Brain-tumor Classification Using ResNet50 Enhanced with SE and CBAM Attention Mechanisms

The primary focus of this research article is to advance convolutional neural networks (CNNs) through the incorporation of Squeeze and Excitation (SE) and Convolutional Block Attention Module (CBAM) blocks, with an emphasis on recalibrating channel wise features. This approach highlights channel relationships, with the SE block seamlessly integrated into a pre-trained DenseNet CNN model to recalibrate channel wise feature responses by explicitly modeling channel interdependencies. The study demonstrates the construction of SENet and CBAM architectures with SE and CBAM blocks on pretrained DenseNet models using transfer learning, achieving exceptional generalization on a cataract image dataset. The proposed architectures utilize layers of compressed network blocks that can establish direct connections with preceding layers through adjustable weight modifications. Comprehensive evaluations indicate that the DenseSE and DenseCBAM models both achieve 99% testing accuracy and exhibit strong performance across various metrics. Notably, DenseNet169 with SE and CBAM blocks attained 99% precision, surpassing the baseline model’s 95% precision. Furthermore, the Grad CAM technique enhances cataract disease identification, with the DenseCBAM and DenseSE models generating detailed heatmaps that support healthcare professionals in making swift and accurate retinal diagnoses.

In recent years, attention mechanisms have shown great potential in various computer vision tasks. However, most existing methods focus on developing more complex attention modules for better performance, which inevitably increases the complexity of the model. To overcome performance and complexity tradeoffs, this paper proposes efficient spatial and channel attention (ESCA), a symmetric, comprehensive, and efficient attention module. By analyzing squeeze-and-excitation (SE), convolutional block attention module (CBAM), coordinate attention (CA), and efficient channel attention (ECA) modules, we abandon the dimension-reduction operation of SE module, verify the negative impact of global max pooling (GMP) on the model, and apply a local cross-channel interaction strategy without dimension reduction to learn attention. We not only care about the channel features of the image, we also care about the spatial location of the target on the image, and we take into account the effectiveness of channel attention, so we designed the symmetric ESCA module. The ESCA module is effective, as demonstrated by its application in the ResNet-50 classification benchmark. With 26.26 M parameters and 8.545 G FLOPs, it introduces a mere 0.14% increment in FLOPs while achieving over 6.33% improvement in Top-1 accuracy and exceeding 3.25% gain in Top-5 accuracy. We perform image classification and object detection tasks on ResNet, MobileNet, YOLO, and other architectures on popular datasets such as Mini ImageNet, CIFAR-10, and VOC 2007. Experiments show that ESCA can achieve great improvement in model accuracy at a very small cost, and it performs well among similar models.

Medical image analysis is highly susceptible to noise during acquisition and transmission, significantly degrading diagnostic accuracy. This study proposes a robust Attention-Based Squeeze-Excitation Residual Autoencoder (ASE-RAE) for denoising medical images corrupted by Gaussian and Salt-and-Pepper (SP) noise. The network integrates residual skip connections in both encoder and decoder paths, combined with Squeeze-and-Excitation (SE) blocks and a Convolutional Block Attention Module (CBAM) to improve channel and spatial feature representation. The model is benchmarked against traditional denoising techniques, including Non-Local Means Filter (NLMF), Median Filter (MF), Wavelet Transform (WT), Gaussian Filter (GF), and Convolutional Neural Networks (CNNs). Quantitative evaluation using Peak Signal-to-Noise Ratio (PSNR), Structural Similarity Index Measure (SSIM), and Mean Squared Error (MSE) demonstrates that the proposed method consistently outperforms all baseline models across varying noise intensities (5%–75%) on the IQ-OTH/NCCD lung CT dataset. Furthermore, ablation studies confirm the contribution of each module (SE and CBAM) to performance gains. The proposed architecture preserves diagnostic features while suppressing both random and structured noise, and its convolutional SE implementation reduces computational overhead compared to conventional fully connected attention blocks. This work highlights a scalable, interpretable solution for image denoising in clinical workflows and sets a foundation for real-time deployment in AI-assisted diagnostics.

