Pt Re Electrodes for AEM Water Electrolysis: Catalytic Insights and Performance Optimization for the Hydrogen Evolution Reaction
The urgent global imperative to mitigate climate change and transition towards sustainable energy sources has propelled the search for cost-effective alternatives to fossil fuels. Green hydrogen, produced via water electrolysis powered by renewable energy, stands as a promising solution in this endeavor. However, for green hydrogen to become a viable competitor to fossil fuels, it is crucial to drive down production costs. One promising avenue is thrifting precious group metal (PGM) electrocatalysts with more abundant and cost-effective metals, thereby reducing the overall cost of hydrogen production. In this context, the replacement, alloying, and thrifting of PGM materials hold significant potential. By leveraging cheaper and earth-abundant metals such as rhenium (Re) (currently, $2,000/Kg) and nickel (Ni) (currently, $20/Kg), respectively, in place of platinum (Pt) (currently, $31,000/Kg), the cost of green hydrogen production can be brought to a level that competes with fossil fuel prices [1], [2], [3]. This shift not only fosters sustainability but also reshapes global energy markets, steering them away from carbon-emitting sources towards clean, carbon-free alternatives like hydrogen. In this study, we explore the deployment of an anion exchange membrane water electrolyzer (AEMWE) cathodic hydrogen evolution reaction (HER) electrocatalyst: PtRe dispersed on a porous carbon support alloy (PtRe/C) as a potential replacement for conventional Pt on carbon (Pt/C) catalysts. We investigate two different loadings of PtRe/C (40-10 wt.% PtRe and 25-25 wt.% PtRe/C) and compare their performance against benchmark electrocatalysts, including 50 wt.% Pt/C and 30-3 wt.% PtNi/C. Through a comprehensive analysis involving X-ray Diffraction (XRD), Scanning Electron Microscopy – Energy Dispersive X-ray Spectroscopy (SEM-EDS), Inductively Coupled Plasma – Optical Emission Spectrometry (ICP-OES) and electrochemical characterization via Rotating Disk Electrode (RDE), Gas Diffusion Electrode (GDE) half-cell, and Membrane Electrode Assembly (MEA) testing, we demonstrate superior performance of PtRe/C alloys. In-house MEA testing revealed durability of 25-25 wt.% PtRe/C out to 100 h of continuous (steady state) operation at 1 A/cm2 at ~1.8 V with negligible voltage decay. Additionally, 40-10 wt.% PtRe/C performed exceptionally well with durability out to 100 h at 1 A/cm2 and 1.9 V. PtNi/C had the highest overvoltage of 1.95 V at continuous 1 A/cm2. Polarization curves (transient) reveal the best performing catalyst to be 25-25 wt.% PtRe, reaching a overvoltage of 1.7 V at 1 A/cm2 in beginning of life testing while 40-10 wt.% PtRe/C and PtNi/C perform comparably with 1.79 V and 1.83 V at 1 A/cm2 during polarization, respectively. Our findings underscore the potential of alloying and thrifting strategies in advancing the cost-effectiveness and efficiency of green hydrogen production, thereby contributing to the transition towards a sustainable energy future.
Read more