• Home
  • Search
  • Carbide‐Derived Carbon Monoliths with Hierarchical Pore Architectures
  • Cite Icon137
  • https://doi.org/10.1002/anie.201200024Copy DOI Icon

Carbide‐Derived Carbon Monoliths with Hierarchical Pore Architectures

Show More
  • Abstract
  • Literature Map
  • References
  • Citations
  • Similar Papers
Abstract

Porous carbon materials are crucial components in catalysis, gas storage, electronics, and biochemistry. A hierarchical pore architecture in these materials is essential to achieve high surface areas combined with advanced mass transport kinetics. Widely used approaches for the generation of microor mesopores are activation and nanocasting. In contrast, macroporous carbon materials are primarily obtained by carbonization of polymeric precursor gels or replication of larger templates. A relatively new class of microand mesoporous carbon material with tunable porosity are carbide-derived carbon materials (CDCs). High-temperature chlorination of carbides leads to selective removal of metalor semi-metal atoms and allows control over the pore size of the resulting CDCs in a subngstrcm range by changing synthesis conditions or the carbide precursor. These materials have been studied for applications in gas storage and as electrode materials in supercapacitors because of their high specific surface areas. Recently, metal etching from pyrolyzed pre-ceramic components (polysilsesquioxanes or polysilazanes) was found to be a useful route towards carbide-derived carbon materials with enhanced porosity and gas-storage properties. A significant step towards ultrahigh specific surface area combined with a hierarchical mesoporous–microporous system was achieved using nanocasting of silica templates (SBA-15 or KIT-6) with polycarbosilane precursors and subsequent chlorine treatment of the resulting ordered mesoporous silicon carbides. These ordered mesoporous CDCs offer specific surface areas as high as 2800 mg 1 and total pore volumes of up to 2 cmg . Their mesostructure can be easily controlled by changing the silica hard template, resulting in excellent performance in protein adsorption, gas storage, and as electrodes for supercapacitors. However, such carbon materials are available only as nonstructured micrometer-sized powders and cannot be shaped into films without the addition of binders or the use of high mechanical stress, leading to structural deformation. Chlorine treatment of mechanically mixed Si/SiC precursors was found to be a useful route towards monolithic CDC with a hierarchical pore system. The presence of a free metal phase in the precursor system provides the opportunity to introduce a secondary macroporosity of 3 mm sized channels with a volume of 0.23 cmg 1 along with the microporous carbide-derived carbon material system. The introduction of large transport pores in polymerbased CDCs might be an alternative way to form materials that combine high surface areas with efficient fluid transport. The current literature describes a variety of routes for the production of highly macroporous ceramics from precursor polymers with controllable cell and window sizes. In particular, direct blowing of polycarbosilanes was found to be a useful approach for the generation of silicon carbide foams that might be suitable materials for the production of hierarchical CDCs. In the following, we describe a novel synthesis route for monolithic carbide-derived carbon materials, including micro-, meso-, and macroporous structures with extremely high specific surface area. They can be obtained by hightemperature chlorination of macroporous polymer-derived silicon carbide (SiC-PolyHIPE). A soft-templating approach starting from a high internal phase emulsion (HIPE) was used with an external oil phase consisting of liquid polycarbosilane SMP-10 and the cross-linker paradivinylbenzene. Using Span-80 as surfactant to stabilize the internal water phase, the application of oxidic or carbon hard templates and the corresponding template removal under harsh conditions is no longer necessary. After cross-linking the polymer chains, the resulting PolyHIPEs were pyrolyzed to silicon carbides at maximum temperatures of 700, 800, and 1000 8C and subsequently converted into CDCs by chlorine treatment at the maximum pyrolysis temperature (Supporting [*] M. Oschatz, L. Borchardt, Dr. I. Senkovska, N. Klein, Dr. R. Frind, Prof. Dr. S. Kaskel Department of Inorganic Chemistry Dresden University of Technology Bergstrasse 66, 01062 Dresden (Germany) E-mail: stefan.kaskel@chemie.tu-dresden.de

Similar Papers
  • Research Article

(Invited) Electroreduction of Oxygen on Nitrogen-Doped Carbide-Derived Carbon Materials in Alkaline Media

  • Apr 15, 2017
  • Electrochemical Society Meeting Abstracts
  • Sander Ratso +7
  • Research Article
  • Citations19

Characterization and prediction of double-layer capacitance of nanoporous carbon materials using the Quantitative nano-Structure-Property Relationship approach based on experimentally determined porosity descriptors

  • Nov 06, 2019
  • Carbon
  • Maike Käärik +4
  • Research Article
  • Citations1

Fabrication of Nitrogen-Doped Porous Carbon from Covalent Organic Frameworks and the Electrocatalytic Activities for Oxygen Reduction Reaction

  • Sep 01, 2016
  • Electrochemical Society Meeting Abstracts
  • Gayoung Kim +2
  • PDF
  • Research Article
  • Citations50

Sol-gel processing of a covalent organic framework for the generation of hierarchically porous monolithic adsorbents

  • Aug 23, 2022
  • Chem
  • Mark E Carrington +16
  • Research Article
  • Citations14

Producing high quality carbide-derived carbon from low quality byproducts stemming from SiC production

  • Aug 06, 2015
  • Chemical Engineering Journal
  • Teguh Ariyanto +5
  • Research Article

Nanoporous IrO2 catalyst with Ultrahigh Specific Surface Area Synthesized through an Ammoniating Method for Acidic Oxygen Evolution

  • Sep 01, 2016
  • ECS Meeting Abstracts
  • Guoqiang Li +4
  • Research Article
  • Citations105

Facile preparation of porous carbons derived from orange peel via basic copper carbonate activation for supercapacitors

  • Jan 10, 2020
  • Journal of Alloys and Compounds
  • Liu Wan +6
  • Research Article
  • Citations753

An Isoreticular Series of Metal–Organic Frameworks with Dendritic Hexacarboxylate Ligands and Exceptionally High Gas‐Uptake Capacity

  • Jul 16, 2010
  • Angewandte Chemie International Edition
  • Daqiang Yuan +3
  • Research Article
  • Citations70

The applications of zeolitic imidazolate framework-8 in electrical energy storage devices: a review

  • Feb 08, 2017
  • Journal of Materials Science: Materials in Electronics
  • Xiaolong Xu +3
  • PDF
  • Research Article
  • Citations9

Application of imine covalent organic frameworks in sample pretreatment

  • Feb 01, 2022
  • Se pu = Chinese journal of chromatography
  • Hongmei Yuan +4
  • Research Article
  • Citations114

Highly crystalline MOF-based materials grown on electrospun nanofibers.

  • Jan 01, 2015
  • Nanoscale
  • M Bechelany +5
  • Research Article
  • Citations3

Preparation of hollow mesoporous carbon spheres and their performances for electrochemical applications

  • Mar 01, 2018
  • IOP Conference Series: Materials Science and Engineering
  • T Ariyanto +3
  • Research Article
  • Citations704

Nanoporous carbide-derived carbon with tunable pore size.

  • Aug 03, 2003
  • Nature Materials
  • Yury Gogotsi +7
  • Research Article
  • Citations54

Advanced carbon electrode for electrochemical capacitors

  • Feb 11, 2019
  • Journal of Solid State Electrochemistry
  • Yuya Kado +3
  • Research Article
  • Citations4

Praperation of magnetic Fe,N co-doped nano-sized graphitized carbon aerogel with hierarchical porous structure and its electrochemical and adsorption performance

  • Jul 13, 2021
  • Chinese Science Bulletin
  • Qihua Cao +4
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.