Brain-computer interfaces (BCI) allow for the brain to communicate with electronic devices. Concerning the BCI paradigms, motor imagery uses brain signals to decode an imagined movement. However, this is a hard task given the low signal-to-noise ratio. Usually, the main steps in BCI models are pre-processing, feature extraction, and classification. In recent years, Convolutional Neural Networks (CNNs) have been gaining relevance in several areas of science due to their feature extraction, translation invariance, and parameter sharing capa-bilities. Another, more recent way of feature extraction is using attention mechanisms, which are layers of neural networks based on human attention and have the ability to highlight important features. A variation of the attention mechanism is the Convolutional Block Attention Module, which combines the CNN structure with the attention mechanism. In this work, we propose a new model that joins the core architecture of EEGNet, a compact CNN widely used in the literature, with the Convolutional Block Attention Module and residual connections. The residual connections were introduced to lower data degradation throughout the model. The results highlight the residual connection's importance for the performance of the model. The proposed model obtained a kappa result 5.2% better than the EEGNet with a p-value less than 0.01 on BCI Competition IV dataset 2a, which is a well-known dataset for Motor Imagery. Furthermore, the proposal was better than EEGNet for most subjects and had the best-worst case.

With the continuous development of deep learning technologies, fault prediction techniques based on various neural networks have been evolving. The deep learning modules based on U-Net residual networks have shown significant advantages in both learning efficiency and effectiveness. In this paper, we propose a deep learning model that integrates a 3D U-Net residual architecture, Convolutional Block Attention Module (CBAM), and Multi-scale Enhanced Global Attention (MEGA) module for automatic seismic fault detection and segmentation. This model can effectively handle complex 3D seismic data, fully exploiting both spatial and channel information, significantly improving the prediction accuracy for small faults, while only slightly increasing the computational cost.Firstly, the model uses the 3D U-Net as the backbone framework, where the residual blocks (BasicRes) extract features through multiple convolution layers. The CBAM module is incorporated to apply attention weighting, enhancing the model's ability to focus on critical information. The CBAM module combines channel attention and spatial attention, effectively adjusting the importance of feature maps from different dimensions, enabling the model to identify potential fault features in complex seismic data.Secondly, the MEGA module is introduced into the model, which further improves the model's feature representation ability by fusing multi-scale features and applying a global attention mechanism. By weighting global information, the MEGA module helps the model better capture key seismic fault features during feature fusion. This design allows the model to focus not only on local details but also to fully utilize the global contextual information in 3D data, thereby enhancing the accuracy of fault detection.After validation, the model achieved promising results in seismic fault detection tasks, automatically identifying and segmenting fault structures in seismic data. The accuracy was improved from 80% with the original 3D U-Net residual network to 85%-87%. This provides strong support for applications such as seismic exploration and subsurface imaging.Keywords: Seismic Fault Detection, 3D U-Net, Convolutional Block Attention Module (CBAM), Multi-scale Enhanced Global Attention (MEGA), Deep Learning

Acquiring the growth information of tobacco plants quickly and accurately is an important prerequisite for their daily management. In view of the problem that the convolutional neural network is easily affected by background information, this study introduces the Convolutional Block Attention Module into the U <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2-</sup> Net. This method is mainly composed of an encoder and a decoder. Before the feature map is decoded, it will go through the Convolutional Block Attention Module to filter more important features and inhibit the invalid features. In the decoder, in order to fuse the features of objects in different scales, the feature maps in the decoder are up-sampled and then concatenated. This information aggregation solves the problem of difficult object detection at different scales to some extent. The results of this method are compared with four current mainstream deep learning models(U <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> -Net, DeeplabV3+, PSP-Net, U-Net). The result shows: 1) The U <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> -Net network based on the Convolutional Block Attention Module has the highest extraction accuracy for the UAV visible light remote senseing of tobacco(accuracy was 98.53%, recall was 96.00%,F1-Score was 96.38%, kappa coefficient was 0.95, IOU was 93.02%); 2)In the extraction of the three test areas, the extraction value of this method is highly consistent with the label area value(the area ratios of a total of 13 plants in the three regions were kept between 90% and 100%),the effect is much higher than that of DeeplabV3+ and PSP-Net, and slightly higher than the extraction effect of U <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> -Net and U-Net. 3)In the segmentation of three typical canopy closure regions of A, B, and C, most of the accuracy factors in different regions can reach 94% and above. It can be seen that the method in this study has certain advantages in feature extraction and has certain value in practical application.

