes computational complexity from O(G<sup>2</sup>) to to get high target identification accuracy with faster execution. Performance results are measured using the SSVEP dataset. In this dataset, 11 subjects are used to perform experiments and 256-channel EEG data is taken. The efficiency of the proposed ASFSCE model is measured in terms of mean target detection accuracy and mean information transfer rate (ITR) in bits per minute. The average detection accuracy and ITR are evaluated by considering 23 trials for each subject. The obtained detection accuracy is 93.47% and ITR is 308.23 bpm.

Brain-computer interface (BCI) systems translate the human neurophysiological activities into commands through EEG analysis. Improving the BCI performances leads to faster and easier use and less fatigue. In this study, we proposed a new prepossessing approach to increase the robustness of a steady-state visual evoked potential (SSVEP) based BCI. Inspiring from the known properties of the SSVEP frequency components, the goal was to enhance the signal quality by making it more convenient to be interpreted by the decision-making step. We first investigated the potential to detect the deteriorating periods based on the physiological properties of the SSVEP. The proposed system localizes the intervals which can obscure the SSVEP frequencies by a new algorithm founded on the processing and the analysis of the instantaneous phase. The piecewise linear regression allows a sampler comprehension of the phase signal. Then, these intervals are filtered by the moving average filter to enhance the SSVEP quality. Finally, the decision making is made by the canonical correlation analysis (CCA) algorithm. The results of experiments, using real EEG signals from five subjects, show that the proposed approach significantly increases the performances in terms of accuracy and information transfer rate by about 7.3% and 3.85 bits/min, respectively, in case of 2 s segment length. On the other hand, the spatial filtering methods of the literature weaken the system performances.

Brain Computer Interfacing (BCI) systems, which are a new communicating channel between humans and the computers are growing rapidly. One such a method is based on the Steady State Visual Evoked Potentials (SSVEP), which can be recorded during visual stimulating of the subject by a twinkling light source with a fixed frequency. An important parameter to be considered is the effect of the inter-sources distance on the accuracy of such BCI systems. In particular inter-sources (LEDs) distances of 4, 14, 24, 44 and 64 cm when the sources plane is located 60 cm away from the subject's eyes (producing inter-sources visual angles of 3.8°, 13.4°, 22.6°, 40.2° and 56° respectively) were examined. In addition, four different sweep lengths of 0.5, 1, 2 and 3 seconds are considered. In addition, due to the usage of the AR models for feature extraction from the SSVEP signals, selection of the best AR model together with the best classifier among the LDA, the SVM and the Naive Bayes are studied. It is showed that the BCI system with D=44 cm, AR order of 13 and either the LDA or the SVM classifiers could produce the best results compared to the other cases.

To enhance the information transfer rate (ITR) of a steady-state visual evoked potential (SSVEP)-based speller, more characters with flickering symbols should be used. Increasing the number of symbols might reduce the classification accuracy. A hybrid brain-computer interface (BCI) improves the overall performance of a BCI system by taking advantage of two or more control signals. In a simultaneous hybrid BCI, various modalities work with each other simultaneously, which enhances the ITR. In our proposed speller, simultaneous combination of electromyogram (EMG) and SSVEP was applied to increase the ITR. To achieve 36 characters, only nine stimulus symbols were used. Each symbol allowed the selection of four characters based on four states of muscle activity. The SSVEP detected which symbol the subject was focusing on and the EMG determined the target character out of the four characters dedicated to that symbol. The frequency rate for character encoding was applied in the EMG modality and latency was considered in the SSVEP modality. Online experiments were carried out on 10 healthy subjects. The average ITR of this hybrid system was 96.1 bit/min with an accuracy of 91.2%. The speller speed was 20.9 char/min. Different subjects had various latency values. We used an average latency of 0.2 s across all subjects. Evaluation of each modality showed that the SSVEP classification accuracy varied for different subjects, ranging from 80% to 100%, while the EMG classification accuracy was approximately 100% for all subjects. Our proposed hybrid BCI speller showed improved system speed compared with state-of-the-art systems based on SSVEP or SSVEP-EMG, and can provide a user-friendly, practical system for speller applications.