This study aims to solve the problems of inaccurate weighing of bamboo sticks and inefficient manual counting. To overcome this problem, an improved MobileNetV3 model and a counting algorithm suitable for bamboo sticks—combined with a spatial-temporal attention mechanism—are proposed in this paper. Inspired by the idea of EfficientNet, scaling coefficients are used to scale the MobileNetV3 network structure as a whole in terms of width and height. The optimal model for bamboo-stick recognition is screened initially, and then the algorithm uses the convolutional block attention module (CBAM) attention mechanism to replace the squeeze-and-excitation (SE) attention mechanism in the MobileNetV3 network structure to allow the network to extract features in the two dimensions of channel and space. Since the number of bamboo sticks in a single image is extremely dense—generally around 1000–3000—it is difficult to effectively count them with existing algorithms. The proposed algorithm divides the image into multiple equally sized blocks and then uses the boundary processing algorithm to merge the cut bamboo stick images and count the number of sticks. Experimental results show that the proposed algorithm can effectively perform near real-time detection on a mobile terminal and its accuracy can reach approximately 97%, which is in line with actual production applications.

Background: The accurate classification between malignant and benign breast lesions detected on mammograms is a crucial but difficult challenge for reducing false-positive recall rates and improving the efficacy of breast cancer screening. Objective: This study aims to optimize a new deep transfer learning model by implementing a novel attention mechanism in order to improve the accuracy of breast lesion classification. Methods: ResNet50 is selected as the base model to develop a new deep transfer learning model. To enhance the accuracy of breast lesion classification, we propose adding a convolutional block attention module (CBAM) to the standard ResNet50 model and optimizing a new model for this task. We assembled a large dataset with 4280 mammograms depicting suspicious soft-tissue mass-type lesions. A region of interest (ROI) is extracted from each image based on lesion center. Among them, 2480 and 1800 ROIs depict verified benign and malignant lesions, respectively. The image dataset is randomly split into two subsets with a ratio of 9:1 five times to train and test two ResNet50 models with and without using CBAM. Results: Using the area under ROC curve (AUC) as an evaluation index, the new CBAM-based ResNet50 model yields AUC = 0.866 ± 0.015, which is significantly higher than that obtained by the standard ResNet50 model (AUC = 0.772 ± 0.008) (p < 0.01). Conclusion: This study demonstrates that although deep transfer learning technology attracted broad research interest in medical-imaging informatic fields, adding a new attention mechanism to optimize deep transfer learning models for specific application tasks can play an important role in further improving model performances.

Motivated by the increasing popularity and success of attention mechanisms, we observe that popular convolutional attention models like Squeeze-and-Excite (SE) and Convolutional Block Attention Module (CBAM) rely on expensive multi-layer perceptron (MLP) layers. These MLP layers significantly increase computational complexity, making such models less applicable to 3D image contexts, where the data dimensionality and computational costs are inherently higher. In 3D medical imaging, such as pulmonary CT scans, efficient processing is crucial due to the large volume of data. Traditional 2D attention mechanisms, when generalized to 3D, increase the computational load, creating a demand for more efficient attention mechanisms that can operate effectively within a 3D tasks. In this work, we investigate the possibility of incorporating fully convolutional attention within 3D context. Particularly, we present two 3D fully convolutional attention blocks in which we demonstrate effectiveness within the 3D context. We demonstrate effectiveness of the proposed method using the pulmonary CT scans for 3D lung nodule detection. Building on existing 3D nodule detection methods, we present AttentNet, an automated lung nodule detection framework from CT images that performs detection as an ensemble of two stages, candidate proposal stage (Region Proposal Network), in which a high number of candidates is produced, and a false positive reduction stage to reduce the number of false alarms. Throughout our work, we compare the proposed 3D convolutional attention blocks to a number of popular 2D convolutional attention mechanisms by generalizing them to 3D modules, including SE units and CBAM channel attention and spatial attention units. We also compare these to Transformer self-attention units. For the False positive reduction stage, we incorporate a joint analysis approach that considers the variable nodule morphology by aggregating spatial information from different contextual levels. We use LUNA-16 lung nodule detection dataset to demonstrate the benefits of using the proposed fully convolutional attention blocks comparing to baseline popular lung nodule detection methods where no attention is used. It is worth noting that our work does not aim at achieving state-of-the-art results in the lung nodule detection task, rather to demonstrate the benefits of incorporating fully convolutional attention within a 3D context.

As the core technologies represented by Internet of Things (IoT) technology and computer vision technology booming, object detection algorithms based on deep learning have received high attention in various fields. Object detection is not only a core problem in the field of computer vision, but also a prerequisite and basis for many computer vision tasks, and has important applications in the fields of autonomous driving and video surveillance. The task of object detection is to find all the targets of interest in an image and determine their category and location. Object detection includes two tasks: object classification and object localization. However, object classification focuses on the most discriminative part of the feature map, and object localization requires a feature map focusing on the whole region of the object. Therefore, in order to improve the detection accuracy, we propose a CBAM-RetinaNet network model.CBAM (Convolutional Block Attention Module) is a lightweight convolutional attention module, which combines channel and spatial attention mechanism modules. The channel attention module focuses on the meaningful information in the input image, which would lead to an increase in the accuracy of object classification. The spatial attention module focuses on the location information of the object, which may improve the accuracy of object localization. The experiment results show that the proposed achieves better object detection performance on the PASCAL VOC2007 dataset, and the accuracy is 2% higher than that of the RetinaNet model, which has good experimental results.

This study focuses on the optimization and practice of Convolutional Neural Networks (CNN) in image classification tasks. A deep neural network model was constructed by introducing the CBAM (Convolutional Block Attention Module) attention mechanism and residual structure. This model combines the stability of residual networks during training with the advantages of CBAM in feature extraction, aiming to improve image classification performance. The experiment used the CIFAR-10 dataset and achieved a testing accuracy of 86% through optimization methods such as data augmentation, batch normalization, reasonable control of the number of fully connected layers, and exponential decay learning rate strategy. The study also explored the effects of data augmentation, batch normalization layer utility, fully connected layer quantity control, residual structure effectiveness, and CBAM attention mechanism on model performance, providing valuable insights for optimizing CNN in image classification tasks.

BackgroundGrain count is crucial to wheat yield composition and estimating yield parameters. However, traditional manual counting methods are time-consuming and labor-intensive. This study developed an advanced deep learning technique for the segmentation counting model of wheat grains. This model has been rigorously tested on three distinct wheat varieties: ‘Bainong 307’, ‘Xinmai 26’, and ‘Jimai 336’, and it has achieved unprecedented predictive counting accuracy.MethodThe images of wheat ears were taken with a smartphone at the late stage of wheat grain filling. We used image processing technology to preprocess and normalize the images to 480*480 pixels. A CBAM-HRNet wheat grain segmentation counting deep learning model based on the Convolutional Block Attention Module (CBAM) was constructed by combining deep learning, migration learning, and attention mechanism. Image processing algorithms and wheat grain texture features were used to build a grain counting and predictive counting model for wheat grains.ResultsThe CBAM-HRNet model using the CBAM was the best for wheat grain segmentation. Its segmentation accuracy of 92.04%, the mean Intersection over Union (mIoU) of 85.21%, the category mean pixel accuracy (mPA) of 91.16%, and the recall rate of 91.16% demonstrate superior robustness compared to other models such as HRNet, PSPNet, DeeplabV3+ , and U-Net. Method I for spike count, which calculates twice the number of grains on one side of the spike to determine the total number of grains, demonstrates a coefficient of determination R2 of 0.85, a mean absolute error (MAE) of 1.53, and a mean relative error (MRE) of 2.91. In contrast, Method II for spike count involves summing the number of grains on both sides to determine the total number of grains, demonstrating a coefficient of determination R2 of 0.92, an MAE) of 1.15, and an MRE) of 2.09%.ConclusionsImage segmentation algorithm of the CBAM-HRNet wheat spike grain is a powerful solution that uses the CBAM to segment wheat spike grains and obtain richer semantic information. This model can effectively address the challenges of small target image segmentation and under-fitting problems in training. Additionally, the spike grain counting model can quickly and accurately predict the grain count of wheat, providing algorithmic support for efficient and intelligent wheat yield estimation.