Visual evoked potential (VEP)-related EEG signals have attracted widespread attention in the construction of brain-computer interface (BCI) systems. However, long-term use of the BCI system is prone to fatigue. Effectively coping with fatigue is the key to expanding BCI application scenarios. In this brief, we conduct two VEP experiments and propose a novel, concise and practical convolutional neural network (CNN) model to study and solve this problem. In detail, firstly, in terms of the stimulus frequencies in VEP experiments, we intercept the spectrum sequences of the fundamental waves and two harmonics. All these spectrum sequences are then paralleled input into the proposed multi-harmonic linkage CNN (MHLCNN) model, through three branches. Finally, the linkage characteristics of multiple harmonics are combined for VEP signal classification. The experimental results demonstrate that the proposed model shows good scalability, and can respectively improve the average classification accuracy by 23.17% and 15.85% when applied to steady-state VEP (SSVEP) signals in fatigue state and steady-state motion VEP (SSMVEP) signals, compared with the benchmark methods. All these provide a feasible and high-quality solution for reducing the impact of fatigue on the performance of VEP-based BCI systems.

Estimating and approaching the maximum information rate of noninvasive visual brain-computer interface

Recently, brain-computer interface (BCI) systems developed based on steady-state visual evoked potential (SSVEP) have attracted much attention due to their high information transfer rate (ITR) and increasing number of targets. However, SSVEP-based methods can be improved in terms of their accuracy and target detection time. We propose a new method based on canonical correlation analysis (CCA) to integrate subject-specific models and subject-independent information and enhance BCI performance. We propose to use training data of other subjects to optimize hyperparameters for CCA-based model of a specific subject. An ensemble version of the proposed method is also developed for a fair comparison with ensemble task-related component analysis (TRCA). The proposed method is compared with TRCA and extended CCA methods. A publicly available, 35-subject SSVEP benchmark dataset is used for comparison studies and performance is quantified by classification accuracy and ITR. The ITR of the proposed method is higher than those of TRCA and extended CCA. The proposed method outperforms extended CCA in all conditions and TRCA for time windows greater than 0.3 s. The proposed method also outperforms TRCA when there are limited training blocks and electrodes. This study illustrates that adding subject-independent information to subject-specific models can improve performance of SSVEP-based BCIs.

BackgroundBridging the gap between laboratory brain-computer interface (BCI) demonstrations and real-life applications has gained increasing attention nowadays in translational neuroscience. An urgent need is to explore the feasibility of using a low-cost, ease-of-use electroencephalogram (EEG) headset for monitoring individuals’ EEG signals in their natural head/body positions and movements. This study aimed to assess the feasibility of using a consumer-level EEG headset to realize an online steady-state visual-evoked potential (SSVEP)-based BCI during human walking.MethodsThis study adopted a 14-channel Emotiv EEG headset to implement a four-target online SSVEP decoding system, and included treadmill walking at the speeds of 0.45, 0.89, and 1.34 meters per second (m/s) to initiate the walking locomotion. Seventeen participants were instructed to perform the online BCI tasks while standing or walking on the treadmill. To maintain a constant viewing distance to the visual targets, participants held the hand-grip of the treadmill during the experiment. Along with online BCI performance, the concurrent SSVEP signals were recorded for offline assessment.ResultsDespite walking-related attenuation of SSVEPs, the online BCI obtained an information transfer rate (ITR) over 12 bits/min during slow walking (below 0.89 m/s).ConclusionsSSVEP-based BCI systems are deployable to users in treadmill walking that mimics natural walking rather than in highly-controlled laboratory settings. This study considerably promotes the use of a consumer-level EEG headset towards the real-life BCI applications.

Brain-Computer Interfacing (BCI) systems can be used to improve the quality of life of disabled individuals. Electroencephalography (EEG) Steady-State Visual Evoked Potentials (SSVEP) based BCI systems provide a non-invasive, inexpensive method of communication and control with minimal user training. Among many applications of BCI systems, robot control is widely used to restore motor functions of individuals with severe neuromuscular disabilities. In this paper, a low-cost, single-channel, SSVEP based BCI system is implemented to control the motion of the wrist and the gripper of a robot arm. The SSVEP user commands are generated by focusing the user's gaze on a set of light-emitting diodes (LED) flickering at different frequencies. For the identification of user intent to generate control commands, a classification algorithm is proposed, which is based on Euclidean distance measurement between prominent peaks of the SSVEP Fast Fourier Transform (FFT) spectrum, and the fundamental and harmonic spectral content of stimulus frequency.