Modulation recognition of single‐component radar signals has been widely studied in the fewer years. Meanwhile, as the electromagnetic environment in the actual battlefields is ever‐increasingly complicated, the demand for the modulation recognition of multi‐component radar signals is also increasing. However, the modulation recognition of single‐component radar signals performs poorly on multi‐component radar signals. To address this problem, a novel modulation recognition method of multi‐component radar signals based on the deep convolutional neural network with a convolutional block attention module (DCNN‐CBAM) is proposed, and the network architecture mainly includes mobile‐inverted bottleneck convolution (MBConv), Fused‐MBConv, and convolutional block attention module (CBAM). An adaptive optimization algorithm Adam with weighted gradient and dynamic bound is proposed for accelerating convergence speed and generalisation performance. The proposed method can not only recognise dual‐component and three‐component radar signals but also four‐component radar signals. The experimental results demonstrate that the recognition accuracies of all radar signals modulation types are more than 83.57% at −8 dB for dual‐component radar signals, 67.41% for three‐component radar signals, and 57.95% for four‐component radar signals, which verify the better recognition performance of DCNN‐CBAM for multi‐component radar signals. The recognition accuracy of the proposed DCNN‐CBAM for dual‐component radar signals can be up to 95.95% at −6 dB, which shows superior recognition performance over the residual method. This work provides an essential guidance for enhancing the recognition performance of multi‐component radar signals.

In order to realize the quantitative assessment of muscle strength in hand function rehabilitation and then formulate scientific and effective rehabilitation training strategies, this paper constructs a multi-scale convolutional neural network (MSCNN) - convolutional block attention module (CBAM) - bidirectional long short-term memory network (BiLSTM) muscle strength prediction model to fully explore the spatial and temporal features of the data and simultaneously suppress useless features, and finally achieve the improvement of the accuracy of the muscle strength prediction model. To verify the effectiveness of the model proposed in this paper, the model in this paper is compared with traditional models such as support vector machine (SVM), random forest (RF), convolutional neural network (CNN), CNN - squeeze excitation network (SENet), MSCNN-CBAM and MSCNN-BiLSTM, and the effect of muscle strength prediction by each model is investigated when the hand force application changes from 40% of the maximum voluntary contraction force (MVC) to 60% of the MVC. The research results show that as the hand force application increases, the effect of the muscle strength prediction model becomes worse. Then the ablation experiment is used to analyze the influence degree of each module on the muscle strength prediction result, and it is found that the CBAM module plays a key role in the model. Therefore, by using the model in this article, the accuracy of muscle strength prediction can be effectively improved, and the characteristics and laws of hand muscle activities can be deeply understood, providing assistance for further exploring the mechanism of hand functions .

Weeds are one of the primary factors that reduce crop productivity by competing for nutrients and water, causing the plant to lose weight and resulting in reduced grain yield. Traditional agricultural practices often rely on uniform herbicide application, which can contaminate soil and raise costs. On agricultural land, selective weed treatment are an efficient and cost-effective way to control weeds that require a deep learning-based crop and weed segmentation system. Many existing crop and weed segmentation research works focus on achieving precise crop and weed segmentation results, rather than building lightweight models to deploy on edge devices. To attain this, we develop an effective and efficient convolutional neural network, namely the Concatenated Attention U-Net with Convolutional Block Attention Module (CAUC). By integrating Linear Concatenated Blocks (LCB), Attention Gate (AG) connections, and Convolutional Block Attention Module (CBAM), the proposed model efficiently utilizes feature maps among its architectural components to achieve superior performance. Depth-wise convolution layers and 1 × 1 convolution layers in LCBs reduce computational complexity. To enable the proposed model to identify the weed portions in multiple crop fields, we integrated three datasets in this research work, namely the Crop/Weed Field Image Dataset (CWFID), Sugar Beet, and Sunflower datasets. Experimental results on carrot, sugar beet, and sunflower crop datasets demonstrate high Accuracy (99.09%), MIoU (81.02%), and F1-score (99.06%), with a modest model size (5.6 MB) and computational parameters (0.377 million). We developed a lightweight computer vision application (13.7 MB) to demonstrate the model’s efficacy on low-computational devices.