Purpose: Brain-Computer Interface (BCI) Speller systems help people with mobility impairments improve their cognitive and physical abilities. Steady-State Visual Evoked Potential (SSVEP) signals have been used to build high-speed BCI speller systems. SSVEP signals are a subtype of Visual Evoked Potential (VEP), a form of co-frequency, and the harmonics response elicited by a specific frequency stimulus. Noise and artifacts are critical issues for target detection in SSVEP-based BCI systems.
 Materials and Methods: Thus, it is essential to provide target detection techniques that operate well in the presence of noises. One solution for overcoming the noise impact is to employ approaches that automatically extract the appropriate features for target detection from the training data. Deep Convolutional Neural Network (DCNN) was utilized in this study to automatically extract features from SSVEP data in noisy conditions. Moreover, the BETA database, which contains SSVEP data from 70 individuals collected outside of the electromagnetic shielding room, was used. In this regard, a suitable DCNN structure for target stimulus frequency identification was first designed. The network was pre-trained with part of the data from the BETA database. Finally, at the single-subject level, this pre-trained network was retrained and evaluated.
 Results: The results showed that after retraining, the accuracy and Information Transfer Rate (ITR) increased (p-value < 0.01) for all participants.
 Conclusion:.The enhancement in accuracy and ITR are 25.72% and 43.10 bpm, respectively.

The steady-state visual evoked potential (SSVEP) has been widely applied in brain-computer interfaces (BCIs), such as letter or icon selection and device control. Most of these BCIs used different flickering frequencies to evoke SSVEP with different frequency components that were used as control commands. In this paper, a novel method combining the time phase and EEG frequency components is presented and validated with nine healthy subjects. In this method, four different frequency components of EEG were classified out from four time phases. When the SSVEP is evoked and what is the frequency of the SSVEP is determined by the linear discriminant analysis (LDA) classifier in the same time to locate the target image. The results from offline analysis show that this method yields good performance both in classification accuracy and information transfer rate (ITR).KeywordsBrain-computer interfaces (BCIs)Electroencephalogram (EEG)Steady-state visual evoked potential (SSVEP)Time phase

Brain–computer interfaces (BCIs), also known as brain–machine interfaces (BMIs), translate brain activity into new outputs that replace, restore, enhance, supplement or improve natural brain outputs. BCI research and development has grown rapidly for the past two decades. It is beginning to provide useful communication and control capacities to people with severe neuromuscular disabilities; and it is expanding into new areas such as neurorehabilitation that may greatly increase its clinical impact. At the same time, significant challenges remain, particularly in regard to translating laboratory advances into clinical use.

Brain-computer interfaces (BCIs) based on steady-state visual evoked potential (SSVEP) have attracted much attention due to their high efficiency and accuracy. The SSVEP paradigm and decoding methods have been extensively studied and achieved remarkable results. This study proposed two modulation methods for the SSVEP paradigm, namely color inversion modulation and brightness compression modulation. Color inversion modulation adjusts the stimulus to adapt to the changing background, while brightness compression modulation ensures high contrast by reducing the background brightness. Furthermore, we proposed Multi-scale Temporal-Spatial Global average pooling Neural Network (MTSGNN), an end-to-end network for decoding SSVEP signals evoked by the post-modulation paradigm. MTSGNN is built with efficient convolutional structures and uses global average pooling to achieve classification, which effectively reduces the risk of model overfitting on small EEG datasets and improves classification performance. We conduct experiments to evaluate the performance of the proposed modulation and decoding methods. Compared with color inversion modulation and no modulation, the brightness compression modulation method achieved the best performance. In addition, MTSGNN outperforms the best competitive decoding method by 11.98%, 3.9% and 5.15% under color inversion modulation, brightness compression modulation and no modulation, respectively. The experimental results demonstrate the effectiveness of the proposed modulation methods and the robustness of the proposed decoding method. This study significantly improves the performance of SSVEP in dynamic backgrounds and effectively expands the practical application scenarios of BCI.